PALLADIUM DIHALIDE COMPLEXES WITH D,L-ETHIONINE

Abstract

By reaction of palladium halides with D,L-ethionine (D,L-EthH; molar ratio 1:1) in dichloromethane solutions containing an excess of 2,6-dimethyl-4H-pyran-4-one (DMP) [Pd(D,L-EthH)X₂] (X?Cl, Br or I) complexes have been isolated. When the solvent was benzene [Pd(D,L-EthH)X₂].DMP adducts were obtained in which the DMP molecule does not bind to the metal. The complexes have been characterized by infrared and nmr (¹H and ¹³C) spectroscopy and by thermogravimetric measurements (TG, DTG and DTA). The importance of DMP in determining the reaction course is discussed.     

Palladium(II) and platinum(II) halide complexes with 2,6-dimethyl-4H-pyran-4-thione

Summary 2,6-Dimethyl-4H-pyran-4-thione (DMTP) acts as a sulphur donor towards Pt^II and Pd^II halides yielding adducts of general formula [M(DMTP)₂X₂] (M=Pd or Pt; X=Cl, Br or I). When complex syntheses are performed in benzene, the solvated species [M(DMTP)₂X₂]·C₆H₆ (M=Pd or Pt; X=Cl or Br) are obtained. The compounds have been characterized by i.r. and n.m.r. (¹H and¹³C) spectroscopy and by thermogravimetric data. The adduct geometry and the influence of benzene are discussed.     

Tin(IV) complexes of 2‐benzoylpyridine N(4)‐phenyl‐thiosemicarbazone: spectral characterization,structural studies and antifungal activity

Three tin(IV) complexes of 2‐benzoylpyridine N(4)‐phenylthiosemicarbazone (H2Bz4Ph) were prepared: [Sn(L)Cl₃] (1), [BuSn(L)Cl₂] (2) and [(Bu)₂Sn(L)Cl] (3), in which L stands for the anionic ligand formed upon complexation with deprotonation and release of HCl. The complexes were characterized by a number of spectroscopic techniques. The crystal structures of H2Bz4Ph and complex 3 were determined. The antifungal activity of the ligand and its tin(IV) complexes was tested against Candida albicans. The thiosemicarbazone proved to be more active than the tin(IV) complexes. Copyright © 2003 John Wiley & Sons, Ltd.     

An experimental and a DFT study on the synthesis, spectroscopic characterization, and reactivity of the adducts of dimethyl- and diphenyltin(IV) dichlorides with γ-pyrones [4H-pyran-4-one (PYR) and 2,6-dimethyl-4H-pyran-4-one (DMP)]: Crystal structure of Ph2SnCl2(PYR)

The Sn(IV) R₂SnCl₂(γ-pyrone)_n [R = Me or Ph; γ-pyrone = 4H-pyran-4-one (PYR) or 2,6-dimethyl-4H-pyran-4-one (DMP); n = 1 or 2] adducts have been synthesized and investigated. The adducts Ph₂SnCl₂(PYR) (1), Me₂SnCl₂(PYR)₂ (2), Ph₂SnCl₂(DMP) (3) and Me₂SnCl₂(PYR)(PNO) (4), (PNO = 4-methylpyridine N-oxide) have been prepared by the addition of the corresponding γ-pyrone to chloroform solution of R₂SnCl₂. The new compounds have been characterized by elemental analysis and spectroscopic (IR, ¹H, ¹³C NMR and Mössbauer) means. The single-crystal diffraction study of 1 shows the Sn(IV) to be five-coordinate, [Sn-O and Sn-Cl(1), Sn-Cl(2) distances of 2.3190(13) and 2.4312(6), 2.3653(7), respectively], and the Cl-Sn-Cl bond angle to be 91.17°. The reactivity of 2 towards bipy, Ph₃PO, QNO (Q = quinoline) resulted in complete displacement of PYR and formation of already known compounds whereas, the PNO displaced only one equivalent of PYR, causing the preparation of the new mixed complex 4, possibly through a S_N¹ formation mechanism. DFT/B3LYP molecular orbital calculations were carried out for the 1-4 complexes, their precursors, Ph₂SnCl₂, (5) and Me₂SnCl₂, (6) and the ligands, PYR, DMP and PNO in an attempt to explain the structures and reactivity of the complexes. Optimized resulting geometries, vibrational frequencies, and the electron-accepting ability of the complexes and the precursors towards nucleophiles are discussed.     

Preparation and spectroscopic characterization of iron(II) and copper(II) complexes of a functionalized crown ether

Condensation between 4′-aminobenzo-15-crown-5- and 4-antipyrinecarboxaldehyde yielded the functionalized crown ether (L = 1,5-dimethyl-4-[(2,3,5,6,8,9,11,12-octahydro-1,4,7,10,13-benzopentaoxacyclopentadecin-15-ylimino)methyl]-2-phenyl-1,2-dihydro-3H-pyrazol-3-one). A 1:1 (Na⁺:L) complex has been prepared. The reaction of Fe(II) and Cu(II) salts with L gave complexes of composition [Fe(L)Cl₂] and [Cu(L)₂Cl₂]. Heteronuclear complexes [Fe(L)Cl₂Na]ClO₄ and [Cu(L)₂Cl₂Na]ClO₄ have also been synthesized from the reactions of [Fe(L)Cl₂] and [Cu(L)₂Cl₂] with NaClO₄. The compounds have been characterized by microanalyses and spectroscopic methods.     

Total synthesis of the sesquiterpene (±)-hirsutene using an organoselenium-mediated cyclization reaction

Cyclization of 2-carbomethoxy-3-(4',4'-dimethylcyclopent-2-enylmethyl)cyclopentanone (4) with N-phenylselenophthalimide and tin(IV) chloride affords cis-syn-cis-1β-carbomethoxy-4,4-dimethyl-3β-phenylselenotricyclo [6.3.0.0^2,6]undecan-11-one (8) and cis-anti-cis-1β-carbomethoxy-4,4-dimethyl-3α-phenylselenotricyclo [6.3.0.0^2,6]undecan-11-one (9). Both of these selenides can be elaborated to cis-anti-cis-4,4-dimethyl-1β-methyltricyclo [6.3.0.0^2,6]undecan-11-one (13) which upon treatment with CH₂Br₂/ TiCl₄/Zn affords the sesquiterpene (±)-hirsutene (1) in 20% overall yield.     

Complexation and thermogravimetric investigation on tin(II) and tin(IV) with norfloxacin as antibacterial agent

The interaction of tin(II) and tin(IV) chlorides with norfloxacin (NOR) has been investigated. Elemental analysis, infrared, mass spectra and thermal analysis have been used to characterize the isolated solid complexes. The results support the formation of complexes with the formula [Sn(NOR)₂]Cl₂·4H₂O and [Sn(NOR)₃]Cl₄. The infrared spectra of the isolated solid complexes suggested that NOR act as bidentate ligand through the carbonyl oxygen atom and one oxygen atom of the carboxylic group forming six-membered rings with the tin ions. The interpretation, mathematical analysis and evaluation of kinetic parameters of thermogravimetric (TGA) and its differential (DTG), such as entropy of activation, pre-exponential factors, activation energy evaluated by using Coats–Redfern and Horowitz–Metzger equations are carried out for two complexes. The data obtained indicate that the two complexes decompose in one stage and general mechanisms describing the decomposition are suggested. Furthermore, the electronic, and ¹H?NMR spectra have been studied.     

Cobalt(II) complexes of 5,7-dimethyl[1,2,4]-triazolo-[1,5-a]-pyrimidine. Spectroscopic characterization,XRD study and antimicrobial activity

Summary Several cobalt(II) complexes of 5,7-dimethyl-[1,2,4]-tria-zolo-[1,5-a]-pyrimidine (DMTP) have been prepared and characterized by thermal and spectroscopic techniques. The crystal structure of [Co(DMTP)₂(H₂O)₄]Br₂·2H₂O has been determined by XRD; the metal ion is octahedrally coordinated by two DMTP ligands through the usual N(3) site and four water molecules. Metal binding to N(3) for DMTP is consistent with the electronic properties calculated with the MOPAC programme. All the complexes were screened for their activity against several types of bacteria, showing a broad-spectrum antimicrobial activity.     

Diorganotin(IV) Complexes of Some Schiff Bases With a Potential Biological Activity

Diorganotin dichloride compounds, Rl₂SnCl₂ (R=Me, nBu, Ph) react with Schiff bases (L), derived from substituted and non-substituted 2- or 3-aminopyridine with 2-hydroxy-, 2-methoxy- or 2-hydroxy-3-methoxy-benzaldehyde in a 1 : 1 molar ratio, to give complexes of general formula R₂SnCl₂·L. It is suggested that the Schiff bases coordinate with tin in bidentate fashion to give hexacoordinate tin species. Almost all the complexes prepared show some 1 : 1 molar conductivity in ethanol and DMF, indicating on R₂Sn(L)Cl⁺ Cl⁻ ionic structure type. The complexes were screened against seven species of bacteria.     

Synthesis,structural characterization,antimicrobial, DNA-binding,and photo-induced DNA cleavage activity of some bio-sensitive Schiff base copper(II) complexes

Schiff base mixed-ligand copper complexes [CuL¹(phen)Cl₂], [CuL¹(bipy)Cl₂], [Cu(L¹)₂Cl₂], [Cu(L²)₂Cl₂], [CuL²(bipy)Cl₂], and [CuL²(phen)Cl₂] (where L^1?=?4-[3,4-dimethoxy-benzylidene]-1,5-dimethyl-2-phenyl-1,2-dihydro-pyrazole-3-one; L^2?=?4-[3-hydroxy-4-nitro-benzylidene]-1,5-dimethyl-2-phenyl-1,2-dihydro-pyrazole-3-one; phen?=?1,10-phenanthroline; and bipy?=?2,2′-bipyridine) have been synthesized and characterized. Their DNA-binding properties have been studied by electronic absorption spectra, viscosity, and electrochemical measurements. The absorption spectral and viscosity results suggest that the copper(II) complexes bind to DNA via partial intercalation. The addition of DNA resulting in the decrease of the peak current of the copper(II) complexes indicates their interaction. Interaction between the complexes and DNA has also been investigated by submarine gel electrophoresis. The copper complexes cleave supercoiled pUC19 DNA to nicked and linear forms through hydroxyl radical and singlet oxygen in the presence of 3-mercaptopropionic acid as the reducing agent. These copper complexes promote the photocleavage of pUC19 DNA under irradiation at 360?nm. Mechanistic study reveals that singlet oxygen is likely to be the reactive species responsible for the cleavage of plasmid DNA by the synthesized complexes. The in vitro antimicrobial study indicates that the metal chelates have higher activity against the bacterial and fungal strains than the free ligands.     

Potentiometric Titrations and Nickel(II) Complexes of Four Topologically Constrained Tetraazamacrocycles

Abstract

The novel high spin Ni²⁺ complexes of the topologically constrained tetraazamacrocycles (1–4) [4,11-dimethyl-1,4,8,11 - tetraazabicyclo[6.6.2]hexadecane (1); 4,10-dimethyl-1,4,7,10-tetraazabicyclo[6.5.2]pentadecane (2); 4,10-dimethyl-1,4,7,10-tetraazabicyclo[5.5.2]tetradecane (3); racemic-4,5,7,7,11,12,14,14-octamethyl-1,4,8,11-tetraazabicyclo[6.6.2]hexadecane (4)] show striking properties. Potentiometric titrations of the ligands 2 and 4 revealed them to be proton sponges, as reported earlier for 1 [1]. Ligand 3 is less basic, losing its last proton with a pK = 11.3(2). Despite high proton affinities, complexation reactions in the absence of protons successfully yielded Ni²⁺ complexes in all cases. The X-ray crystal structures of Ni(1)(acac)⁺, Ni(3)(acac)⁺ and Ni(1)(OH₂)₂ ²⁺ demonstrate that the ligands enforce a distorted octahedral geometry on Ni²⁺ with two cis sites occupied by other ligands. Magnetic measurements and electronic spectroscopy on the corresponding Ni(L)Cl₂ (L = 1–3) complexes reveal that all are high spin and six-coordinate with typical magnetic moments. In contrast, [Ni(4)Cl⁺] is five-coordinate with a slightly higher magnetic moment and its own characteristic electronic spectrum. The extra methyl groups on ligand 4 define a shallow cavity, sterically allowing only one chloride ligand to bind to the nickel(II) ion.     

New orthogonally functionalized synthetic blocks from <Emphasis Type="Italic">R</Emphasis>-(−)-carvone

The intramolecular cyclization of (−)-cis-carveol under iodine treatment afforded (1R,5R,6S)-6-iodomethyl-2,6-dimethyl-7-oxabicyclo[3.2.1]oct-2-ene that was subjected to allyl oxydation with the complex CrO₃DMP giving a synthetically valuable building block, (1R,5R,6S)-6-iodomethyl-2,6-dimethyl-7-oxabicyclo[3.2.1]oct-2-ene-4-one. In the latter the double bond was cleaved by ozonization to obtain the expected trioxo derivative, and the subsequent ozonolysis of its enol form provided a multiple functionalized tetrahydrofuran derivative.     

Complexes of TiCl4, VCl4 and SnX4 (X = Cl or Br) with Schiff bases derived from 2-aminobenzimidazole

Summary The reactions of anhydrous titanium(IV), tin(IV) and vanadium(IV) halides with Schiff bases derived from 2-aminobenzimidazole and 4-methylbenzaldehyde (abimbz) and salicylaldehyde (abisal), yield hexacoordinated complexes M(abimbz)Cl₄ and M(abisal)₂X₄ (M = Ti, Sn or V; X = Cl or Br).The compounds have been characterized by elemental analyses, magnetic measurements, e.p.r., electronic and i.r. spectral studies. I.r. spectra suggest that the Schiff base (abimbz) is coordinated as a bidentate ligand with the metal ion and the (abisal) base acts as a monodentate ligand.     

Synthesis and spectroscopic studies of diorganotin(IV) adducts based on cyclotriphosphazene scaffolds with exocyclic pyrazolyl substituents

Functionalized cyclotriphosphazenes with four pyrazolyl substituents have been employed for the synthesis of two new organotin complexes. These new compounds have been characterized by elemental analysis and IR, ¹H, ³¹P and ¹¹⁹Sn NMR spectroscopy. On the basis of these data, pyrazolylcyclotriphosphazene is bis-bidentate neutral ligand coordinating to two SnMe₂Cl₂ molecules in the resulting adducts. Coordination occurs only via the pyrazolyl nitrogens; cyclotriphosphazene ring nitrogens are not involved in coordination. The ¹¹⁹Sn NMR data are consistent with increasing of coordination number of tin(IV) in solution.     

Synthesis and spectroscopic properties of [N-(4-carboxyphenyl) salicylideneiminato] di- and tri-organotin (IV) complexes and crystal structures of {[Bu2Sn(2-OHC6H4CHNC6H4COO)]2O}2 and Ph3Sn(2-OHC6H4CHNC6H4COO)

Reactions of R₂SnO (R: ⁿBu, Cy, Ph, PhCH₂) and R₃SnCl (R: Ph, Cy, PhCH₂, 2-Cl-PhCH₂, 4-F-PhCH₂, 4-Cl-PhCH₂) with N-(4-carboxyphenyl)-salicylideneimine (LH₂) in 1:1 stoichiometry afford complexes {[R₂Sn(LH)]₂O}₂ and R₃Sn(LH). These complexes have been characterized by elemental analyses, IR, ¹H and ¹¹⁹Sn NMR spectroscopy. The crystal structures of {[ⁿBu₂Sn(LH)]₂O}₂, 1 and Ph₃Sn(L), 5 are determined by single crystal X-ray diffraction. Results showed that in the solid state the complex 1 is a tetranuclear centrosymmetric dimer with six-coordination being assigned to both the endo-cyclic and exo-cyclic tin atoms after consideration of close intermolecular tin oxygen contacts, and study show that the imino nitrogen atom do not participate in coordination to the tin atom. The complex 5 is a monomer, and in the molecule the tin atoms are five-coordinated in trigonal bipyramidal geometries with the two oxygen atom of the carboxylate both coordinating to the tin atoms.     

Darstellung,Eigenschaften und Molekülstrukturen von Dimethylaminomethylferrocenyl‐Verbindungen ausgewählter Elemente der Gruppen 13 und 14

Preparation, Properties, and Molecular Structures of Dimethylaminomethyl Ferrocenyl Compounds of selected Elements of Group 13 and 14 Dimethylmetalchlorides of gallium and indium react with dimethylaminomethylferrocenyllithium (FcNLi) to give the corresponding dimethylmetaldimethylaminomethylferrocenes 1 and 2 [Me₂MFcN; M=Ga, In]. In a similar manner dialkylmetaldichlorides of germanium and tin yield the expected chlordialkylmetaldimethylaminomethylferrocenes 3 – 5 [R₂(Cl)MFcN; M=Ge; R = Me ( 3 ), M=Sn; R=Me ( 4 ), Ph ( 5 )]. In a reaction of Me₃Al and Me₂AlCl with dimethylaminomethylferrocene the formation of the 1 : 1 adducts 7 and 8 could be observed. All compounds were characterised by ¹H and ¹³C nmr spectroscopy. The molecular structures of 1 , 3 , 4 and 7 were determined. 3 and 4 build in contrast to 1 monomeric molecules with chelat rings as a result of the M–N coordination. Compound 7 consist of monomeric molecules with 4 coordinated Al atoms.     

Syntheses,characterizations, and crystal structures of tri‐ and diorganotin (IV) derivatives with 2‐mercapto‐5‐methyl‐1,3,4‐thiadiazole

A series of organotin(IV) complexes with 2‐mercapto‐5‐methyl‐1,3,4‐thiadiazole (HL) of the type R₃ Sn(L) (R = Me 1 ; Bu 2 ; Ph 3 ; PhCH₂ 4 ) and R₂Sn(L)₂ (R = CH₃ 5 ; Ph 6 ; PhCH₂ 7 ; Bu 8 ) have been synthesized. All complexes 1–8 were characterized by elemental analysis, IR,¹H, ¹³ C, and ¹¹⁹Sn NMR spectra. Among these, complexes 1 , 3 , 4 , and 7 were also determined by X‐ray crystallography. The tin atoms of complexes 1 , 3 , and 4 are all penta‐coordinated and the geometries at tin atoms of complexes 3 and 4 are distorted trigonal–bipyramidal. Interestingly, complex 1 has formed a 1D polymeric chain through Sn and N intermolecular interactions. The tin atom of complex 7 is hexa‐coordinated and its geometry is distorted octahedral. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:353–364, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20215     

Unusual aluminum chloride-assisted conversion of isopropenyl acetate into 3-acetyl- and 3,5-diacetyl-2,6-dimethyl- 4<Emphasis Type="Italic">H</Emphasis>-pyran-4-ones

Reflux of isopropenyl acetate with an excess of AlCl₃ in 1,2-dichloroethane affords 3,5-diacetyl-2,6-dimethyl-4H-pyran-4-one in 17% yield. The mild acidic cleavage of the latter (2% HCl, 20 °C, 16 h) gives 3-acetyl-2,6-dimethyl-4H-pyran-4-one in 87% yield, whereas this reaction under more drastic conditions (17% HCl, reflux, 3 h) gives 2,6-dimethyl-4H-pyran-4-one in 61% yield.     

Nickel‐Triad Complexes of a Side‐on Coordinating Distannene

NHC adducts of the stannylene Trip₂Sn (Trip=2,4,6‐triisopropylphenyl) were reacted with zero‐valent Ni, Pd, and Pt precursor complexes to cleanly yield the respective metal complexes featuring a three‐membered ring moiety Sn‐Sn‐M along with carbene transfer onto the metal and complete substitution of the starting ligands. Thus the easily accessible NHC adducts to stannylenes are shown to be valuable precursors for transition‐metal complexes with an unexpected Sn? Sn bond. The complexes have been studied by X‐ray diffraction and NMR spectroscopy as well as DFT calculations. The compounds featuring the structural motif of a distannametallacycle comprised of a [(NHC)₂M⁰] fragment and Sn₂Trip₄ represent rare higher congeners of the well‐known olefin complexes. DFT calculations indicate the presence of a π‐type Sn–Sn interaction in these first examples for acyclic distannenes symmetrically coordinating to a zero‐valent transition metal.     

Synthesis and characterization of some organotin(IV) adducts containing a related series of pyridines: Crystal structure of [SnMe2Cl2(bu2bpy)]

Organotin(IV) complexes of [SnR_(4−n)Cl_n] (n = 2, R = Me, ⁿBu; n = 1, R = Ph) react with the bidentate pyridyl ligand 4,4′-di-tert-butyl-2,2′-bipyridine (bu₂bpy) to give hexa-coordinated adducts with the general formula [SnR_(4−n)Cl_n(bu₂bpy)]. However, the reaction of these organotin(IV) complexes with the corresponding monodentate ligand 4-tert-butylpyridine (bupy) resulted in the formation of the hexa-coordinated complex [SnMe₂Cl₂(bupy)₂] and the penta-coordinated complexes [SnR_(4−n)Cl_n(bupy)] (n = 2, R = ⁿBu; n = 1, R = Ph). Moreover, the reaction of the above organotin(IV) complexes with 4,4′-trimethylenedipyridine (tmdp) yields hexa-coordinated adducts with the general formula [SnR₂Cl₂(tmdp)] (R = Me, ⁿBu) and the penta-coordinated complex [ClPh₃Sn-μ-(tmdp)SnPh₃Cl] in the solid state. The resulting complexes have been characterized by multinuclear NMR (¹H, ¹³C, ¹¹⁹Sn) spectroscopy and elemental analysis. NMR data shows that the triphenyltin(IV) adducts are not stable in solution and dissociate to give tetra-coordinated tin(IV) complexes. The X-ray crystal structure determination of [SnMe₂Cl₂(bu₂bpy)] reveals that the tin atom is hexa-coordinated in an octahedral geometry with a trans-[SnMe₂] configuration.