Spectrophotometric analysis of selective serotonin reuptake inhibitors based on formation of charge-transfer complexes with tetracyanoquinodimethane and chloranilic acid

A simple, accurate, and sensitive spectrophotometric method for analysis of selective serotonin reuptake inhibitors (SSRIs) has been developed and validated. The analysis was based on the formation of colored charge-transfer complexes between the intact molecule of SSRI drug as an n-electron donor and each of tetracyanoquinodimethane (TCNQ) or p-chloranilic acid (pCA) as electron acceptors. The formed complexes were measured spectrophotometrically at 842 and 520 nm for TCNQ and pCA, respectively. Different variables and parameters affecting the reactions were studied and optimized. Under the optimum reaction conditions, linear relationships with good correlation coefficients (0.9975-0.9996) were found between the absorbances and the concentrations of the investigated drugs in the concentration ranges of 4-50 and 20-400 microg/mL with TCNQ and pCA, respectively. With all the investigated drugs, TCNQ gave more sensitive assays than pCA; the limits of assay detection were 2.5-4.8 and 20-40 microg/mL with TCNQ and pCA, respectively. The intra- and interassay precisions were satisfactory; the relative standard deviations did not exceed 2%. The proposed procedures were successfully applied to the analysis of the studied drugs in pure form and pharmaceutical formulations with good accuracy; the recovery values were 98.4-102.8 +/- 1.24-1.81%. The results obtained from the proposed method were statistically comparable with those obtained from the previously reported methods.     

Spectrophotometric determination of flucloxacillin and dicloxacillin in pure and dosage forms

A simple, rapid and accurate spectrophotometric method for the determination of antibiotic drugs, flucloxacillin (Fluclox) and dicloxacillin (Diclox), in pure form and different pharmaceutical preparations has been developed. The charge transfer (CT) reactions between Fluclox and Diclox as electron donors and 7,7,8,8-tetracyanoquinodimethane (TCNQ) and tetracyanoethylene (TCNE) as pi-acceptors to give highly coloured complex species have been spectrophotometrically studied. The optimum experimental conditions for these CT reactions have been studied carefully. Beer's law is obeyed over the concentration ranges of 4-180 microg mL(-1) and 4-70 microg mL(-1) for Fluclox and Diclox drugs using TCNQ and TCNE reagents, respectively. The Sandell sensitivities (S) are found to be 0.016-0.035 microg cm(-2) and 0.011-0.016 microg cm(-2) for Fluclox and Diclox, respectively, which indicate the high sensitivity of the proposed method. The relative standard deviations (R.S.D.: 0.08-0.49 and 0.15-0.80) for the determination of Fluclox and (R.S.D.: 0.05-0.75 and 0.13-0.75) for Diclox were obtained for four to six replicates using TCNQ and TCNE reagents, respectively, refer to the high accuracy and precision of the proposed method. These results are also confirmed by the between-day precision and the percent recovery of 99.90-100.1 and 99.60-100.4 for Fluclox and 99.90-100.5 and 99.40-100.1 for Diclox using TNCQ and TCNE reagents, respectively. The results obtained for the two reagents are comparable with those obtained by the official method.     

Use of pi-acceptors for spectrophotometric determination of dicyclomine hydrochloride

Simple, rapid, accurate, and sensitive spectrophotometric methods are described for the determination of dicyclomine hydrochloride. The methods are based on the reaction of this drug as an n-electron donor with 2,3-dichloro-5,6-dicyano-p-benzoqunione (DDQ), p-chloranilic acid (p-CA), and chloranil (CL) as pi-acceptors to give highly colored complex species. The colored products are measured spectrophotometrically at 456, 530, and 650 nm for DDQ, p-CA, and CL, respectively. Optimization of the different experimental conditions were studied. Beer's law was obeyed in concentration ranges of 20-100, 50-250, and 80-600 microg/mL for DDQ, pCA, and CL, respectively. Colored complexes are produced in organic solvents and are stable for at least 1 h. The methods were applied to Spasmorest antispasmotic tablets and ampoules with good accuracy and precision.     

Spectrophotometric determination of rifampicin through chelate formation and charge transfer complexation in pharmaceutical preparation and biological fluids

Two simple and accurate spectrophotometric methods for determination of Rifampicin (RIF) are described. The first method is based on charge transfer (CT) complex formation of the drug with three pi-electron acceptors either 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ), 7,7,7,8-Tetracyanoquinodimethane (TCNQ) or 2,3,5,6-Tetrachloro-1,4-benzoquinone (p-chloranil) in acetonitrile. The method is followed spectrophotometrically by measuring the maximum absorbance at 584 nm, 761 nm (680 nm) or 560 nm for DDQ, TCNQ and p-chloranil, respectively. Under the optimized experimental conditions, the calibration curves showed a linear relationship over the concentration ranges of 5-140 microg/ml, 2-45 microg/ml (5-120 microg/ml) and 15-200 microg/ml, respectively. The second method is based on the reaction of RIF with iron(III) forming a water insoluble violet complex which is extracted into chloroform. The method determines RIF in concentration range of 10-240 microg/ml at 540 nm. The proposed methods applied to determination of RIF in capsule, human serum and urine samples with good accuracy and precision. The results were compared statistically with the official method and showed no significant different between the methods compared in terms of accuracy and precision.     

Utility of some pi-acceptors for spectrophotometric determination of gatifloxacin in pure form and in pharmaceutical preparations

Four simple, quick and sensitive methods are described for the spectrophotometric determination of gatifloxacin. The methods are based on the reaction of gatifloxacin as n-electron donor with 7,7,8,8-tetracyanoquinodimethane (TCNQ); 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ); chloranilic acid (CLA) and p-chloranil (CL) as pi-acceptors to give highly colored complex species. The colored products are quantitated spectrophotometrically at 460, 841, 530 and 545 nm for DDQ, TCNQ, CLA and CL, respectively. Optimization of the different experimental conditions is described. Beer's law is obeyed in the concentration ranges 5-60, 1.5-18, 30-360 and 20-240 microg ml(-1) of gatifloxacin, but for more accurate analysis, Ringbom optimum concentration range was found to be 7.5-55, 3-16, 35-350 and 25-230 microg ml(-1) of gatifloxacin for DDQ, TCNQ, CLA and CL, respectively. The limits of detection and quantification were calculated and the relative standard deviations for different concentrations of gatifloxacin using various acceptors were <1.28%. The association constants of 1 : 1 complexes and standard free energy changes using Benesi-Hildebrand plots were studied. The proposed methods were successfully applied to the determination of gatifloxacin in pharmaceutical dosage forms without interference from common additives encountered.     

Spectrophotometric study of the reaction mechanism between DDQ as pi-acceptor and potassium iodate and flucloxacillin and dicloxacillin drugs and their determination in pure and in dosage forms

Two simple and accurate spectrophotometric methods are presented for the determination of beta-lactam drugs, flucloxacillin (Fluclox) and dicloxacillin (Diclox), in pure and in different pharmaceutical preparations. The charge transfer (CT) reactions between Fluclox and Diclox as electron donors and 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) pi-acceptor and potassium iodate via oxidation reduction reaction where the highly coloured complex species or the liberated iodine have been spectrophotometrically studied. The optimum experimental conditions have been studied carefully. Beer's law is obeyed over the concentration range of 2-450 microg ml(-1) for Fluclox and 10-450 microg ml(-1) for Diclox using DDQ reagent and at 50-550 microg ml(-1) for Fluclox and 50-560 microg ml(-1) for Diclox using iodate method, respectively. For more accurate results, Ringbom optimum concentration range is calculated and found to be 6-450 and 15-450 microg ml(-1) for Fluclox and Diclox using DDQ, respectively, and 65-550 and 63-560 microg ml(-1) for Fluclox and Diclox using iodine, respectively. The Sandell sensitivity is found to be 0.018 and 0.011 microg cm(-2) for DDQ method and 0.013 and 0.011 microg cm(-2) for iodate method for Fluclox and Diclox, respectively, which indicates the high sensitivity of both methods. Standard deviation (S.D.=0.01-0.80 and 0.07-0.98) and relative standard deviation (R.S.D.=0.13-0.44 and 0.11-0.82%) (n=5) for DDQ and iodate methods, respectively, refer to the high accuracy and precision of the proposed methods. These results are also confirmed by between-day precision of percent recovery of 99.87-100.2 and 99.90-100% for Fluclox and Diclox by DDQ method and 99.88-100.1 and 99.30-100.2% for Fluclox and Diclox by iodate method, respectively. These data are comparable to those obtained by British and American pharmacopoeias assay for the determination of Fluclox and Diclox in raw materials and in pharmaceutical preparations.     

Spectrophotometric study of the reaction mechanism between DDQ Pi- and iodine sigma-acceptors and chloroquine and pyrimethamine drugs and their determination in pure and in dosage forms

Two simple and accurate spectrophotometric methods are presented for the determination of anti-malarial drugs, chloroquine phosphate (CQP) and pyrimethamine (PYM), in pure and in different pharmaceutical preparations. The charge transphere (CT) reactions between CQP and PYM as electron donors and 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) pi-acceptor and iodine sigma-acceptor reagents to give highly coloured complex species have been spectrophotometrically studied. The optimum experimental conditions have been studied carefully. Beer' law is obeyed over the concentration range of 1.0-15 microg ml(-1) for CQP and 1.0-40 microg ml(-1) for PYM using I(2) and at 5.0-53 microg ml(-1) for CQP and 1.0-46 microg ml(-1) for PYM using DDQ reagents, respectively. For more accurate results, Ringbom optimum concentration range is calculated and found to be 10-53 and 8-46 microg ml(-1) for CQP and PYM using DDQ, respectively and 5-15 and 8-40 microg ml(-1) for CQP and PYM using iodine, respectively. The Sandell sensitivity is found to be 0.038 and 0.046 g cm(-2) for DDQ method and 0.0078 and 0.056 g cm(-2) for I(2) method for CQP and PYM, respectively which indicates the high sensitivity of both methods. Standard deviation (S.D.=0.012-0.014 and 0.013-0.015) and relative standard deviation (R.S.D.=0.09-1.4 and 1.3-1.5%) (n=5) for DDQ and I(2) methods respectively, refer to the high accuracy and precision of the proposed methods. These results are also confirmed by between day precision of percent recovery of 99-100.6%, and 98-101% for CQP and PYM by DDQ method and 99-102% and 99.2-101.4% for CQP and PYM by I(2) method respectively. These data are comparable to those obtained by British and American pharmacopoeias assay for the determination of CQP and PYM in raw materials and in pharmaceutical preparations.     

Use of charge-transfer complexation in the spectrophotometric analysis of certain cephalosporins

Three simple, rapid and sensitive spectrophotometric procedures were developed for the analysis of cephapirin sodium (1), cefazoline sodium (2), cephalexin monohydrate (3), cefadroxil monohydrate (4), cefotaxime sodium (5), cefoperazone sodium (6) and ceftazidime pentahydrate (7) in pure form as well as in their pharmaceutical formulations. The methods are based on the reaction of these drugs as n-electron donors with the σ-acceptor iodine, and the π-acceptors: 2,3-dichloro-5,6-dicyano-p-benzo-quinone (DDQ) and 7,7,8,8-tetracyanoquinodimethane (TCNQ). Depending on the solvent polarity, different coloured charge-transfer complexes and radicals were developed. Different variables and parameters affecting the reactions were studied and optimized. The obtained charge-transfer complexes were measured at 364 nm for iodine (in 1,2-dichloroethane), 460 nm for DDQ (in methanol) and 843 nm for TCNQ (in acetonitrile). Ultraviolet–visible, infrared and ¹H-nuclear magnetic resonance techniques were used to study the formed complexes. Due to the rapid development of colours at ambient temperature, the obtained results were used on thin-layer chromatograms for the detection of the investigated drugs. Beer's plots were obeyed in a general concentration range of 6–50, 40–300 and 4–24 μg ml⁻¹ with iodine, DDQ and TCNQ, respectively, with correlation coefficients not less than 0.9989. The proposed procedures could be applied successfully to the determination of the investigated drugs in vials, capsules, tablets and suspensions with good recovery; percent ranged from 96.47 (±1.14) to 98.72 (±1.02) in the iodine method, 96.35 (±1.62) to 98.51 (±1.30) in the DDQ method, and 95.98 (±0.78) to 98.40 (±0.87) in the TCNQ method. The association constants and standard free energy changes using Benesi–Hildebrand plots were studied. The binding of cephalosporins to proteins in relation to their molar absorptivities was studied.     

Spectrophotometric determination of terfenadine in pharmaceutical preparations by charge-transfer reactions

A simple, rapid and accurate method for the spectrophotometric determination of terfenadine has been developed. The proposed method based on the charge-transfer reactions of terfenadine, as n-electron donor, with 7,7,8,8-tetracyanoquinodimethane (TCNQ), tetracyanoethylene (TCNE), 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) or 2,5-dichloro-3,6-dihydroxy-1,4-benzoquinone (chloranilic acid, p-CLA) as π-acceptors to give highly colored complexes. The experimental conditions such as reagent concentration, reaction solvent and time have been carefully optimized to achieve the highest sensitivity. Beer's law is obeyed over the concentration ranges of 3–72, 3–96, 12–168 and 24–240 μg mL⁻¹ terfenadine using TCNQ, TCNE, DDQ and p-CLA, respectively, with correlation coefficients 0.9999, 0.9974, 0.9997 and 0.9979 and detection limits 0.3, 0.4, 2.6 and 12.3 μg mL⁻¹, for the reagents in the same order. DDQ and p-CLA react spontaneously with terfenadine to give colored complexes that can be applied for the flow injection analysis of terfenadine in the concentration ranges 2.4–120 and 24–240 μg with correlation coefficients 0.9990 and 0.9985 and detection limits 0.8 and 2.7 μg for DDQ and p-CLA, respectively, in addition to the high sampling through output of 40 sample h⁻¹.     

Spectroscopic investigation of the charge-transfer interactions between 1,4,7-trimethyl-1,4,7-triazacyclononane and the acceptors iodine, TCNE, TCNQ and chloranil

The interaction of the interesting polynitrogen cyclic base 1,4,7-trimethyl-1,4,7-triazacyclononane (TMTACN) with the sigma-acceptor iodine and pi-acceptors tetracyanoethylene (TCNE), 7,7,8,8-tetracyanoquinodimethane (TCNQ) and tetrachloro-p-benzoquinone (chloranil) have been studied spectrophotometrically and cyclic voltametrically in chloroform at 20 degrees C. Based on the obtained data, the formed charge-transfer complexes were formulated as [(TMTACN)I](+).I(3)(-), [(TMTACN)(TCNE)(5)], [(TMTACN)(TCNQ)(3)] and [(TMTACN)(chloranil)(3)] where the stoichiometry of the reactions, donor:acceptor molar ratios, were shown to equal 1:2 for iodine complex, 1:3 for chloranil and TCNQ complexes and 1:5 for TCNE complex.     

Synthesis,spectroscopic and thermal structural investigations of the charge-transfer complexes formed in the reaction of 1-methylpiperidine with σ- and π-acceptors

The reactions of the electron donor 1-methylpiperidine (1MP) with the π-acceptors 7,7,8,8-tetracyanoquinodimethane (TCNQ), tetracyanoethylene (TCNE), 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ), 2,3,5,6-tetrachloro-1,4-benzoquinone (chloranil = CHL) and iodine (I₂) were studied spectrophotometrically in chloroform at room temperature. The electronic and infrared spectra of the formed molecular charge-transfer (CT) complexes were recorded. The obtained results showed that the stoichiometries of the reactions are not fixed and depend on the nature of the acceptor. Based on the obtained data, the formed charge-transfer complexes were formulated as [(1MP)(TCNE)₂], [(1MP)(DDQ)]·H₂O, [(1MP)(CHL)] and [(1MP)I]I₃, while in the case of 1MP–TCNQ reaction, a short-lived CT complex is formed followed by rapid N-substitution by TCNQ forming the final reaction products 7,7,8-tricyano-8-piperidinylquinodimethane (TCPQDM). The five solids products were isolated and have been characterized by electronic spectra, infrared spectra, elemental analysis and thermal analysis.     

Synthesis and spectroscopic studies on charge-transfer molecular complexes formed in the reaction of imidazole and 1-benzylimidazole with σ- and π-acceptors

The spectrophotometric characteristics of the solid charge-transfer molecular complexes (CT) formed in the reaction of the electron donors imidazole (IML) and 1-benzylimidazole (BIML) with the σ-acceptor iodine and π-acceptors 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ), tetracyanoethylene (TCNE) and 2,3,5,6-tetrachloro-1,4-benzoquinone (CHL) have been studied in chloroform at 25 °C. These were investigated through electronic and infrared spectra as well as elemental analysis. The results show that the formed solid CT-complexes have the formulas [(IML)2 I]I3, [(IML)(DDQ)], [(IML)2(TCNE)5] and [(IML)(CHL)] for imidazole and [(BIML) I]I3, [(BIML)(DDQ)2], [(BIML)(TCNE)2] and [(BIML)(CHL)2] for 1-benzylimidazole in full agreement with the known reaction stoichiometries in solution as well as the elemental measurements. The formation constant KCT, molar extinction coefficient ?CT, free energy change ΔG0, CT energy ECT and ionization potential Ip have been calculated for the CT-complexes [(IML)2 I]I3, [(IML)(DDQ)], [(IML)(CHL)], [(BIML) I]I3, [(BIML)(DDQ)2], [(BIML)(TCNE)2] and [(BIML)(CHL)2].     

Iron pentacarbonyl as a precursor for molecule-based magnets: formation of Fe[TCNE](2) (T(c) = 100 K) and Fe[TCNQ](2) (T(c) = 35 K) magnets

The reaction of tetracyanoethylene (TCNE) and 7,7,8,8-tetracyano-p-quinodimethane (TCNQ) with Fe(CO)(5) leads to formation of magnetically ordered materials of Fe[TCNE](2) (T(c) = 100 K) and Fe[TCNQ](2) (T(c) = 35 K) composition, respectively. In contrast, the reaction with 1,2-dichloro-5,6-dicyanobenzoquinone (DDQ) leads to a paramagnetic material.     

Spectrophotometric study of the charge transfer complexes of some pharmaceutical butyrophenones

The molecular interactions between haloperidol and droperidol as electron donors and each of iodine; 7,7,8,8-tetracyanoquinodimethane (TCNQ); 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ); tetracyanoethylene (TCNE); 2,4,7-trinitro-9-fluorenon (TNF); and 2-3-5-6-tetrabromo-1,4-benzoquinone (Bromanil) as acceptors have been investigated spectrophotometrically. Different variables affecting the reaction were studies and optimized. Beer's law was obeyed in a concentration limit of 2.5-2500 mug ml(-1) for the studied drugs with various acceptors used. Electron affinities (E(A)) of the acceptors were found to correlate with both the time required for maximum colour formation and the molar absorptivities of haloperidol and droperidol. A Job's plot of the absorbance versus the molar ratio of the drugs to iodine indicated 1:1 ratio. The proposed methods were found to be rapid and sensitive and may be applied for estimation of named drugs in pharmaceutical dosage forms without interferences from the common additives encountered. Percentage recoveries ranged from 99.1-102.2%.     

Semiconducting polymers based on charge-transfer complexes. IV. Electrical properties and structure of polymeric charge-transfer complexes

Model electron donor molecules, 10-methylphenothiazine and 4-(methylthio)anisole, and polymeric electron donors which contained these molecules on the side chains of N-acyl-substituted polyethylenimines, were complexed with the electron acceptors, dichlorodicyanoquinone (DDQ), tetracyanoquinodimethane (TCNQ), tetracyanoethylene (TCNE), and tetranitrofluorenone (TNF). The model donors formed 1:1 complexes with all the acceptors except TCNE. The polymeric donors formed amorphous complexes with DDQ, TCNQ, and TCNE. Crystalline complexes were formed with TNF which had low melting points (lower than the model complexes and the pure polymer). This is apparently due to poor lateral packing of the polymer chains. Electrical resistivities were lower for all the polymer complexes than for the corresponding model complexes. Electrical resistivity also decreased with increase in complex crystallinity. In the best case the polymer complex was two hundred times as conducting as the model. The concentration of unpaired electrons measured by EPR was nearly independent of temperature. Most of the electrons seen are trapped and do not participate in conduction. Thermal activation energies for conduction were in the range of 0.5–1.8 eV and were nearly equal for the model and corresponding polymeric complexes. Elongation of polymer complex with TCNQ by rolling produces a decrease in resistivity in the roll direction, although the complex is amorphous. This reinforces the hypothesis that conduction is parallel to the polymer backbone. A polymer–tetranitrofluorenone complex was photoconducting, though the photoconductivity was smaller than the dark conductivity at the level of illumination used. Dember and Seebeck effects indicated that the major carrier in the complex was holes.     

Spectrophotometric determination of some antihistaminic drugs using 7,7,8,8-tetracyanoquinodimethane (TCNQ)

A simple and sensitive spectrophotometric method is suggested for analysis of 3 antihistaminic drugs, acrivastine (I), mequitazine (II), and dimethindene maleate (III). The method is based on reaction of the drugs with 7,7,8,8-tetracyanoquinodimethane (TCNQ) in acetonitrile to form highly stable colored products that are measured at 750, 766, and 844 nm for I and II, and 480 and 618 nm for III. Beer's law is obeyed in the ranges of 5-60 microg/mL for 1, 5-50 microg/mL for II, and 10-70 microg/mL for III. The optimum assay conditions and their applicability to the determination of the cited drugs in pharmaceutical formulations are described. The method is statistically analyzed as compared with the European Pharmacopoeia (2001) method for the analysis of dimethindene maleate and reference methods for acrivastine and mequitazine drugs revealing good accuracy and precision.     

Spectrophotometric determination of olanzapine by its oxidation with N-bromosuccinimide and cerium(IV)sulfate.

Three simple spectrophotometric methods have been described for the assay of olanzapine in its pure and pharmaceutical formulations. The direct method (A) is based on the drug oxidation with excess of N-bromosuccinimide in acidic medium and the two indirect methods (B and C) are based on the oxidation of the drug with excess of N-bromosuccinimide and cerium(IV)sulfate, followed by the reaction of the unconsumed oxidants with celestine blue. The calibration graphs were linear over the range 10 - 120 microg mL(-1) (method A), 0.5 - 6.0 microg mL(-1) (method B) and 0.6 - 3.0 microg mL(-1) (method C). After validation, the proposed methods were successfully applied to assay of olanzapine in its commercial tablets with mean percentage recoveries of 101.23 +/- 0.10, 96 +/- 0.10 and 94 +/- 0.04%. The mechanism of olanzapine oxidation with N-bromosuccinimide was also proposed.     

Utility of certain pi-acceptors for the spectrophotometric determination of some penicillins

Two simple and sensitive spectrophotometric methods are described for the determination of six penicillin derivatives. The methods are based on the reaction of these drugs as n-electron donors with either 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) or 7,7,8,8-tetracyanoquinodimethane (TCNQ) as pi-acceptors, to give a highly coloured radical anion. The coloured products are quantified spectrophotometrically at 460 and 842 nm for DDQ and TCNQ, respectively. The optimization of the different experimental conditions is described. The interference from streptomycin sulphate and common degradation products was also studied. The proposed methods were applied successfully to the determination of the different penicillins investigated, either in pure or dosage forms, with good accuracy and precision. The results were compared with those given by the official United States Pharmacopeial XXI method.     

Spectrophotometric and electrical studies of charge-transfer complexes of sodium flucloxacillin with pi-acceptors

The present study is interested to develop a simple, rapid and accurate spectrophotometric method for determination of sodium flucloxacillin (fluc) in pure form and pharmaceutical formulations. The charge-transfer (CT) interactions between sodium flucloxacillin as electron donor and chloranilic acid (CLA), dichloroquinone 4-chloroimide (DCQ), 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) and 7,7,8,8 tetracyano-p-quinodimethane (TCNQ), as pi-electron acceptors have been investigated spectrophotometrically. Different variables affecting the reaction were studied and optimized. Under the optimum conditions, linear relationships with good correlation coefficients (0.9979-0.9995) were found between the absorbance and the concentration of the drug in the range 16-880 microg ml(-1). The proposed methods were applied successfully to the determination of the examined drug either in pure or pharmaceutical dosage forms with good accuracy and precision. The formation of the CT-complexes and the sites of interaction were confirmed by elemental analysis CHN, UV-vis, IR, (1)H NMR and mass spectra techniques. Based on Job's method of continuous variation plots, the obtained results indicate the formation of 1:1 charge-transfer complexes with the general formula [(fluc)(acceptor)]. Statistical analysis of the obtained results showed no significant difference between the proposed method and official method.     

Development and Validation of Selective Spectrophotometric Methods for the Determination of Pregabalin in Pharmaceutical Preparation

Three simple, quick and sensitive methods are described for the spectrophotometric determination of pregabalin (Pgb) in pharmaceutical preparations. Among them, the first two methods are based on the reaction of Pgb as n-electron donors with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) and 7,7,8,8-tetracyanoquinodimethane (TCNQ) as π-acceptors to give highly colored complex species. The colored products were quantitated spectrophotometrically at 494 and 841 nm for DDQ and TCNQ, respectively. Optimization of the different experimental conditions was conducted. Beer’s law was obeyed in the concentration ranges 2.0—30.0 and 1.5—10 µg•mL－1 for DDQ and TCNQ methods, respectively. The third method is based on the interaction of ninhydrin (NN) with primary amine present in the pregabaline. This reaction produces a blue coloured product in N,N-dimethylformamide (DMF) medium, which absorbs maximally at 573 nm. Beer’s law was found in the concentration range 40.0—180.0 μg•mL－1. The methods were applied successfully to the determination of this drug in pharmaceutical dosage forms.