Effect of temperature on the protonation of N-(2-hydroxyethyl)ethylenediamine-N,N′,N′-triacetic acid in aqueous solutions: Potentiometric and calorimetric studies

The TALSPEAK process (Trivalent Actinide Lanthanide Separations by Phosphorus-reagent Extraction from Aqueous Komplexes) has been demonstrated in several pilot-scale operations to be effective at separating trivalent actinides (An³⁺) from trivalent lanthanides (Ln³⁺). However, fundamental studies have revealed undesired aspects of TALSPEAK, such as the significant partitioning of Na⁺, lactic acid, and water into the organic phase, thermodynamically unpredictable pH dependence, and the slow extraction kinetics. In the modified TALSPEAK process, the combination of the aqueous holdback complexant HEDTA (N-(2-hydroxyethyl)ethylenediamine-N,N′,N′-triacetic acid) with the extractant HEH[EHP] (2-ethyl(hexyl) phosphonic acid mono-2-ethylhexyl ester) in the organic phase has been found to exhibit a nearly flat pH dependence between 2.5 and 4.5 and more rapid phase transfer kinetics for the heavier lanthanides. To help understand the speciation of Ln³⁺ and An³⁺ in the modified TALSPEAK, systematic studies are underway on the thermodynamics of major reactions in the HEDTA system under conditions relevant to the process (e.g., higher temperatures). Thermodynamics of the protonation and complexation of HEDTA with Ln³⁺ were studied at variable temperatures. Equilibrium constants and enthalpies were determined by a combination of techniques including potentiometry and calorimetry. This paper presents the protonation constants of HEDTA at T = (25 to 70) °C. The potentiometric titrations have demonstrated that, stepwise, the first two protonation constants decrease and the third one slightly increases with the increase of temperature. This trend is in good agreement with the enthalpy of protonation directly determined by calorimetry. The results of NMR analysis further confirm that the first two protonation reactions occur on the diamine nitrogen atoms, while the third protonation reaction occurs on the oxygen of a carboxylate group. These data, in conjunction with the thermodynamic parameters of Ln³⁺/An³⁺ complexes with HEDTA at different temperatures, will help to predict the speciation and temperature-dependent behavior of Ln³⁺/An³⁺ in the modified TALSPEAK process.     

Acid Dissociation Constants and Rare Earth Stability Constants for DTPA

Diethylenetriamine-N,N,N′,N″,N″-pentaacetic acid (DTPA) is an octadentate aminopolycarboxylate complexing agent whose f-element complexes find important practical applications in nuclear medicine and in advanced nuclear fuel reprocessing. This investigation focuses primarily on the latter application, specifically on characterization of lanthanide–DTPA complexes of relevance to the Trivalent Actinide–Lanthanide Separations by Phosphorus reagent Extraction and Aqueous Komplexants (TALSPEAK) process. To function acceptably, the TALSPEAK process requires the presence of moderate concentrations (0.5–2.0 mol·L^?1) of a (Na⁺/H⁺) lactate (or citrate) buffer. Competition between DTPA, lactate, and the extractant bis(2-ethylhexyl)phosphoric acid (HDEHP) for the lanthanides and trivalent actinides governs the course of the extraction process. To facilitate modeling and to support process improvements, the acid dissociation constants and stability constants for rare earth complexes with DTPA have been determined in 2.0 mol·L^?1 ionic strength (NaClO₄) media. The acid dissociation constants for DTPA and the stability constant for [Eu(DTPA)]^2? also were determined in sodium trifluoromethanesulfonate at 2.0 mol·L^?1 ionic strength to evaluate the potential impact of changing the nature of the electrolyte. The thermodynamic data are compared with earlier reports of similar data at lower ionic strength and used to complete calculations exploring the relative stability of lanthanide–DTPA and lactate complexes under TALSPEAK extraction conditions. Lanthanide–DTPA stability trends are discussed in comparison with literature data on a variety of other metal ions.     

Application of Polymer‐Modified Hanging Mercury Drop Electrode in the Indirect Determination of Certain β‐Lactam Antibiotics by Differential Pulse,Ion‐Exchange Voltammetry

A selective and sensitive polymer‐modified electrode was developed for β‐lactam antibiotics (cefaclor, amoxycillin and ampicillin) present in formulated and blood plasma samples for the quantitative analysis in aqueous environment. The detection was made using an ion‐exchange voltammetric technique, in differential pulse mode, on poly(N‐chloranil N,N,N′,N′‐tetramethylethylene diammonium dichloride)‐modified hanging mercury drop electrode of a three‐electrode system (PAR Model 303A) attached with a Polarographic Analyzer/Stripping Voltammeter (PAR Model 264A). Antibiotics, which are electroinactive compounds, were essentially converted to their electroactive oxazolone analogues through acid treatment under drastic conditions (0.1 mol L^?1 HCl, ～85 °C, 2 h). These analytes in the form of their respective oxazolones were indirectly analyzed by oxazolone entrapment in the polymeric film through ion‐exchange process at modified electrode surface (accumulation potential ?0.20 V (vs. Ag/AgCl), accumulation time 120 s, pH 7.4, KH₂PO₄‐NaOH buffer (ionic strength 0.1 mol L^?1), scan rate 10 mV s^?1, pulse amplitude 25 mV). The limit of detection of cefaclor‐derived oxazolone was found to be 2.12 nmol L^?1 (0.82 ppb, S/N 3, RSD 3.21%) in terms of cefaclor (a representative β‐lactam) concentration.     

Synthesis of statistical glycidyl methacrylate‐n‐vinyl pyrrolidone copolymers and their reaction with naproxen

Free‐radical copolymerization of glycidyl methacrylate (GMA) with N‐vinylpyrrolidone (VPD) was carried out at 50 °C using 3.0 mol · L^?1 of N,N′‐dimethylformamide solution and 9.0 · 10^?3 mol · L^?1 of 2,2′‐azobisisobutyronitrile as an initiator. The modification reaction of GMA‐VPD copolymers with a model bioactive carboxylic acid, 6‐methoxy‐α‐methyl‐2‐naphthaleneacetic acid (naproxen), was studied in the homogeneous phase using basic catalysts. The influence of the type of catalyst and the GMA content was evaluated. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1192–1199, 2002     

Determination of total antimony(III,V) by square-wave anodic stripping voltammetry with in situ plated bismuth-film electrode

A sensitive and reliable method is described for the determination of total Sb(III,?V) at traces levels by Osteryoung square-wave anodic stripping voltammery (OSWASV). This method is based on the co-deposition of Sb(III,?V) with Bi(III) onto an edge-plane pyrolytic graphite substrate at an accumulation step. OSWASV studies indicated that the co-deposited antimony was oxidised with anodic scans to give an enhanced anodic peak at about 450?mV vs. Ag/AgCl (sat. KCl). The anodic stripping peak current was directly proportional to the total concentration of antimony in the ranges of 0.01–0.10?µg?L^?1, 0.10–1.0?µg?L^?1 and 1.0–18.0?µg?L^?1 with correlation coefficient higher than 0.995 when 2.0?mol?L^?1 hydrochloric acid was used. The detection limits calculated as S/N?=?3 was 5.0?ng?L^?1 in 2.0?mol?L^?1 hydrochloric acid at 180?s deposition time. The relative standard deviation was 5% (n?=?6) at 0.10?µg?L^?1 level of antimony. The analytical results demonstrate that the proposed method is applicable to analyses of real water samples.     

Determination of three Tumor Biomarkers (Homovanillic Acid,Vanillylmandelic Acid,and 5‐Hydroxyindole‐3‐Acetic Acid) Using Flow Injection Analysis with Amperometric Detection

Flow injection analysis with amperometric detection (FIA‐AD) at screen‐printed carbon electrodes (SPCEs) in optimum medium of Britton‐Robinson buffer (0.04 mol ? L^?1, pH 2.0) was used for the determination of three tumor biomarkers (homovanillic acid (HVA), vanillylmandelic acid (VMA), and 5‐hydroxyindole‐3‐acetic acid (5‐HIAA)). Dependences of the peak current on the concentration of biomarkers were linear in the whole tested concentration range from 0.05 to 100 μmol ? L^?1, with limits of detection (LODs) of 0.065 μmol ? L^?1 for HVA, 0.053 μmol ? L^?1 for VMA, and 0.033 μmol ? L^?1 for 5‐HIAA (calculated from peak heights), and 0.024 μmol ? L^?1 for HVA, 0.020 μmol ? L^?1 for VMA, and 0.012 μmol ? L^?1 for 5‐HIAA (calculated from peak areas), respectively.     

A novel method for determination of inorganic oxyanions by electrospray ionization mass spectrometry using dehydration reactions

Novel methods for the determination of inorganic oxyanions by electrospray (ES) ionization mass spectrometry have been developed using dehydration reactions between oxyanions and carboxylic acids at the ES interface. Twelve oxyanions (VO₃^?, CrO₄^2?, MoO₄^2?, WO₄^2?, BO₃^3?, SiO₃^2?, SiO₄^4?, AsO₄^4?, AsO₂^?, SeO₄^2?, SeO₃^2? and NO₂^?), out of 16 tested, reacted with at least one of four aminopolycarboxylic acids, i.e. iminodiacetic acid (IDA), nitrilotriacetic acid (NTA), trans‐1,2‐diaminocyclohexane‐N,N,N′,N′‐tetraacetic acid and triethylenetetramine‐N,N,N′,N″,N′″,N′″‐hexaacetic acid, at the ES interface to produce the dehydration products that gave intense mass ion responses, sufficient for trace analysis. As examples, trace determinations of Cr^VI and silica in water samples were achieved after online ion exchange chromatography, where the dehydration product of CrO₄^2? and NTA (m/z 290) and that of SiO₄^4? and IDA (m/z 192) were measured. The limits of detection of the respective methods were 17 nM (0.83 ng Cr/ml) for Cr^VI and 0.17 μM (4.8 ng Si/mL) for SiO₄^4?. Copyright © 2016 John Wiley & Sons, Ltd.     

Development and application of the tartrazine voltammetric sensors based on molecularly imprinted polymers

A modified glassy carbon electrode was prepared as an electrochemical voltammetric sensor based on molecularly imprinted polymer film for tartrazine (TT) detection. The sensitive film was prepared by copolymerization of tartrazine and acrylamide on the carbon nanotube-modified glassy carbon electrode. The performance of the imprinted sensor was investigated by cyclic voltammetry, differential pulse voltammetry, and electrochemical impedance spectroscopy in detail. Under the optimum conditions, two dynamic linear ranges of 8?×?10^?8 to 1?×?10^?6?mol?L^?1 and 1?×?10^?6 to 1?×?10^?5?mol?L^?1 were obtained, with a detection limit of 2.74?×?10^?8?mol?L^?1(S/N?=?3). This sensor was used successfully for tartrazine determination in beverages.     

Mixed Ligand Complexes of Am3+, Cm3+ and Eu3+ with HEDTA and HEDTA + NTA—Complexation Thermodynamics and Structural Aspects

The stability constants and the associated thermodynamic parameters of formation for the 1:1 binary complexes of Am³⁺, Cm³⁺ and Eu³⁺ with N-(2-hydroxyethyl) ethylenediaminetriacetate (HEDTA) and their 1:1:1 ternary complexes with HEDTA + NTA (nitrilotriacate) were determined by distribution ratio measurements using solvent extraction in aqueous solutions of I=0.10?mol?L^?1 (NaClO₄) at temperatures of 0?C45?°C. Formation of these complexes is favored by both the enthalpy (exothermic) and the entropy (endothermic) terms. Luminescence lifetime measurements with Cm and Eu were used to study the coordination environment of these complexes over a range of concentrations and pH values. In the binary complexes M(HEDTA), HEDTA is a hexadentate ligand with three waters of hydration, while in the ternary complexes M(HEDTA)(NTA)^3? we propose that the HEDTA retaines hexadentate coordination with NTA binding via three sites, depending on the pH of the solution, with the observation that the complex may contain a single water of hydration.     

Sensitive Simultaneous Determination of o-Nitrophenol and p-Nitrophenol in Water by Surfactant-Mediated Differential Pulse Voltammetry

A simple, low-cost and sensitive electroanalytical method was developed for the simultaneous determination of p-nitrophenol and o-nitrophenol isomers in water samples at a glassy carbon electrode (CGE) in the presence of cationic surfactant. The electrochemical behavior of p-nitrophenol and o-nitrophenol was studied by cyclic voltammetry (CV) in 0.1?mol L^?1 acetate/acetic acid buffer (pH 3.70) in the presence and absence of cetylpyridinium bromide. The resolution of overlapped cathodic peaks potentials (E_pc) of isomers was successfully improved in the presence of 100.0?µmol L^?1 cetylpyridinium bromide, thus making this approach ideal for the simultaneous determination of isomers. Under the optimized conditions in 0.05?mol L^?1 HEPES buffer at pH 7.0 using differential pulse voltammetry (DPV) at a scan rate of 45?mV s^?1, pulse amplitude of 220?mV and modulation time of 10?ms, limits of detection 0.59?µmol L^?1 for p-nitrophenol and 1.14?µmol L^?1 for o-nitrophenol were obtained with linear ranges from 2.0 to 60.0?µmol L^?1 and 3.0 to 60.0?µmol L^?1, respectively. The intraday precision was assessed as relative standard deviation (%) for 20.0 and 40.0?µmol L^?1 concentrations were 4.30% and 2.41% for p-nitrophenol and 4.87% and 2.20% for o-nitrophenol, respectively. The developed method was applied for the determination of the isomers in lake water samples. The accuracy was attested by comparison with high-performance liquid chromatography with diode array detection (HPLC-DAD) as a reference analytical technique. Recovery values ranging from 90.3% to 111.8% also attested to the accuracy of method for analysis of real samples.     

The electrochemistry of uric acid at a gold electrode modified with L-cysteine, and its application to sensing uric urine

The electrochemistry of uric acid at a gold electrode modified with a self-assembled film of L-cysteine was studied by cyclic voltammetry and differential pulse voltammetry. Compared to the bare gold electrode, uric acid showed better electrochemical response in that the anodic peak current is stronger and the peak potential is negatively shifted by about 100 mV. The effects of experimental conditions on the oxidation of uric acid were tested and a calibration plot was established. The differential pulse response to uric acid is linear in the concentration range from 1.0?×?10^?6 to ~?1.0?×?10^?4 mol?L^?1 (r?=?0.9995) and from 1.0?×?10^?4 to ~?5.0?×?10^?4 mol?L^?1 (r?=?0.9990), the detection limit being 1.0?×?10^?7 mol?L^?1 (at S/N?=?3). The high sensitivity and good selectivity of the electrode was demonstrated by its practical application to the determination of uric acid in urine samples.

Studies on the Interaction of Some Biologically Significant Radical Scavengers on Metal‐Ion Catalyzed Phloroglucinol‐Based Chemical Oscillator

The response of the Ce(III)‐catalyzed phloroglucinol (1,3,5‐trihydroxybenzene)‐based Belousov Zhabotinsky system to the addition of various antioxidants (ascorbic acid, glutathione, inosine, N‐acetylcysteine) is monitored at 30°C under stirred batch conditions. This method is convenient and has good sensitivity for the determination of these antioxidants. The addition of these antioxidants to the BZ mixture influences the oscillatory parameter (number of oscillations) to an extent that depends on the concentration of the antioxidant. The experimental results have shown that the number of oscillations decrease on increasing the concentration of antioxidant. The calibration plots show a linear relationship (R² = 0.98 for ascorbic acid and glutathione and R² = 0.99 for inosine and N‐acetylcysteine) between the number of oscillations and the [antioxidant] over the concentration range of 0.0125‐0.5, 0.05‐0.2, 0.025‐0.1, and 0.1‐0.5 mol L^?1 with detection limits 6.9 × 10^?5, 2.762 × 10^?4, 1.381 × 10^?4, and 5.524 × 10^?4 mol L^?1 for ascorbic acid, glutathione, inosine, and N‐acetylcysteine, respectively. Some aspects of the mechanism of these antioxidants on the BZ system have been discussed.     

Development of an Amperometric Biosensor for β‐N‐Oxalyl‐L‐α,β‐Diaminopropionic Acid (β‐ODAP)

An amperometric method for the determination of the neurotoxic amino acid β‐N‐oxalyl‐L ‐α,β‐diaminopropionic acid (β‐ODAP) using a screen printed carbon electrode (SPCE) is reported. The electrode material was bulk‐modified with manganese dioxide and used as a detector in flow injection analysis (FIA). The enzyme glutamate oxidase (GlOx) was immobilized in a Nafion‐film on the electrode surface. The performance of the biosensor was optimized using glutamate as an analyte. Optimum parameters were found as: operational potential 440 mV (vs. Ag/AgCl), flow rate 0.2 mL min^?1, and carrier composition 0.1 mol L^?1 phosphate buffer (pH 7.75). The same conditions were used for the determination of β‐ODAP. The signal was linear within the concentration range 53–855 μmol L^?1 glutamate and 195–1950 μmol L^?1 β‐ODAP. Detection limits (as 3σ value) for both analytes were 9.12 and 111.0 μmol L^?1, respectively, with corresponding relative standard deviations of 3.3 and 4.5%. The biosensor retained more than 73% of its activity after 40 days of on‐line use.     

Oxidation of thiosulfate by manganese(III) and nickel(III) complexes: A kinetic and mechanistic investigation

The kinetics of the oxidation of thiosulfate ion by [Mn(Y)]^? (H₄Y = trans-cyclohezane-1,2-dimine-N,N,N′,N′-tetraacetic acid) and [Ni(L¹)]²⁺ (HL¹ = 15-amino-3-methyl-4,7,10,13-tetraazapentadec-3-en-2-one oxime) have been investigated at 20.0, 30.0, and 40.0°C in aqueous solution and found to follow the general rate law ?d/dt [complex] = k_ox[S₂O₃^2?] [complex]. The large negative entropy (ΔS?) of activation for the reactions and the results of Marcus calculation provide support for inner-sphere mechanism to be operative. © 1995 John Wiley & Sons, Inc.     

Novel Imprinted Polymer for the Preconcentration of Cadmium with Determination by Inductively Coupled Plasma Mass Spectrometry

A novel Cd(II)-imprinted polymer was prepared with chemical immobilization using N-methacryloyl-L-Histidine as a vinylated chelating agent for online solid-phase extraction of Cd(II) for determination by inductively coupled plasma mass spectrometry. The Cd(II)–monomer complex was synthesized and copolymerized through bulk polymerization method in the presence of ethyleneglycoldimethacrylate cross-linker. The resulting polymer was leached with 1.0?mol?L^?1 HNO₃ to generate the cavities in the polymer for Cd(II) ions. The experimental conditions, including load pH, solution flow rate, and eluent concentration for effective sorption of Cd(II), were optimized using a minicolumn of the imprinted polymer. A volume of 5.0?mL sample 5?µg?L^?1 Cd(II) solution at pH 6.5 was loaded on the column at 2.0?mL?min^?1 using a sequential injection system followed by elution with 1.0?mL of 0.75?mol?L^?1 HNO₃. The relative selectivity coefficients of the imprinted polymer for Cd(II) were 38.5, 3.5, 3.0, 2.5, and 6.0 in the presence of Cu(II), Ni(II), Zn(II), Co(II), and Pb(II), respectively. Computational calculations revealed that the selectivity of the imprinted polymer was mediated by the stability of Cd(II)–N-methacryloyl-L-Histidine complex which was more stable than commonly used monomers including 4-vinyl pyridine, methacrylic acid, and vinylimidazole. The detection limit and relative standard deviation were 0.004?µg?L^?1 and 3.2%, respectively. The method was validated by the analysis of seawater certified reference material (CASS-4) and successfully used for the determination of Cd(II) in coastal seawater and estuarine water.     

Determination of Dopamine Using 2-(4-Boronophenyl)quinoline-4-carboxylic Acids as Fluorescent Probes

The selective identification of dopamine is a significant issue because this compound is an important neurotransmitter closely related to Parkinson’s disease and other mental disorders. 2-(4-Boronophenyl)quinoline-4-carboxylic acid (PBAQA) has been previously reported as a water-soluble fluorescent probe for catechol. However, there are no significant differences in the binding constants between catechol and catecholamines, such as dopamine or levodopa. Here a series of bis-boronic acid compounds based on PBAQA were synthesized and the binding activities were characterized. As a representative compound, the binding constant of 4-(4-((3-(3-borono-4-chlorobenzamido)propyl)carbamoyl)quinolin-2-yl)boronic acid to dopamine is up to 10⁴?L?mol^?1 and much higher than previously reported boronic acid probes. Dopamine selectivity may be achieved by the variation of the substituents in the probe molecules. 4-(4-((3-(3-Borono-4-methoxybenzamido)propyl)carbamoyl)quinolin-2-yl)boronic acid has a stronger binding affinity to dopamine (K_a=5204?±?106?L?mol^?1) than catechol (K_a=2588?±?273?L?mol^?1) or levodopa (K_a=2383?±?273?L?mol^?1). This fluorescence response was used for determining dopamine in a range from 5?×?10^?5?mol?L^?1 to 5?×?10^?4?mol?L^?1 with a detection limit of 7.7?×?10^?6?mol?L^?1. This compound has been successfully used for the assay of dopamine in rabbit plasma, exhibiting excellent specificity. It is believed that synthesized compounds hold great promise as practical platforms to monitor dopamine levels.     

Determination of trace amounts of chromium (VI) by flow injection analysis with chemiluminescence detection

A new sensitive chemiluminescence (CL) method combined with continuous flow injection analysis is described for the determination of Cr(VI). Strong CL signals were generated by Cr(VI)-catalysed oxidation of gallic acid in the presence of potassium permanganate and hydrogen peroxide. Effects of reagent concentrations, temperature, pH, flow rates, mixing coil length and mixing flow sequences on the chemiluminescence intensity were studied. Under the optimised experimental conditions, the relationship between the logarithm of concentration (log?C) of Cr(VI) and the logarithm of intensity (log?I) is linear over the range of 2?×?10^?11 – 5?×?10^?4?mol?L^?1, with the detection limit (3σ) of 4?×?10^?12?mol?L^?1. Relative standard deviation of ten measurements of 1?×?10^?9?mol?L^?1 Cr(VI) is 1.7%. This flow injection analysis (FIA) system proved to be able to analyse up to 40 samples h^?1. Effects of various interferences possibly present in the water samples were investigated. Most cations and anions, as well as organic compounds, did not interfere with the determination of Cr(VI) in water samples. The experimental results obtained for chromium in reference materials were also in good agreement with the certified values.     

Syntheses,structures, and properties of CdII and CoII complexes with 5-(pyridin-4-yl)isophthalate

A N-donor containing carboxylic ligand, 5-(pyridin-4-yl)isophthalic acid (H₂L), was applied to construct two new coordination polymers [Cd(L)(DMF)] _n (1, DMF?=?N,N-dimethylformamide) and {[Co(L)(H₂O)₂]?·?0.5CH₃OH?·?1.5H₂O} _n (2) under different conditions. The complexes were characterized by IR, elemental, and thermogravimetric analyses, powder and single crystal X-ray diffraction. In 1 each L^2? links four Cd^II to form a 3-D framework, while in 2 each L^2? connects three metals to form a 2-D layer structure, which is further connected together by hydrogen bonds to form a 3-D architecture. The thermal stability of the complexes and the photoluminescence of 1 were investigated.     

A ratiometric fluorescent probe for zinc ions based on the quinoline fluorophore

A ratiometric fluorescent zinc probe 1 of carboxamidoquinoline with a carboxylic acid group was designed and synthesised. Probe 1 exhibits high selectivity for sensing Zn²⁺; about a 13-fold increase in fluorescence emission intensity and an 82?nm red-shift of fluorescence emission are observed upon binding Zn²⁺ in EtOH/H₂O (1?:?1, V/V) solution. The ratiometric fluorescence response is attributed to the 1?:?1 complex formation between probe 1 and Zn²⁺ which has been utilised as the basis for the selective detection of Zn²⁺. The analytical performance characteristics of the proposed Zn²⁺-sensitive probe were investigated. The linear response range covers a concentration range of Zn²⁺ from 2.0?×?10^?6 to 5.0?×?10^?5?mol?L^?1 and the detection limit is 2.7?×?10^?7?mol?L^?1. The determination of Zn²⁺ in both tap and river water samples shows satisfactory results.     

Immunoassay for the detection of lead ions in environmental water samples

A rapid, simple, and reliable competitive immunoassay was developed for measurement of lead ions Pb(II) in environmental samples. Avian antibodies were produced against Pb(II). Since lead ions are too small to elicit an immune response, the metal was coupled to protein carrier Bovine serum albumin (BSA) using a bifunctional chelator 1-(4-isothiocyanobenzyl) ethylenediamine N,N,N′,N′-tetra acetic acid (ITCBE). Poultry birds (layers) were immunised with this Pb(II)–ITCBE–BSA immunoconjugate and the avian antibodies (IgY) isolated from egg yolk recognised Pb(II)-ITCBE complexes as capture reagent and a Pb(II)–ITCBE conjugate of Alkaline phosphatase as an enzyme label. Antibody reaction was optimised for different concentrations of antigen and antibody dilutions. Cross reactivity with other metals were below 1% in competitive ELISA. The IC₅₀ value of this avian antibody was 0.19?µg?mL^?1. The detection range and the detection limit were 0.02–1000?µg?mL^?1and 0.2?µg?mL^?1, respectively.