Reduction Reaction of the Copper(II) Complex Bearing 1,3-Di(pyridine-2-carboxaldimino)propane (pitn) by Decamethylferrocene in Acetonitrile

The reduction reaction of the Cu(II)–pitn complex (pitn = 1,3-di(pyridine-2-carboxaldimino)propane) by decamethylferrocene [Fe(Cp*)₂] was examined in acetonitrile. The observed pseudo-first-order rate constants exhibited saturation kinetics with increasing excess amount of [Fe(Cp*)₂]. Detailed analyses revealed that the reaction is controlled by a structural change prior to the electron transfer step, rather than a conventional bimolecular electron transfer process preceded by ion pair (encounter complex) formation. The rate constant for the structural change was estimated to be 275 ± 13 s^?1 at 298 K (?H* = 33.3 ± 1.0 kJ·mol^?1, ?S* = 86 ± 5 J·mol^?1·K^?1), which is the fastest among gated reactions involving CuN₄ complexes. It was confirmed by EPR measurement and Conflex calculations that the dihedral angle between the two N–N planes is significantly large (40°) in solution whereas it is merely 17.14° in the crystal.     

4-Hydroxy-3,5-pyridinedicarboxylic Acids: Synthesis,Complexation Properties Towards Fe(III), Al(III), Cu(II), Zn(II), Human Serum Albumin,and Cellular Toxicity

4-hydroxy-3,5-pyridinedicarboxylic acid (DQ58) and 4-hydroxy-1-methyl-3,5-pyridinedicarboxylic acid (DQ71508) have been synthesized, and their Fe(III), Al(III), Cu(II), and Zn(II) coordination properties have been studied by potentiometry, UV–Vis spectroscopy (in the case of Fe(III), Al(III), Cu(II)), ¹H-NMR (for Al(III)) and EPR (for Cu(II)). The thermodynamic results were used to model the extent of the toxic metal ions decorporation (Fe(III) or Al(III)) in the presence of the essential metal ions (Cu(II) or Zn(II)). DQ58 and DQ71508 were demonstrated to interact with human serum albumin (HSA), which is assumed to be the main serum transporter of the chelators, and binding constants have been obtained by ultrafiltration. IC₅₀ values of 5.185 × 10^?3 and 1.033 × 10^?3 mol·L^?1 were collected after 24 and 48 h of treatment with DQ71508 towards human embryonic kidney HEK-293 cells, demonstrating the relatively low cytotoxicity of this compound. According to these results, both DQ58 and DQ71508 seem to be potential candidates for Fe chelation therapy, and DQ58 is a better Fe(III) chelator than DQ71508.     

2,2′-Dihydroxybenzophenone thiosemicarbazone as a spectrophotometric reagent for the determination of copper,cobalt, nickel,and iron trace amounts in mixtures without previous separations

2,2′-Dihydroxybenzophenone thiosemicarbazone forms complexes with Cu(II) (λ_max = 385 nm, ? = 8.60 × 10³ liter · mol^?1 · cm^?1); Ni(II) (λ_max = 380 nm, ? = 15.4 × 10³ liter · mol^?1 · cm^?1); Co(II) (λ_max = 380 nm, ? = 12.3 × 10³ liter · mol^? · cm^?1); and Fe(III) (λ_max = 365 nm, ? = 7.9 × 10³ liter · mol^?1 · cm^?1) and have been applied to the analysis of these metal ions in binary, ternary, and quaternary mixtures. The determination procedures are based exclusively on the different pH values of the formation complexes, hence the extraction step is not necessary.     

Exploring antibiotic resistant mechanism by microcalorimetry II

In an effort to understand the reaction of antibiotic hydrolysis with B2 metallo-??-lactamases (M??Ls), the thermodynamic parameters of imipenem hydrolysis catalyzed by metallo-??-lactamase ImiS from Aeromonas veronii bv. sobria were determined by microcalorimetric method. The values of activation free energy $ \Updelta G_{ \ne }^{\theta } $ are 86.400?±?0.043, 87.543?±?0.034, 88.772?±?0.024, and 89.845?±?0.035?kJ?mol^?1 at 293.15, 298.15, 303.15, and 308.15?K, respectively, activation enthalpy $ \Updelta H_{ \ne }^{\theta } $ is 18.586?±?0.009?kJ?mol^?1, activation entropy $ \Updelta S_{ \ne }^{\theta } $ is ?231.34?±?0.12?J?mol^?1?K^?1, apparent activation energy E is 21.084?kJ?mol^?1, and the reaction order is 1.5. The thermodynamic parameters reveal that the imipenem hydrolysis catalyzed by metallo-??-lactammase ImiS is an exothermic and spontaneous reaction.     

Equilibrium investigation of complex formation reactions involving copper(II), nitrilo-tris(methyl phosphonic acid) and amino acids,peptides or DNA constitutents. The kinetics,mechanism and correlation of rates with complex stability for metal ion promoted hydrolysis of glycine methyl ester

The complex formation reactions of [Cu(NTP)(OH₂)]^4? (NTP?=?nitrilo-tris(methyl phosphonic acid)) with some selected bio-relevant ligands containing different functional groups, are investigated. Stoichiometry and stability constants for the complexes formed are reported. The results show that the ternary complexes are formed in a stepwise mechanism whereby NTP binds to copper(II), followed by coordination of amino acid, peptide or DNA. Copper(II) is found to form Cu(NTP)H _n species with n?=?0, 1, 2 or 3. The concentration distribution of the various complex species has been evaluated. The kinetics of base hydrolysis of glycine methyl ester in the presence of copper(II)-NTP complex is studied in aqueous solution at different temperatures. It is proposed that the catalysis of GlyOMe ester occurs by attack of OH^? ion on the uncoordinated carbonyl carbon atom of the ester group. Activation parameters for the base hydrolysis of the complex [Cu(NTP)NH₂CH₂CO₂Me]^4? are, ΔH^±?=?9.5?±?0.3?kJ?mol^?1 and ΔS^±?=??179.3?±?0.9?J?K^?1?mol^?1. These show that catalysis is due to a substantial lowering of ΔH^±.     

Thermal decompositions of formates. Part IV. Thermal dehydrations of Mg(II), Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) formate dihydrates

The thermal dehydrations of formate dihydrates of Mg(II), Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) were studied by means of thermogravimetry, differential thermal analysis and differential scanning calorimetry in air.The reaction orders of dehydration obtained by the dynamic and the static methods were found to be 2/3 for all the salts examined, which indicated that the rate of dehydration was controlled by a chemical process at a phase boundary. This was confirmed by microscopic observation.The values of activation energy, frequency factor and the enthalpy change of dehydration for all salts examined, were 21–30 kcal mole^?1, 10¹⁰-10¹² sec^?1 and 28–31 kcal mole^?1, respectively.The temperature at which the dehydration occurred was regarded as a measure of the strength of the metalOH₂ bond, and this temperature increased with increasing the reciprocal of the radius of the metallic ion.     

铜（II）离子对脱镁叶绿素-a荧光猝灭的研究

本文介绍了一种利用荧光熄灭定量的测定铜（II）的新方法。从新鲜菠菜中提取叶绿素-a,用高氯酸溶液处理,制得脱镁叶绿素-a。测量脱镁叶绿素-a的紫外-可见吸收光谱,观测到505和535nm处有特征吸收峰。在60 ℃水浴中,脱镁叶绿素-a的丙酮溶液与铜（II）离子水溶液混合,5分钟后发现混合液颜色变绿,505和535 nm处吸收峰消失。铜（II）离子水溶液与脱镁叶绿素-a的丙酮溶液混合后发生荧光猝灭现象,而类似浓度的其它生理离子在相同反应条件下对脱镁叶绿素-a的荧光猝灭现象不明显。 研究了铜（II）离子与脱镁叶绿素-a的反应时间,反应温度对荧光强度衰减的影响。并通过阿累尼乌斯经验关系估算铜（II）离子与脱镁叶绿素-a反应的活化能约为10 ±1kJ·mol-1。研究了铜（II）离子的浓度对脱镁叶绿素-a的丙酮溶液荧光强度的影响,在8.0×10-5 ～8.0×10-7 mol·dm-3范围内,铜（II）离子的浓度与混合液的荧光强度成线性衰减关系,检测限可达8.0×10-7 mol·dm-3。利用脱镁叶绿素-a的丙酮溶液的荧光强度变化测量,有望发展成为一种检测铜（II）离子的新方法。     

Synthesis and spectral studies of macrocyclic Cu(II) complexes by reaction of various diamines,copper(II) perchlorate and 1,4-bis(2-carboxyaldehyde phenoxy)butane

Six macrocyclic complexes, were synthesized by reaction of 1,4-bis(2-carboxyaldehyde phenoxy)butane and various amines and their copper(II) perchlorate complexes were synthesized by template effect reaction of 1,4-bis(2-carboxyaldehyde phenoxy)butane, Cu(ClO₄)₂?·?6H₂O and amines. The metal-to-ligand ratios were found to be 1?:?1. Cu(II) metal complexes are 1?:?2 electrolytes as shown by their molar conductivities (Λ_M) in DMF (dimethyl formamide) at 10^?3?M. The Cu(II) complexes are proposed to be square planar based on elemental analysis, FT–IR, UV–Vis, magnetic susceptibility measurements, molar conductivity measurements, and mass spectra.     

The kinetics and mechanism of oxidation of hexacyanoferrate(II) by periodate ion in highly alkaline aqueous medium

The oxidation of hexacyanoferrate(II) by periodate ion has been studied spectrophotometrically by registering an increase in absorbance at 420 nm (λ_max of yellow colored [Fe(CN)₆ ^3?] complex under pseudo first-order conditions by taking excess of [IO₄ ^?] over [Fe(CN)₆ ^4?]. The reaction conditions were: pH = 9.5 ± 0.02, I = 0.1 M (NaCl) and Temp. = 25 ± 0.1 °C. The reaction exhibited first-order dependence on each [IO₄ ^?] and [Fe(CN)₆ ^4?]. The effects of variations of pH, ionic strength and temperature were also studied. The experimental observations revealed that the periodate ion exists in its protonated forms viz. [H₂IO₆]^3? and [H₃IO₆]^2? while [Fe(CN)₆]^4? is present in its deprotonated form throughout the pH region selected for the present study. It has also been observed that deprotonated form of [Fe(CN)₆ ^4?] and protonated forms of periodate ion are the most reactive species towards oxidation of [Fe(CN)₆ ^4?]. The repetitive spectral scan is provided as an evidence to prove the conversion of [Fe(CN)₆ ^4?] to [Fe(CN)₆ ^3?] in the present reaction. The activation parameters have also been computed using the Eyring’s plot and found to be, ΔH? = 51.53 ± 0.06 kJ mol^?1, ΔS? = ?97.12 ± 1.57 J K^?1 mol^?1 and provided in support of a most plausible mechanistic scheme for the reaction under study.     

The solid state reactions of o-aminobenzoic acid with Zn(Ⅱ), Cu(Ⅱ), Ni(Ⅱ), Mn(Ⅱ) acetate hydrate at room temperature

The solid-solid state reactions of o-aminobenzoic acid with Zn(OAc)2.2H2O, Cu(OAc)2 .H2O, Ni(OAc)2.4H2O and Mn(OAc)2.4H2O result in the formation of corresponding complexes M(OAB)2 (M = Zn(Ⅱ), Cu(Ⅱ), Ni(Ⅱ), Mn(IⅡ)). XRD, IR and elemental analysis methods have been used to characterize the solid products. The activation energies of these reactions, which are calculated from the kinetic data obtained by means of the isothermal electrical conductivity measurement method, have been found to increase in the order: Cu(OAc)2.H2O(37.7 kJ.mol-1)~Mn(OAc)2.4H2O (39.7kJ.mol-1) < Zn(OAc)2.2H2O (56.3 kJ.mol-1) < Ni(OAc)2.4H2O (85.2 kJ.mol-1). The trend is related to their crystal structures.     

Synthesis,complex formation kinetics and thermodynamic study of some acyclic polyamine and N2O2 ligands with copper(II)

The polydentate ligands, 3-(2-aminocyclohexylamino)-2-(2-aminocyclohexyl aminomethyl) propionic acid (L¹ ), 4,7,10-triazatridecanedinitrile trihydrochloride (L² ), and 2,2′-(ethane-1,2-diyl) bis(methylazanediyl) diethanol (L³ ) were prepared and their structures investigated by FT-IR, NMR, and MS. The kinetics of complex formation between Cu(II) and L¹, L², and L³ were investigated in acidic aqueous solutions using the stopped-flow method. The stability constants of the complexes were determined by spectrophotometric titration (T?=?293?K, μ?=?0.1?mol?L^?1 NaClO₄), using a diode array UV-Vis spectrophotometer equipped with peristaltic pump and pH meter. The stability constants for the complexes were CuL^1?>?CuL^2?>?CuL³. Activation enthalpies (ΔH#) of these complexes were 55?kJ?mol^?1 for CuL¹, 61?kJ?mol^?1 for CuL², and 36?kJ?mol^?1 for CuL³, respectively.     

The silver(I)‐catalyzed exchange of coordinated cyanide in hexacyanoferrate(II) by phenylhydrazine in aqueous medium

The [Ag]⁺‐catalyzed exchange of coordinated cyanide in [Fe(CN)₆]^4? by phenylhydrazine (PhNHNH₂) has been studied spectrophotometrically at 488 nm by monitoring increase in the absorbance for the formation of cherry red colored complex [Fe(CN)₅PhNHNH₂]^3?. The other reaction conditions were pH 2.80±,0.02, temperature = 30.0 ± 0.1^°C, and ionic strength (I) = 0.02 M (KNO₃). The reaction was followed as a function of pH, ionic strength, temperature, [Fe(CN)^4?₆], [PhNHNH₂], [Ag⁺] by varying one variable at a time. The initial rates were evaluated for each variation using the plane mirror method. The initial rates evaluated as a function of [Fe(CN)^4?₆] clearly indicate that the initial rate increases with the increase in [Fe(CN)^4?₆] and finally reaches to a limiting value when [Fe(CN)^4?₆]/[AgNO₃] ? 1000. It indicates the formation of a strong adduct between [Fe(CN)₆]^4? and AgNO₃ prior to the abstraction of CN^?. The variation in initial rates with [PhNHNH₂] also showed limiting values at [Fe(CN)^4?₆]/[PhNHNH₂] ? 8.30. The complex behavior due to pH and [Ag⁺] variations on the rate has been explained in detail. The composition of the final reaction product [Fe(CN)₅PhNHNH₂] formed during the course of reaction has been found to be 1:1 using the mole ratio method. The evaluated values of activation parameters for the catalyzed reaction are E_a = 53.85 kJ mol^?1, Δ H^≠, = 51.33 kJ mol^?1, and Δ S^≠ = ?134.63 J K^?1 mol^?1, which suggest an interchange dissociative mechanism. A most plausible mechanistic scheme has been proposed based on the experimental observations. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 447–456, 2007     

Determination of Cu(III) in semiconductor ceramics using cationic violet reagent

A method is presented for the determination of Cu(III) ion in semiconductor ceramic materials. It is based on (a) the reaction of copper(III) with Fe(II) ions, (b) the quantitative formation of Fe(III) ions, (c) liquid-liquid extraction of Fe(III) in the form of an ion associate between the FeCl ₄ ^- anion with a Cationic Violet dye, and (d) spectrophotometric quantitation of the ion associate. All processes are executed in a single sequence of steps. The absorbance of the colored extracts obeys Beer's law in the range from 0.16 to 1.92 mg L^?1 of Cu(III). The molar absorptivities range from 38,000 to 82,000 L mol^?1 cm^?1 depending on the kind of extractant used. The effects of other ions on the recovery of Cu(III) were studied, and those that generally occur with copper in semiconductor samples do not interfere.     

Synthesis, Characterization and Biological Evaluation of Fe (III), Co (II), Ni(II), Cu(II), and Zn(II) Complexes with Tetradentate Schiff Base Ligand Derived from Protocatechualdehyde with 2-Aminophenol

Schiff base ligand (H₃L) was prepared from the condensation reaction of protochatechualdehyde (3,4-dihydroxybenzaldhyde)with 2-amino phenol. From the direct reaction of the ligand (H₃L) with Co(II), Ni(II) and Cu(II) chlorides, and Fe(III)and Zn(II)nitrates in 2?M/1?L molar ratio, the five new neutral complexes were prepared. The characterization of the newly formed compounds was done by ¹H NMR, UV?CVis, and IR spectroscopy and elemental analysis. The in vitro antibacterial activity of the metal complexes was studied and compared with that of free ligand.     

A Highly Oxidizing and Isolable Oxoruthenium(V) Complex [RuV(N4O)(O)]2+: Electronic Structure,Redox Properties,and Oxidation Reactions Investigated by DFT Calculations

The electronic structure and redox properties of the highly oxidizing, isolable Ru^V?O complex [Ru^V(N₄O)(O)]²⁺, its oxidation reactions with saturated alkanes (cyclohexane and methane) and inorganic substrates (hydrochloric acid and water), and its intermolecular coupling reaction have been examined by DFT calculations. The oxidation reactions with cyclohexane and methane proceed through hydrogen atom transfer in a transition state with a calculated free energy barrier of 10.8 and 23.8 kcal mol^?1, respectively. The overall free energy activation barrier (ΔG^≠=25.5 kcal mol^?1) of oxidation of hydrochloric acid can be decomposed into two parts: the formation of [Ru^III(N₄O)(HOCl)]²⁺ (ΔG=15.0 kcal mol^?1) and the substitution of HOCl by a water molecule (ΔG^≠=10.5 kcal mol^?1). For water oxidation, nucleophilic attack on Ru^V?O by water, leading to O? O bond formation, has a free energy barrier of 24.0 kcal mol^?1, the major component of which comes from the cleavage of the H? OH bond of water. Intermolecular self‐coupling of two molecules of [Ru^V(N₄O)(O)]²⁺ leads to the [(N₄O)Ru^IV? O₂? Ru^III(N₄O)]⁴⁺ complex with a calculated free energy barrier of 12.0 kcal mol^?1.     

Determination of L-cysteine base on the reversion of fluorescence quenching of calcein by copper(II) ion

We report on a simple and sensitive method for the determination of L-cysteine (Cys). It is based on a redox reaction between the non-fluorescent Cu(II)-calcein complex and Cys which results in fluorescence recovery of calcein. When Cys is added to a solution of the Cu(II)-calcein complex, Cu(II) is reduced to Cu(I), and calcein is released to form a strongly fluorescent complex with Zn(II). The effect was used to develop a fluorescence enhancement method for the determination of Cys. Under the optimum conditions, the increase in signal intensity is linear in the range from 3.0?×?10^?7 to 1.2?×?10^?5?mol?L^?1, with a correlation coefficient (R) of 0.9978. The limit of detection (3σ) is 4.0?×?10^?8?mol?L^?1. The relative standard deviation (RSD) in the determination of 11 samples containing 5.0?×?10^?6?mol?L^?1 of Cys was 3.5%. There is little interference by common ions and other amino acids. The method, which is simple, rapid, and sensitive, was successfully applied to the determination of Cys in human serum samples.

Solid phase extraction and diffusive gradients in thin films techniques for determination of total and labile concentrations of Cd(II), Cu(II), Ni(II) and Pb(II) in Black Sea water

Total dissolved and labile concentrations of Cd(II), Cu(II), Ni(II) and Pb(II) were determined at six locations of the Bourgas Gulf of the Bulgarian Black Sea coast. Solid phase extraction procedure based on monodisperse, submicrometer silica spheres modified with 3-aminopropyltrimethoxysilane followed by the electrothermal atomic absorption spectrometry (ETAAS) was developed and applied to quantify the total dissolved metal concentrations in sea water. Quantitative sorption of Cd, Cu, Ni and Pb was achieved in the pH range 7.5–8, for 30?min, adsorbed elements were easily eluted with 2?mL 2?mol?L^?1 HNO₃. Since the optimal pH for quantitative sorption coincides with typical pH of Black Sea water (7.9–8.2), on-site pre-concentration of the analytes without any additional treatment was possible. Detection limits achieved for total dissolved metal quantification were: Cd 0.002?µg?L^?1, Cu 0.005?µg?L^?1, Ni 0.03?µg?L^?1, Pb 0.02?µg?L^?1 and relative standard deviations varied from 5–13% for all studied elements (for typical Cd, Cu, Ni and Pb concentrations in Black Sea water). Open pore diffusive gradients in thin films (DGT) technique was employed for in-situ sampling and pre-concentration of the sea water and in combination with ETAAS was used to determine the proportion of dynamic (mobile and kinetically labile) species of Cd(II), Cu(II), Ni(II) and Pb(II) in the sea water. Obtained results showed strong complexation for Cu and Pb with sea water dissolved organic matter. The ratios between DGT-labile and total dissolved concentrations found for Cu(II) and Pb(II) were in the range 0.2–0.4. For Cd and Ni, these ratios varied from 0.6 to 0.8, suggesting higher degree of free and kinetically labile species of these metals in sea water.     

Extraction and spectrophotometric determination of trace amounts of tin(II) with diphenylglyoxal bis(2-hydroxybenzoylhydrazone)

Diphenylglyoxal bis(2-hydroxybenzoylhydrazone) has been used as a sensitive reagent for the spectrophotometric determination of tin. This reagent forms an orange-yellow complex with stannous ion at pH 3.5–7.0 (λ_max = 455 nm, ? = 2.25 × 10⁴ liter mol^?1/cm^?1 while no reaction is observed with quadrivalent tin. The colored complex extracted into isobutyl methyl ketone has been used for the spectrophotometric determination of trace amounts of tin(II). The molar absorption in the organic solvent is 3.54 × 10⁴ liter mol^?1 cm^?1 and the compound shows its maximum absorbance at 455 nm. The interferences of foreign ions have been determined.     

Thermal Lens Spectroscopy for Quantitative Determination of a Cu(II) Complex With an 8-Aminoquinoline Derivative in Tap Water and Mining Wastewater Samples Using a Dual Beam Technique

Abstract

This article describes the quantitative determination of Cu(II) using thermal lens spectrometry. The chromogenic reaction involving Cu(II) and 5-(4-sulphophenylazo)-8-aminoquinoline in alkaline solution was studied in different experimental conditions such as pH, ligand concentration, methanol volume, and presence of interfering ions. A collinear dual beam set-up has been used for direct quantitation in water samples without a pre-concentration step. The optimized conditions provided a linear calibration in the concentration range from 3.0 to 15.0?×?10^?7?mol L^?1. The detection and quantitation limits were 6.13?×?10^?8? and 2.04?×?10^?7?mol L^?1, respectively. Resultantly, an application to Cu(II) determination in tap water (recovery 99.8–103.3%) and mining (synthetic) wastewater (95.3–98.0%) shows relative SDs ≤ 3.1%. The method is presented as a new alternative for the direct Cu(II) determination in real samples.     

First Principles (DFT) Characterization of RhI/dppp‐Catalyzed CH Activation by Tandem 1,2‐Addition/1,4‐Rh Shift Reactions of Norbornene to Phenylboronic Acid

The C?H activation in the tandem, “merry‐go‐round”, [(dppp)Rh]‐catalyzed (dppp=1,3‐bis(diphenylphosphino)propane), four‐fold addition of norborene to PhB(OH)₂ has been postulated to occur by a C(alkyl)?H oxidative addition to square‐pyramidal Rh^III?H species, which in turn undergoes a C(aryl)?H reductive elimination. Our DFT calculations confirm the Rh^I/Rh^III mechanism. At the IEFPCM(toluene, 373.15 K)/PBE0/DGDZVP level of theory, the oxidative addition barrier was calculated to be 12.9 kcal mol^?1, and that of reductive elimination was 5.0 kcal mol^?1. The observed selectivity of the reaction correlates well with the relative energy barriers of the cycle steps. The higher barrier (20.9 kcal mol^?1) for norbornyl–Rh protonation ensures that the reaction is steered towards the 1,4‐shift (total barrier of 16.3 kcal mol^?1), acting as an equilibration shuttle. The carborhodation (13.2 kcal mol^?1) proceeds through a lower barrier than the protonation (16.7 kcal mol^?1) of the rearranged aryl–Rh species in the absence of o‐ or m‐substituents, ensuring multiple carborhodations take place. However, for 2,5‐dimethylphenyl, which was used as a model substrate, the barrier for carborhodation is increased to 19.4 kcal mol^?1, explaining the observed termination of the reaction at 1,2,3,4‐tetra(exo‐norborn‐2‐yl)benzene. Finally, calculations with (Z)‐2‐butene gave a carborhodation barrier of 20.2 kcal mol^?1, suggesting that carborhodation of non‐strained, open‐chain substrates would be disfavored relative to protonation.