Electrochemical determination of N,N-dimethyl-4-amino-4′-aminoazobenzene

N,N-Dimethyl-4-amino-4′-aminoazobenzene has been determined using differential pulse polarography. Fast-scan modification and linear-scan voltammetry at a hanging mercury drop electrode was used with a detection limit of less than 10⁻⁸ mol liter⁻¹. Differential pulse polarography was then used to analyze mixtures of the above depolarizer with azobenzene and N,N-dimethyl-4-aminoazobenzene, either directly, or after a TLC separation.     

Cyclopalladation of N,N,N′,N′-tetramethylisophthalthioamide

Summary N,N,N,N-Tetramethylisophthalthioamide (Hmpt) was cyclopalladated with PdCl₂ in hot dimethylsulphoxide to give [PdCl(mpt)]. The structure was determined by X-ray analysis. The thioamide is metallated at C(2) to act as an S528-01C528-02S tridentate anionic ligand. There is appreciable steric repulsion between the benzene ring H(4, 6) and the dimethylamino groups. The hydrogens and the methyl groups mutually deviate from the coordination plane in opposite directions. The stability of the fused 5,5-membered chelate ring formed by the S528-03C528-04S ligand seems to overcome the steric hindrance. Derivatives were prepared by replacement of the chloride ion with iodide, diethyldithiocarbamate, 4-tert-butylpyridine, or tri-n-butylphosphine, and characterized spectroscopically. The S528-05C528-06S-fused chelate ring was maintained in these derivatives.     

Synthesis and Crystal Structure of N,N′-4-aminomethyl-pyromellitic diimide

The title compound N,N′-4-aminomethyl-pyromellitic diimide (4-pmpmd) crystallizes in monoclinic, space group P21/c with a = 4.785(1), b = 6.200(1), c = 29.907(2) (A), β =93.583(11)°, V= 885.5(2) (A)3, Dc = 1.494 g/cm3, Z = 2, C22H14N4O4, Mr = 398.37,μ(MoKα) = 0.106mm-1 and F(000) = 412, and its structure was refined to R = 0.0469 and wR = 0.1017 for 1194observed reflections (Fo ＞ 4σ(Fo)). The X-ray diffraction shows the existence of the staggered multi-dimensional supramolecular network based on the Z-mode conformation of the title compound.     

Synthesis and Crystal Structure of N,N′-4-aminomethyl-pyromellitic diimide

1 INTRODUCTION N,N?-4-aminomethyl-pyromellitic diimide (4-pmpmdwas firstly obtained[1] in 1989 as one of the bypro-ducts by refluxing equimolar quantities of pyrome-llitic anhydride, n-hexylamine and 4-aminomethyl py-ridine in dry DMF to assemble electronic donor-spa-cer-acceptor systems, but its structure and coordina-tion chemistry did not receive attention at that time.For 4-pmpmd, the entity of two methylene groups(-CH2-) between the rigid pyromellitic diimide (PMDcore and two fre…     

The step dissociation constants of ethylenediamine-N,N′-diacetic-N,N′-dipropionic and ethylenediamine-N,N,N′,N′-tetrapropionic acids

The step dissociation constants of ethylenediamine-N,N′-diacetic-N,N′-dipropionic and ethylenediamine-N,N,N′,N′-tetrapropionic acids at 298.15 K and ionic strengths of 0.1, 0.5, and 1.0 (KNO₃) were determined potentiometrically. The results were extrapolated to zero ionic strength by the equation with one individual parameter. The thermodynamic constants of dissociation were calculated. The results are compared with the corresponding data on related compounds.     

Synthesis of hydrogels from a polymeric N,N′-diallyl-N,N′-dimethylammonium salt

Feasibility in principle has been demonstrated for obtaining hydrogels with controlled parameters of the three-dimensional network by copolymerization of N,N-methylenebisacrylamine with macromolecules of poly-N,N-diallyl-N,N-dimethylammonium chloride containing terminal double bonds, i.e., with macromonomers of N,N-diallyl-N,N-dimethylammonium chloride. The hydrogels that are obtained have high anion-exchange capacities.A. V. Topchiev Institute of Petrochemical Synthesis, Academy of Sciences of the USSR, Moscow 117912. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 4, pp. 851–854, April, 1992.     

GC-MS determination and optimization of extraction of N,N′-dimethyl-N,N′-diphenylcarbamide from building materials

N,N’-dimethyl-N,N’-diphenylcarbamide (centralite) extracted from building materials was quantitated using ion trap GC-MS detection technique. Both linearity and standard deviation of the calibration curve were dependent on the conditions of the mass spectral detection. The most precise calibration has been achieved by quantification of a mass ion not participating in secondary reactions and which is produced via single fragmentation. The best recovery of centralite was obtained after either 30 min of normal extraction with toluene at 60 °C or 10 min of ultrasonic extraction with chloroform at room temperature. Using the latter method resorption processes might cause decrease in efficiency of the recovery at longer extraction time. Received: 3 July 1998 / Revised: 5 November 1998 / Accepted: 26 January 1999     

Preparation and Characterization of N,N′-Dialkyl-1,3-propanedialdiminium Chlorides,N,N′-Dialkyl-1,3-propanedialdimines,and Lithium N,N′-Dialkyl-1,3-propanedialdiminates

We describe convenient preparations of N,N′-dialkyl-1,3-propanedialdiminium chlorides, N,N′-dialkyl-1,3-propanedialdimines, and lithium N,N′-dialkyl-1,3-propanedialdiminates in which the alkyl groups are methyl, ethyl, isopropyl, or tert-butyl. For the dialdiminium salts, the N₂C₃ backbone is always in the trans-s-trans configuration. Three isomers are present in solution except for the tert-butyl compound, for which only two isomers are present; increasing the steric bulk of the N-alkyl substituents shifts the equilibrium away from the (Z,Z) isomer in favor of the (E,Z), and (E,E) isomers. For the neutral dialdimines, crystal structures show that the methyl and isopropyl compounds adopt the (E,Z) form, whereas the tert-butyl compound is in the (E,E) form. In aprotic solvents all four dialdimines (as well as the lithium dialdiminate salts) adopt cis-s-cis conformations in which there presumably is either an intramolecular hydrogen bond (or a lithium cation) between the two nitrogen atoms.     

New syntheses of N,N′-diaryl-substituted quinone diimines: I. Synthesis of N,N′-bis(4-aminophenyl)-1,4-benzoquinone diimine

Russian Journal of Organic Chemistry - Oxidative condensation of p-phenylenediamine by the action of K2S2O8 in acetic acid afforded N,N′-bis(4-aminophenyl)-1,4-benzoquinone diimine which...     

A calorimetric study of N,N-diethyl-N′-furoylthiourea and N,N-diisobutyl-N′-furoylthiourea

The standard ( p^o =  0.1 MPa) molar enthalpies of combustion in oxygen, at T =  298.15 K, were measured by rotative bomb calorimetry for crystalline N, N -diethyl- N^′-furoylthiourea, (2-C₄H₃O)CONHCSN(C₂H₅)₂, HFET, and N, N -diisobutyl- N^′-furoylthiourea, (2-C₄H₃O)CONHCSN(iso-C₄H₉)₂, HFIB. The standard molar enthalpies of sublimation of both HFET and HFIB were measured by high-temperature Calvet microcalorimetry. These values were used to derive the standard molar enthalpies of formation of the compounds, in their crystalline and gaseous phases.     

Convenient Preparation of N,N′‐Diphenyl‐N,N′‐bis(4‐aminophenyl)‐p‐phenylenediamine

Abstract

This article describes modified conditions to prepare N,N′‐diphenyl‐N,N′‐bis(4‐aminophenyl)‐P‐phenylenediamine in 60% overall yield.     

Thermodynamic characteristics of protolytic equilibria of hexamethylenediamine-N,N,N′,N′-tetraacetic acid

The heats of dissociation of betaine groups of hexamethylenediamine-N,N,N′,N′-tetraacetic acid (H₄L) at 298.15 K and the ionic strengths of 0.1, 0.5, and 1.0 (KNO₃) were determined by direct calorimetry. The standard thermodynamic characteristics of the ptotolytic equilidria of H₄L were calculated using the results from thermochemical and potentiometric measurements made under identical test conditions.     

Mononuclear palladacycles of N,N′-diaryl-2-iminoisoindolines

Reaction of acetato-bridged dinuclear palladacycles, [Pd(iminoisoindoline)(μ-OAc)]₂, with stoichiometric amounts of PR₃ (where R = Ph or Cy) resulted in formation of the corresponding mononuclear phosphine-ligated, six-membered palladacycles with the general formula [Pd(iminoisoindoline)(OAc)PR₃]. The analogous chloride complexes were synthesized by reaction of [Pd(iminoisoindoline)(μ-OAc)]₂ with LiCl in acetone followed by addition of phosphine to afford the monomeric derivatives [Pd(iminoisoindoline)(Cl)PR₃]. Representative crystal structures of both types of mononuclear palladacycles confirmed the mononuclear nature of the complexes and showed a trans-arrangement of the phosphine ligand to the heterocyclic imine-nitrogen of the palladacycles.     

Synthesis and Crystal Structure of Complexes of Lanthanide Picrates With N,N ′-Dimethyl-N,N ′-Diphenyl-1,2-PhenylenediOxydiacetamide

Lanthanide picrate complexes with the ligand N,N'-dimethyl-N,N'-diphenyl-1,2-phenylenedioxydiacetamide (L) [Ln(Pic)₃L] (Ln=La,Gd,Er,Y) have been prepared in nonaqueous medium and characterized by elemental analysis, IR and ¹H spectra. The Gd(III) complex [Gd(Pic)₃L]·3CH₃CN is triclinic, space group P&1macr;, with a=14.292(1), b=14.967(2), c=16.571(2)Å, α=97.855(9), γ=113.070(9)°, ν=28706(6)ų, D _c=1.584g/cm³ for Z=2. The structure was refined to R=0.0318 based on 8409 observed reflections.     

Curing of N,N′-diglycidylimides with polyfunctional compounds

This paper describes the curing reactions of new N,N′-diglycidylimides containing trimellitimide units. Reactions were carried out using several polyfunctional curing agents, viz. aromatic primary diamines and phthalic anhydride. Spectroscopic techniques were used to study the curing process. The course of reaction was followed by i.r. spectroscopy. Some intermediate species were detected by recording ¹³C-NMR spectra until the products became insoluble in the usual deuterated solvents.     

Sensitive Spectrophotometric Determination of Benzoylperoxide with N,N,N′,N′-Tetramethyl-p-phenylenediamine

Abstract

A highly sensitive spectrophotometric determination of benzoylperoxide (BPO) based on the color developing reaction between N,N,N′,N′-tetramethyl-p-phenylenediamine (TMPD) and BPO in the presence of cerium(IV) in weakly acidic media is proposed. The calibration graph is linear in the range 0–6000 ng BPO per 10 ml with an apparent molar absorptivity of 4.73 × 10⁵ 1 mol^?1 cm-1 at 612 nm. The proposed method is about 50-fold more sensitive than N-ethyl-2-naphthylamine (NENA), and application to assays of flour is described.     

Vibrational spectra of N,N-dimethyl/diethylaniline,N,N,N′,N′-tetramethyl/tetraethyl-p-phenylenediamine and N,N,N′,N′-tetramethyl/tetraethylbenzidine derivatives

The ground state and protonated state (quaternized salt) vibrational spectra (200–1800 cm⁻¹) of the title amines are reported for various ring and/or methyl deuterated derivatives. Complete assignments are proposed and compared to those established for the parent hydrocarbons, benzene and biphenyl, and for the parent primary amines, aniline, p-phenylenediamine and benzidine. The electronic distribution, N(n)→ring(π) charge-transfer character and inductive effects are characterized from a vibrational point of view. Finally changes in the vibrational and electronic conformation upon protonation of the nitrogen atom are discussed. These results provide a fundamental basis for the vibrational investigation of excited states and reactive transients of aromatic amines.     

Thermodynamic characteristics of the protolytic equilibria of tetramethylenediamine-N,N,N′,N′-tetraacetic acid

The stepwise dissociation constants of tetramethylenediamine-N,N,N′,N′-tetraacetic acid (H₄L) are determined by means of potentiometry at 298.15 K and ionic strength values of 0.1, 0.5, and 1.0 (KNO₃). The heat effects of the dissociation of the betaine groups of the complexone are measured by direct calorimetry. The standard thermodynamic characteristics of the protolytic equilibria of H₄L are calculated via combined use of the results from thermochemical and potentiometric studies performed under identical experimental conditions. Our results are compared with the corresponding data on relative compounds.