Stability of nickel bis(dicarbollide) complexes

1. Download : Download high-res image (92KB)
2. Download : Download full-size image

     

Anion-controlled nuclearity in nickel complexes with potentially dinucleating, poly(oxime) amine ligands

Two new ligands consisting of bis(oxime) amine units tethered by a bridge have been synthesized. Their nickel chloride and nickel nitrate complexes have also been synthesized and characterized by X-ray crystallography, FTIR, mass spectrometry, and elemental analysis. One of these ligands, L1 (N,N,N',N'-tetra(1-propan-2-onyl oxime)-diamino-m-xylene), is always dinucleating, while the other ligand, L2 (N,N,N',N'-tetra(1-propan-2-onyl-oxime)-1,3-diaminopropane), shows an unusual anion dependence on the nuclearity. When nickel chloride is used, the ligand acts in a dinucleating manner and coordinates two nickels; however, when nickel nitrate is used, the ligand acts in a monodentate fashion and coordinates only one nickel. Once the mononuclear complex is formed, it is not possible to add a second nickel if Ni(NO(3))(2) is used as the nickel source; it is possible, however, to add a second nickel if NiCl(2) is used as the nickel source. The dinuclear complex can be converted to the mononuclear one by either using silver nitrate to exchange the chloride anions for nitrates or by dissolving the complex in water. Ni(2)(L1)Cl(4)(DMF)(2).DMF: orthorhombic, P2(1)2(1)2(1), a = 12.2524(11) A, b = 16.6145(15) A, c = 20.1234(19) A, V = 4096.5(6) A(3), Z = 4. [Ni(2)(L2)Cl(4)(DMF)](2).2DMF: triclinic, P-1, a = 12.5347(5) A, b = 12.5403(5) A, c = 14.3504(6) A, alpha = 67.348(1) degrees , beta = 69.705(1) degrees , gamma = 81.549(1) degrees , V = 1952.25(14) A(3), Z = 1. Ni(L2).(NO(3))(2): monoclinic, P2(1)/n, a = 9.6738(3) A, b = 30.2229(9) A, c = 15.8238(5) A, beta = 97.995(1) degrees , V = 4581.4(2) A(3), Z = 8.     

Synthesis and characterization of nickel(II) bis(alkylthio)salen complexes

NiX2(2-RSC6H4CH=NCH2CH2N=CHC6H4SR-2) (NiX2L; L = 5) (1a, X = Br, R = C6H13; 1b, X = Cl, R = C12H25) and NiX2(2-C6H13SC6H4CH2NHCH2CH2NHCH2C6H4SC6H13-2) (NiX2L; L = 6) (2a, X = Br; 2b, X = Cl; 2c, X = OClO3) were prepared from ligands 5 and 6, respectively. The 1:2 metal-ligand complex Ni(OClO3)2(2-RSC6H4CH2NHCH2CH2NHCH2C6H4SR-2)2 3, was obtained from an EtOH solution of 2c. The characterization of paramagnetic 1-3 included single-crystal X-ray diffraction studies of 1a and 3. Complex 2c converted into 3 in the presence of excess ligand 6 in CHCl3.     

A method for the synthesis of nickel(0) bis(carbene) complexes

A new method leading to Ni(NHC)2 (NHC = IMes, IPri, SIPr(i), SIBu(t)) complexes in moderate to good yields, involves the reaction of NHC (pre-formed or generated in situ) with Ni(CH3)2(tmed), tmed = N,N'-tetramethylethylenediamine; in one case, the intermediate Ni[I(Me2)Pr(i)]2(CH3)2, I(Me2)Pr(i) = N,N'-diisopropyl-4,5-dimethylimidazol-2-ylidene, has been isolated and structurally characterised.     

Structural factors influencing linear M-H-M bonding in bis(dialkylphosphino)methane complexes of nickel

Structural data for four closely related dinuclear nickel hydride complexes have been compared in order to gain insight into the factors governing the Ni-H-Ni geometries. The derivatives [(dippm)2Ni2X2](mu-H) [dippm = 1,2-bis(diisopropylphosphino)methane] were found to contain a linear Ni-H-Ni bridge, whereas the derivatives [(dcpm)2Ni2X2](mu-H) [dcpm = 1,2-bis(dicyclohexylphosphino)methane] were found to contain a bent Ni-H-Ni bridge. The number of internal and interatomic CH-to-halide contacts of the former were much shorter and more numerous than the latter, suggesting an important role of external forces in bridging hydride geometries.     

Copper(II) and nickel(II) complexes of binucleating macrocyclic bis(disulfide)tetramine ligands

Novel macrocyclic bis(disulfide)tetramine ligands and several Cu(II) and Ni(II) complexes of them with additional ligands have been synthesized by the oxidative coupling of linear tetradentate N2S2 tetramines with iodine. Facile demetalation of the Ni(II) oxidation products affords the free 20-membered macrocycles meso-9 and rac-9 and the 22-membered macrocycle 16, all of which are potentially octadentate N4S4 ligands. X-ray structure analyses reveal distinctly different conformations for the two isomers of 9; meso-9 shows a stepped conformation in profile with the disulfide groups corresponding to the rise of the step, whereas rac-9 exhibits a V conformation with the disulfide groups near the vertex of the V. No metal complexes of rac-9 have been isolated. Crystallographic studies of three Cu(II) complexes reveal that depending upon the size of the macrocyclic ligand and the nature of the additional ligands (I-, NCO-, and CH3CN), the Cu(II) coordination geometry shows considerable variation (plasticity), with substantial changes in the Cu(II)-disulfide bonding. Thus, a diiodide salt contains six-coordinate Cu(II) to which all four bridging disulfide sulfur atoms form strong equatorial bonds. In contrast, isocyanato complexes of the 20- and 22-membered macrocycles exhibit trigonal-bipyramidal Cu(II) and distorted cis-octahedral Cu(II) geometries, respectively, having only one and no short equatorially bound sulfur atoms. The coordination geometry of the latter complex can also be described as four-coordinate seesaw with two semicoordinated S(disulfide) ligands. Disulfide-->Cu(II) ligand-to-metal charge transfer absorptions of both isocyanato-containing Cu(II) species appear too weak to observe, probably because of poor overlap of the sulfur orbitals with the Cu(II) d-vacancy. The dual disulfide-bridged Ni(II) units of the crystallographically characterized octahedral Ni(II) complex of meso-9 with axial iodide and acetonitrile ligands promote substantial antiferromagnetic coupling (J = -13.0(2) cm-1).     

Highly phosphorescent iridium complexes containing both tridentate bis(benzimidazolyl)-benzene or -pyridine and bidentate phenylpyridine: synthesis, photophysical properties, and theoretical study of Ir-bis(benzimidazolyl)benzene complex

Novel mixed-ligand Ir(III) complexes, [Ir(L)(NwedgeC)X]n+ (L = N/\C/\N or N/\N/\N; X = Cl, Br, I, CN, CH3CN, or -CCPh; n = 0 or 1), were synthesized, where N/\CwedgeN = bis(N-methylbenzimidazolyl)benzene (Mebib) and bis(N-phenylbenzimidazolyl)benzene (Phbib), N/\N/\N = bis(N-methylbenzimidazolyl)pyridine (Mebip), and N/\C = phenylpyridine (ppy) derivatives. The X-ray crystal structures of [Ir(Phbib)(ppy)Cl] and [Ir(Mebib)(mppy)Cl] [mppy = 5-methyl-2-(2'-pyridyl)phenyl] indicate that the nitrogen atom of the ppy ligand is located trans to the coordinating carbon atom in Me- or Phbib, while the coordinating carbon atom in ppy occupies the trans position of Cl. [Ir(Mebip)(ppy)Cl]+ showed a quasireversible Ir(III/IV) oxidation wave at +1.05 V, while the Ir complexes, [Ir(Mebib)(ppy)Cl], were oxidized at +0.42 V versus Fc/Fc+. The introduction of an Ir-C bond in [Ir(Mebib)(ppy)Cl] induces a large potential shift of 0.63 V in a negative direction. Further, the oxidation potential of [Ir(Mebib)(Rppy)X] was altered by the substitution of R, R', and X groups. Compared to the oxidation potential, the first reduction potential revealed an almost constant value at -2.36 to -2.46 V for [Ir(L)(ppy)Cl] (L = Mebib and Phbib) and -1.52 V for [Ir(Mebip)(ppy)Cl. The UV-vis spectra of [Ir(Mebib)(R-ppy)X] show a clear singlet metal-to-ligand charge-transfer transition around 407 approximately 425 nm and a triplet metal-to-ligand charge-transfer transition at 498 approximately 523 nm. [Ir(Mebip)(ppy)Cl]+ emits at 610 nm with a luminescent quantum yield of Phi = 0.16 at room temperature. The phosphorescence of [Ir(Mebib)(ppy)X] was observed at 526 nm for X = CN and 555 nm for X = Cl with the high luminescent quantum yields, Phi = 0.77 approximately 0.86, at room temperature. [Ir(Phbib)(ppy)Cl] shows the emission at 559 nm with a luminescent quantum yield of Phi = 0.95, which is an unprecedentedly high value compared to those of other emissive metal complexes. Compared to the luminescent quantum yields of the Ir(ppy)2(L) derivatives and [Ir(Mebip)(ppy)Cl]+, the neutral Ir complexes, [Ir(L)(R-ppy)X] (L = Me- or Phbib), reveal very high quantum yields and large radiative rate constants (kr) ranging from 3.4 x 10(5) to 5.5 x 10(5) s(-1). The density functional theory calculation suggests that these Ir complexes possess dominantly metal-to-ligand charge-transfer and halide-to-ligand charge-transfer excited states. The mechanism for a high phosphorescence yield in [Ir(bib)(ppy)X] is discussed herein from the perspective of the theoretical consideration of radiative rate constants using perturbation theory and a one-center spin-orbit coupling approximation.     

Structural diversity in the assembly of helicate-type nickel(II) complexes with enantiopure bis(beta-diketonate) ligands

The tartaric acid derived bis(beta-diketonate) ligand L affords either 2:3 or 3:2 ligand:metal complexes with nickel(II) ions depending on the stoichiometry of the components; the two complexes possess different electronic and geometric properties.     

Acetylacetonate bis(thiosemicarbazone) complexes of copper and nickel: towards new copper radiopharmaceuticals

A series of copper(II) and nickel(II) 1,3-bis(thiosemicarbazonato) complexes have been synthesised by the reaction of the metal acetates with pyrazoline proligands. In each case the complexes have an overall neutral charge with a dianionic ligand. The copper 1,3-bis(4-methyl-3-thiosemicarbazonato complex has been characterised by X-ray crystallography, which shows the copper is in an essentially square-planar symmetric N(2)S(2) environment. The nickel 1,3-bis(4-methyl-3-thiosemicarbazonato) and nickel 1,3-bis(4-phenyl-3-thiosemicarbazonato) complexes have been characterised by X-ray crystallography and show that in these cases the nickel is in a distorted square-planar environment, but the bonding mode of the ligands is unusual; the nickel binds to one of the aza-methinic nitrogen atoms and one hydrazinic nitrogen, creating one five-membered N-N-C-S-Ni chelate ring and one four-membered N-C-S-Ni chelate ring. Interestingly, the X-ray structure of the ethyl analogue [1,3-bis(4-ethyl-3-thiosemicarbazonato)nickel(II)] shows that in this case the nickel is symmetrically coordinated in the usual manner. The nickel complexes are diamagnetic and the different coordination modes are confirmed in solution by NMR spectroscopy. The complexes are susceptible to oxidation in air and a nickel complex, in which the central methylene carbon has been oxidised, has been characterised by X-ray crystallography and NMR spectroscopy. Electrochemical measurements show that the copper complexes undergo a reversible one-electron reduction at biologically accessible potentials.     

Synthesis,crystal structure and catalytic performance of bis (imino)pyridyl nickel complexes

Two new Ni(II) complexes of 2,6-bis[1-(2,6-diethylphenylimino)ethyl]pyridine (L¹), 2,6-bis[1-(4-methylphenylimino)ethyl]pyridine (L² ) have been synthesized and structurally characterized. Complex Ni(L¹)Cl₂?·?CH₃CN (1), exhibits a distorted trigonal bipyramidal geometry, whereas complex Ni(L¹)(CH₃CN)Cl₂ (2), is six-coordinate with a geometry that can best be described as distorted octahedral. The catalytic activities of complexes 1, 2, Ni{2,6-bis[1-(2,6-diisopropyl-phenylimino)ethyl]pyridine} Cl₂?·?CH₃CN (3), and Ni{2,6-bis[1-(2,6-dimethylphenylimino) ethyl]pyridine}Cl₂?·?CH₃CN (4), for ethylene polymerization were studied under activation with MAO.     

Si-H activation of hydrosilanes leading to hydrido silyl and bis(silyl) nickel complexes

A general route for the synthesis of novel NHC stabilized nickel bis(silyl) and nickel hydrido silyl complexes is presented. The reaction of [Ni(2)((i)Pr(2)Im)(4)(COD)] 1 ((i)Pr(2)Im = 1,3-di-isopropyl-imidazolin-2-ylidene) with hydrosilanes H(n)SiR(4-n) leads to complexes of the type [Ni((i)Pr(2)Im)(2)(SiH(n-1)R(4-n))(H)] or [Ni((i)Pr(2)Im)(2)(SiH(n-1)R(4-n))(2)].