Formation of an oxo-free rhenium(v) complex with 2-aminothiophenol

The reaction of a twofold molar excess of 2-aminothiophenol (H₂L) with trans-[ReOCl₃(PPh₃)₂] in benzene led to the isolation of the oxo-free rhenium(V) complex [ReCl(PPh₃)L₂] (1). IR, ¹H NMR and X-ray crystallographic results indicate that the ligands L coordinate in a dianionic amidothiolate form to the metal and that the complex has the unusual skew-trapezoidal bipyramidal geometry. The ligands L have an average bite angle of 78.8(1)°, with average Re–N and Re–S bond lengths equal to 1.978(5) and 2.297(1)?Å, respectively.     

Synthesis of a re(VI)-catecholato complex by air oxidation of oxorhenium(V)

The complex [Re(ddcat)₃] (H₂ddcat?=?3,5-di-tert-butylcatechol) was prepared by the reaction of either cis-[Re^VO₂I(PPh₃)₂] or (n-Bu₄N)[Re^VOCl₄] with H₂ddcat in toluene in air. X-ray structure determination of the product unequivocally illustrates that the bidentate chelates are in the catecholato rather than the semiquinone form and that the metal has a formal oxidation state of +VI.     

Supramolecular complexes constructed with carboxylate Cu(II) and 2-(2-pyridyl)-benzimidazole via hydrogen bonding

Four copper(II) supramolecular complexes, {[Cu(Hpb)(mal)]·H₂O} _n (1), (Hpb?=?2-(2-pyridyl)-benzimidazole, mal?=?maleate), [Cu₄(pb)₄(cro)₄(MeOH)₂]·2MeOH (2) (cro?=?crotonate), [Cu₂(pb)(Hpb)(mac)₃(MeOH)] (3) (mac?=?α-methacrylate) and [Cu(Hpb)(acr)₂(H₂O)] (4) (acr?=?acrylate), based on carboxylate copper(II)-aromatic ligand systems which are assembled by combination of metal coordination, hydrogen-bond and π–π interactions, have been rationally designed and synthesized. Complex 1 forms a 3D supramolecular network with open channels by extending 2D undulating sheets constructed from 1D helical chains. Complex 2 generates a 2D grid-like sheet via unusual finite-chain tetranuclear molecules, with four copper atoms arranged in a line; the unit does not extend further due to the capping effect of the terminal methanol. Complexes 3 and 4 present a 1D sinusoidal structure and a 3D columnar network with 1D ladder-shaped double chains, respectively. Interestingly, coligand Hpb, deprotonated or/and neutral in different supramolecular complexes, provides hydrogen bonding and π–π stacking interactions. In complexes 2, 3 and 4, carboxylate anions show various bridging modes, which are reflected in their magnetic properties. Weak ferromagnetic coupling (syn-anti µ-OCO) exists in 1, antiferromagnetic (syn-syn µ-OCO) and weak ferromagnetic coupling (µ-O of the??COO group) in 2 and antiferromagnetic coupling (syn-syn µ-OCO) in 3.     

A trigonal-bipyramidal oxorhenium(V) complex with a bidentate nitrogen-donor ligand

The oxorhenium(V) complex [ReO(Hapb)(apb)] (1) (H₂apb =?2-(2-aminophenyl)-1-benzimidazole) was prepared by reaction of trans-[ReO₂(py)₄]Cl with a twofold molar amount of H₂apb. The complex was characterized by spectroscopy and X-ray crystallography. The results show that the rhenium atom lies in a distorted trigonal-bipyramidal environment, with the two imidazole nitrogen atoms in apical positions, and the oxo and two amido nitrogens in the trigonal plane.     

Synthesis of fully protected (2R,3R,4S)-4-amino-7-guanidino-2,3-dihydroxy heptanoic acid

(2R,3R,4S)-4-Amino-7-guanidino-2,3-dihydroxyheptanoic acid (AGDHE), a common constituent of biologically active marine peptides, callipeltin A (1) and neamphamide A, was synthesized as its orthogonally protected derivative from l-glutamic acid in 15 steps. Guanidination by the Mitsunobu condition and osmium-catalyzed dihydroxylation of the corresponding Z-olefin were employed as the key steps.     

Mass spectrometric identification of an azobenzene derivative produced by smectite-catalyzed conversion of 3-amino-4-hydroxyphenylarsonic acid

The compound 3-amino-4-hydroxyphenylarsonic acid (3-amino-HPAA) reacts with smectite to form a soluble azobenzene arsonic acid compound. This reaction is of particular interest because it provides a possible mechanism for the formation of a new type of arsenic compound in natural water systems. 3-Amino-HPAA is a degradation product excreted by chickens that are fed rations amended with roxarsone. Roxarsone is used to control coccidial intestinal parasites in most of the broiler chickens grown in the United States. The structure of the azobenzene arsonic acid compound was first inferred from negative-ion and positive-ion low-resolution mass-spectrometric analyses of the supernatant of the smectite suspension. Elemental composition of the parent ion determined by high-resolution positive-ion mass spectrometric measurements was consistent with the proposed structure of the azobenzene arsonic acid compound.     

Synthesis and photoluminescence of Eu(III) complex compounds containing anions of perfluoro-3-methylbenzoic acid

Photoluminescent Eu(III) compounds with anions of the acid 3-CF₃C₆F₄COOH (LH) of composition Eu(L)₃·2H₂O and Eu(phen)(L)₃ were synthesized. The photoluminescence intensity of the complex Eu(phen)(L)₃ is higher than that of a similar Eu(III) complex containing anions of the acid 4-CF₃C₆F₄COOH as ligands.     

Synthesis of a boronated amino acid as a potential neutron therapy agent: 1-amino-3-[(dihydroxyboryl)ethyl]cyclobutanecarboxylic acid

A novel boronated aminocyclobutanecarboxylic acid was synthesized in 10 steps for potential use in neutron capture therapy. The molecule was modeled after the unnatural amino acid 1-aminocyclobutanecarboxylic acid, which has shown high uptake in brain tumors.     

Solid-phase synthesis of 2-cyanoquinazolin-4(3H)-one and 2,3-dihydrooxazolo[2,3-b]quinazolin-5-one derivatives utilizing resin-bound anthranilic acid derivatives

We were able to obtain 2-cyanoquinazolin-4(3H)-ones 11 in 35-60% four-step overall isolated yields and 2,3-dihydrooxazolo[2,3-b]quinazolin-5-ones 12 in 20-71% four-step overall isolated yields utilizing polymer-bound anthranilic acid derivatives 1, and 6-amino-2-cyanoquinazolin-4(3H)-ones 19 in 30-44% six-step overall isolated yields making use of anthranilic acid derivative resin 2 via dithiazole resins 10 and 17. The reactions on solid phase were monitored by single bead ATR-FTIR spectroscopic method.     

Biologically potent organotin(IV) complexes of 2-maleimidoacetic acid

The in vitro LD₅₀, anti-bacterial, anti-fungal and anti-yeast bio-tests are carried out, which proved them to be powerful biocides. The in vitro anti-tumour and analgesic activities also displayed excellent potential of the title compounds. Series of organotin(IV) complexes are synthesized and characterized. Based on spectroscopic analysis and literature evidences, the compound 1 is tetrahedral and 2 distorted octahedral or trigonal bipyramidal in nature wherein the compounds 3 and 4 are tetrahedral in solid and polymeric trigonal bipyramidal geometry in solution. Beside to ¹H, ¹³C and ¹¹⁹Sn NMR, the FT-IR is successfully applied to verify the bonding mode of endo and exo status of tin(IV) of compound 2.     

Darstellung und Charakterisierung von [N-(2-Mercaptoacetyl)-N′ -4-(penten-3on-2)ethylen-1,2-diaminato]oxorhenium(V), ReO(MRP 40)

Synthesis and Characterization of [N-(2-Mercaptoacetyl)-N′ -4-(penten-3on-2)ethylen-1,2-diaminato]oxorhenium(V), ReO(MRP 40) The title complex is obtained in good yields from the reaction of the triphenylmethyl-protected ligand with (Bu₄N)ReOBr₄ or ReOCl₃(Ph₃P)₂. The structure of the compound as neutral oxorhenium(V) complex is confirmed by analytical, ¹H-, ¹³C-NMR, IR, UV/Vis as well as mass spectrometric studies.     

3-醛基-2-羟基-5-甲基苯甲酸二胺类Schiff碱配体的合成

合成了3-醛基-2-羟基-5-甲基苯甲酸,将其与乙二胺,1,2-丙二胺,1,3-丙二胺反应合成了3种Sch iff碱配体.用元素分析,IR,MS,1H NMR和13C NMR对它们进行了结构表征.     

A new molecular mechanics force field for the design of oxotechnetium(V) and oxorhenium(V) radiopharmaceuticals

Force field parameters for the modeling of oxotechnetium(V) and oxorhenium(V) complexes with amine, amide, imine, carboxylate and thiolate donors have been derived and optimized based on 131 published solid state structures. An automated procedure, based on a simplex algorithm, was used to optimize the 35 sets of metal-dependent structural parameters for each metal ion. These were introduced into the established MOMEC97 force field. The application of the new force field in the prediction of a novel radiopharmaceutical’s structure was successful, the predicted structures of the two isomers compared well with the corresponding crystal structures obtained subsequently (RMS around the metal core: 0.153 and 0.035 Å, respectively).     

Syntheses and characterizations of nine coordination polymers of transition metals with carboxylate anions and bis(imidazole) ligands

Nine new compounds, namely [CuL1(biim-6)] · H₂O (1), [ZnL1(biim-6)] · H₂O (2), [MnL1(biim-6)] · H₂O (3), [MnL1(biim-4)] (4), [Co₂(L2)₂(biim-5)₃ · 6H₂O] · 8H₂O (5), [ZnL3(biim-6)] (6), [ZnL3(biim-5)] (7), [CdL3(biim-5) · 1.5H₂O] · 0.5H₂O (8) and [CdL4(biim-6) · 2H₂O] (9) [where L1 = oxalate anion, L2 = fumarate anion, L3 = phthalate anion, L4 = p-phthalate anion, biim-4 = 1,1′-(1,4-butanediyl)bis(imidazole), biim-5 = 1,1′-(1,5-pentanedidyl)bis(imidazole) and biim-6 = 1,1′-(1,6-hexanedidyl)bis(imidazole)] were successfully synthesized. Compounds 1–3 are isostructural, and display 2D polymeric structures. Compound 4 shows a threefold interpenetrating diamondoid framework. In compound 5, the anions act as counterions, and the metal cations are bridged by bis(imidazole) ligands to form 1D polymeric chains. Compounds 6–9 show 2D polymeric structures. The magnetic properties for 1, 3 and 4 and luminescent properties for 2 and 6–9 are discussed. Thermogravimetric analyses (TGA) for these compounds are also discussed.     

Physico-chemical properties of the first metal compound of di-2-pyridylketone p-nitrophenoxyacetic acid hydrazone (dpknxh), fac-Re(CO)3(κ2-Npy,Npy-dpknxh)Cl

Abstract

Di-2-pyridyl ketone p-nitrophenoxyacetic acid hydrazone (1), obtained from acid-catalyzed condensation of di-2-pyridyl ketone (dpk) with p-nitrophenoxyacetic acid hydrazide, reacts with Re(CO)₅Cl in refluxing toluene to form fac-Re(CO)₃(κ²-N_py,N_py-dpknxh)Cl (2). 1 and 2 were identified from the results of their elemental analyses, spectroscopic and electrochemical properties. X-ray structural analysis on single crystals of 1 and 2 grown from CH₃CN solutions and fac-Re(CO)₃(κ²-N_py,N_py-dpknxh)Cl·DMSO (3) grown from a DMSO solution of 2 confirmed their identities. Spectrophotometric titrations of protophilic solutions of 2 with protophilic solutions of NaBX₄ (X?=?H or F) divulged inter-conversion between the high- and low-energy ILCT transitions of 2 and its solvated complex. Substrates in low concentrations can be detected and determined using protophilic solutions of 2. Electrochemical measurements on 1 and 2 disclosed irreversible redox transformations leading to decomposition of 1 and 2 following the first electron transfer.     

The use of 3,3-bis(2-imidazolyl) propionic acid (bip-OH) as a new chelating ligand for Re(CO)3 and Ru complexes: Formation of organometallic PNA oligomers with (bip)Re(CO)3 and their interaction with complementary DNA

We report the use of 3,3-bis(2-imidazolyl) propionic acid (bip-OH, 1) as a new chelating bis(imidazole) ligand. The synthesis and full characterization of complexes Re(bip-O)(CO)₃2 and [Ru(bpy)₂(bip-OH)]²⁺3 is reported. Both complexes show interesting spectroscopic properties, namely IR for compound 2 and ¹H NMR for 3, respectively. The free carboxylic acid functionality of 1 may be used for the coupling to biomolecules. We have prepared two peptide nucleic acid (PNA) decamers to which the rhenium complex 2 is coupled. All reactions were carried out by solid phase synthesis methods. The Re-PNA oligomer conjugates Re(CO)₃(bip- tgt cta gca a -NH₂) 4 and Re(CO)₃(bip- agg agc aac t-Lys-NH₂) 5 were obtained in good yield and high purity after HPLC purification and identified by their mass spectra. The interaction of 5 with complementary DNA yields a melting temperature of (53.9 ± 1) °C. This is the first DNA melting temperature reported for an organometallic metal-PNA conjugate.     

Synthese und Strukturen von [ReNBr2(Me2PhP)3] und (Me2PhPH)[fac‐Re(NBBr3)Br3(Me2PhP)2]

Syntheses and Structures of [ReNBr₂(Me₂PhP)₃] and (Me₂PhPH)[ fac ‐Re(NBBr₃)Br₃(Me₂PhP)₂] [ReNBr₂(Me₂PhP)₃] ( 1 ) has been prepared by the reaction of [ReNCl₂(Me₂PhP)₃] with Me₃SiBr in dichloromethane. The bromo complex reacts with BBr₃ under formation of [Re(NBBr₃)Br₂(Me₂PhP)₃] ( 2 ) or (Me₂PhPH)[fac‐Re(NBBr₃)Br₃(Me₂PhP)₂] ( 3 ) depending on the experimental conditions. The formation of the nitrido bridge leads to a significant decrease of the structural trans influence of the nitrido ligand which is evident by the shortening of the Re‐(trans)Br bond from 2.795(1) Å in [ReNBr₂(Me₂PhP)₃] to 2.620(1) Å in [fac‐Re(NBBr₃)Br₃(Me₂PhP)₂]^– and 2.598(1) Å in [Re(NBBr₃)Br₂(Me₂PhP)₃], respectively.     

A Novel siloxane-containing dicarboxylic acid, 1,3-bis(p-carboxyphenylene-ester-methylene)tetramethyldisiloxane,and its derivatives: ester macrocycle and supramolecular structure with a copper complex

The new dicarboxylic acid, 1,3-bis(p-carboxyphenylene-ester-methylene)tetramethyldisiloxane (H₂L, 1) was obtained by treating 1,3-bis(chloromethyl)-1,1,3,3-tetramethyldisiloxane with a mixture of terephthalic acid and terephthalic acid sodium salt in a 1:1 ratio. In this approach, besides the desired compound 1 (33 wt % yield), the condensation cyclic dimer 2 (7 wt % yield) and an oligomer 3 (10 wt % yield) resulted. The reaction between dicarboxylic acid H₂L, where L is the carboxylate ligand, along with imidazole as co-ligand, and copper hydroxide resulted in the formation of a coordination compound [Cu(HIm)₄(H₂O)₂]L·4.5H₂O (4). Single-crystal X-ray crystallography has revealed that the crystal structure of 4 is a self-assembled H-bonded three-dimensional supramolecular structure. FTIR and NMR spectral techniques were also used to characterize the formed structures. Optical and thermal properties of all compounds were studied. The stability of the supramolecular structure in solution (methanol) and with temperature was studied using ATR-FTIR. The ability of the macrocycle 2 to bind potassium cations in solution was investigated by UV–vis spectrophotometry.