Synthesis, geometrical and absolute configuration of the tris(S-arginine)cobalt(III) trinitrate isomers and synthesis and molecular structure of (-)589-anti(N)-Δ-cis(N),cis(O)-Λ-cis(N),cis(O)-di-μ-hydroxo-tetrakis(S-arginine)dicobalt(III) tetranitrate tetrahydrate

In a direct synthesis reaction of the tris(aminocarboxylato)cobalt(III) complexes with S-arginine all four theoretically possible tris(S-arginine)cobalt(III) diastereomers were obtained as tripositive complex ions. Besides, one out of 24 theoretically possible isomers of di-μ-hydroxo-tetrakis(S-arginine)dicobalt(III) tetrapositive ion was obtained. Geometrical and absolute configurations of the tris(S-arginine)cobalt(III) isomers were determined by electronic and CD spectroscopy. The molecular structure of the (-)₅₈₉-anti(N)-Δ-cis(N),cis(O)-Λ-cis(N),cis(O)-di-μ-hydroxo-tetrakis(S-arginine)dicobalt(III) ion was solved by X-ray crystal structure analysis. The complexes obtained represent the first examples of cationic aminocarboxylato complexes of this type. For the first time the formation of the di-μ-hydroxo-tetrakis(aminocarboxylato)dicobalt(III) complex has been observed as a reaction concurrent to the formation of tris(aminocarboxylato)cobalt(III) complexes. Finally, the stereoselectivity of S-arginine in the tris(S-arginine)cobalt(III) isomers synthesis was discussed.     

Potential propelling and rotating functions of propeller-type complexes. I. Preparation and molecular dynamics simulation of tris(S-2,3-diaminopropionato)cobalt(III)

Four optically active geometric isomers of tris(S-2,3-diaminopropionato)cobalt(III) were prepared and separated by ion-exchange column chromatography on SP-Sephadex (C-25). The identification of the four diastereomers is based on the elution order of the complexes, elemental analysis, electronic spectra, circular dichroism spectra, ¹³C NMR spectra, X-ray structure analysis and comparison of these properties with those of analogous series consisting of three isomers of the bis(S-2,3-diaminopropionato)cobalt(III) ion. Structure optimization and molecular dynamics (MD) simulation of the system, consisting of the propeller-type complex fac-tris(S-2,3-diaminopropionato)cobalt(III) and 240 water molecules, were performed using AMBER 6. The results of the MD simulation suggest that distinct propelling and rotating behavior can be obtained in this complex in aqueous solution.     

Preparation and characterization of binuclear CuII complexes derived from diamines and dialdehydes

New macrocyclic complexes were synthesized by template reaction of 1,7-bis(2-formylphenyl)-1,4,7-trioxaheptane, 1,4-bis(2-carboxyaldehydephenoxy)butane or 1,3-bis(2-carboxyaldehydephenoxy)propane with 1,4-bis(2-aminophenoxy)butane, 1,3-bis(2-aminophenoxy)butane, 1,4-bis(4-chloro-2-aminophenoxy)butane or 1,3-bis(4-chloro-2-aminophenoxy)butane and Cu(NO₃)₂ ·?3H₂O or Cu(ClO₄)₂ ·?6H₂O, respectively. The complexes have been characterized by elemental analysis, IR, ¹H and ¹³C NMR, UV–Vis spectra, magnetic susceptibility, conductivity measurements and mass spectra. All complexes are diamagnetic and binuclear.     

1,3-Adamantanyl dimethylsiloxane copolymers. Preparation and properties

1,3-bis(Dimethylhydroxysilyl)adamantane(I) has been prepared. Thermal condensation polymerization of this monomer yields poly-1,3-adamantyl-1,1,3,3-tetramethyldisiloxane. Condensation of I with bis(dimethylamino)dimethylsilane or 1,3-bis(dimethylamino)-1,1,3,3-tetramethyldisiloxane gave the expected 1,3-adamantyl dimethylsiloxane copolymers (II and III) respectively. These polymers have been characterized by ¹H,¹³C, and ²⁹SiNMR as well as GPC and TGA. They have unusually high thermal stability.     

PREPARATION AND CHARACTERIZATION OF COBALT(III) COMPLEXES WITH SARCOSINE AND SOME TETRADENTATE LIGANDS OF THE EDDA TYPE

Abstract

Meridional geometrical isomers of cobalt(III) complexes with sarcosine (N-methylglycine) and tetradentate ligands edda (ethylenediamine-N,N′-diacetate ion), eddp (ethylenediamine-N,N′-di-3-propionate ion) and 1,3-pdda (1,3-propylenediamine-N,N′-diacetate ion) have been prepared. The edda and eddp cobalt(III) complexes were made by the reaction of sarcosine and sodium ethylenediamine-N,N′-diacetato(carbonato)cobaltate(III), and sodium uns-cis-(ethylenediamine-N,N′-di-3-propionato)(carbonato)cobaltate(III) dihydrate, respectively. The previously synthesized pdda-cobalt(III) complex with sarcosine was obtained by a new route by direct synthesis of cobalt(II) chloride hexahydrate with sarcosine and 1,3-pdda in the presents of lead(IV) oxide. Complexes were isolated chromatographically and characterized by elemental analysis, electron absorption spectra, infrared spectra and ¹H NMR spectroscopy.     

N2S2 macrocyclic ligands. Synthesis and characterization of novel transition metal complexes of the type [LM(Si2Me6NH)2]2+ and [L′M(Si2Me6NH)2]2+

Summary Novel N₂S₂ macrocyclic ligands, L and L [SS-diethyl(1,3-diaminopropane) dithiocarbamate], [SS-cyclohexyl spiro-(1,3-diaminopropane) dithiocarbamate] and their complexes with Mn^II, Fe^II, Co^II, Ni^II and Cu^II have been characterized by elemental analyses, conductivity measurements, i.r., u.v.-vis. and n.m.r. spectra. The divalent transition metal complexes appear to be square planar and achieve octahedral geometry when treated with bis(trimethylsilyl)-amine to yield new heterobimetallic complexes.     

Novel heterodinuclear transition metal macrocyclic complexes: syntheses,characterization and crystal structures

Two unsymmetrical, macrocyclic, heterodinuclear complexes, [Cu^IIM^II(L)]?(ClO₄)₂·nH₂O (n?=?3; M?=?Zn, Cd) have been obtained by cyclocondensation of N,N′-bis(3-formyl-5-n-butylsalicylidene)ethylenediimine and 1,3-diaminopropane in the presence of M²⁺. The structures of both complexes were determined by X-ray diffraction techniques. In each complex, two metals are located in the tetraimine macrocyclic cavity, and a water molecule and a perchlorate group are separately coordinated to the metal ions on the same side of the ring. Coordination geometry around each metal is approximately square pyramidal. ESMS spectra were used to characterize the complexes and isotopic distributions were investigated.     

Synthetic and spectroscopic characterization of Rh(I)-( S )-amino acid complexes with diphosphine and triphosphine ligands

Reaction of [Rh(η⁴-cod)(S)-amino-acidato] ((S)-amino acidate?=?(S)-O₂C-CHR-NH₂; cod?=?cycloocta-1,5-diene) with 1,2-bis(diphenylphosphino)ethane (dppe) affords the ionic [Rh(dppe)₂]{(S)-O₂C-CHR-NH₂} (R?=?Me, I; Ph, II) complexes. Reactions with 1,3-bis(diphenylphosphino)propane (dppp) or 2,2,2-tris(diphenylphosphinomethyl)ethane (triphos) give the neutral [Rh(dppp){(S)-O₂C-CHR-NH₂}] (R?=?Me, III; Ph, IV) or [Rh(η²-triphos){(S)-O₂C-CHR-NH₂}] (R?=?Me, V; Ph, VI) complexes. The complexes are characterized by elemental analysis, UV–Vis-, IR-, ¹H/³¹P{¹H} NMR- and mass-spectroscopy. Two molecules of dppe coordinate to the Rh(I) symmetrically by replacing both cod and (S)-amino acidate to give I–II. Only one molecule of dppp (or triphos) coordinate to the Rh(I) asymmetrically by replacing only cod to give III–VI. Two diastereomeric Rh(I)-complexes are present in V and VI. The results further suggest that the ligands are arranged in a distorted square planar geometry around the Rh(I) centre. The use of triphos instead of dppe or dppp yields the same coordination sphere.     

1,3,2-Δ5[sgrave]5-DIAZAPHOSPHOLENES: VERSATILE REACTANTS

Abstract

In an oxidative addition reaction O,O′-bis(trimethylsilyl)diacetyldioxime 2 and triethylphosphite give 1,3,2-Δ⁵[sgrave]⁵-diazaphospholene 3a which hydrolyzes to form (Z)-2,3-bis(hydroxylamino)-2-butene 4. Benzaldehyde and 4 condensate to furnish 1,3-dihydroxy-4,5-dimethyl-2-dimethyl-4-imidazoline 5. Tris(trimethylsilyl)phosphite and 2 react to give the first tris(trimethylsiloxy)phosphorane 3b.     

Synthesis,characterization, and catalytic oxidation of ethylbenzene over host (zeolite-Y)/guest (copper(II) complexes of tetraaza macrocyclic ligands) nanocomposite materials

Cu(II) complexes of 14- and 16-membered tetraaza macrocyclic ligands have been encapsulated in nanopores of zeolite-Y by a two-step process in the liquid phase: (1) adsorption of [bis(diamine)copper(II)] (diamine = 1,2-diaminoethane, 1,3-diaminopropane, 1,2-diaminobenzene, and 1,3-diaminobenzene); [Cu(N–N)₂]²⁺–NaY; in the nanopores of the zeolite-Y and (2) in situ condensation of the copper(II) precursor complex with ethylcinnamate. The new host–guest nanocomposite materials were characterized by chemical analysis and spectroscopic methods. The “neat” and encapsulated complexes exhibit good catalytic activity in the oxidation of ethylbenzene at 333 K, using tert-butyl hydroperoxide as the oxidant. Acetophenone was the major product though small amounts of o- and p-hydroxyacetophenones were also formed revealing that C–H bond activation takes place both at benzylic and aromatic ring carbon atoms.     

CIRCULAR DICHROISM AND ELECTRONIC ABSORPTION OF RHODIUM(III) EDTA-TYPE COMPLEXES: Ethylenediamine-N,N′-diacetato-N,N′-di-3-propionatorhodate(III) and (S,S)-Ethylenediamine-N,N′-disuccinatorhodate(III) Ions

Abstract

Electronic absorption and CD spectra are reported for the sexidentate complexes, trans(O₅)-Rh(EDDDA)^?, trans(O₅ O₆)-Rh(EDDDA)^?, and trans(O₅)-Rh(S,S-EDDS)^? (EDDDA)=ethylenediamine-N,N′-di-3-propionate; S,S-EDDS=(S,S)-ethylenediamine-N,N′-disuccinate). Because of the sterospecific coordination of the S,S-EDDS ligand the absolute configuration of (+)_D-trans(O₅)-Rh(S,S-EDDS)^? is known to be Λ. By comparison of their CD spectra to that of the (+)_D isomer of trans(O₅)-Rh(S,S-EDDS)^?, the absolute configurations of the (?)_DEDDDA complexes are assigned tentatively.     

Synthesis and characterization of a new vic -dioxime 6,7- bis (hydroxyimino)-9,10-diethylidine-5,8,9,10,11,18-hexahydro-5,8,11,18-tetraazadibenzo[a,e]cyclotetradecane-6,7,12,17-tetraone and its nickel and cobalt complexes

A new vic-dioxime 6,7-bis(hydroxyimino)-9,10-diethylidine-5,8,9,10,11,18-hexahydro-5,8,11,18-tetraazadibenzo[a,e]cyclotetradecane-6,7,12,17-tetraone (H₂L) and its hydrogen-bridged tetra- and six-coordinate complexes with Ni(II), Co(II), and Co(III) have been synthesized. The six-coordinate complexes of H₂L have pyridine and chloride as axial ligands. Hydrogen-bridge complexes were converted to their BF₂-bridged analogues by reaction with boron trifluoride etherate. Structures of the H₂L and its complexes were proposed from elemental analysis, ¹H and ¹³C NMR, IR and mass spectra.     

Synthesis and structural characterization of new trinuclear cobalt(II) and nickel(II) complexes possessing five- and six-coordinated geometry

Tri-nuclear cobalt and nickel complexes ([(CoL)₂(OAc)₂Co]?·?THF (I) and [(NiL)₂(OAc)₂(THF)₂Ni]?·?THF (II)) have been synthesized by reaction of a new Salen-type bisoxime chelating ligand of 2,2′-[ethylenedioxybis(nitrilomethylidyne)]dinaphthol(H₂L) with cobalt(II) acetate tetrahydrate or nickel(II) acetate tetrahydrate, respectively. Complexes I and II were characterized by elemental analyses, IR, TG-DTA and ¹H-NMR etc. The X-ray crystal structures of I and II reveal that two acetate ions coordinate to three cobalt or nickel ions through M–O–C–O–M (M?=?Co or Ni) bridges and four μ-naphthoxo oxygen atoms from two [ML] units also coordinate to cobalt(II) or nickel(II). Complex I has two distorted square-pyramidal coordination spheres and an octahedral geometry around Co1. In complex II all three nickel ions are six-coordinate.     

Synthesis,characterization and solid‐phase extraction properties of novel bis(diazo‐azomethine) ligands supported on mesoporous silica

The novel mesoporous silica‐supported bis(diazo‐azomethine) compounds have been synthesized and characterized successively. In the first step, 1,3‐phenylenedimethanamine and 4,4′‐diaminodiphenylmethane were diazotized, and the obtained bis(diazonium) cations were coupled with 2,4‐dihydroxybenzaldehyde. The synthesized bis(diazo‐carbonyl) compounds, 5,5′‐((1,3‐phenylenebis(methylene))bis(diazene‐2,1‐diyl))bis(2,4‐dihydroxybenzaldehyde) (A1) and 5,5′‐((methylenebis(4,1‐phenylene))bis(diazene‐2,1‐diyl))bis(2,4‐dihydroxybenzaldehyde) (A2) were chemically supported on amino‐modified silica‐gel (as L1 and L2). Elemental analysis, liquid chromatography‐mass spectroscopy, liquid‐phase NMR (¹H and ¹³C) and solid‐phase NMR (CP‐MAS ²⁹Si and ¹³C), FT‐IR, TG/DTA, scanning electron microscopy and energy‐dispersive X‐ray spectroscopy techniques were used for characterizations of all the synthesized compounds. The syringe and batch techniques were applied for the solid‐phase extraction properties of Pb(II), Cu(II), Cd(II) and Cr(III) ions using an inductively coupled plasma‐atomic emission spectroscopy instrument. The recoveries of Pb(II), Cu(II), Cd(II) and Cr(III) ions have been achieved to 95–99% with the (RSDs) of ± 2–3% in optimum conditions.     

Synthesis and characterization of tetra-armed-thiosemicarbazone and its salen/salophen capped transition metal complexes: Investigation of their thermal and magnetic properties

In this work, we aimed to synthesize and characterize a novel tetra-directional ligand, (2E,2′E)-2,2′-((((2-(1,3-bis(4-((E)-(2-carbamothioylhydrazono)methyl)phenoxy)propan-2-ylidene)propane-1,3-diyl)bis(oxy))bis(4,1-phenylene))bis(methanylylidene))bis(hydrazinecarbothioamide) (5), including thiosemicarbazone group and its novel tetra-directional-tetra-nuclear Schiff base complexes. For this purpose, we used 1,4-dibromo-2,3-bis(bromomethyl)but-2-ene (2) as starting material. 4,4′-((2-(1,3-Bis(4-formylphenoxy)propan-2-ylidene)propane-1,3-diyl) bis(oxy))dibenzaldehyde (3) was synthesized by the reaction of an equivalent 1,4-dibromo-2,3-bis(bromomethyl)but-2-ene (2) and 4 equivalents of 4-hydroxybenzaldehyde. Then, compound 5 was synthesized in high yield (86%) by a condensation reaction of compound 3 with thiosemicarbazide (4). Finally, four novel tetra-nuclear Cr(III) or Fe(III) complexes of compound 5 were synthesized. The synthesized compounds were characterized using elemental analyses, ¹H NMR, Fourier transform–infrared spectrometry, liquid chromatography–mass spectrometry (ESI⁺), and thermal analyses. The metal ratios of the prepared complexes were determined using an atomic absorption spectrophotometer. We also investigated their effects on the magnetic behaviors of [salen, salophen, Cr(III)/Fe(III)] capped complexes. The complexes were found to be low-spin distorted octahedral Fe(III) and distorted octahedral Cr(III), all bridged by thiosemicarbazone.     

Chemie polyfunktioneller Moleküle, 126 Mitt. Synthese, Struktur und Tautomerie von 5-Fluor-N(1), N(3)-bis(diphenylphosphanyl)-uracil

Summary 5-Fluoro-uracil (1) reacts with chloro-diphenylphosphane to 5-fluoro-N(1), N(3)-bis(diphenylphosphanyl)uracil (3) which was characterized by X-ray crystallography, IR, and mass spectra.¹⁹F,³¹P{¹H},¹³C{¹H}, and¹H NMR spectra indicate that3 rearranges inTHF solution to some extent to the tautomeric 5-fluoro-O(2), O(4)-bis(diphenylphosphanyl)uracil (4). If the solvent contains traces of water, Ph₂P(O)-PPh₂ (6) and uracil derivatives are formed by hydrolysis.

Herrn Professor Dr.Walter Siebert zum 60. Geburtstag gewidmet.     

Synthesis,structure, and photophysical property of series of Ln(III) coordination polymers with different carboxylato ligands (Ln = Sm,Eu)

Four Ln(III) coordination polymers, {[Ln₂(1,3-bdc)₃(H₂O)₄]·DMF·H₂O} _n (Ln = Sm 1, Eu 2) and [Ln₂(mal)₃(H₂O)₆] _n (Ln = Sm 3, Eu 4) (1,3-H₂bdc = isophthalate acid, H₂mal = malonate acid), were hydrothermally synthesized and characterized by single-crystal X-ray diffraction, elemental analysis, IR spectra, UV–Vis–NIR absorption spectra, and fluorescence spectra. The structural analyses reveal that polymer 1 is a 3D coordination polymer. Its asymmetry unit contains two crystallographically independent Sm(III) ions, both are eight-coordinated. The 1,3-bdc^2? anions show three different coordination modes. The structure of polymer 2 is isomorphous with that of 1. Polymer 3 is also a 3D coordination polymer, its asymmetry unit contains one Sm(III) ion, which is nine-coordinate. The mal^2? anions have two different coordination modes. The structure of polymer 4 is isomorphous with that of 3. The luminescent study shows that polymers 1, 2, and 4 exhibit characteristic emission bands in the visible region, corresponding to the transitions of the Ln(III) ions. By comparison and analysis of luminescence, it is found that the incidence of the same ligand on the corresponding spectra of different Ln(III) ions is different, and the influence of different ligands on luminescence of the same Ln(III) ion is also very different.

     

杯[4]芳烃二肟酸-Cu(Ⅰ)配合物的设计与自组装合成

Cu是许多酶中的必须元素[1],Cu与有机配体形成的配合物不仅具有氧化、还原、催化、超分子化合物结构控制等重要作用,而且具有抗菌、抗癌、抗病毒等生物活性.     

Variation in coordinative property of two different N<Subscript>2</Subscript>O<Subscript>2</Subscript> donor Schiff base ligands with nickel(II) and cobalt(III) ions: characterisation and single crystal structure elucidation

A nickel(II) and a cobalt(III) complex of two different potentially tetradentate Schiff bases with different binding modes have been synthesised. The nickel(II) complex [NiL¹] · CH₃OH (1) was formed, on reacting the metal salt with a perfectly symmetrical N₂O₂ tetradentate Schiff base ligand H ₂ L ¹ , which is the 1:2 condensation product of 1,3-diamino propane and 2-hydroxyacetophenone. The cobalt(III) complex [Co(HL²)₃] · (ClO₄)₃ · H₂O (2) was synthesised using an asymmetric N₂O₂ tetradentate Schiff base ligand HL ² on condensing N,N-dimethyl-1,3-diamino propane with o-vanillin in 1:1 mmol ratio. Although both Schiff bases are N₂O₂ functionalised, they showed variation in their coordinative property with nickel(II) and cobalt(III) ions. Both the complexes were characterised by IR spectroscopy and cyclic voltammetry and their single crystal structures clearly indicate that 1 is a mononuclear species whereas 2 is a hydrogen-bonded dimer.     

Synthesis,characterisation and structural aspects of some symmetrical organotellurium halides based on Bis(2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyl)telluride

Bis(2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyl)telluride (2) has been synthesised in good yield by reacting 1-(2-chloroethyl)-3,5-dimethylpyrazole with in situ prepared sodium telluride, Na₂Te in an aqueous solution. A number of new organotellurium halides from bis(2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyl)telluride have been synthesised by using different halogenating reagents. Reaction of 2 with bromine gave bis(2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyl)telluride dibromide (5a) in addition to unexpected product bis(2-(4-bromo-3,5-dimethyl-1H-pyrazol-1-yl)ethyl)telluride dibromide (5b). All compounds were characterized by different spectroscopic techniques viz., ¹H, ¹³C, ¹²⁵Te NMR, Mass spectroscopy, IR and CHN analysis. EDXRF studies have also been employed to confirm the identity of 5a and 5b. Thermal gravimetric analysis of bis(2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyl)telluride (IV) chloride (4) and bis(2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyl)telluride (IV) iodide (5c) reveals the thermal stability of these molecules above 100°C. The X-ray studies of 5c shows trigonal bipyramidal geometry around tellurium atom and intermolecular secondary interaction viz., C-H π stacking between H23A and C22 showing a supramolecular packing between two molecules.