Reactions of Dienes with a Mo(0) Complex with Tetraphosphine Coligand [Mo(P4)(Ph2PCH2CH2PPh2)] (P4 = Meso‐o‐C6H4(PPhCH2CH2PPh2)2)

Reaction of tetraphosphine complex [Mo(κ⁴‐P4)(Ph₂PCH₂CH₂PPh₂)] (1; P4 = meso‐o‐C₆H₄‐(PPhCH₂CH₂PPh₂)₂) with E‐1,3‐pentadiene in toluene at 60 °C gave the η⁴‐diene complex [Mo(η⁴‐E‐1,3‐pentadiene)(κ⁴‐P4)] (2), which is present as a mixture of two isomers due to the orientation of the Me group in the diene ligand. Treatment of 1 with Z‐1,3‐pentadien also resulted in the formation of 2 as the sole product after heating the reaction mixture at 90 °C. Whereas the reaction of 1 with 1,3‐cyclohexadiene at 60 °C afforded the η⁴‐diene complex [Mo(η⁴‐cyclohexadiene)(κ⁴‐P4)] (6), that with cyclopentadiene led to the C‐H bond scission product [η⁵‐C₅H₅)MoH(κ³‐P4)] (7). Detailed structures were determined by X‐ray crystallography for 2, 6,and 7, and fluxional feature of 6 in solution was clarified based on the VT‐NMR studies.     

Synthesis and Crystal Structures of the Molybdenum(II) Complexes with the N,N‐dimethylthiocarbamoyl Containing Ligand: Crystal Structures of [Mo(CO)2(η2‐S2COEt)(η2‐SCNMe2)(PPh3)] and [Mo(CO)2(η2‐S2CNC4H8)(η2‐SCNMe2)(PPh3)]

The reaction of the thiocarbamoyl‐molybdenum complex [Mo(CO)₂(η²‐SCNMe₂)(PPh₃)₂Cl] 1 , with EtOCS2K and C4H8NCS2NH4 in dichloromethane at room temperature yielded the seven coordinated ethyldithiocarbonate thiocarbamoyl‐molybdenum complex [Mo(CO)₂(η²‐S₂COEt)(η²‐SCNMe₂)(PPh₃)] 2 , and the dithiocarbamate thiocarbamoyl‐molybdenum complex [Mo(CO)₂(η²‐S₂CNC₄H₈)(η²‐SCNMe₂)(PPh₃)] 3 . The geometry around the metal atom of compounds 2 and 3 are capped octahedrons as revealed by X‐ray diffraction analyses. The thiocarbamoyl and ethyldithiocarbonate or pyrrolidinyldithiocarbamate ligands coordinate to the molybdenum metal center through the carbon and sulfur and two sulfur atoms, respectively. Structure parameters, NMR, IR and Mass spectra are in agreement with the crystal chemistry of the two compounds.     

Transformation of organic molecules on the low-valent [M(Ph(2)PCH(2)CH(2)PPh(2))(2)] moiety derived from trans-[M(N(2))(2)(Ph(2)PCH(2)CH(2)PPh(2))(2)] or related complexes (M = Mo, W)

A zero-valent [M(Ph(2)PCH(2)CH(2)PPh(2))(2)] moiety (M = Mo, W) generated in situ by dissociation of the N(2) ligands in trans-[M(N(2))(2)(Ph(2)PCH(2)CH(2)PPh(2))(2)] can activate pi-accepting organic molecules including isocyanides and nitriles, which undergo the electrophilic attack caused by a strong pi-donation from a zero-valent metal center. Cleavage of a variety of C-X bonds (X = H, C, N, O, P, halogen) also occurs at their electron-rich sites through oxidative addition to form reactive intermediates, which subsequently degradate to yield smaller molecules either bound to or dissociated from the metal center. The mechanism is substantiated unambiguously by isolation of numerous intermediate stages.     

Crystal Structure of[Ru(taab)(DMF)_2]·[(CIO_4)_2]

ＣｒｙｓｔａｌＳｔｒｕｃｔｕｒｅｏｆ［Ｒｕ（ｔａａｂ）（ＤＭＦ）_２］·［（ＣＩＯ_４）_２］￥ＤｕａｎＣｈｕｎ－Ｙｉｎｇ；ＬｕＺｈｏｎｇ－Ｌｉｎ；ＴｉａｎＹｕ－Ｐｅｎｇ；ＹｏｕＸｉａｏ－Ｚｅｎｇ；ＣｈｅｎＹａｏ（ＣｏｏｒｄｉｎａｔｉｏｎＣｈｅｍｉｓｔ?..     

Synthesis and Characterization of Ethylenediammonium Molybdenum Thiocomplex [H3NCH2CH2NH3][Mo3S13]

An organo‐spaced molybdenum thiocomplex [ H₃NCH₂CH₂‐NH₃][Mo₃S₁₃] has been synthesized under hydrothermal condition and the structure of the compound was determined by single‐crystal X‐ray diffraction. The title compound crystallizes in the monoclinic space group C2/c with a = 1.81157 (18), b = 1.04549(9), c = 2.04892(19) nm, β= 107.184 (2)°, Z = 8 and V = 3.7074(6) nm³. The inorganic part of the compound consists of a Mo₃ triangle capped by an apical μ₃‐sulfur atom, with each Mo atom being also coordinated to one terminal disulfur ligand and two bridging disulfur ligands. The negative charges on the inorganic cluster are balanced by the diprotonated ethylenediamine cations [ H₃NCH₂CH₂‐NH₃]²⁺ located in the space between the clusters.     

Synthesis and Crystal Structures of the Molybdenum(II) Complexes with the N,N‐dimethylthiocarbamoyl Containing Ligand: Crystal Structures of β [Mo(CO)2{η2‐S2P(OEt)2}(η2‐SCNMe2)(PPh3)] and [Mo(CO)2(η3‐Tp)(η2‐SCNMe2)(PPh3)]

Reactions of the thiocarbamoyl‐molybdenum complex [Mo(CO)₂(η²‐SCNMe₂)(PPh₃)₂Cl] 1 , and ammonium diethyldithiophosphate, NH₄S₂P(OEt)₂, and potassium tris(pyrazoyl‐1‐yl)borate, KTp, in dichloromethane at room temperature yielded the seven coordinated diethyldithiophosphate thiocarbamoyl‐molybdenum complexe [Mo(CO)₂{η²‐S₂P(OEt)₂}(η²‐SCNMe₂)(PPh₃)] β‐3 , and tris(pyrazoyl‐1‐yl)borate thiocabamoyl‐molybdenum complex [Mo(CO)₂(η³‐Tp)(η²‐SCNMe₂)(PPh₃)] 4 , respectively. The geometry around the metal atom of compounds β‐3 and 4 are capped octahedrons. The α‐ and β‐isomers are defined to the dithio‐ligand and one of the carbonyl ligands in the trans position in former and two carbonyl ligands in the trans position in later. The thiocabamoyl and diethyldithiophosphate or tris(pyrazoyl‐1‐yl)borate ligands coordinate to the molybdenum metal center through the carbon and sulfur and two sulfur atoms, or three nitrogen atoms, respectively. Complexes β‐3 and 4 are characterized by X‐ray diffraction analyses.     

基于3，4-乙撑二氧基噻吩环配体的铜/锌配合物的合成、晶体结构及性质

利用3,4-乙撑二氧基噻吩-2,5-二羧酸(H_2L_1)为主配体,2,2′-联吡啶(L_2)、4,4′-联吡啶(L_3)为辅配体,分别与二水合氯化铜、氯化锌通过溶剂热反应得到配合物{[Cu_2(L_1)_2(L_2)(H_2O)_2(DMF)]·3H_2O}n (1)(DMF=N,N-二甲基甲酰胺)和配合物{[Zn(L_1)(L_3)(H_2O)2]·H_2O}n (2)。通过X射线单晶衍射法、红外光谱、元素分析、紫外光谱、荧光光谱、热重分析等测试手段对其结构进行了表征与性质研究。单晶结构分析表明:配合物1是由L_1~(2-)桥联Cu~(2+)形成的二维层状结构,并进一步通过氢键作用形成三维网络结构。配合物2是由L_1~(2-)连接Zn~(2+)形成一维链,并进一步桥联4,4′-联吡啶形成为一维带状结构,通过配位水分子与配体氧原子的氢键作用及带与带之间的π-π堆积形成三维结构。荧光分析和热重分析结果分别表明配合物1和2均有良好的荧光性能和热稳定性。配合物1和2的最大发射波长分别为364和365 nm。     

Syntheses and Crystal Structures of Two New Iron-sulfur Carbonyl Complexes: [Fe2(SC6H4Cl)2(CO)6]·0.5(Et2O) and [Fe3(SC6H4NH2)6(CO)6]·2(MeOH)

Two new iron-sulfur carbonyl complexes, [Fe2(SC6H4Cl)2(CO)6]·0.5(Et2O) 1 and [Fe3(SC6H4NH2)6(CO)6]·2(MeOH) 2, have been prepared and characterized by elemental analysis, IR spectra and single-crystal X-ray diffraction. Crystal data for 1: monoclinic, C2/c, a = 18.4439(8), b = 11.0999(5), c = 25.1830(10)(A), β = 97.0370(10)o, V = 5116.8(4)(A)3, Z = 8, C20H13Cl2Fe2O6.50S2, Mr = 604.02, Dc = 1.568 g/cm3, μ = 1.540 mm-1, F(000) = 2424, the final R = 0.0545 and wR = 0.1454 for 3443 observed reflections with I > 2σ(I); 2: monoclinic, P21/n, a = 12.350, b = 26.3050(11), c = 16.057(A),β = 97.891(3)°, V = 5166.9(2)(A)3, Z = 4, C44H44Fe3N6O8S6, Mr = 1144.76, Dc = 1.472 g/cm3, μ = 1.128 mm-1, F(000) = 2352, the final R = 0.0442 and wR = 0.1197 for 7978 observed reflections with I > 2σ(I). Complex 1 contains one iron dimer, in which two tricarbonyliron(I) fragments are bridged together by two 4-chlorophenylthiolate ligands, whereas complex 2 contains a linear tri-iron cluster, in which two terminal tricarbonyliron(II) fragments and the central Fe(II) atom are linked together by six 4-aminophenylthiolate bridging ligands.     

Syntheses and Crystal Structure of [Cu（pyr）3].Hg2I6

1INTRODUCTIONThepolynucleard10metalcomplexesarepotentialluminescentsensormaterialsduetotheirattractivephotochemicalandphotophysicalpro-perties[1,2].Lowdimensionalmetal-organichalidecomplexeshavereceivedever-interestingattentioninrecentyearsfortheirpotentialapplicationsaselectronicandcatalyticmaterials[3,4].RecentlyHomo-metaloligomersandthechainsofcopperhavebeenreportedbyZubietaandthecoworkersviahydrothermalsyntheses[5,6].Theexistingexamplesofcopperwithmercuryareextremelyrare[7].Intherece…     

Synthesis,crystal and spectroscopic characterization of [RuHCl(CO)(PPh3)2(pyrazine)]

The reaction of [RuHCl(CO)(PPh₃)₃] with pyrazine has been examined and a ruthenium(II) complex – [RuHCl(CO)(PPh₃)₂(C₄H₄N₂)] -- has been obtained. The compound has been studied by IR, UV–Vis spectroscopy, and X-ray crystallography. The molecular orbital diagram of the complex has been calculated with density functional theory (DFT). The spin-allowed singlet--singlet electronic transitions of the complex have been calculated with the time-dependent DFT method, and the UV–Vis spectrum of the compound has been discussed on this basis.     

Syntheses and Crystal Structures of Two New Iron-sulfur Carbonyl Complexes: [Fe_2(SC_6H_4Cl)_2(CO)_6]·0.5(Et_2O) and [Fe_3(SC_6H_4NH_2)_6(CO)_6]·2(MeOH)

Two new iron-sulfur carbonyl complexes, [Fe2(SC6H4Cl)2(CO)6]?0.5(Et2O) 1 and [Fe3(SC6H4NH2)6(CO)6]?2(MeOH) 2, have been prepared and characterized by elemental analysis, IR spectra and single-crystal X-ray diffraction. Crystal data for 1: monoclinic, C2/c, a = 18.4439(8), b = 11.0999(5), c = 25.1830(10) ?, β = 97.0370(10)o, V = 5116.8(4) ?3, Z = 8, C20H13Cl2Fe2O6.50S2, Mr = 604.02, Dc = 1.568 g/cm3, μ = 1.540 mm–1, F(000) = 2424, the final R = 0.0545 and wR = 0.1454 for 3443 observed reflections with I > 2σ(I); 2: monoclinic, P21/n, a = 12.350, b = 26.3050(11), c = 16.057 ?, β = 97.891(3)°, V = 5166.9(2) ?3, Z = 4, C44H44Fe3N6O8S6, Mr = 1144.76, Dc = 1.472 g/cm3, μ = 1.128 mm–1, F(000) = 2352, the final R = 0.0442 and wR = 0.1197 for 7978 observed reflections with I > 2σ(I). Complex 1 contains one iron dimer, in which two tricarbonyliron(I) fragments are bridged together by two 4-chlorophenylthiolate ligands, whereas complex 2 contains a linear tri-iron cluster, in which two terminal tricarbonyliron(II) fragments and the central Fe(II) atom are linked together by six 4-aminophenylthiolate bridging ligands.     

稀土配合物{La［o-C6H4(NO2)(CO2)］3·(DMF)2}2的晶体结构及其荧光性能

合成了一种新的双核倒反中心的稀土镧配合物{La［o-C6H4(NO2)(CO2)］3·(DMF)2}2. 通过元素分析、 核磁共振谱和红外光谱对配合物的组成和结构进行了表征,  用热重分析研究了该配合物的热稳定性,  用X射线单晶衍射法测定了其晶体结构. 镧配合物{La［o-C6H4(NO2)(CO2)］3·(DMF)2}2晶体属三斜晶系, 空间群P1,  晶胞参数a=1.902(2) nm, b=1.245 0(2) nm, c=1.298 7(2) nm, α=64.555(2)°, β=66.348(2)°, γ=71.920(2)°, V=1.569 5(5) nm3, Dc=1.658 Mg/m3, Z=2, μ=1.437 mm-1, F(000)=784. 配合物中有2个La(Ⅲ)被4个邻硝基苯甲酸的羧酸根的负氧离子桥联, 每个La(Ⅲ)的中心离子配位数为9,  配位原子分别来自于7个邻硝基苯甲酸的羧酸根的负氧离子和2个DMF的羰基氧原子. 化合物中的氢键和π…π堆积作用使其成为三维立体结构. 同时发现了标题化合物固体具有光致发光现象, 发光性能测试表明， 配合物具有很好的荧光性质.     

Preparation, Characterization and Crystal Structure of [Be(NCSe)2(HCON(CH3)2)2]

 Di-N-selenocyanato-bis(N,N′-dimethylfor- mamide)beryllium (1) was prepared and characterized by chemical analyses, and single crystal X-ray structure analysis. Crystals of 1 are monoclinic with a = 1837.2 (8) pm, b = 547.1 (2) pm, c = 1435.6 (6) pm, β = 93.27 (4)°, space group C2/c, Z = 4. Beryllium is tetrahedrally coordinated by two N-bonded selenocyanate and two O-bonded N,N′-dimethylformamide ligands and intermolecular Se ⋯ Se as well as Se ⋯ H interactions are observed.     

The Ylide Adduct SOC2(PPh3)2 as Complex Ligand. Reaction with [Mn2(CO)10] and InCl3; Crystal Structures of [(CO)4Mn(SOC2{PPh3}2)2][Mn(CO)5] and (H2C{PPh3}2)[InCl4]2

The betain‐like SOC₂(PPh₃)₂ ( 1a ) reacts with [Mn₂(CO)₁₀] in THF to produce the salt‐like complex [(CO)₄Mn(SOC₂{PPh₃}₂)₂][Mn(CO)₅] ( 2 ). 1a is bonded via the sulfur atoms which are arranged in trans position in the octahedral environment of the manganese atom. With InCl₃ from CH₂Cl₂ solution the addition product [Cl₃In(SOC₂{PPh₃}₂)] ( 3 ) is obtained along with the salt (H₂C{PPh₃}₂)[InCl₄]₂ ( 4 ), which is the result of proton abstraction from the solvent. The crystal structures of 2· 0.5THF and 4· CH₂Cl₂ are reported. The compounds are further characterized by IR and ³¹P NMR spectroscopy.     

Synthesis and Characterization of the First Doubly‐bridged N,N‐dimethylthiocarbamoyl Metal Complex: Crystal Structure of [Mo(Cl)(CO)2(PPh3)]2(η1:η2:μ‐SCNMe2)2

The first doubly‐bridged thiocarbamoyl metal complex [Mo(Cl)(CO)₂(PPh₃)]₂(η¹:η²:μ‐SCNMe₂)₂ ( 2 ) was formed from stirring [Mo(CO)₂(η²‐SCNMe₂)(PPh₃)₂Cl] ( 1 ) in dichloromethane at room temperature. Complex 2 is a dimer with each thiocarbamoyl unit coordinating through sulfur and carbon to one metal center and bridging both metals through sulfur. Complex 2 is characterized by X‐ray diffraction analysis.     

Neue Phosphor-verbrückte Übergangsmetall-Komplexe Die Kristallstrukturen von [Co4(CO)10(PiPr)2], [Fe3(CO)9(PtBu)(PPh)], [Cp3Fe3(CO)2(PPtBu)(PtBu)], [(NiPPh3)2(PiPr)6], [(NiPPh3)Ni{(PtBu)3}2] und [Ni8(PtBu)6(PPh3)2]

New Phosphorus-bridged Transition Metal Complexes The Crystal Structures of [Co₄(CO)₁₀(PⁱPr)₂], [Fe₃(CO)₉(P^tBu)(PPh)], [Cp₃Fe₃(CO)₂(PP^tBu)· (P^tBu)], [(NiPPh₃)₂(PⁱPr)₆], [(NiPPh₃)Ni{(P^tBu)₃}₂], and [Ni₈(P^tBu)₆(PPh₃)₂] By the reaction of cyclophosphines with transition metal carbonyl-derivatives polynuclear complexes are built, in which the PR-ligands (R = organic group) are bonded in different ways to the metal. Depending on the reaction conditions the following compounds can be characterized: [Co₄(CO)₁₀ · (PⁱPr)₂] ( 2 ), [Fe₃(CO)₉(P^tBu)(PPh)] ( 3 ), [Cp₃Fe₃(CO)₂(PP^tBu) · (P^tBu)] ( 4 ), [(NiPPh₃)₂(PⁱPr)₆] ( 5 ), [(NiPPh₃)Ni{(P^tBu)₃}₂] ( 6 ) and [Ni₈(P^tBu)₆(PPh₃)₂] ( 7 ). The structures of 2–7 were obtained by X-ray single crystal structure analysis ( 2 : space group Pccn (No. 56), Z = 4, a = 1001,4(2) pm, b = 1375,1(3) pm, c = 1675,5(3) pm; 3 : space group P2₁ (No. 4), Z = 2, a = 914,3(4) pm, b = 1268,7(4) pm, c = 1028,2(5) pm, β = 101,73(2)°; 4 : space group P1 (No. 2), Z = 2, a = 946,0(5) pm, b = 1074,4(8) pm, c = 1477,7(1,0) pm, α = 107,63(5)°, β = 94,66(5)°, γ = 111,04(5)°; 5 : space group P1 (No. 2), Z = 2, a = 1213,6(2) pm, b = 1275,0(2) pm, c = 2038,8(4) pm, α = 92,810(10)°, β = 102,75(2)°, γ = 93,380(10)°; 6 : space group P1 (No. 2), Z = 2, a = 1157,5(5) pm, b = 1371,9(6) pm, c = 1827,6(10) pm; α = 69,68(3)°, β = 80,79(3)°, γ = 69,36(3)°; 7 : space group P3 (No. 147), Z = 1, a = 1114,1(2) pm, b = 1114,1(2) pm, c = 1709,4(3) pm).     

含硅铁键环状化合物[Me2Si-η5-C5H4Fe(CO)(PPh3)][Me2Si-η5-C5H4Fe- (CO)2－n(PPh3)n] (n＝0或1)的合成与结构

鉴于含硅-过渡金属键化合物作为催化剂具有重要的应用价值, 在我们最近发现的化合物(η⁵,η⁵-C₅H₄Me₂SiSi-Me₂C₅H₄)Fe₂(CO)₄ (1)的硅硅键和铁铁键复分解重排反应可以有效地合成含有两个硅铁键的环状化合物[Me₂Si-η⁵-C₅H₄- Fe(CO)₂]₂ (2)的基础上, 对该硅铁键环状化合物的三苯基膦取代衍生物[Me₂Si-η⁵-C₅H₄-Fe(CO)(PPh₃)][Me₂Si-η⁵-C₅H₄Fe(CO)_2－n(PPh₃)_n] (3: n＝0, 5: n＝1)的合成方法进行了研究. 发现化合物1在三苯基膦存在下的复分解重排反应是合成单三苯基膦取代产物3的最好方法; 而双三苯基膦取代化合物5则可通过光照条件下2与三苯基膦发生羰基取代反应而得到, 产物中含有的顺反异构体可利用制备薄层色谱法分离. 利用X射线衍射法测定了化合物3的分子结构, 考察了三苯基膦配体的存在对分子结构的影响以及三苯基膦与铁形成的配位键的稳定性.     

Syntheses and Crystal Structures of Two Novel 1-D Metal Complexes with Dicyanamide： [Zn（pheen）（dca）2]n and [Cu（quin）2（dca）2]n

1 INTRODUCTION Polymeric transition metal complexes with di-cyanamide have attracted considerable attention because of their interesting coordination and phy-sical properties in recent years[1]. The dicyanamide is a versatile ligand coordinated to metal…     

Synthesis and Crystal Structure of [Cu2（DMF）（H2O）（C7H4NO4）2（C7H3NO4）]2·3.5DMF

A new copper（H） complex [Cu2（DMF）（H2O）（C7H4NO4）2（C7H3NO4）]2-3.5DMF has been synthesized and its structure was determined by single-crystal X-ray diffraction. The crystal is of triclinic, space group P1^- with a = 10.722（3）, b = 18.170（4）, c = 20.923（7）A,α = 105.297（9）, β = 101.701（10）, γ = 105.74（1）°, V= 3615（1）A^3, Z = 2, C58.50H64.50Cu4N1l.50O3150, Mr = 1686.90, Dc = 1.550 g/cm^3,μ= 1.255 mm^-1, F（000） = 1728.00, T = 150（2） K, the final R = 0.0640 and wR = 0.173 for 11310 observed reflections with I 〉 2σ（I）. In the crystal, each formular unit consists of two dinuclear copper（H） compounds, between which the O-H…O hydrogen bonds exist. Each Cu^Ⅱ cation is six-coordinated in an octahedral geometry. The intermolecular hydrogenbonding interaction leads to a 3-D framework of the title compound.