Thermochemistry of Pd–In,Pd–Sn and Pd–Zn alloy systems

The standard enthalpy of formation of several Pd–M alloys (M = In, Sn and Zn) has been measured using a high temperature direct drop calorimeter. The reliability of the calorimetric results has been determined and supported by using different analytical techniques: light optical microscopy, scanning electron microscopy equipped with electron probe microanalysis (EPMA with EDS detector) and X-ray powder diffraction analysis. The values of Δ_fH (kJ/mol atoms) for the following phases were obtained for the formation in the solid state at 300 K: PdIn (49 at.%In): ?69.0 ± 1.0; Pd₂In₃ ?57.0 ± 1.0; Pd₃In₇: ?43.0 ± 1.0; PdSn₂: ?50.0 ± 1.0; Pd₂Zn₉ (77 at.%Zn): ?33.7 ± 1.0; Pd₂Zn₉ (78 at.%Zn): ?34.0 ± 1.0; Pd₂Zn₉ (80 at.%Zn): ?35.0 ± 1.0. The results show exothermic values which increase from the Pd–Zn to the Pd–Sn and Pd–In systems; the data obtained have been discussed in comparison with those available in literature.     

Synthesis and characterization of Sibunit-supported Pd–Ga,Pd–Zn,and Pd–Ag catalysts for liquid-phase acetylene hydrogenation

Pd/Sibunit and Pd–M/Sibunit (M = Ga, Zn, or Ag) catalysts have been synthesized, and their catalytic properties in liquid-phase acetylene hydrogenation have been investigated. Doping of the palladium catalyst with a metal M leads to the formation of the Pd₂Ga, PdZn, or Pd_0.46Ag_0.54 bimetallic compound. The bimetallic particles are much smaller (1.6–2.0 nm) than the monometallic palladium particles (4.0 nm). Doping with zinc raises the ethylene selectivity by 25% without affecting the activity of the catalyst. Specific features of the effect of each of the dopants on palladium are reported.     

Calorimetric investigation of order–disorder transition in Cu0.6Pd0.4 and Cu0.85Pd0.15 alloys

Order–disorder phase transitions in Cu_0.6Pd_0.4 and Cu_0.85Pd_0.15 alloys have been investigated using differential scanning calorimetry and drop calorimetry. The differential scanning calorimetry measurements show that the transition in both these alloys are reversible in nature and the enthalpy increment measurements reveal that these transitions are first order in nature. The transition temperature of first-order phase transition in Cu_0.6Pd_0.4 and Cu_0.85Pd_0.15 alloys have been evaluated to be 884(±2) and 799(±2) K, respectively, from drop calorimetric measurements. The latent heat of first-order phase transition in Cu_0.6Pd_0.4 alloy were evaluated to be 31.2(±0.6) and 28.9(±0.5) J g^?1, by enthalpy increment and differential scanning calorimetry measurements, respectively. Similarly, the latent heat of first-order phase transition in Cu_0.85Pd_0.15 alloy were evaluated to be 23.1(±0.6) and 21.3(±0.5) J g^?1, by enthalpy increment and differential scanning calorimetry measurements, respectively. The solidus temperatures of Cu_0.6Pd_0.4 and Cu_0.85Pd_0.15 alloys were found to be 1,457(±2) and 1,360 K, respectively.     

Heterobimetallic Re–Pd,Re–Au and Re–Cu complexes derived from diphenylphosphino cyrhetrene: Synthesis and X-ray structure

Diphenylphosphinecyrhetrene ligand (η⁵-C₅H₄PPh₂)Re(CO)₃ (1) reacts with 1 equiv. of PdCl₂(NCPh)₂ to form, after workup, the square-planar trans-[(η⁵-C₅H₄PPh₂)Re(CO)₃]PdCl₂(NCMe) (2). Similarly, reaction of 1 with (tetrahydrothiophene)AuCl produces, in excellent yield, the bimetallic complex [(η⁵-C₅H₄PPh₂)Re(CO)₃]AuCl (3) with a linear P–Au–Cl moiety. From the reaction of 2 equiv. of 1 with CuBr(SMe₂) the planar-trigonal complex [(η⁵-C₅H₄PPh₂)Re(CO)₃]₂CuBr (4) was obtained. ³¹P NMR and X-ray crystallography demonstrate, for the three cases, that (η⁵-C₅H₄PPh₂)Re(CO)₃ acts as a monodentate ligand. The structural parameters of the bimetallic complexes are compared with related diphenylphosphinoferrocene metal complexes, described in the literature.     

Prediction of Vapor–Liquid Equilibria for Pb–Pd and Pb–Pt Alloys Using Ab Initio Methods in Vacuum Distillation

The vapor–liquid equilibrium (VLE) phase diagrams of Pb–Pd and Pb–Pt alloy systems in vacuum distillation were obtained based only on pure-component properties and the structures of the atoms. The interaction energies between pairs of atoms were calculated from ab initio methods and were used as the input energy parameters for the Wilson equation. The calculated activity data of the components, using energy parameters which were obtained by ab initio methods, are in good agreement with the experimental data. It is revealed that a cluster size of eight atoms, optimized using the NVT ensemble at 300 K, a time step of 1 femtosecond, and the simulation time 10 ps gives a good representation of the liquid phase systems. This approach can be used to obtain accurate VLE predictions for alloy systems in vacuum distillation. The VLE phase diagram has a significant advantage in guiding experiment and industrial production in vacuum metallurgy.     

Synthesis,spectroscopic, luminescent and electrochemical studies of new Ru–Ni–Ru and Pd–Ni–Pd trinuclear complexes with an azolo-linked tetraaza macrocycle

Ru–Ni–Ru and Pd–Ni–Pd trinuclear complexes containing azolo [thiazolo (L¹) and triazolo (L²)] linked 6,8,15,17-tetramethyldibenzo-5,9,14,18-tetraazacyclotetradecene nickel(II) diacetate as a bridging ligand were synthesised and characterized by elemental analysis, conductance and i.r., u.v.–vis., ¹H-n.m.r. spectra and FAB-mass data. The luminescent and electrochemical properties of the complexes were also studied.     

Crystal structure of natural Ag–Cu–Pb–Bi sulfide

The crystal structure of a natural sulfide Cu_3,44Ag_0,56Pb₂Bi₆S₁₃ (Сmcm, Z = 4, a = 3.973(1) Å, b = 13.370(2) Å, c = 42.182(7) Å, R = 0.059) is determined. The structure has seven cation positions: two of them (Cu and Ag) are in a tetrahedral environment of sulfur atoms; one (Pb), in a special position (mm2), has a coordination polyhedron in the form of a bicapped trigonal prism; and the other cation positions are surrounded by sulfur atoms forming distorted octahedra. The mirror symmetry plane perpendicular to the c translation causes microtwinning by cutting a layer of trigonal prisms framed by tetrahedron ribbons. These layers are divided by those composed by edge-linked octahedra with a diagonal ribbon of five octahedra (N = 5). The cation and anion positions are ordered by individual sublattices with pseudohexagonal subcells on the m planes perpendicular to the a translation, which concentrate the positions of all the atoms. Supposedly, this natural sulfide is the previously described (1885) yet unconfirmed alaskaite mineral from the lillianite–heyrovskyite homological series and may be isostructural to the ourayite mineral.     

Solvothermal preparation,and characterization,of Cu–Ag nanoparticles

Cu–Ag nanoparticles have been successfully synthesized by one-pot solvothermal treatment of a mixture of AgNO₃ and Cu(OAc)₂·H₂O in ethylene glycol solution at 180 °C for 10 h. The samples were characterized by UV–visible absorption, X-ray diffraction (XRD), and extended X-ray absorption fine structure (EXAFS) spectroscopy, transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDS). The results showed that Cu–Ag nanoparticles and a small amount of phase-separated Cu–Ag alloy nanoparticles with an average diameter of 100 ± 30 nm were synthesized by the solvothermal treatment procedure. The mechanism of formation is discussed.     

Thermal decomposition and reducibility of silica-supported precursors of Cu,Fe and Cu–Fe nanoparticles

Journal of Thermal Analysis and Calorimetry - Poly(butylene succinate) (PBS) nanocomposites filled with nanoprecipitated calcium carbonate (NPCC) were prepared via melt blending. The hybrid...     

Complexes of Cu(I) and Pd(II) with (+)-camphor and (–)-cavrone thiosemicarbazones: Synthesis,structure, and cytotoxicity of the Pd(II) complex

CuLCl, CuL¹Cl, PdLCl₂, and PdL¹Cl₂ complexes [L and L¹ being (+)-camphor and (–)-carvone thiosemicarbazones, respectively] have been synthesized. The structure of binuclear [Pd₂L²²Cl₄] complex has been determined by means of X-ray diffraction. The L² ligand (dehydrogenated (–)-carvone thiosemicarbazone) is coordinated via the bridging S atom to two Pd atoms. The complexes of Cu(I) and Pd(II) presumably have polynuclear and binuclear structure, respectively. These facts are in good agreement with IR and NMR spectroscopy as well as mass spectrometry data which indicate the coordination of L and L¹ ligands via the S atom. The influence of L¹ and PdL¹Cl₂ on viability of the Hep2 cell line has been studied. The PdL¹Cl₂ complex is more cytotoxic than L¹ ligand.     

Thermal stability of Ag–Au,Cu–Au,and Ag–Cu bimetallic nanoparticles supported on highly oriented pyrolytic graphite

The formation of Ag–Au, Cu–Au, and Ag–Cu bimetallic particles on the surface of highly oriented pyrolytic graphite was studied by X-ray photoelectron spectroscopy. Samples with the core–shell structure of particles were prepared by sequential thermal vacuum deposition. The thermal stability of the samples was studied over a wide range of temperatures (25-400°C) under ultrahigh-vacuum conditions. The heating of the samples to ~250°C leads to the formation of bimetallic alloy particles with a relatively uniform distribution of metals in the bulk. The thermal stability of the samples with respect to sintering depends on the nature of the supported metals. Thus, the Ag–Au particles exhibited the highest thermal resistance (~350°C) under ultrahigh-vacuum conditions, whereas the Ag–Cu particles agglomerated even at ~250°C.     

Synthesis,crystal structure,thermal decomposition,and XPS studies of homo and heterotrinuclear Cu(II)–Cu(II)–Cu(II) and Cu(II)–Ni(II)–Cu(II) complexes obtained from salpn type ligands

In this study, a mononuclear CuL complex was prepared by the use of bis-N,N′-(salicylidene)-1, 3-propanediamine (LH₂) and Cu²⁺ ion. NiCl₂ and NiBr₂ salt were treated with this complex in dioxanewater medium and two new complexes [(CuL)₂NiCl₂(H₂O)₂] and [(CuL)₂NiBr₂(H₂O)₂)] with Cu(II)–Ni(II)–Cu(II) nucleus structure were obtained. In addition to this bis-N,N′-(2-hydroxybenzyl)-1,3-diaminopropane (L^HH₂) was prepared by the reduction of LH₂ with NaBH₄ in MeOH medium. The treatment of this reduced complex with Cu²⁺ ion resulted a complex [(CuL^H)₂CuCl₂] with a structure of Cu(II)–Cu(II)–Cu(II). The complexes prepared were characterized by the use of elemental analysis, IR spectroscopy, thermogravimetric and X-ray diffraction methods. The crystal structures of [(CuL)₂NiBr₂(H₂O)₂] (СIF file CCDC 1448402) and [(CuL^H)₂CuCl₂] (СIF file CCDC 1448401) complexes were elucidated. It was found that halogen ions are coordinated to terminal Cu²⁺ ions which are in a distorted square pyramid coordination sphere. It was determined that the central Cu(II), which joins terminal square pyramidal Cu(II), was coordinated only by the phenolic oxygens of the ligand while the central Ni(II) was coordinated by two phenolic oxygens of the organic ligand and two water molecules. These complexes were investigated by XPS and it was found that the terminal and central Cu²⁺ ions were different in Cu(II)–Cu(II)–Cu(II) complex. Also, the thermal degradation of the CuLH complex unit was observed to exothermic in contrast to the expectations.

     

Structure and thermal properties of heterometallic complexes for chemical vapor deposition of Cu–Pd films

Novel volatile heterocomplex compounds based on copper(II) and palladium(II) fluorinated β-diketonates are studied. The crystals of the synthesized compounds are shown to be composed of 1D coordination polymers in the form of chains of alternating molecules of monometallic complexes. The crystallographic data for [Cu(hfa)₂?Pd(zif)₂] are as follows: C₂₆H₂₂F₁₈O₁₀CuPd, P2₁/c, a = 7.9947(18) Å, b = 19.277(4) Å, c = 13.609(3) Å, β = 118.298(15)°, V = 1846.7(7) ų, Z = 2, d = 1.810 g/cm³. The thermal properties of the compounds are examined by TG-DTA and vacuum sublimation. The complexes are studied as the precursors for producing copper-palladium alloy films by chemical vapor deposition. It is demonstrated that bimetallic alloy coatings with a ratio Cu/Pd = 1:1 can be prepared from [Cu(hfa)₂?Pd(zif)₂].     

Preparation of carbon supported Pd–Pb hollow nanospheres and their electrocatalytic activities for formic acid oxidation

Pd–Pb hollow nanospheres dispersed on carbon black were developed by a galvanic replacement reaction between sacrificial cobalt nanoparticles and Pd²⁺, Pb²⁺ ions. The as-prepared catalysts were characterized by transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD). The electrochemical measurements show that the as-prepared catalysts have excellent catalytic activity for formic acid electrooxidation, which is attributed to the large surface area caused by the hollow structure and the lead doping effect which might modify the electronic structure of the catalysts.     

Determination of Cu,Cd, Ni,Pb and Zn in Edible Oils Using Reversed-Phase Ultrasonic Assisted Liquid–Liquid Microextraction and Flame Atomic Absorption Spectrometry

A simple and green reversed-phase ultrasonic assisted liquid?liquid microextraction method for determination of Cu, Cd, Ni, Pb and Zn in edible oils was developed. Detection was carried out by flame atomic absorption spectrometry. The influence of main parameters including ultrasonic time and temperature, disperser solvent, volume of extracting solvent and centrifuging time on the extraction efficiency of target analytes were investigated and optimized. In the proposed method, a few microliters of water (containing 3%, v/v, nitric acid) as extracting solvent was injected into the oil sample and mixture transferred to ultrasonic bath. Then, the mixture was centrifuged in order to accelerate in phase separation. Finally, the aqueous phase was removed and delivered to flame atomic absorption spectrometer. Calibration curves for all metals were linear in the range of 5?100 ng/mL. The limit of detections for Cu, Cd, Ni, Pb and Zn were 0.8, 0.3, 0.5, 1.5 and 0.5 ng/mL, respectively. Relative standard deviation (RSD) values were in the range of 0.6?1.9%. The recoveries were in the range of 95.2–101.2% with RSD values ranging from 0.8 to 1.9%. The proposed method was applied successfully for the determination of interested metals in commercial edible oils.     

Phase equilibria in the palladium-rich part of the Pd–Au–Cu–Sn quaternary system

The solubility of tin in the phases of Pd–Au–Sn and Pd–Cu–Sn ternary systems and a Pd–Au–Cu–Sn quaternary system with a fixed Pd: Au: Cu ratio of 11.1: 1: 4.6 is studied via microstructural, X-ray diffraction, and energy dispersive analysis. It is found that a quaternary alloy in equilibrium with a solid solution based on Pd, Au, and Sn contains a τ₁ compound with structure which is derivative of the In type. It contains ~15 at % Sn and is a solid solution of the same compounds identified earlier in Pd–Au–Sn and Pd–Cu–Sn ternary systems. In addition, a quaternary alloy with a content of 20 at % Sn also contains a τ₂ compound with the Pd₂CuSn own type and can barely dissolve gold. The obtained data are used to construct a three-dimensional model of the Pd-rich part of the isothermal tetrahedron of the Pd–Au–Cu–Sn system and diagrams of the tin solubility isolines in palladium-rich alloys of the quaternary system at 500°С.     

Mass Spectrometric Studies on Metal-hexafluorobenzene Anionic Complexes（M=Ag, Au, Pd, Pt, Pb and Bi）

The anionic products from the reactions between metal(M=Ag, Au, Pd, Pt, Pb and Bi) vapour produced by laser ablation and hexafluorobenzene seeded in carrier gas(Ar) were studied by means of a homemade reflectron time-of-flight mass spectrometry(RTOF-MS). Experimental results show that the dominant products were [MmC6F6]-complexes for the reactions of Ag, Au, Pd and Pt with C6F6, while the dominant products were [MmC6F5]-complexes for the reactions of Pb and Bi with C6F6. The formation mechanisms of the prod...     

Surface tension of liquid high-entropy equiatomic alloys of a Cu–Sn–Bi–In–Pb system

An experimental study of the temperature dependences of the surface tension of liquid high-entropy equiatomic alloys of a Cu–Sn–Bi–In–Pb system is conducted. Measurements are made within the temperature range of t _L to 1300°C in the mode of heating and subsequent cooling of a sample. Overcooling of a melt prior to crystallization is detected. The depth of overcooling grows along with the number of components in the melt, while the temperature coefficient of surface tension falls. The experimental results qualitatively interpreted within the concepts of the specific surface entropy of a liquid.     

Three Heterometallic Mo–M′ Cubane-Like Tetranuclear Cluster Compounds (M′=Cu, Pb, Sb): Synthesis, Structure and Third-Order NLO Property

Three new heterometallic tetranuclear cluster compounds with a [Mo₃YS₃M] cubane-like cluster core (M=Cu, Pb, Sb; Y=O, S), [Mo₃OS₃(CuI)(-OAc)₂(dtp)₂(DMF)] (1), (dtp=S₂P(OC₂H₅)^– ₂), [Mo₃OS₃(PbI₃)(dtc)₃(py)₃] (2) (dtc=S₂CN(C₂H₅)^– ₂), [Mo₃S₄(SbI₃)(dtcpyr)₄(py)]·2H₂O (3) (dtcpyr=S₂CNC₄H^– ₈) have been synthesized and structurally characterized by IR, Raman, UV–Vis, ¹H NMR, ¹³C NMR spectroscopies and single-crystal X-ray diffraction studies. Their structure and bonding features are discussed. Compounds 1 and 2 show a good third-order optical nonlinearity, as measured by degenerate four-wave mixing technique.