Electronic perturbations of iron dipyrrinato complexes via ligand β-halogenation and meso-fluoroarylation

Systematic electronic variations were introduced into the monoanionic dipyrrinato ligand scaffold via halogenation of the pyrrolic β-positions and/or via the use of fluorinated aryl substituents in the ligand bridgehead position in order to synthesize proligands of the type 1,9-dimesityl-β-R(4)-5-Ar-dipyrrin [R = H, Cl, Br, I; Ar = mesityl, 3,5-(F(3)C)(2)C(6)H(3), C(6)F(5) in ligand 5-position; β = 2,3,7,8 ligand substitution; abbreviated ((β,Ar)L)H]. The electronic perturbations were probed using standard electronic absorption and electrochemical techniques on the different ligand variations and their divalent iron complexes. The free-ligand variations cause modest shifts in the electronic absorption maxima (λ(max): 464-499 nm) and more pronounced shifts in the electrochemical redox potentials for one-electron proligand reductions (E(1/2): -1.25 to -1.99 V) and oxidations (E(1/2): +0.52 to +1.14 V vs [Cp(2)Fe](+/0)). Installation of iron into the dipyrrinato scaffolds was effected via deprotonation of the proligands followed by treatment with FeCl(2) and excess pyridine in tetrahydrofuran to afford complexes of the type ((β,Ar)L)FeCl(py) (py = pyridine). The electrochemical and spectroscopic behavior of these complexes varies significantly across the series: the redox potential of the fully reversible Fe(III/II) couple spans more than 400 mV (E(1/2): -0.34 to +0.50 V vs [Cp(2)Fe](+/0)); λ(max) spans more than 40 nm (506-548 nm); and the (57)Fe M?ssbauer quadrupole splitting (|ΔE(Q)|) spans nearly 2.0 mm/s while the isomer shift (δ) remains essentially constant (0.86-0.89 mm/s) across the series. These effects demonstrate how peripheral variation of the dipyrrinato ligand scaffold can allow systematic variation of the chemical and physical properties of iron dipyrrinato complexes.     

Electrochemical studies and semiempirical calculations on π-conjugated dienones and heterocyclic nitrogen containing donor ligand molecules

Reduction potentials for the first electron transfer to a broad selection of nitrogen containing bi- and polydentate molecules considered as potential ligands have been determined. Results are compared with data obtained with semiempirical and UV-Vis spectroscopic data. Close correlations for the investigated molecules are observed. Systematic differences in properties of molecules with and without the keto moiety can be explained by invoking molecular orbital and surface interaction arguments. Similar structural arguments can be used to explain the behaviour of 2,4,6-tripyridin-2–yl[1,3,5]triazine. UV-Vis data match closely those derived from HOMO-LUMO calculations for these molecules.

Biphenylamide ligand complexes of Li and Al: hemilabile arene donors?

Biphenylamide ligands were employed to prepare a series of Li and Al derivatives in which the ligand binds through N. Such species include: (2-C(6)H(4)Ph)Bu(t)NLi (), (2-C(6)H(4)Ph)Bu(t)NLi(THF)(2) (), (2-C(6)H(4)Ph)Bu(t)NLi.OEt(2) (), [(mu-(2-C(6)H(4)Ph)(2)N)Li](2) (), (2-C(6)H(4)Ph)(2)NLi(THF)(2) (), (2-C(6)H(4)Ph)(2)NLi.OEt(2) () amd (2-C(6)H(4)Ph)(2)NAlX(2) (X = Cl (), Me (), Et ()). Structural and spectroscopic data show that these species exhibit weak arene to metal donation. This donor is hemilabile being readily displaced by other stronger donors to give such species as (2-C(6)H(4)Ph)(2)NAlMe(2)(THF) () and (2-C(6)H(4)Ph)(2)NAlMe(2)(CH(2)PPh(3)) (). Reactions of with B(C(6)F(5))(3) results in methyl for C(6)F(5) exchange and isolation of (2-C(6)H(4)Ph)(2)NAl(C(6)F(5))(2) (). The presence the electron withdrawing groups in further strengthens the hemilabile interaction.     

Synthesis and structure of catena cadmium complex with 2-hydroxo-l-naphthaldehyde thiosemicarbazono tetradentate ligand

The tide ligand (H2L) and its complex [CdL(py)2]py (L= C12H9N3OS dianionic) have been synthesized and characterized. The complex structure determination indicates that Cd( Ⅱ ) atom has a distorted octahedral coordination geometry. As an unusual tetradentate ligand, one L2- chelates one Cd( Ⅱ ) atom using the 0, S atoms and one N atom of the hydrazino group while its another N atom links to the neighbouring Cd atom. The bridging hydrazono groups extend the compound into a catena chain. The naphthoxy rings of each neighbouring unit are alternatively arranged at opposite sides of the chain, and the ring planes on the same side are parallel.     

Mixed ligand monolithic columns for reversed-phase capillary electrochromatography via hydrophobic and π interactions

Novel mixed ligand monoliths (MLM) for capillary electrochromatography (CEC) of a wide range of solutes differing in both polarity and size were introduced. The MLM capillary columns were based on the different compositions of octadecyl acrylate (ODA) and 2-naphthyl methacrylate (NAPM) monomers in the presence of trimethylolpropane trimethacrylate (TRIM) crosslinker and a ternary porogenic solvent made up of cyclohexanol, ethylene glycol, and water. As expected, the magnitude of the electroosmotic flow (EOF) changed with the composition of the MLM. As the percent of the monomer ODA in the polymerization mixture was increased, the EOF increased to a maximum at 50-mol% ODA and then leveled off at 75-mol% and 100-mol% ODA, an indication that the ODA ligand in general exhibited a higher binding for the mobile-phase ions than the NAPM ligand. This is due to the fact that the ODA is an acrylate-based monomer, whereas the NAPM is a methacrylate-based monomer. While ODA provided solely nonpolar interactions, NAPM exhibited both nonpolar and π interactions with certain solutes. It was found out that columns with a given composition of both ligands yielded a unique selectivity for a given set of solutes that was not matched by columns made by either ODA or NAPM alone. Several test mixtures were used in the evaluation of the MLM columns including polycyclic aromatic hydrocarbons, alkyl phenyl ketones, nitroalkanes, alkylbenzenes, toluene derivatives, peptides, and proteins. Peptide mapping of the tryptic digest of the standard lysozyme protein was also studied.     

Synthesis and properties of group 9 metal complexes bearing a β-ketophosphenato ligand

A novel β-ketophosphenato ligand bearing a bulky substituent, Tbt(2,4,6-tris[bis(trimethylsilyl)methyl]phenyl), on the phosphorus atom was newly designed and synthesized as a heavier congener of a β-ketoiminato ligand. Rhodium and iridium complexes bearing this new β-ketophosphenato ligand have been synthesized and fully characterized by spectroscopic and elemental analyses together with X-ray crystallographic analyses. The results of NMR spectroscopic studies and the X-ray structural analyses suggested that the β-ketophosphenato ligand has unique electronic features due to the low-coordinated phosphorus atom. Comparison of properties between rhodium β-ketophosphenates 2a,b and rhodium β-ketoiminate 7 revealed the character of the β-ketophosphenato ligand, where the trans influence of the phosphorus atom should be stronger than the nitrogen atom of the β-ketoiminato ligand.     

Synthesis and structure of a boron cation supported by a β-diketiminate ligand

The salt [HC(CMe)₂(NAr)₂BPh][Al₂Cl₇] (3); Ar = 2,6-i-Pr₂C₆H₃) has been synthesized via the in situ preparation of [HC(CMe)₂(NAr)₂BClPh], followed by treatment with AlCl₃. X-ray analysis of 3 reveals that the BN₂C₃ ring of the boron cation is planar and DFT calculations indicate π-type interactions in the HOMO-6 and HOMO-7 orbitals.     

Synthesis and fluorescence properties of novel pyrazine-boron complexes bearing a β-iminoketone ligand

A novel fluorescence dye based on pyrazine-boron complexes bearing a β-iminoketone ligand has been synthesized by using a simple two-step reaction. Synthesized complexes exhibited fluorescence in solution (F(max): 472-604 nm) and in the solid state (F(max): 496-624 nm). These complexes showed a larger Stokes shift (3690-4900 cm(-1)) than well-known boron dipyrromethene dyes (400-600 cm(-1), in most cases).     

Syntheses, structures, and properties of metal complexes involving π-conjugated tetrathiafulvalene-pyridine ligand

Four metal complexes based on the phenyl-bridged pyridine ligand with tetrathiafulvalene unit (TTF-Ph-Py, L), Ni^II(acac)₂(L)₂ (1, acac = acetylacetonate), M(hfac)₂(L)₂ (M = Ni^II, 2; M = Cu^II, 3; hfac = hexafluoroacetylacetonato) and [Co^II(Tp^Ph2)(OAc)(L)]·H₂O (4, Tp^Ph2 = hydridotri(3,5-diphenylpyrazol-1-yl) borate), have been synthesized and structurally characterized. The absorption spectra and redox behaviors of these new compounds have been studied. Optimized conformation and molecular orbital diagram of L has been calculated with density functional theory (DFT).     

Synthesis and X-ray structure of cationic β-diimine palladium complexes containing π-methallyl ligand

High yield of cationic palladium β-diimine complexes [(CH₂(MeCNAr)₂)Pd(η³-C₄H₇)][Y] (Ar = C₆H₅, Y = PF₆ (8); 2-Me-C₆H₄, Y = PF₆ (9); 2,6-Me₂-C₆H₃, Y = PF₆ (10); 2,6-iPr₂-C₆H₃, Y = PF₆ (11), Y = B(3,5-(CF₃)₂-C₆H₃)₄ (12)) have been obtained by an oxidative addition of the methallyloxyphosphonium salts (5, 6) to a preformed complex Pd(dba)₂ (7) in the presence of the β-iminoamine ligands (1-4).These complexes are thermally stable and have been characterized by ¹H and ¹³C{¹H} NMR as well as IR spectroscopy. The structure of the cationic allyl palladium complex (12) has been solved by X-ray crystallography.     

Synthesis,structure and magnetic properties of manganese（Ⅱ） coordination polymer with azido and zwitterionic dicarboxylate ligand

A coordination polymer formulated as {[Mn2L（N3）4]·2H2O）n（1） [L = 1,4-bis（pyridinil-3-carboxylato）-1,4- dimethylbenzene] was synthesized and structurally and magnetically characterized. The uniform Mn（Ⅱ） chains with mixed （μ-EO-N3）2（μ-COO） triple bridges （EO = end-on） are linked by L ligands to generate a 2-fold interpenetrating 3D framework. Meanwhile, magnetism analysis reveals antiferromagnetic coupling for 1.     

Tetra-nuclear copper complex having P–N–P ligand to P–O–P ligand – synthesis,structural, and mechanistic studies

We report the synthesis and structures of three copper(I) complexes, [Cu₄(μ₃-Cl)₂(μ₂-Cl)₂{μ₂-(2,6-Me₂C₆H₃N(PPh₂)₂)}₂] (2), [Cu₄(μ₃-Cl)₂(μ₂-Cl)₂{μ₂-(Ph₂POPPh₂)}₂] (4), and [Cu₂(μ₂-Cl)₂(μ₂-PPh₂OPPh₂)(η¹-Ph₂PP(=O)Ph₂)(PPh₃)] (5), and one cobalt complex, [(CoCl₂){μ₂-2,6-Me₂C₆H₃N(PPh₂)₂}₂][CoCl₃NH₂(2,6-Me₂Ph)] (3). Tetra-nuclear copper complex 2 was prepared in good yield by the reaction of bis(diphenylphosphino)-2,6-dimethylaniline [2,6-Me₂C₆H₃N(PPh₂)₂] (1) with copper(I) chloride along with triphenylphosphine in methanol. Adding a calculated amount of water and dichloromethane mixture (1?:?10) to 2 produced a second tetra-nuclear copper(I) complex, 4, with a P–O–P backbone, along with a small amount of the unsymmetrical copper(I) complex 5. The cobalt complex 3 was obtained by reaction of 1 with cobalt(II) chloride. The solid-state structures of 2–5 were established by single-crystal X-ray diffraction analysis. In the solid state, both 2 and 4 form a tetra-nuclear copper core. In the ³¹P{¹H} NMR study, we observed the conversion of 2, with P–N–P backbone, to 4, with P–O–P backbone.     

Synthesis and crystal structures of coordination polymers,networks and complexes of an adamantane shaped phosphorus–nitrogen cage ligand and cuprous chloride

Reactions of cuprous chloride with the phosphorus–nitrogen cage ligand 2,4,6,8,9,10-hexamethyl-2,4,6,8,9,10-hexaaza-1,3,5,7-tetraphosphaadamantane, P₄(NCH₃)₆, in acetonitrile form distinct solids depending on the ligand-to-metal ratio. Three structurally characterized compounds include: a solvated 3-D network of formula [P₄(NCH₃)₆]₂(CuCl)₃(CH₃CN)₂; a “ladder-type” polymer {[μ₂-P₄(NCH₃)₆]₂(CuCl)₂}_∞; and a monomeric complex [P₄(NCH₃)₆]₂CuCl. Thermal decomposition of the solvated network results in formation of two more materials [P₄(NCH₃)₆]₂(CuCl)₃, and [P₄(NCH₃)₆](CuCl)₂ that are not isolated from solution reactions. The variety of products isolated based solely on ligand-to-metal ratio suggest that this system participates in solution equilibria common to many phosphorus(III) ligands and multiple solubility equilibria.     

Studying protein–protein affinity and immobilized ligand–protein affinity interactions using MS-based methods

This review discusses the most important current methods employing mass spectrometry (MS) analysis for the study of protein affinity interactions. The methods are discussed in depth with particular reference to MS-based approaches for analyzing protein–protein and protein–immobilized ligand interactions, analyzed either directly or indirectly. First, we introduce MS methods for the study of intact protein complexes in the gas phase. Next, pull-down methods for affinity-based analysis of protein–protein and protein–immobilized ligand interactions are discussed. Presently, this field of research is often called interactomics or interaction proteomics. A slightly different approach that will be discussed, chemical proteomics, allows one to analyze selectivity profiles of ligands for multiple drug targets and off-targets. Additionally, of particular interest is the use of surface plasmon resonance technologies coupled with MS for the study of protein interactions. The review addresses the principle of each of the methods with a focus on recent developments and the applicability to lead compound generation in drug discovery as well as the elucidation of protein interactions involved in cellular processes. The review focuses on the analysis of bioaffinity interactions of proteins with other proteins and with ligands, where the proteins are considered as the bioactives analyzed by MS.     

A novel terbium complex using oxadiazole derivative as a neutral ligand： Synthesis and properties

A novel terbium complex using 1,3,4-oxadiazole derivative as a neutral ligand was synthesized and characterized. Its thermal stability and photoluminescent properties were studied. The strong emission peaked at 546 nm with a full width at half maximum of 5 nm was observed in the pure terbium complex film under excitation of 328 nm light, which is attributed to the characteristic emission of terbium ion. The good thermal stability and intense sharp emission of this terbium complex display its potential application in electroluminescence devices.     

Spectroscopic and electrochemical study of dinuclear and mononuclear copper complexes with the bidentate ligand of the 2,2′-diquinoline series

The newly synthesized complex (2) of copper(I) chloride with di-n-hexyl 2,2′-biquinoline-4,4′-dicarboxylate (L) was spectroscopically and electrochemically characterized. The X-ray diffraction study showed that the crystals of complex 2 consist of the dinuclear moieties [L₂Cu¹ ₂(μ-Cl)₂] containing Cu₂(μ-Cl)₂ clusters. Spectrophotometric studies and ESI-mass spec-trometric measurements showed that after the dissolution of complex 2 in acetonitrile (AN) and N-methyl-2-pyrrolidone (NMP), the solution contained not only the dinuclear complexes [L₂Cu¹ ₂(μ-Cl)₂] but also [L₂Cu¹]Cl, [LCu¹Cl(Sol)], and [Cu¹Cl(Sol)] (Sol is the solvent). The electrochemical data also confirm the conclusion that bridged dinuclear chloride complex 2 dissociates both in NMP and AN to form the tetrahedral bis-biquinoline complex [L₂Cu¹]Cl. In solutions of complex 2 in alcohols and _N,_N-dimethylformamide (DMF), only [L₂Cu¹]Cl and [Cu¹Cl(Sol)] are present. In EtOH, AN, and DMF, [Cu¹Cl(Sol)] undergoes disproportionation to [Cu¹¹Cl(Sol)] and Cu⁰.     

Preparation and characterization of ruthenium complexes with the new 4,4′,4″-tri-tert-butylterpyridine ligand and with 4,4′-di-tert-butylbipyridine

An efficient procedure for the preparation of 4,4′,4″-tri-tert-butylterpyridine (trpy*) which is formed together with 4,4′-di-tert-butylbipyridine (bipy*) is described, and the preparation of the complexes (trpy*)RuCl₃, [(trpy*)L₂RuCl]PF₆ (L₂ = bipy, bipy*), and (bipy*)₂RuCl₂ and their characterization by cyclic-voltametry, UV—vis and ¹H NMR spectroscopy are reported. It is shown that introduction of tert-butyl substituents increases the solubility of the resultant complexes and enhances the electron donating influence of the trpy ligand.     

Cu(Ⅰ) and Cu (Ⅱ) helical complexes formed with oligobipyridine ligand

A new asymmetric oligobipyridine ligand, 1-(5'-methyl-2, 2'-bipyridin-5-yl)-2-(6'-methyl-2, 2'-bipyridin-6-yl)ethane (L), in which the bipyridine units are bridged by CH_2CH_2 at 5, 6'-position has been synthesized. The ligand L reacts with Cu(Ⅰ) and Cu(Ⅱ) ions giving double-stranded helical complexes [Cu_2~ⅠL_2] (ClO_4)_2·Et_2O (1) and [Cu_2~ⅡL_2 (OH) (H_2O)][ClO_4]_3(2), respectively. Complexes 1 and 2 were characterized by X-ray diffraction analyses, ES-MS, ESR and cyclic voltammetry, etc. Differing from the oligobipyridine ligands bridged by CH_2CH_2 at 6,6'-or 5,5'-position, the ligand L not only forms a double-stranded helicate with Cu(Ⅰ) ion, but also gives a double-stranded helicate with Cu(Ⅱ) ion. The results show that the linkage mode of the spacer group to the bipyridine units exerts a great impact on the formation of helix.     

Organometallic dithiolene complexes of benzenedithiolate analogues with π-coordinating and π-interacting Cp* ligand

Organometallic dithiolene complexes, which were formulated as [Cp*M(dcbdt)] and [Cp*M(dcdmp)] (M = Co, Rh, Ir; Cp* = η⁵-pentamethylcyclopentadienyl, dcbdt = 4,5-dicyanobenzene-1,2-dithiolate, dcdmp = 2,3-dicyano-5,6-dimercaptopyrazine) were prepared from a low valent Cp*Co^I or high valent Cp*M^III species (M^III = Co^III, Rh^III, Ir^III). The UV-Vis absorption spectral and electrochemical data of them were obtained. The lowest absorption (HOMO-LUMO) energies of them became redshift in order of the Co > Rh > Ir complexes. The reduction potentials suggested that the central metal modifies their LUMO levels. The molecular and crystal structures of [Cp*Co(dcbdt)] (3a), [Cp*Co(dcdmp)] (4a) and [Cp*Rh(dcdmp)] (4b) were determined by X-ray diffraction studies. The cobalt complexes 3a and 4a were monomeric, formally 16-electron complexes and have two-legged piano-stool geometries. The crystal structure of 3a indicated some plane-to-plane intermolecular interactions such as benzene?benzene interaction on the dcbdt ligand and two Cp*?benzene π-π stackings. 4a showed plane-to-plane interaction with a pseudo-4-fold-symmetry arrangement between the pyrazine moieties on the dcdmp ligand. The rhodium complex 4b was dimeric in the crystal to form a criss-cross arrangement and had a three-legged piano-stool geometry, but it was monomerized in solution. The dimer of 3b was observed in the oxidation process of the cyclic voltammogram.