Synthesis and spectral studies of macrocyclic Cu(II) complexes by reaction of various diamines,copper(II) perchlorate and 1,4-bis(2-carboxyaldehyde phenoxy)butane

Six macrocyclic complexes, were synthesized by reaction of 1,4-bis(2-carboxyaldehyde phenoxy)butane and various amines and their copper(II) perchlorate complexes were synthesized by template effect reaction of 1,4-bis(2-carboxyaldehyde phenoxy)butane, Cu(ClO₄)₂?·?6H₂O and amines. The metal-to-ligand ratios were found to be 1?:?1. Cu(II) metal complexes are 1?:?2 electrolytes as shown by their molar conductivities (Λ_M) in DMF (dimethyl formamide) at 10^?3?M. The Cu(II) complexes are proposed to be square planar based on elemental analysis, FT–IR, UV–Vis, magnetic susceptibility measurements, molar conductivity measurements, and mass spectra.     

Preparation and characterization of binuclear CuII complexes derived from diamines and dialdehydes

New macrocyclic complexes were synthesized by template reaction of 1,7-bis(2-formylphenyl)-1,4,7-trioxaheptane, 1,4-bis(2-carboxyaldehydephenoxy)butane or 1,3-bis(2-carboxyaldehydephenoxy)propane with 1,4-bis(2-aminophenoxy)butane, 1,3-bis(2-aminophenoxy)butane, 1,4-bis(4-chloro-2-aminophenoxy)butane or 1,3-bis(4-chloro-2-aminophenoxy)butane and Cu(NO₃)₂ ·?3H₂O or Cu(ClO₄)₂ ·?6H₂O, respectively. The complexes have been characterized by elemental analysis, IR, ¹H and ¹³C NMR, UV–Vis spectra, magnetic susceptibility, conductivity measurements and mass spectra. All complexes are diamagnetic and binuclear.     

Synthesis and characterization of new macrocyclic Schiff base derived from 2,6-diaminopyridine and 1,7-bis(2-formylphenyl)-1,4,7-trioxaheptane and its Cu(II), Ni(II), Pb(II), Co(III) and La(III) complexes

A new macrocyclic ligand, 1,3,5-triaza-2,4:7,8:16,17-tribenzo-9,12,15-trioxacyclooktadeca-1,5-dien (L) was synthesized by reaction of 2,6-diaminopyridine and 1,7-bis(2-formylphenyl)-1,4,7-trioxaheptane. Then, its Cu(II), Ni(II), Pb(II), Co(III) and La(III) complexes were synthesized by template effect by reaction of 2,6-diaminopyridine and 1,7-bis(2-formylphenyl)-1,4,7-trioxaheptane and Cu(NO₃)₂ · 3H₂O, Ni(NO₃)₂ · 6H₂O, Pb(NO₃)₂, Co(NO₃)₂ · 6H₂O, La(NO₃)₃ · 6H₂O, respectively. The ligand and its metal complexes have been characterized by elemental analysis, IR, ¹H and ¹³C NMR, UV–Vis spectra, magnetic susceptibility, thermal gravimetric analysis, conductivity measurements, mass spectra and cyclic voltammetry. All complexes are diamagnetic and Cu(II) complex is binuclear. The Co(II) was oxidized to Co(III). The comparative electrochemical studies show that the nickel complex exhibited a quasi-reversible one-electron reduction process while copper and cobalt complexes gave irreversible reduction processes in DMSO solution.     

Thermal, spectral and magnetic characterization of Co(II), Ni(II) AND Cu(II) 4-chloro-2-nitrobenzoates

Physico-chemical properties of 4-chloro-2-nitrobenzoates of Co(II), Ni(II), and Cu(II) were studied. The complexes were obtained as mono- and trihydrates with a metal ion to ligand ratio of 1:2. All analysed 4-chloro-2-nitrobenzoates are polycrystalline compounds with colours depending on the central ions: pink for Co(II), green for Ni(II), and blue for Cu(II) complexes. Their thermal decomposition was studied only in the range of 293–523 K, because it was found that on heating in air above 523 K 4-chloro-2-nitrobenzoates decompose explosively. Hydrated complexes lose crystallization water molecules in one step and anhydrous compounds are formed. The final products of their decomposition are the oxides of the respective transition metals. From the results it appears that during dehydration process no transformation of nitro group to nitrite takes place. The solubilities of analysed complexes in water at 293 K are of the order of 10^–4–10^–2 mol dm^–3. The magnetic moment values of Co²⁺, Ni²⁺ and Cu²⁺ ions in 4-chloro-2-nitrobenzoates experimentally determined at 76–303 K change from 3.89 to 4.82 μ_B for Co(II) complex, from 2.25 to 2.98 μ_B for Ni(II) 4-chloro-2-nitrobenzoate, and from 0.27 to 1.44 μ_B for Cu(II) complex. 4-chloro-2-nitrobenzoates of Co(II), and Ni(II) follow the Curie–Weiss law. Complex of Cu(II) forms dimer.     

Spectral and thermal studies of new Co(II) and Ni(II) hexaaza and octaaza macrocyclic complexes

The macrocyclic complexes of Co(II) and Ni(II) having chloride or thiocyanate ions in the axial position have been synthesized and characterized. These complexes are synthesised by the template condensation of o-phenylenediamine or 2,3-butanedionedihydrazone with the appropriate aldehydes in NH₄OH solution in the presence of the metal ions, Co(II) and Ni(II). The complexes were characterized by spectroscopic methods (IR, UV-Vis and ESR) and magnetic measurements as well as thermal analysis (TG and DTA). The results obtained are commensurate with the proposed formulae. Spectral studies indicate that these complexes have an octahedral structure. From conductivity measurements the complexes are non-electrolytes. The kinetic of the thermal decomposition of the complexes was studied and the thermodynamic parameters are reported.     

Synthesis and spectroscopic characterization of a new macrocyclic Schiff base formed by the reaction of 1,5- bis (2-formylphenyl)pentane and 2,6-diaminopyridine,and a study of its metal complexes

A new dialdehyde 1,5-bis(2-formylphenyl)pentane was synthesized from 1,5-dibromopentane with salicylaldehyde and K₂CO₃; macrocyclic ligand was synthesized by reaction of 2,6-diaminopyridine and 1,5-bis(2-formylphenyl)pentane. Cu(II), Ni(II), Pb(II), Zn(II), Cd(II) and La(III) complexes were synthesized by reaction of the ligand and Cu(ClO₄)₂ · 6H₂O, Ni(ClO₄)₂ · 6H₂O, Pb(ClO₄)₂ · 6H₂O, Zn(ClO₄)₂ · 6H₂O, Cd(ClO₄)₂ · 6H₂O and La(ClO₄)₃ · 6H₂O, respectively. The ligand and its metal complexes have been characterized by elemental analysis, IR, ¹H and ¹³C NMR, UV–Vis spectra, magnetic susceptibility, conductivity measurements and mass spectra. All complexes are diamagnetic and Cu(II) complex is binuclear.     

Synthesis and characterization of potassium 1,3-bis(N-methylpiperazino)propan-2-O-xanthate and the complexes of Co(II), Ni(II) and Cu(I) ions

Potassium 1,3-bis(N-methyl piperazino)propan-2-O-xanthate (LK), and its complexes with Co(II), Ni(II) and Cu(I) ions have been prepared and characterized as [CoL₂(H₂O)₂], [NiL₂(H₂O)₂]·2H₂O and CuL·2H₂O by FT-IR, ¹H and ¹³C?NMR spectroscopies, elemental analyses, magnetic susceptibility and TGA techniques.     

Synthesis,characterization and antimicrobial activity of pentagonal-bipyramidal isothiocyanato Co(II) and Ni(II) complexes with 2,6-diacetylpyridine bis(trimethylammoniumacetohydrazone)

Pentagonal-bipyramidal isothiocyanato Co(II) and Ni(II) complexes with condensation product of 2,6-diacetylpyridine and trimethylammoniumacetohydrazide (Girard’s T reagent) were synthesized and characterized by elemental analyses, IR and UV–vis spectra, molar conductivity, and magnetic susceptibility. Crystal structures of the Co(II) and Ni(II) complexes were also determined. Antimicrobial activities of the ligand and metal complexes were examined.     

Spectroscopic evaluation of Co(II), Ni(II) and Cu(II) complexes derived from thiosemicarbazone and semicarbazone

Co(II), Ni(II) and Cu(II) complexes were synthesized with thiosemicarbazone (L(1)) and semicarbazone (L(2)) derived from 2-acetyl furan. These complexes were characterized by elemental analysis, molar conductance, magnetic moment, mass, IR, electronic and EPR spectral studies. The molar conductance measurement of the complexes in DMSO corresponds to non-electrolytic nature. All the complexes are of high-spin type. On the basis of different spectral studies six coordinated geometry may be assigned for all the complexes except Co(L)(2)(SO(4)) and Cu(L)(2)(SO(4)) [where L=L(1) and L(2)] which are of five coordinated square pyramidal geometry.     

Synthesis and crystal structure of some new cadmium (II) macrocyclic Schiff-base complexes containing piperazine moiety

The metal templated Cd(II) cyclocondensation of 2,6-diacetylpiridine or 2,6-pyridinedicarbaldehyde and two different amines containing piperazine moieties have been investigated. The resulting ligands, L¹ and L² are 16- and L³ and L⁴ 17-membered pentaaza macrocycles. The complexes have been characterized by a variety of methods including IR, ¹H, ¹³C NMR, DEPT, COSY(H,H), HMQC(H,C), FAB spectrometry and conductivimetry measurements. The crystal structures of [CdL²Cl](CH₃OH)ClO₄ (2) and [CdL⁴(NO₃)(H₂O)]ClO₄ (4) have been also determined, and it was shown that the geometry of the Cd(II) ion in the complexes is slightly distorted pentagonal pyramidal and pentagonal bipyramidal, respectively. The gas-phase structures of ligands, L² and L⁴ and their Cd(II) complexes have also theoretically studied.     

Synthesis and characterization of a new pyrrolidine containing sulfur ligand and the transition metal complexes of Co(II), Ni(II) and Cu(I)

Potassium 1,3-dipyrrolidinopropan-2-O-xanthate (LK), and its complexes with Co(II), Ni(II) and Cu(I) have been prepared and characterized as [CoL₂(H₂O)₂]?·?2H₂O, [NiL₂(H₂O)₂] and CuL?·?2H₂O by FT-IR, ¹H and ¹³C NMR spectroscopies, elemental analyses, magnetic susceptibility and TGA techniques.     

Synthesis and structural studies of Co(II), Ni(II) and Cd(II) complexes with 2-acetylpyridine

Three new mononuclear complexes [Co(2-Acpy)₂(H₂O)₂](NO₃)₂ (1), [Ni(2-Acpy)₂(H₂O)₂](NO₃)₂ (2) and [Cd(2-Acpy)₂(NO₃)₂] (3) (2-Acpy = 2-acetylpyridine) have been synthesized and characterized by elemental analysis, IR and UV–Vis spectroscopy. The structures of 1 and 3 were accomplished by single crystal X-ray diffraction. Crystallographic investigation of 1 reveals monomeric, dicationic units in which the cobalt(II) ion is six-coordinate. The coordination sphere is formed by two N, O bidentate acetylpyridine ligands and two water molecules. The crystal structure of 3 consists of monomeric units in which the cadmium is eight-coordinate. Both the organic ligand and nitrate groups are bidentate chelators. The supramolecular solid-state architecture is sustained by π–π interactions.     

Synthesis and characterization of new poly(amide–imide)s from 1,4-bis(4-trimellitimidophenoxy)-2-tert-butylbenzene with various diamines

New poly(amide–imide)s were prepared from a diimide–dicarboxylic acid, 1,4-bis(4-trimellitimidophenoxy)-2-tert-butylbenzene ( BTTB ), with various diamines by the direct polycondensation in N-methyl-2-pyrrolidinone (NMP) using triphenyl phosphite and pyridine as condensing agents. The new diimide–dicarboxylic acid BTTB containing an ether linkage and tert-butyl substituent was synthesized by the condensation reaction of 1,4-bis(4-aminophenoxy)-2-tert-butylbenzene with trimellitic anhydride. All the polymers were obtained in quantitative yields with inherent viscosities of 0.62–1.06 dL g⁻¹. The polymers were amorphous, and most of them were readily soluble in aprotic polar solvents such as NMP, N,N-dimethylacetamide (DMAc), and N,N-dimethylformamide (DMF), as well as in less polar solvents such as dimethyl sulfoxide (DMSO), m-cresol, pyridine, and γ-butyrolactone, and also even in tetrahydrofuran. The glass transition temperatures of the polymers were determined by DSC method, and they were in the range of 238–279°C. These polymers were stable up to 408–449°C in air and 451–483°C in nitrogen and lose 10% weight in the range of 479–525°C in air and 480–528°C in nitrogen atmosphere. The polymer films had a tensile strength range of 71–115 MPa, an elongation at break range of 4–14%, and a tensile modulus range of 2.3–3.1 GPa. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2301–2307, 1998     

Synthesis and characterization of Co(II), Ni(II), Zn(II) and Cu(II) complexes with a new tetraazamacrocyclic Schiff base ligand containing a piperazine moiety: X-ray crystal structure determination of the Co(II) complex

Two macrocyclic Schiff base ligands, L¹ [1+1] and L² [2+2], have been obtained in a one-pot cyclocondensation of 1,4-bis(2-formylphenyl)piperazine and 1,3-diaminopropane. Unfortunately, because of the low solubility of both ligands, their separation was unsuccessful. In the direct reaction of these mixed ligands (L¹ and L²) and the appropriate metal ions only [CoL¹(NO₃)]ClO₄, [NiL¹](ClO₄)₂, [CuL¹](ClO₄)₂ and [ZnL¹(NO₃)]ClO₄ complexes have been isolated. All the complexes were characterized by elemental analyses, IR, FAB-MS, conductivity measurements and in the case of the [ZnL¹(NO₃)]ClO₄ complex with NMR spectroscopy.     

Synthesis,characterization, and biological properties of Ni(II), Co(II), and Cu(II) complexes of Schiff bases derived from 4-aminobenzylamine

New Schiff bases, N,N′-bis(salicylidene)-4-aminobenzylamine (H₂L¹), N,N′-bis(3-methoxysalicylidene)-4-aminobenzylamine (H₂L²), and N,N′-bis(4-hydroxysalicylidene)-4-aminobenzylamine (H₂L³), with their nickel(II), cobalt(II), and copper(II) complexes have been synthesized and characterized by elemental analyses, electronic absorption, FT-IR, magnetic susceptibility, and conductance measurements. For the ligands, ¹H and ¹³C NMR and mass spectra were obtained. The tetradentate ligands coordinate to the metal ions through the phenolic oxygen and azomethine nitrogens. The keto-enol tautomeric forms of the Schiff bases H₂L¹, H₂L², and H₂L³ have been investigated in polar and apolar solvents. All compounds were non-electrolytes in DMSO (～10^?3 M) according to the conductance measurements. Antimicrobial activities of the Schiff bases and their complexes have been tested against Acinobacter baumannii, Pseudomonas aeruginosa, Micrococcus luteus, Bacillus megaterium, Corynebacterium xerosis, Staphylococcus aureus, Escherichia coli, Candida albicans, Rhodotorula rubra, and Kluyveromyces marxianus by the disc diffusion method; biological activity increases on complexation.     

Preparation and characterization of Mg(II)-, Ca(II) and Cd(II) complexes of 1,2-ethanediol and water

Mixed ligand complexes of different compositions were prepared with water, sulfate ion and 1,2-ethanediol as ligand. IR spectra and the thermoanalytical curves of the complexes were recorded. Oxygen atoms bound by one or two coordinate bonds to the metal ion, or by hydrogen-bonds in the crystal, were observed. As for the water molecule, 1,2-ethanediol molecules of crystal and monohydrate type were found, depending on the type of binding of the oxygen atoms.This revised version was published online in November 2005 with corrections to the Cover Date.     

Nickel(II) and zinc(II) complexes with N-(5,6-dihydro-4H-1,3-thiazin-2-yl)-2-aminobenzimidazole (BzTz): Synthesis,spectral and structural characterization

The reaction of nickel and zinc chlorides and nitrates with the ligand N-(5,6-dihydro-4H-1,3-thiazin-2-yl)-2-aminobenzimidazole (BzTz) leads to the formation of the new complexes: [NiCl₂(BzTz)₂] (1), [Ni(NO₃)(BzTz)₂(H₂O)₃](NO₃) (2), [ZnCl₂(BzTz)₂] (3) and [Zn(NO₃)₂(BzTz)₂] (4). They have been characterized by spectroscopic methods (electronic, infrared and NMR) and magnetic susceptibility measurements. Additionally, the crystal structures of the complexes 1 and 3 have been determined by X-ray single-crystal diffraction. The ligand exhibits the N-benzimidazole coordination mode on interacting with the metal centers. The X-ray structure of the complexes 1 and 3 reveals a distorted tetrahedral coordination geometry around the metal center, with the metallic atoms coordinated to two chlorine atoms and two benzimidazole nitrogen atoms. These two complexes are isostructural, crystallizing in the monoclinic system and Cc space group. In complex 2 the geometry around the nickel atom could be described as a distorted octahedron whereas in case of complex 4 the zinc atom is in a distorted tetrahedral environment.     

A seven membered chelate ring complex of Mn(II) derived from bis(5-phenyl-2H-1,2,4-triazole)-3-yl-disulfane and cleavage of the S-S bond in a Co(II) complex: Synthesis, spectral and structural characterization

The reaction of Mn(OAc)₂·4H₂O with bis(5-phenyl-2H-1,2,4-triazole)-3-yl-disulfane (H₂ptds·2H₂O) (1) yielded new complex [Mn(ptds)(o-phen)₂] (2). It is observed that under similar conditions the reaction of Co(OAc)₂ with H₂ptds·2H₂O (1) leads to thermolysis of the S-S bond of the disulfane to yield [Co(pts)(o-phen)₂]·H₂O·0.5C₂H₅OH, with the newly generated organic ligand 5-phenyl-2H-1,2,4-triazole-3-sulfinate, (pts)²⁻. The ligand H₂ptds·2H₂O (1), [Mn(ptds)(o-phen)₂] (2) and [Co(pts)(o-phen)₂]·H₂O·0.5C₂H₅OH (3) crystallized into monoclinic, trigonal and triclinic crystal systems, respectively. The triazole ring nitrogen of the bidentate ligand chelates the Mn(II) center forming a seven membered chelate ring, while N, O donor sites of the resulting triazole sulfinate bond Co(II) to form a five membered chelate. The resulting complexes are paramagnetic and have a distorted octahedral geometry.     

Structures of o-hydroxy Schiff-base copper(II) complexes derived from p-benzylamines

Nine copper(II) complexes of o-hydroxy Schiff bases derived from benzylamine, p-methoxybenzylamine, p-nitrobenzylamine, salicylaldehyde, 2-hydroxy-1-naphthalenecarboxaldehyde, and 3-hydroxy-2-naphthalenecarboxaldehyde were synthesized and characterized by chemical analysis, mass spectrometry, UV-Vis, infrared and electron paramagnetic resonance (EPR) spectroscopy, and seven X-ray crystal structures. The X-ray diffraction studies of these compounds showed that the geometry around the copper is square planar in six of the seven complexes. EPR studies of all the complexes in DMF solution at 77 K suggest that their geometries in solution are square planar as well.     

The synthesis and characterization of three new vic -dioximes and their nickel(II), copper(II) and cobalt(II) complexes

Three new vic-dioximes, [L¹H₂], N-(4-ethylphenyl)amino-1-acetyl-1-cyclohexenylglyoxime, [L²H₂], N-(4-butylphenyl)amino-1-acetyl-1-cyclohexenylglyoxime, and [L³H₂], N-(4-methoxyphenyl)amino-1-acetyl-1-cyclohexenylglyoxime were synthesized from 1-acetyl-1-cyclohexeneglyoxime and the corresponding substituted aromatic amines. Metal complexes of these ligands were also synthesized with Ni(II), Cu(II), and Co(II) salts. These new compounds (ligands and complexes) were characterized with FT–IR, magnetic susceptibility measurement, molar conductivity measurements, mass spectrometry measurements, thermal methods (e.g. thermal gravimetric analysis), ¹H NMR (Nuclear Magnetic Resonance) and ¹³C NMR spectral data and elemental analyses.