Evaluation of the ONIOM(B3PW91:HF) hybrid method for modeling butyltin chlorides

The ONIOM(B3PW91:HF) hybrid method has been evaluated for the purposes of modeling butyltin chlorides, X_nSnCl_4-n (X = n-butyl, sec-butyl, isobutyl, tert-butyl; n = 1, 2, 3). Three different partitioning schemes of a molecule within ONIOM(B3PW91:HF) were taken into account. For each of these partitioning schemes, conformational analyses of the X_nSnCl_4-n molecules were performed and then several molecular properties of the resulting rotamers were calculated. The values of molecular properties obtained by ONIOM(B3PW91:HF) were compared in a statistical manner with the reference values calculated by B3PW91. A careful choice of partitioning scheme for X_nSnCl_4-n allowed ONIOM(B3PW91:HF) to achieve a significant saving in computational cost, together with a relatively small decrease in the accuracy of the X_nSnCl_4-n molecular properties routinely obtained from conformational analysis (structural parameters, etc.). Unfortunately, the hybrid method turned out to be ineffective in reproducing the ¹H, ¹³C and ¹¹⁹Sn NMR chemical shifts in X_nSnCl_4-n accurately.      

Untersuchungen von nach verschiedenen Verfahren hergestellten Zinnjodiden mit Hilfe des Mössbauer-Effektes

The MÖSSBAUER spectra of various samples of differently prepared Sn^II and Sn^IV iodides have been investigated. — An SnI₂ sample, prepared by dissolving elemental tin in hydroiodic acid, was shown to be strongly contamined with SnI₄; by recrystallisation from ethanol no purification was achieved. However, SnI₂ samples being free from SnI₄ were obtained by precipitation from SnCl₂ solutions by means of HI, KI or NaI. The isomeric shift value of SnI₂ is 3.8 mm/sec. — SnI₄ may be easily prepared from metallic tin and elemental iodine in CHCl₃ or py precipitation from an SnCl₄ solution by means of HI or KI.     

Insertion of SnCl2 into Pt–Cl bonds: synthesis and characterization of four- and five-coordinate trichlorostannylplatinum(II) complexes

Reaction of platinum(IV) chloride with SnCl₂?·?2H₂O in the presence of [NHR₃]₃Cl (R?=?Me, Et) in 3M hydrochloric acid affords the anionic five-coordinate platinum(II) complexes [NHR₃]₃[Pt(SnCl₃)₅], R?=?Me (1), Et (2), respectively. Moreover, platinum(IV) chloride reacts with SnCl₂?·?2H₂O in the presence of bis(triphenylphosphoranylidene)ammonium chloride in acetone/dichloromethane to form [N(PPh₃)₂]₃[Pt(SnCl₃)₅] (3). In contrast, reaction of an acetone solution of platinum(IV) chloride with SnCl₂?·?2H₂O in the presence of bis(triphenylphosphoranylidene) ammonium chloride resulted in the formation of cis-[N(PPh₃)₂]₂[PtCl₂(SnCl₃)₂] (4). The same products are obtained by using a platinum(II) salt as starting material. Similarly, cis and trans- dichlorobis(diethyl sulfide)platinum(II) reacts with SnCl₂?·?2H₂O in 5M hydrochloric acid to give [PtCl(SEt₂)₃]₃[Pt(SnCl₃)₅] (5) by facile insertion of SnCl₂ into the Pt–Cl bond. However, treatment of an acetone solution of cis- and trans-[PtCl₂(SEt₂)₂] with SnCl₂?·?2H₂O in the presence of a small amount of HCl resulted in the formation of 5, which dissociates in solution to give [PtCl₂(SEt₂)₂]. The complexes have been fully characterized by elemental analysis and multinuclear NMR (¹H,?¹³C,?¹⁹⁵Pt,?¹¹⁹Sn) spectroscopy. A structure determination of crystals grown from a solution of 2 by X-ray diffraction methods shows that platinum adopts a regular trigonal bipyramidal geometry.     

VIBRATIONAL SPECTRA AND STRUCTURE OF ALKOXY AND CHLOROALKOXY DERIVATIVES OF ANTIMONY(V)

Abstract

Vibrational spectra of (CH₃O) _n SbCl_5–n . n = 1: 1; n = 2: 2: n = 3: 3: n = 4: 4; n = 5: 5; have been recorded. According to ir and Raman data 1–5 are centrosymmetrical bridged dimers. The Raman spectra of 3–5 exhibit v(Sb–O) doublets of terminal CH₃O at 530–541 and 550–570 cm^?1; vibrations of the 4-membered Sb₂O₂ ring, observed in the 500–517 cm^?1 region of the ir spectra of 1–5, are absent. The v(C–O) bands of bridged and terminal CH₃O are shifted to higher wave numbers (60 and 31 cm^?1, respectively) in the series 1 → 5. The stability of the dimers increases in the series 1 < 2 < 3 < 4 ? 5. At 100–120°C and in CH₃CN solutions dimers of 1–3 dissociate to monomers (v(Sb–O) 537–540 cm^?1, ir data). The monochloride, 4, is partially dissociated in CH₃CN. On solution of the tetrachloride, 1, in benzene a dimer-monomer equilibrium has been observed, with the dimeric form being predominant.     

Allylbutyltin halides (CH2CHCH2)SnBu3−nCln (n = 0, 1, 2, 3). Preparation,carbon-13 NMR characterization and allylstannylation ability towards ketones and aldehydes

Mixed allylbutyltin halides (CH₂CHCH₂)SnBu_3-nCl_n (n = 0–3) have been prepared, and characterized by carbon-13 NMR spectroscopy. Their ability to bring about allylstannylation of ketones and aldehydes, to form organostannoxy compounds, Bu_3-nSnCl_nOC(R′)(R″)CH₂CHCH₂, has been shown to increase on increasing the value of n, that is on increasing the acceptor ability of the tin centre.     

Exploring Electronic Properties of Si20-n H20-n P n Heterofullerenes (N = 1, 2, 5, and 10) Based on NMR and NBO Analysis: A DFT Study

Abstract

Density functional theory (DFT) calculations are performed to characterize Si_20-nH_20-nP_nheterofullerenes (n = 1, 2, 5, and 10), and to examine the stability of encapsulated X@Si_20-nH_20-nP_nwhere X = Li, Na, and K. To this aim, ²⁹Si, ³¹P, and ¹H chemical shielding (CS) tensors as well as natural charges are calculated for the optimized structures. The local structures around silicon as well as phosphorus nuclei are found to show a good correlation with CSs. However, the similar values of ¹H calculated CSs (26–28 ppm) obtained for all the heterofullerenes mean hydrogen atoms do not detect the local structure around the adjacent silicon and also do not distinguish between isomers of heterofullerenes and the number of P dopants. According to calculated endo-hedral inclusion energies (E_inc), formation of the Li@Si_20-nH_20-nP_ncomplexes, unlike the K@Si_20-nH_20-nP_nones, are exothermic while E_incof the Na@Si_20-nH_20-nP_ncomplexes strongly depends on the position and number of P dopants. Moreover, binding energies for the considered models are found to be in the order of Si_20-nH_20-nP_n> Li@Si_20-nH_20-nP_n> Na@Si_20-nH_20-nP_n> K@Si_20-nH_20-nP_nwhile strongly depending on the pattern of P dopants on the surface of the cage.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the following free supplemental files: Additional figures and tables]     

Structural study of C,N‐chelated monoorganotin(IV) halides

Three monoorganotin(IV) compounds of general formula L^CNSnX₃, where L^CN is a 2‐(dimethylaminomethyl)phenyl‐ group and X = Cl ( 1 ), Br ( 2 ) and I ( 3 ), were prepared and characterized using XRD and NMR techniques. Compound 1 reacts with moisture producing [(L^CN)₂HSnCl₂]⁺ [L^CNSnCl₄]^?. Compound 3 decomposes to (L^CN)₂SnI₂, SnI₂ and I₂ when heated. Compound 2 was reacted with NH₄F yielding an equilibrium of fluorine‐containing species. The major products were [L^CNSnF₅]^2? and [(L^CNSnF₃)₂(µ²‐F)₂]^2? (4a). When compound 2 was reacted with another fluorinating agent, L^CN(n‐Bu)₂SnF, an oligomeric product, [L^CNSnF₂(µ²‐F)₂]_n, was observed. Further addition of NH₄F led to subsequent formation of 4a. The structure of fluorinated products was investigated by ¹H, ¹⁹F and ¹¹⁹Sn NMR spectroscopy. Copyright © 2006 John Wiley & Sons, Ltd.     

Polyfluorophenylaminosilane–Titanium (IV) Chloride Adducts

Si(NHC₆H_5-nF_n)₄.xTiCl₄ [n = 2–5; x = 3,4] are obtained from the disproportionation reactions between (CF₃CH₂O)₃SiNHC₆H_5-nF_n (n = 2–5) and TiCl₄ in petroleum ether (40–60°C) at 0°–10°C. These complexes are characterized by elemental analyses and IR, ¹H, and ¹⁹F NMR spectroscopy. Unlike the reported⁵ complex Si(NHC₆H₄F-o)₄.3TiCl₄, these are non-ionic in nature. All complexes give double adducts with CH₃NO₂ and CH₃CN within 24 h.     

THE KINETICS AND MECHANISM OF THE REACTION OF TRICOORDINATE PHOSPHORUS COMPOUNDS WITH SULFENATE ESTERS

Abstract

The kinetics and mechanism of the reaction of tricoordinate phosphorus compounds, Ar_nP(OCH₂CF₃)_3-n with arylsulfenate esters, ArSOCH₂CF₃, are reported. Product analysis, kinetic order, activation parameters, Hammett data and solvent effects are the criteria used to elucidate the two step mechanism involving arylthiophosphoranes as intermediates.     

Tin(IV) and organotin(IV) derivatives of bis(pyrazolyl)acetate: Synthesis, spectroscopic characterization and behaviour in solution.: X-ray single crystal study of bis(pyrazol-1-yl)acetatotri-iodotin(IV) [SnI3(bdmpza)]

Novel heteroscorpionate-containing tin and organotin(IV) complexes, [SnR_nX_3 − n(L)], R = Me, Buⁿ, Ph, or cy; X = Cl, Br or I, n = 0, 1, 2 or 3; L = bis(pyrazol-1-yl)acetate (bpza) or bis(3,5-dimethylpyrazol-1-yl)acetate (bdmpza), have been synthesized and characterized by spectral (IR, ¹H, ¹³C and ¹¹⁹Sn NMR, ^119mSn Mössbauer) and analytical data. In [SnI₃(bdmpza)], the ligand is fac-N,N′,O-tridentate, the three iodine atoms thus also fac about the six-coordinate tin(IV) atom. Neutral bpzaH reacts with BuⁿSnCl₃, PhSnCl₃ and SnCl₄ in Et₂O in the absence of base, yielding 1:1 adducts [XSnCl₃(bpzaH)] (X = R or Cl).     

KINETICS OF FORMATION AND STABILITY CONSTANTS OF MONO AND BIS l-TYROSINE COMPLEXES OF Cu(II), Co(II), AND Ni(II)

Abstract

The kinetics and stability constants of l-tyrosine complexation with copper(II), cobalt(II) and nickel(II) have been studied in aqueous solution at 25° and ionic strength 0.1 M. The reactions are of the type M(HL)^(3-n)+ _n-1 + HL- ? M(HL)^(2-n)+_n(k_n, forward rate constant; k_-n, reverse rate constant); where M=Cu, Co or Ni, HL^? refers to the anionic form of the ligand in which the hydroxyl group is protonated, and n=1 or 2. The stability constants (K_n=k_n/k_-n) of the mono and bis complexes of Cu²⁺, Co²⁺ and Ni²⁺ with l-tyrosine, determined by potentiometric pH titration are: Cu²⁺, log K₁=7.90 ± 0.02, log K₂=7.27 ± 0.03; Co²⁺, log K₁=4.05 ± 0.02, log K₂=3.78 ± 0.04; Ni²⁺, log K₁=5.14 ± 0.02, log K₂=4.41 ± 0.01. Kinetic measurements were made using the temperature-jump relaxation technique. The rate constants are: Cu²⁺, k₁=(1.1 ± 0.1) × 10⁹ M ^?1 sec^?1, k_-1=(14 ± 3) sec^?1, k₂=(3.1 ± 0.6) × 10⁸ M ^?1 sec^?1, k^?2=(16 ± 4) sec^?1; Co²⁺, k₁=(1.3 ± 0.2) × 10⁶ M ^?1 sec^?1, k_-1=(1.1 ± 0.2) × 10² sec^?1, k₂=(1.5 ± 0.2) × 10⁶ M ^?1 sec^?1, k_-2=(2.5 ± 0.6) × 10² sec^?1; Ni²⁺, k₁=(1.4 ± 0.2) × 10⁴ M ^?1 sec^?1, k_-1=(0.10 ± 0.02) sec^?1, k₂=(2.4 ± 0.3) × 10⁴ M ^?1 sec^?1, k_-2=(0.94 ± 0.17) sec^?1. It is concluded that l-tyrosine substitution reactions are normal. The presence of the phenyl hydroxyl group in l-tyrosine has no primary detectable influence on the forward rate constant, while its influence on the reverse rate constant is partially attributed to substituent effects on the basicity of the amine terminus.     

MIXED HALIDE DIALKYL AND ALKYLENEDITHIOPHOSPHATE DERIVATIVES OF RUTHENIUM (III)

Abstract

Mixed chloride dialkyl and alkylenedithiophosphates of ruthenium (III). RuC1_3-n|(S₂P(OR)₂|n (R = Prⁿ, and Ph) and RuCl_3-n,[S₂ POGO]n G =-CMe₂CMe₂,- CH₂CMe₂CH₂-, -CH₂CEt₂CH₂-. and -CMe₂CH₂CHMe-, n = 1,2 have been synthesized for the first time by the reactions of ruthenium trichloride with ammonium dialkyl and alkylenedithiophosphate or alternatively by disproportionation reactions of ruthenium trichloride with ruthenium tris(dialkyl and alkylenedithiophosphates) in different stoichiometric ratios in benzene.

These new complexes have been characterized by elemental analysis, molecular weight determinations, as well as IR and NMR (¹H and ³¹P) data. Chelated structures with bidentate dialkyl and alkylenedithiophosphates groups have been proposed for all these derivatives.     

Die Bildungsenthalpie von SnJ4

The changes of enthalpy for the reactions

1. Sn(c)+2I₂(c)+4165 CS₂(l)=[SnI₄; 4165 CS₂] (sol.),
2. SnI₄(c)+4223 CS₂(l)=[SnI₄; 4223 CS₂] (sol.)

At 298,15 K have been found by solution calorimetry to be ΔH ₁=(?46.7±0.3) and ΔH ₂=(+3.2±0.1) kcal Mol^?1, resp. Neglecting the heat of dilution which is approximately zero these values give ΔH _f ^o (SnI₄; c; 298 K)=9?49.9±0.4) kcal Mol^?1 for the enthalpy of formation of SnI₄. From existing literature data the standard entropy is calculated to beS ^o(SnI₄; c; 298 K)=69,7 cal Mol^?1 K^?1 giving ΔG _f ^o (SnI₄; c; 298 K)=?50,5 kcal Mol^?1 for the corresponding change in theGibbs free energy.     

COMMUNICATION: CATALYSIS OF METHYL ACETATE FORMATION FROM METHANOL ALONE BY (η5-C5H5)(PPh3)2RuX (X = Cl,SnCl3, SnF3): HIGH ACTIVITY FOR THE SnF3 COMPLEX

Abstract

We have recently shown^1,2 that the Ru(II)-Sn(II) bimetallic complex can catalyze the unprecedented one-step formation of acetic acid (or methyl acetate) with methanol used as the sole source. It was suggested that the reaction consists of sequential processes of methanol → formaldehyde (methylal) → methyl formate → acetic acid (methyl acetate). While the Ru(II) complexes capable of catalyzing the dehydrogenation of methanol into methyl formate are known,^3–5 this catalyst system is unique because of its extra ability to isomerize methyl formate to acetic acid without a CO atmosphere (usually high pressure) or an iodide promoter (often corrosive to reaction apparatus).⁶ In this communication, we examine the cyclopentadienyl bis(triphenylphosphine) ruthenium(II) auxilliary in view of its well-defined geometry and configurational stability,⁷ and demonstrate that combination with the SnF₃ ^? ligand⁸ gives quite high catalytic ability compared to the conventional⁹ SnCl₃ ^? ligand.     

The preparation and 119Sn and 19F NMR spectra of some trifluoromethylphenyltin(IV) compounds

The preparation of a series of new trifluoromethylphenyltin(IV) compounds, Bu_nSn(C₆H₄CF₃-3)_4-n, (C₆H₄CF₃-3)SnCl₃, (C₆H₄CF₃-2)SnCl₃, and some related adducts with 2,2¹-bipyridyl and 1,10-phenanthroline, is described. ¹¹⁹Sn and ¹⁹F chemical shifts have been determined, together with values of J(¹¹⁹Sn=F) and ³J(¹¹⁹Sn=H_itortho), and the possibility of a “through space” tinfluorine coupling mechanism is also discussed.     

Synthesis and Characterization of a Novel Phosph(V)azane-Tin(IV) Complex

Abstract

The reaction of bis(anilino)phosphine oxide (C₆H₅NH)₂P(O)H, 1 with Bu₂ ⁿSnCl₂ in the presence of an excess of triethylamine (TEA) in dry tetrahydrofurane (THF) yields the novel N,O-bonded tin complex Bu₂ ⁿSn[NPh(O)P(H)NPh(HNEt₃)]₂, 2. TEA is used as a base to deprotonate the phosphazane ligand and is separated as Et₃NH⁺Cl^?, whereas HTEA⁺ exists in the final product 2 and act as a charge balancing and H-bond structure–directing agent. This new compound has been fully characterized by means of IR, MS, and multinuclear (¹H, ³¹P, and ¹¹⁹Sn NMR) spectroscopy.     

New Dithiocarbamate Compounds from Organotin(IV)

Abstract

A series of new organotin(IV) dithiocarbamate compounds of type R_nSn (S₂CNR′R″)_4-n (n = 2, 3; R = dimethyl, dibutyl, diphenyl, triphenyl and tert-butyl; R′ = methyl, ethyl, benzyl; R″ = isopropyl, ethyl, ethanol) have been successfully synthesized. Elemental analysis showed that the percentage of the elements conformed to the general formula of these compounds. The important peaks of the infrared spectra for the stretching mode ν(C?N), ν(C?S), and v(Sn-S) for the compounds were observed in the area of 1440–1480 cm^?1, 940–1000 cm^?1, and 340–90 cm^?1, respectively. The ¹³C NMR spectra showed the most important peak for N¹³CS₂ chemical shifts were observed in the range 190–210 ppm. X-ray single crystal studies for several structures of these compounds showed that the chelating mode of the dithiocarbamate groups to the central tin atoms were either bidentate or anisobidentate.

GRAPHICAL ABSTRACT     

Effect of collision gas pressure and collision energy on reactions between oxygen and the negative molecular ion of tetrachlorodibenzo-p-dioxins in the collision cell of a triple -quadrupole mass spectrometer

Low-energy reactive collisions between the negative molecular ion of a tetrachlorodibenzo-p-dioxin (TCDD) and oxygen inside the collision cell of a triple-stage quadrupole mass spectrometer produce a substitution ion [M ? Cl + O]^?, a phenoxide ion [C₆H_4-nO₂Cl_n]^?·, [M ? HCl]^?·, and Cl^? by which 1,2,3,4-, 1,2,3,6/1,2,3,7- and 2,3,7,8-TCDD isomers can be distinguished either directly or on the basis of intensity ratios. The collision conditions have an important effect on the relative abundances. Energy- and pressure-resolved curves show that the ions formed by a collisionally activated reaction (CAR) process, i.e. [M ? Cl + O]^? and [C₆H_4-n,O₂Cl_n]^?·, are favoured by a high pressure of oxygen (3-6 mTorr) (1 Torr = 133.3 Pa) and a low collision energy (0.1-7 eV), whereas the ions formed by a collisionally activated dissociation (CAD) process, i.e. [M ? HCl]^?· and Cl^?, are favoured by high pressure and high energy. By choosing a relatively low collision energy (5 eV) and high pressure (4 mTorr), the CAR and CAD ions can be clearly detected.     

Metallkomplexe mit anionischen Liganden von Elementen der 4. Hauptgruppe. XI. Substitutionsreaktionen der Trichlorgermid- und Trichlorstannid-Ionen an Metalltrifluorphosphin-Komplexen

Metal Complexes with Anionic Ligands of Main Group IV Elements. XI. Substitution Reactions of Trichlorogermide and Trichlorostannide Ions with Metaltrifluorophosphine Complexes The photochemical reactions of [SnCl₃]^? in THF with the metal(0)-trifluorophosphine complexes of Ni, Fe, and Mo result in [Ni(PF₃)₃SnCl₃]^?, [Fe(PF₃)₃(SnCl₂]^?, and [Mo(PF₃)₅SnCl₃]^?. [GeCl₃]^?, in substitution reactions not as reactive as [SnCl₃]^?, does react under similar conditions with Fe(NO)₂(PF₃)₂ only, to yield [Fe(NO)₂(PF₃)GeCl₃]^?. With CpMn(PF₃)₃ (Cp = h⁵-C₅H₅) by the intermediatly formed CpMn(PF₃)₂THF both substitution derivatives [CpMn(PF₃)₂ECl₃]^? (E = Ge, Sn) are found. The metallate(0) complexes are isolated as [As(C₆H₅))₄]⁺- and [N(C₂H₅)₄]⁺ -salts; the i.r.- and ¹⁹F-n.m.r.-spectra are reported.     

On the tri-n-octylammonium chlorocomplexes of Sn(IV) in benzene solution

Extracts with tri-n-octylammonium chlorocomplexes of Sn(IV) of various compositions, included the N-deuterated compounds, were prepared and investigated by IR spectroscopy and conductivity measurements. Three Sn(IV) complexes were found: (TOAH⁺)₂SnCl₆^2? (2:1-complex), TOAH⁺SnCl₅^? (1:1-complex) and a complex with the stoichiometric ratio TOA:Sn(IV) > 2. The cation of the latter contains the groups (TOAH…Cl…HTOA)⁺ and TOAH⁺ and that species is supposed to be a 3:1-complex (TOAH…Cl…HTOA)⁺TOAH⁺SnCl₆^2?.