Copper(II) complex of monobasic tridentate ONN donor ligand: synthesis,encapsulation in zeolite-Y,characterization, and catalytic activity

Reaction between CuCl₂ and (Z)-2-(1-(2-(1H-benzo[d]imidazol-2-yl)ethylimino)ethyl)phenol (Hhap-aebmz) derived from o-hydroxyacetophenone (Hhap) and 2-aminoethylbenzimidazole (aebmz) gives [Cu^II(hap-aebmz)Cl]. Elemental analysis, magnetic susceptibility, spectral (IR and electronic) data, and single crystal X-ray studies confirm the distorted square planar structure of the complex. [Cu^II(hap-aebmz)Cl] has been encapsulated in the nano-cavity of zeolite-Y and its encapsulation is ensured by various physico-chemical techniques. The encapsulated complex has been used as a catalyst for oxidation of cyclohexene and phenol in the presence of H₂O₂. With nearly quantitative oxidation of cyclohexene, the selectivity of the oxidation products follows the order, 2-cyclohexene-1-ol (44%)?>?2-cyclohexene-1-one (40%)?>?cyclohexeneoxide (12%)?>?cyclohexane-1,2-diol (4%). Oxidation of phenol (65.7%) gives catechol (66.1%)?>?hydroquinone (32.9%).     

Oxovanadium(IV) and copper(II) complexes of 1,2-diaminocyclohexane based ligand encapsulated in zeolite-Y for the catalytic oxidation of styrene, cyclohexene and cyclohexane

N,N′-Bis(salicylidene)cyclohexane-1,2-diamine (H₂sal-dach) reacts with oxovanadium(IV) and copper(II) exchanged zeolite-Y in refluxing methanol to yield the corresponding zeolite-Y encapsulated metal complexes, abbreviated herein as [VO(sal-dach)]-Y and [Cu(sal-dach)]-Y. Spectroscopic studies (IR, electronic and ¹H NMR), thermal analysis, scanning electron micrographs (SEM) and X-ray diffraction patterns have been used to characterise these complexes. These encapsulated complexes catalyse the oxidation, by H₂O₂, of styrene, cyclohexene and cyclohexane efficiently in good yield. Under the optimized conditions, the oxidation of styrene catalysed by [VO(sal-dach)]-Y and [Cu(sal-dach)]-Y gave 94.6 and 21.7% conversion, respectively, where styreneoxide, benzaldehyde, benzoic acid, 1-phenylethane-1,2-diol and phenylacetaldehyde being the major products. Oxidation of cyclohexene catalysed by these complexes gave cyclohexeneoxide, 2-cyclohexene-1-ol, cyclohexane-1,2-diol and 2-cyclohexene-1-one as major products. Conversion of cyclohexene achieved was 86.6% with [VO(sal-dach)]-Y and 18.1% with [Cu(sal-dach)]-Y. A maximum of 78.1% conversion of cyclohexane catalysed by [Cu(sal-dach)]-Y and only 21.0% conversion by [VO(sal-dach)]-Y with major reaction products of cyclohexanone, cyclohexanol and cyclohexane-1,2-diol have been obtained.     

Synthesis, characterization and catalytic oxidation of cyclohexene with molecular oxygen with host (nanopores of zeolite-Y)/guest (Ni(II) complexes of 14- and 16-membered tetraaza dioxo diphenyl macrocyclic ligands) nanocomposite materials

Ni(II) complexes of [14]aneN₄: 1,5,8,12-tetraaza-2,9-dioxo-4,11-diphenylcyclotetradecane; [16]aneN₄: 1,5,9,13-tetraaza-2,10-dioxo-4,12-diphenylcyclohexadecane; Bzo₂[14]aneN₄: dibenzo-1,5,8,12-tetraaza-2,9-dioxo-4,11-diphenylcyclotetradecane and Bzo₂[16]aneN₄: dibenzo-1,5,9,13-tetraaza-2,10-dioxo-4,12-diphenylcyclohexadecane have been encapsulated in the nanopores of zeolite-Y by a two-step process in the liquid phase: (i) adsorption of [bis(diamine)nickel(II)] (diamine = 1,2-diaminoethane, 1,3-diaminopropane, 1,2-diaminobenzene, 1,3-diaminobenzene); [Ni(N–N)₂]²⁺–NaY; in the nanopores of the zeolite-Y, and (ii) in situ condensation of the nickel(II) precursor complex with ethylcinnamate. The new host–guest nanocomposite materials (HGNM) were characterized by several techniques: chemical analysis and spectroscopic methods (FT-IR, UV/Vis, XRD and DRS) and the BET technique. These complexes were used for oxidation of cyclohexene with molecular oxygen.     

Synthesis, characterization and catalytic oxyfunctionalization of cyclohexene with tert-butylhydroperoxide over a manganese(II) complex covalently anchored to multi-wall carbon nanotubes (MWNTs)

The chemical modification of multi-wall carbon nanotubes (MWNTs) is an emerging area in material science. In the present study, an hydroxyl functionalized manganese(II) Schiff-base has been covalently anchored on modified MWNTs. The new modified MWNTs have been characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron (XPS), thermal analysis, UV–Vis, diffuse reflectance (DRS), FT-IR spectroscopy and elemental analysis. The results suggest that the symmetrical Schiff-base; N,N-bis(4-hydroxysalicylidene)-ethylene-1,2-diamine; H₂[(OH)₂-salen]; is a bivalent anion with tetradentate N₂O₂ donors derived from the phenolic oxygens and azomethine nitrogens. The formulae was found to be [Mn((OH)₂-salen)] for the 1:1 non-electrolytic complex. The multi-wall carbon nanotubes covalently anchored manganese(II) complex ([Mn((OH)₂-salen)]@MWNTs) catalyze the oxidation of cyclohexene with TBHP. Oxidation of cyclohexene catalyzed by this complex gave 2-cyclohexene-1-ol, 2-cyclohexene-1-one and 1-(tert-butylperoxy)-2-cyclohexene as the major products. The manganese(II) complex covalently anchored on MWNTs shows significantly higher catalytic activity than [Mn((OH)₂-salen)]. The activity of the immobilized catalyst remains nearly the same after three cycles, suggesting the true heterogeneous nature of the catalyst. This catalyst is more selective towards 2-cyclohexene-1-one.     

Mechanism of aziridination of styrene catalyzed by copper(I) bis(oxazoline)

Experimental studies show that copper complexes can be effectively anchored onto the pores of mesoporous solids, having a good catalytic performance in several reactions, among them the aziridination of olefins and in particular, styrene. In this work, the mechanism of the aziridination of styrene catalyzed by a bis(oxazoline) copper(I) complex was studied in detail by means of density functional theory (DFT) calculations. For such reactions in the homogeneous phase, our calculations revealed a wide diversity of reaction‐pathways, which have not been considered in previous studies, and should be taken into account due to the small energy differences between them. What is more, our results show that there is a strong dependence on the chosen DFT functional. This has profound implications on the way the heterogeneous reaction is studied. © 2013 Wiley Periodicals, Inc.     

The Oxidation of Cyclohexene with Polymer Supported Co(II) in Supercritical Carbon Dioxide

It is known that a small change in the pressure near critical point of a fluid causes a significant change in density-dependent properties, such as the solubility parameter, viscosity, and dielectric constant1. Recently, there has been a growing interest in using supercritical fluids (SCFs) as reaction media2, 3. Homogeneous catalysts are capable of high specific activity and selectivity. But their removal from the reaction mixtures is difficult4. The application of reusable polymer-bond…     

Copper(II) catalyzed selective oxidation of primary alcohols to aldehydes with atmospheric oxygen

Copper(II) complex 1 selectively catalyzes the oxidation of primary alcohols to aldehydes in high yields by atmospheric oxygen in the presence of TEMPO. This procedure does not require an additive and the catalyst 1 is recyclable without loss of activity.     

Adsorption of copper(II) ions by keratin/PA6 blend nanofibres

Mats of randomly oriented nanosized filaments, prepared by electrospinning wool keratin/polyamide 6 blends in formic acid, were evaluated as adsorbents of Cu²⁺ ions. The adsorption capacity was evaluated as a function of the nanofibre composition, specific surface area, initial metal ion concentration, contact time and pH of the solution. The adsorption tests revealed that keratin-based nanofibres highly adsorb Cu²⁺ ions and the adsorption capacity increases with increasing the specific surface area of the nanofibre mats. The maximum adsorption capacities for nanofibre mats containing 50%, 70% and 90% (wt.%) of keratin were found to be 61.7 (mg/g), 90 (mg/g) and 103.5 (mg/g), respectively. The Cu²⁺adsorption onto the keratin rich nanofibres is highly pH-dependent and the optimum pH was found above the isoelectric point of keratin. The experimental data fit the pseudo second-order kinetic model. Infrared analysis demonstrated the formation of complexes between Cu²⁺ ions and keratin that involve terminal free carboxyl groups of the protein.     

Preparation of ethambutol-copper(II) complex and fabrication of PVC based membrane potentiometric sensor for copper

Copper(II) complex of ethambutol (I) was prepared and used in the fabrication of Cu(2+) selective ISE membrane. The membrane having Cu(II)-ethambutol complex (I) as electroactive material, along with sodium tetraphenylborate (NaTPB) as anion discriminator, dioctylphthalate (DOP) as plasticizer in poly(vinyl chloride) (PVC) matrix in the percentage ratio 6:2:190:200 (I:NaTPB:DOP:PVC) (w/w) gave a linear response in the concentration range 7.94x10(-6) to 1.0x10(-1) M of Cu(2+) with a slope of 29.9+/-0.2 mV per decade of activity and a fast response time of 11+/-2 s. The sensor works well in the pH range 2.1-6.3 and could be satisfactorily used in presence of 40% (v/v) methanol, ethanol and acetone and is selective for copper over a large number of cations with slight interference from Na(+) and Co(2+) if present at a level 1.5x10(-5) and 6.5x10(-5) M, respectively. It works well over a period of 6 months and can also be used as indicator electrode for the end point determination in the potentiometric titration of Cu(2+) against EDTA as well as in the determination of Cu(2+) in real samples.     

Removal of copper(II) from aqueous solution with rape stalk modified by citric acid

In this paper, rape stalk was modified with citric acid (CA) to prepare copper ion biosorbent. The modified rape stalk (MRS) was characterized by Fourier transforms infrared (FTIR), zeta potential, and thermogravimetric analysis (TGA). The effects of various parameters like initial Cu²⁺ concentration, contact time, initial pH, and temperature on adsorption capacity were studied. The adsorption capacity of MRS at 298 K was 69.84 mg/g, far higher than 18.24 mg/g for native rape stalk (NRS). The adsorption mechanism was also evaluated in terms of kinetics and thermodynamics. The adsorption equilibrium data was well described by the Langmuir isotherm model. The adsorption process followed the pseudo-second-order rate kinetics. Thermodynamic study showed spontaneous and endothermic nature of the adsorption process. The ion exchange of the adsorption mechanism was affirmed. MRS could be a potentially low-cost and green adsorbent for removal of Cu²⁺ from aqueous solution.     

Comparative study on interaction between copper (II) and chitin/chitosan by density functional calculation

The DMol³ calculations, based on density functional theory (DFT), have been employed to investigate the interactions between Cu²⁺ and chitin/chitosan residues. The possible initial conformations were optimized at the generalized gradient approximation (GGA) level, with spin unrestricted approach, symmetric unrestriction, doublet multiplicity and BLYP/DND methods. For all initial complexes considered, the Cu²⁺ was completed with H₂O and/or OH⁻ groups to neutralize the initial complexes with hexacoordination geometries. The tendency of ligands to coordinate with Cu²⁺ is NH₂ > C₃OH > H₂O > NHCOCH₃, suggesting that amine groups (NH₂) on chitosan prefer to bind Cu²⁺ and acetamide groups (NHCOCH₃) on chitin lose their coordination with Cu²⁺ in aqueous solution. The geometries of bridge and pendant models have been comparatively analyzed. The results show that bridge model is more favorable than pendant model. In terms of the optimized geometries, the initial hexacoordination structures of Cu²⁺ designed seem more reasonable than initial tetracoordination ones designed.     

Concomitant polymorphism of an antiferromagnetically coupled dicopper(II,II) complex with single strand helical assembly: Synthesis,structure, DSC,magnetic and heterogeneous catalytic studies

Two concomitant polymorphic coordination complexes (dark blue – I and black – II) with the formula (Cu₂C₄₄H₆₀N₄O₄) have been synthesized and characterized crystallographically. Magnetic measurements show the presence of a strong antiferromagnetic interaction and the 2J value corresponds extremely well to the theoretically calculated one, indicating the fact that it follows nicely the magneto-structural relationship. Immobilization of the copper(II) complex 1 on a 2D-hexagonal mesoporous silica showed good catalytic efficiency in the liquid phase partial oxidation of olefins in the presence of TBHP as an oxidant.     

Synthesis,characterization and catalytic oxidation of cyclohexene with molecular oxygen over host (nanopores of zeolite-Y)/guest ([Ni([R]2-N2X2)]2+ (R = H,CH3; X = NH,O, S) nanocatalyst

Nickel(II) complexes of 12-membered macrocyclic ligands with different donating atoms (N₂O₂, N₂S₂ and N₄) in the macrocyclic ring have been encapsulated in the nanocavity of zeolite-Y by the fexible-ligand method. Nickel(II) complexes with macrocyclic ligands were entrapped in the nanocavity of zeolite-Y by a two-step process in the liquid phase: (i) adsorption of precursor ligand; 1,2-di(o-aminophenyl-, amino, oxo, thio)ethane, N₂X₂; in the supercages of the Ni(II)–NaY, and (ii) in situ condensation of the Ni(II) precursor complex; [Ni(N₂X₂)]²⁺; with glyoxal or biacetyl. The new host–guest nanocatalysts (HGNM), [Ni([R]₂-N₂X₂)]²⁺–NaY (R = H, CH₃; X = NH, O, S), have been characterized by FT-IR, DRS and UV–Vis spectroscopic techniques, XRD and elemental analysis, as well as nitrogen adsorption, and were used for oxidation of cyclohexene with molecular oxygen.     

Flow-injection chemiluminescence simultaneous determination of cobalt(II) and copper(II) using partial least squares calibration

A flow-injection chemiluminescence (CL) system is proposed for simultaneous determination of Co²⁺ and Cu²⁺ using partial least squares (PLS) calibration. This method is based on the fact that both Co²⁺ and Cu²⁺ catalyse the CL reaction of luminol-H₂O₂, and that their kinetic characteristics of Co²⁺ and Cu²⁺ are significantly different in the luminol-H₂O₂ system. The CL intensity was measured and recorder at different reaction times of luminol-H₂O₂Co²⁺Cu²⁺, and the obtained data were processed by the chemometric approach of partial least squares. The experimental calibration set was composed of 16 sample solutions using an orthogonal calibration design for two component mixtures. The proposed method offers the potential advantages of high sensitivity, simplicity and rapidity for Co²⁺ and Cu²⁺ determination, and was successfully applied to the simultaneous determination of both analytes in real water sample. The present paper demonstrated that the simultaneous determination of two metal ions without any prior separation has been possible using flow-injection CL system.     

Effective oxidation of benzylic and aliphatic alcohols with hydrogen peroxide catalyzed by a manganese(III) Schiff-base complex under solvent-free conditions

A variety of alcohols were oxidized efficiently into the corresponding ketones and carboxylic acids in excellent yields with hydrogen peroxide using a manganese(III) Schiff-base complex as a catalyst under solvent-free and mild conditions. The oxidation procedure is very simple and the products are easily isolated in excellent yields.     

Host (nanopores of zeolite-Y)/guest (Co(II)-azamacrocyclic complexes) nanocomposite materials: synthesis,characterization and catalytic epoxidation of styrene with molecular oxygen

A series of Co(II) azamacrocyclic complexes, 12 Brunel, D, Bellocq, N, Sutra, P, Cauvel, A, Lasperas, M, Moreau, P, Di Renzo, F, Galarneau, A and Fajula, F. 1998. Coord. Chem. Rev., 178–180: 1085[Crossref], [Web of Science ®] , [Google Scholar]aneN₄, 14 De Vos, DE, Dams, M, Sels, BF and Jacobs, PA. 2002. Chem. Rev., 102: 3615[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]aneN₄, Bzo₂ 12 Brunel, D, Bellocq, N, Sutra, P, Cauvel, A, Lasperas, M, Moreau, P, Di Renzo, F, Galarneau, A and Fajula, F. 1998. Coord. Chem. Rev., 178–180: 1085[Crossref], [Web of Science ®] , [Google Scholar]aneN₄ and Bzo₂ 14 De Vos, DE, Dams, M, Sels, BF and Jacobs, PA. 2002. Chem. Rev., 102: 3615[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]aneN₄, have been encapsulated in the nanocavity of zeolite-Y by a one pot template condensation reaction. Co(II) complexes with azamacrocyclic ligands were entrapped in the nanocavity of zeolite-Y by a two-step process in the liquid phase: (i) adsorption of [bis(diamine)cobalt(II)], [Co(N–N)₂]-NaY, in the supercages of the zeolite, and (ii) in situ condensation of the cobalt(II) precursor complex with diethyloxalate. The new host/guest nanocomposite materials (HGNM) have been characterized by FTIR, DRS and UV-Vis spectroscopic techniques, XRD and elemental analysis, as well as nitrogen adsorption. These complexes (neat and HGNM) were used for epoxidation of styrene with O₂ as oxidant in different solvents. Electronic spectra of the reaction mixture indicated oxidation proceeds through a free radical mechanism.     

Micelle-Catalyzed Interaction Between [Ni(II)-Gly-Gly]+ and Ninhydrin

The effect of cationic micelles of cetyltrimethyl ammonium bromide (CTAB) on the observed pseudo-first-order rate constant for the interaction of nickel dipeptide complex [Ni(II)-Gly-Gly]⁺ with ninhydrin has been studied spectrophotometrically. At constant temperature and pH, increase in the [CTAB] from 0.0 to 60.0 × 10^?3 mol dm^?3 caused nearly three-fold increase of the rate constant. The micellar catalysis is explained in terms of the pseudophase model. From the observed kinetic data, binding constants of micelle–[Ni(II)-Gly-Gly]⁺ (K _S), and micelle–ninhydrin (K _N) are evaluated, respectively, to be 5.3 mol^?1 dm³ and 84.0 mol^?1 dm³. The role of added inorganic (NaCl, NaBr, Na₂SO₄) and organic salts (NaBenz, NaSal) on the reaction rate has also been examined.     

Homo‐ and copolymerization of norbornene with styrene catalyzed by a series of copper(II) complexes in the presence of methylaluminoxane

Vinyl‐type polymerization of norbornene as well as random copolymerization of norbornene with styrene was studied using a series of copper complexes‐MAO. The precatalysts used here are copper complexes with β‐ketoamine ligands based on pyrazolone derivatives and the molecular structure of complex 4 was determined using X‐ray analysis. All of these catalyst systems are moderately active for the vinyl‐type polymerization of norbornene and random copolymerization of norbornene with styrene. The random copolymers obtained suggest that only one type of active species is present. Gel permeation chromatography (GPC) and NMR indicate that the copolymers are ‘true’ copolymers. The copolymerization reactivity ratios (r_NBE = 20.11 and r_Sty = 0.035) indicate a much higher reactivity of norbornene, which suggests a coordination polymerization mechanism. The solubility and processability of the copolymers are improved relative to polynorbornene and the thermostability of the copolymers is improved relative to polystyrene. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis, crystal structure, spectroscopy and magnetic properties of a dinuclear Cu complex with 3,5-bis(2-pyridyl)pyrazole bridging ligand

A dinuclear Cu^II complex [Cu₂(bpp)₂(H₂O)₂](ClO₄)₂ (1) with 3,5-bis(2-pyridyl)pyrazole (Hbpp), has been synthesized and characterized by elemental analyses, thermal analysis, conductance, UV-vis and IR spectra. The crystal structure of 1, determined by X-ray diffraction technique, reveals that two centrosymmetric Cu^II centers are bridged by a pair of tetradentate anionic bpp ligands, adopting a square-pyramidal environment with the water ligand occupying the axial site. An interesting feature of this structure is the formation of a two-dimensional supramolecular network through O-H?O hydrogen bonds between the water moieties of the cationic [Cu₂(bpp)₂(H₂O)₂]²⁺ subunits and perchlorate anions. The magnetic properties of 1 have been investigated by variable-temperature magnetic susceptibility and EPR measurements. Very strong antiferromagnetic interaction between the Cu^II centers (with H=−JS₁S₂, J=−368.3 cm⁻¹) has been observed, and the magneto-structural correlations was analyzed.