Photophysics and dynamics of a β-carboline analogue in room temperature ionic liquids

Room temperature ionic liquids are rapidly emerging as a new class of media that are ideally suited for various applications including carrying out chemical reactions. In the present article, we report the photophysics of a β-carboline analogue, namely, 3-acetyl-4-oxo-6,7-dihydro-12H indolo-[2,3-a] quinolizine (AODIQ), in three room temperature ionic liquids (RTILs), 1-butyl-3-methylimidazolium methyl sulfate ([BMIM][MeSO(4)]), 1-butyl-3-methylimidazolium octyl sulfate ([BMIM][C(8)SO(4)]) and 1-ethyl-3-methylimidazolium methyl sulfate ([EMIM][MeSO(4)]). Out of these, [BMIM][C(8)SO(4)] is a typical RTIL that forms micellar aggregates above a critical micellar concentration (CMC). Steady state absorption, steady state and time resolved fluorescence techniques are used to probe the properties of these systems. The investigation reveals that the photophysics of AODIQ is modified significantly in the micelle-forming RTIL as compared to that in the other two. A comparative study with the fluorophore in [BMIM][C(8)SO(4)] and a conventional anionic surfactant of a similar hydrophobic chain length from the sodium-n-alkyl sulfate series, viz., sodium octyl sulfate (S(8)S), reveals that the fluorophore experiences a more constrained environment in the RTIL micelle as compared to the conventional anionic micelle.     

Molecular Dynamic Study of the Behavior of Confined [BMIM][PF6] Ionic Liquids: Pore Size Dependence

Russian Journal of Physical Chemistry A - This work aimed to investigate the structural and dynamical properties of ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6])...     

Protein structure and dynamics in ionic liquids. Insights from molecular dynamics simulation studies

We present in this work the first molecular simulation study of an enzyme, the serine protease cutinase from Fusarium solani pisi, in two ionic liquids (ILs): 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]) and 1-butyl-3-methylimidazolium nitrate ([BMIM][NO(3)]). We tested different water contents in these ILs at room temperature (298 K) and high temperature (343 K), and we observe that the enzyme structure is highly dependent on the amount of water present in the IL media. We show that the enzyme is preferentially stabilized in [BMIM][PF6] at 5-10% (w/w) (weight of water over protein) water content at room temperature. [BMIM][PF6] renders a more nativelike enzyme structure at the same water content of 5-10% (w/w) as previously found for hexane, and the system displays a similar bell-shape-like dependence with the water content in the IL media. [BMIM][PF6] is shown to increase significantly the protein thermostability at high temperatures, especially at low hydration. Our analysis indicates that the enzyme is less stabilized in [BMIM][NO(3)] relative to [BMIM][PF6] at both temperatures, most likely due to the strong affinity of the [NO(3)]- anion toward the protein main chain. These findings are in accordance with the experimental knowledge for these two ionic liquids. We also show that these ILs "strip off" most of the water from the enzyme surface in a degree similar to that found for polar organic solvents such as acetonitrile, and that the remaining waters at the enzyme surface are organized in many small clusters.     

Isobaric vapor–liquid equilibria for ethanol–water system containing different ionic liquids at atmospheric pressure

Isobaric vapor–liquid equilibrium (VLE) data for ethanol–water systems containing ionic liquids (ILs) 1-methyl-3-methylimidazolium dimethylphosphate ([MMIM][DMP]), 1-ethyl-3-methylimidazolium diethylphosphate ([EMIM][DEP]), 1-butyl-3-methylimidazolium bromide ([BMIM][Br]), 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]) and 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF₆]) at atmospheric pressure (101.32 kPa) were measured with a circulation still. The results showed that the VLE of ethanol–water systems in the presence of different ILs was obviously different from that of the IL-free system. All ILs studied showed a salting-out effect, which gave rise to a change of the relative volatility of ethanol, and even to an elimination of the azeotropic point. It was found that the salting-out effect followed the order of [BMIM][Cl] > [BMIM][Br] > [BMIM][PF₆] and [MMIM][DMP] > [EMIM][DEP], which was ascribed to the preferential solvation ability of the ions resulting from the dissociation of the IL.     

A Bloembergen–Purcell–Pound <Superscript>13</Superscript>C NMR relaxation study of the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate

The molecular structure and rotational motion of the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]) were studied over a wide temperature range using the Bloembergen–Purcell–Pound ¹³C NMR spin–lattice relaxation method and NOE factors. Examination of the spin–lattice relaxation times (T ₁) and the rates (R ₁=1/T ₁) of the 1-butyl-3-methylimidazolium cation reveals the relative motions of each carbon in the imidazolium cation. The rotational characteristics of the [BMIM] cation are supported by ab-initio molecular structures of [BMIM][PF6] using density functional theory (DFT) and Hartree–Fock (HF) methods. The ab-initio gas phase structures of [BMIM][PF6] indicate that the 1-butyl-3-methylimidazolium C2 hydrogen, the ring methyl group, and the butyl side-chain hydrogen atoms form hydrogen bonds with the hexafluorophosphate anion.     

Particle self-assembly in oil-in-ionic liquid Pickering emulsions

We have studied polydimethylsiloxane (PDMS)-in-1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF(6)]) Pickering emulsions stabilized by polystyrene microparticles with different surface chemistry. Surprisingly, in contrast to the consensus originating from oil/water Pickering emulsions in which the solid particles equilibrate at the oil-water droplet interfaces and provide effective stabilization, here the polystyrene microparticles treated with sulfate, aldehyde sulfate, or carboxylate dissociable groups mostly formed monolayer bridges among the oil droplets rather than residing at the oil-ionic liquid interfaces. The bridge formation inhibited individual droplet-droplet coalescence; however, due to low density and large volume (thus the buoyant effect), the aggregated oil droplets actually promoted oil/ionic liquid phase separation and distressed emulsion stability. Systems with binary heterogeneous polystyrene microparticles exhibited similar, even enhanced (in terms of surface chemistry dependence), bridging phenomenon in the PDMS-in-[BMIM][PF(6)] Pickering emulsions.     

Headspace Single Drop Microextraction Using Micellar Ionic Liquid Extraction Solvents

A headspace single drop microextraction (SDME) method using extraction solvents comprised of micellar ionic liquids (ILs) was used to perform the extraction of 17 aromatic compounds from aqueous solution and coupled with liquid chromatography. The effects of various experimental parameters including type of micellar IL extraction solvent, stir rate, extraction time, volume of the microdroplet, and addition of organic solvent were investigated and optimized. Two different micellar solutions were formed by dissolving 1-decyl-3-methylimidazolium bromide ([DMIM][Br]) and sodium dodecyl sulfate (SDS) in 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]). It was observed that the enrichment factors of the 17 studied compounds were all enhanced with the micellar ionic liquid extraction solvent compared to the neat [BMIM][Cl] IL. The highest sensitivity was obtained with the [BMIM][Cl]–[DMIM][Br] micellar solution for polycyclic aromatic hydrocarbons (PAHs) with high molecular weight and fused rings while the [BMIM][Cl]–SDS micellar solution was proven to be more sensitive for smaller, more polar molecules. The detection limits were lower when utilizing the [BMIM][Cl]–SDS and [BMIM][Cl]–[DMIM][Br] extraction solvents compared to the neat [BMIM][Cl] extraction solvent. The reproducibility of the extraction method at 20 °C using extraction solvents composed of [BMIM][Cl]–SDS and [BMIM][Cl]–[DMIM][Br] ranged from 6.7 to 14.0 and 4.2 to 14.7%, respectively.     

The micellar shuttle: thermoreversible, intact transfer of block copolymer micelles between an ionic liquid and water

Poly(1,2-butadiene-block-ethylene oxide) (PB-PEO) block copolymer micelles are found to partition reversibly between an ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]) and water, thereby functioning as micellar shuttles controlled simply by temperature. The micelle size and structure are preserved during this reversible phase transfer. This phenomenon offers a simple means to transport chemicals back and forth between two immiscible phases.     

Study of Imidazolium Ionic Liquids:Temperature-dependent Fluorescence and Molecular Dynamics Simulation

The steady-state fluorescence spectra and molecular dynamics simulations were explored to investigate the temperature dependent organization in some imidazolium ionic liquids:1-butyl-3-methylimidazolium hexafluo-rophosphate([bmim][PF6]),1-ethyl-3-methylimidazolium ethylsulfate([emim][EtSO4]) and 1-butyl-3-methylimida-zolium tetrafluoroborate([bmim][BF4]).The pure room temperature ionic liquids(ILs) exhibit a large red shift at more than an excitation wavelength of around 340 nm,which demonstrates the hetero...     

Oleic acid as the capping agent in the synthesis of noble metal nanoparticles in imidazolium-based ionic liquids

This paper reports the synthesis and automatic separation of solvent dispersible silver and platinum nanoparticles in 1-butyl-3-methylimidazolium bis(triflylmethyl-sulfonyl) imide ([BMIM][Tf2N]) ionic liquid (IL) using oleic acid as the major capping agent.     

Direct electrochemistry of cytochrome c entrapped in agarose hydrogel in room temperature ionic liquids

Direct electrochemistry of cytochrome c (cyt-c) entrapped in agarose hydrogel on gold electrode (Au), edge plane pyrolytic graphite electrode (EPPGE) and glassy carbon electrode (GC) in two room temperature ionic liquids was investigated. The effects of the addition of N,N-dimethylformamide (DMF) in the agarose-cyt-c film, water concentration in ionic liquids and exterior metal ions on the electrochemical behavior of cyt-c were monitored, and electrocatalytic properties of cyt-c were also done. Results showed that a good quasi-reversible redox behavior of cyt-c could be found after adding DMF in agarose-cyt-c film, and peak shape would not change after continuously scanning for 50 cycles. In addition, a certain amount of water in hydrophilic ionic liquids is necessary to maintain electrochemical activities of cyt-c, electrochemical performance of cyt-c is the best when the water content is 5.2% and 5.8% for 1-butyl-3-methylimidazolium bromide ([Bmim][Br]) and 1-butyl-3-methylimidazolium tetrafluoroborate([Bmim][BF(4)]) respectively. However, electrochemical activities of cyt-c are inhibited by exterior metal ions. Interestingly, cyt-c entrapped in agarose hydrogel on EPPGE and GC could catalyze the electroreduction of trichloroacetic acid (TCA) and tert-butyl hydroperoxide (t-BuOOH) in [Bmim][BF(4)], but could not in [Bmim][Br]. Reasons for above-mentioned differences of electrochemical properties of cyt-c in different ionic liquids were preliminarily discussed.     

Molecular dynamics simulations of charged nanoparticle self-assembly at ionic liquid-water and ionic liquid-oil interfaces

Nanoparticle self-assembly at liquid-liquid interfaces can be significantly affected by the individual nanoparticle charges. This is particularly true at ionic liquid (IL) based interfaces, where Coulombic forces play a major role. Employing 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF(6)]) as a model IL, we have studied the self-assembly of hydrophobic nanoparticles with different surface charges at the IL/water and IL/oil (hexane) interfaces using molecular dynamics simulations. In the IL/water system, the nanoparticles were initially dispersed in the water phase but quickly equilibrated at the interface, somewhat in favor of the IL phase. This preference was lessened with increased nanoparticle charge. In the IL/hexane system, all charged nanoparticles interacted with the IL to some extent, whereas the uncharged nanoparticles remained primarily in the hexane phase. Potential of mean force calculations supported the observations from the equilibrium studies and provided new insights into the interactions of the nanoparticles and ionic liquid based interfaces.     

The thermochemistry of solvation of imidazolium-based ionic liquids in benzene

ABSTRACT

The present work is devoted to the thermochemical study of solvation of ionic liquids (IL) in benzene. The solution enthalpies of 1-ethyl-3-methylimidazolium tricyanomethanide [EMIM][C(CN)₃], 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF₄], 1-hexyl-3-methylimidazolium hexafluorophosphate [HMIM][PF₆], 1-octyl-3-methylimidazolium tetrafluoroborate [OMIM][BF₄], 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [EMIM][NTf₂], 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][NTf₂] and 1-butyl-3-methylimidazolium trifluoromethanesulfonate [BMIM][TfO] in benzene were measured. The solvation enthalpies of imidazolium-based IL were calculated. Molar refractions of imidazolium-based IL form literature data on density and refractive indexes of IL were also calculated. The linear correlation between solvation enthalpy and molar refraction of IL was observed. This correlation can be used to calculate the vaporization enthalpy of imidazolium-based IL from solution calorimetry data.     

Effect of anionic structure on the phase formation and hydrophobicity of amino acid ionic liquids aqueous two-phase systems

Compared with the conventional ionic liquids, amino acid ionic liquids are more biodegradable and biocompatible, and can enhance stability of biomaterials. In this work, amino acid ionic liquids 1-butyl-3-methylimidazolium L-serine ([C(4)mim][Ser]), 1-butyl-3-methylimidazolium glycine ([C(4)mim][Gly]), 1-butyl-3-methylimidazolium L-alanine ([C(4)mim][Ala]) and 1-butyl-3-methylimidazolium L-leucine ([C(4)mim][Leu]) have been synthesized. These ionic liquids are found to form aqueous two-phase systems (ATPSs) by the salted-out of K(3)PO(4) in aqueous solutions. Phase diagram of the ATPSs and the Gibbs energies of transfer of methylene group from the bottom salt-rich phase to the top ionic liquid-rich phase have been determined at 298.15K and pH 14, and the effect of anionic structure of the ionic liquids on phase formation of the ATPSs and the relative hydrophobicity between the top and the bottom phases are then examined. In order to understand the effect of relative hydrophobicity of the phases in equilibrium in the ATPSs on the extraction/separation capability of biomolecules, the partition coefficients of cytochrome-c (as a model biomolecule) in the ATPSs are measured by spectrophotometry. It is suggested that hydrophobic interactions are mainly responsible for the higher partition coefficients of cytochrome-c in aqueous two-phase systems at pH 14, and the extraction and separation capacity of biomolecules can be improved by the modulation of the relative hydrophobicity of the phases and/or the pH of the system.     

Novel microemulsions: ionic liquid-in-ionic liquid

The hydrophobic IL 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF(6)]) can be dispersed in hydrophilic IL propylammonium formate (PAF) with the aid of surfactant AOT, and [bmim][PF(6)]-in-PAF microemulsions are formed.     

离子液体[BMIM]Br与[BMIM][BF4]配比浓度对Br-离子电荷转移的调节

利用X射线吸收精细结构光谱(XAFS)及紫外吸收光谱两种方法, 分析了离子液体1-丁基-3-甲基咪唑溴盐([BMIM]Br)中逐渐掺入1-丁基-3-甲基咪唑四氟硼酸盐([BMIM][BF₄])时, Br^-阴离子与咪唑阳离子之间氢键作用及电荷偏移量的改变. 随着[BMIM][BF₄]加入量增多, Br 元素XAFS近边(XANES)显示吸收峰降低, 吸收边位置向低能端位移0.9 eV; 扩展边(EXAFS)算出径向结构显示Br 与近邻原子间平均配位数降低、平均键长增长; 紫外光谱也有明显蓝移减色效应. 这些结果都表明Br₄^-的掺入改变了Br^-与阳离子间的电荷偏移量, 负电荷更多地转移到Br^-上, 量化计算的数据同样支持该结论.     

Enhanced refolding of lysozyme with imidazolium-based room temperature ionic liquids: Effect of hydrophobicity and sulfur residue

The expression of recombinant proteins in microorganism frequently leads to the formation of insoluble aggregates, inclusion bodies (IBs). Thus, the additional in vitro protein refolding process is required to convert inactive IBs into water-soluble active proteins. This study investigated the effect of sulfur residue and hydrophobicity of imidazolium-based room temperature ionic liquids (RTILs) on the refolding of lysozyme as a model protein in the batch dilution method which is the most commonly used refolding method. When lysozyme was refolded in the refolding buffer containing [BF4]-based RTILs with a systematic variety of alkyl chain on cations varying from two to eight, less hydrophobic imidazolium cations having shorter alkyl chains were effective to facilitate lysozyme refolding. Compared to the conventional refolding buffer, 2 times higher lysozyme refolding yield was obtained in 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIM][BF4]) containing refolding buffer. The refolding yield of lysozyme was even more increased by 2.5 times when 1-butyl-3-methylimidazolium methylsulfate ([BMIM][MS]) containing sulfur residue on anion was used. The sulfur residue in [BMIM][MS] is supposed to improve the refolding yield of lysozyme which has 4 intramolecular disulfide bonds. For dilution-based refolding of lysozyme, the optimum concentrations of RTILs in refolding buffer were found to be 1.0 M [EMIM][BF4] and 0.5 M [BMIM][MS], respectively. The optimum temperate for dilution-based refolding of lysozyme with RTILs was 4 °C.     

High-pressure infrared spectroscopy of ionic liquids mixed with Tween 80

In this study, the possibility of using Tween 80 to disturb the microstructures of 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM]BF₄) and 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM]PF₆) was investigated under high pressures. The imidazolioum C H absorptions of pure ionic liquids (ILs) are significantly blue-shifted under high pressures. However, mild changes in imidazolioum C H stretching frequencies were observed for IL/Tween 80 mixtures. Tween 80 may hinder cations of ILs to form network structures with anions under high pressures via pressure-enhanced cation-Tween 80 interactions. Based on the experimental results, Tween 80-[BMIM]PF₆ interactions are more effective in disturbing the local structure of imidazolium C H than Tween 80-[BMIM]BF₄ interactions.     

Nonsolvent application of ionic liquids: organo-catalysis by 1-alkyl-3-methylimidazolium cation based room-temperature ionic liquids for chemoselective N-tert-butyloxycarbonylation of amines and the influence of the C-2 hydrogen on catalytic efficiency

1-Alkyl-3-methylimidazolium cation based ionic liquids efficiently catalyze N-tert-butyloxycarbonylation of amines with excellent chemoselectivity. The catalytic role of the ionic liquid is envisaged as "electrophilic activation" of di-tert-butyl dicarbonate (Boc(2)O) through bifurcated hydrogen bond formation with the C-2 hydrogen of the 1-alkyl-3-methylimidazolium cation and has been supported by a downfield shift of the imidazolium C-2 hydrogen of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([bmim][NTf(2)]) from δ 8.39 to 8.66 in the presence of Boc(2)O in the (1)H NMR and a drastic reduction of the catalytic efficiency with 1-butyl-2,3-dimethylimidazolium ionic liquids that are devoid of the C-2 hydrogen. The differential time required for reaction with aromatic and aliphatic amines has offered means for selective N-t-Boc formation during inter and intramolecular competitions. Preferential N-t-Boc formation with secondary aliphatic amine has been achieved in the presence of primary aliphatic amine. Comparison of the catalytic efficiency for N-t-Boc formation with a common substrate revealed that [bmim][NTf(2)] is superior to the reported Lewis acid catalysts.     

Thermodynamics of complexation of cesium ions with dibenzo-18-crown-6 in hydrophobic ionic liquids

The stability constants of the [Cs(DB18C6)]⁺ complex (DB18C6 is dibenzo-18-crown-6, L) in hydrophobic ionic liquids (room-temperature ionic liquids, RTIL) trioctylmethylammonium salicylate ([TOMA][Sal]), tetrahexylammnoium dihexylsulfosuccinate ([THA][DHSS]), and 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([BMIM][N(Tf)₂], as well as of the [Cs(18C6)₂]⁺ complex in [BMIM][N(Tf)₂], were measured by 133Cs NMR in the temperature range 27–57°C. The changes in the enthalpy and entropy of complex formation were determined. A linear correlation was revealed between logK ₁ and the extraction factor logD _Cs^DB18C6 for the cesium extraction from an aqueous solution into the RTIL.