POLYROTAXANE WITH π-CONJUGATED PORPHYRIN AND POLYAZOMETHINE SYSTEMS PREPARED FROM A TYPE OF PORPHYRIN-DIALDEHYDE AND COMPLEX OF β-CYCLODEXTRIN WITH 1,4-PHENYLENEDIAMINE

The synthesis of 5,15-bis[4-(methoxycarbonyl)phenyl]-10,20-diphenylporphyrin (2) and its reduction to 5,15-bis[4-(hydroxymethyl)phenyl]-10,20-diphenylporphyrin (3), and so its oxidation to provide 5,15-bis(4-formylphenyl)-10,20-diphenylporphyrin (4) are reported. The copolymer possessing β-cyclodextrin (β-CD), π-conjugated porphyrin and polyazomethine systems was synthesized by the polycondensation of porphyrin-dialdehyde monomer (4) and β-cyclodextrin/1,4-phenylenediamine complex (5). The monomers and the copolymer were characterized by UV-Vis, 1H-NMR and IR spectra. Furthermore, 1H-NMR and FT-IR spectra confirmed locating the aromatic ring of 1,4-phenylenediamine molecule in the center of β-cyclodextrin cavity.     

The synthesis and proton nuclear magnetic resonance study of some nitro- and amino-unsymmetrically meta-substituted tetraphenylporphyrins

Procedures for the synthesis of new partially-substituted mesotetraphenylporphyrins (TPP's) are described. The 5-(3-nitrophenyl)-10,15,20-triphenylporphyrin is the primary product from a 1:2:3 molar ratio of m-nitrobenzaldehyde, benzaldehyde and pyrrole. The crude reaction product also contained TPP, 5,10-bis-(3-nitrophenyl)-15,20-diphenylporphyrin, 5,15-bis(3-nitrophenyl)-10,20-diphenylporphyrin, and 5,10,15-tris-(3-nitrophenyl)-20-phenylporphyrin. The crude mixture of m-nitrophenylporphyrins was reduced to a mixture of the corresponding amino derivatives, which was separated into TPP, 5-(3-aminophenyl)-10,15,20-triphenylporphyrin, 5,10-bis(3-aminophenyl)-15,20-diphenylporphyrin, and 5,15-bis(3-aminophenyl)-10,20-diphenylporphyrin. The products were characterized by uv-visible and ir spectrophotometry, and by high resolution nmr spectroscopy and mass spectroscopy.     

3-Cyclobutenyl-1,2-dione-substituted porphyrins. A general and efficient entry to porphyrin-quinone and quinone-porphyrin-quinone architectures

A new and efficient synthesis of meso-linked porphyrin-quinone dyads and quinone-porphyrin-quinone triads has been developed via the intermediacy of porphyrins bearing 3-cyclobutenyl-1,2-dione and 3-(1-ethenyl)cyclobutenyl-1,2-dione substituents at one or two nonadjacent meso-positions. The free-base porphyrins 5-bromo-10,20-diphenylporphyrin and 5,15-dibromo-10,20-diphenylporphyrin undergo facile palladium-catalyzed Stille coupling with 3-isopropoxy-2-tri-n-butylstannyl-cyclobutene-1,2-dione to produce the corresponding mono- and bis(3-cyclobutenyl-1,2-dione)-substituted porphyrins in good yields. In contrast, the zinc bromoporphyrins reacted with the same tin reagent only slowly and with the formation of side products. The free-base bromoporphyrins also were coupled with tri-n-butylvinyltin to afford vinylporphyrins in very good yields. 5,15-Diphenyl-10-vinylporphyrin was converted into trans-bromovinylporphyrin, which underwent facile Stille coupling with 3-isopropoxy-2-tri-n-butylstannylcyclobutene-1,2-dione to afford the vinylogous 3-cyclobutenyl-1,2-dione-substituted porphyrin. The molecular structure of 5,15-bis(3-cyclobutenyl-1,2-dione)-10,20-diphenylporphyrin(Z n) was determined by X-ray crystallography. Although the data revealed a fairly large dihedral angle between the cyclobutenedione and the porphyrin rings (57 degrees), the UV-vis spectra of both the mono- and bis(3-cyclobutenyl-1,2-dione)-substituted porphyrins showed B- and Q-band red shifts indicative of strong electronic coupling between the porphyrin and cyclobutenedione chromophores in solution. Introduction of a double bond between the cyclobutenedione and porphyrin rings resulted in a significant red shift of both the B- and Q-bands compared to those of the nonvinylogous system. All porphyrinic cyclobutenediones were metalated with zinc and then, using established cyclobutenedione chemistry, converted into a variety of porphyrin-quinones in excellent yields with aryllithium and vinylic Grignard reagents. From the mono(3-cyclobutenyl-1,2-dione)-substituted porphyrin, 7, a variety of directly linked monoquinone-porphyrin dyads were easily synthesized. Substituents could also be introduced at the free meso-position of 7 by bromination followed by palladium-catalyzed cross-coupling reactions, and additional porphyrinic monoquinones were then prepared from these starting materials. The vinylogous squarylporphyrin was converted into a double bond linked porphyrin-quinone via reaction with phenyllithium followed by thermal rearrangement and oxidation. As a result of the hindered rotation around the C-C bond between the porphyrin and the quinone, pairs of stable, separable, and thermally interconvertable atropisomers of porphyrin-quinones were obtained from 5,15-bis(3-cyclobutenyl-1,2-dione)-10,20-diphenylporphyrin(Z n). The structure of one of the atropisomers was determined by X-ray crystallography.     

Rational synthesis of meso- or beta- fluoroalkylporphyrin derivatives via halo-fluoroalkylporphyrin precursors: electronic and steric effects on regioselective electrophilic substitution in 5-fluoroalkyl-10,20-diarylporphyrins

[reaction: see text] Electrophilic nitration, formylation or bromination of metalated 5-fluoroalkyl-10,20-diphenylporphyrin (fluoroalkyl = CF3, ClCF2CF2, n-C6F13) proceeded with high regioselectivity, exclusively affording corresponding meso-substituted porphyrins, while the iodination reaction mainly took place at the adjacent beta site giving 2-iodo-10-fluoroalkyl-5,15-diphenylporphyrin. Suzuki, Sonogashira, and trifluoromethylation reactions of the obtained 5-bromo-15-fluoroalkyl-10,20-diphenylporphyrins or 2-iodo-10-fluoroalkyl-5,15-diphenylporphyrins could perform smoothly to give the corresponding various meso- or beta-functionalized fluoroalkylated porphyrin derivatives. Accordingly, two meso-to-meso butadiyne-bridged bisporphyrin dimers and two beta-to-beta butadiyne-linked dimeric porphyrins were prepared by the coupling reactions of 5-ethynyl-15-fluoroalkyl-10,20-diphenylporphyrins and 2-ethynyl-10-fluoroalkyl-5,15-diphenylporphyrins, respectively.     

Coordination polymers derived from gallium and zinc metal–metal bonded species

The reaction of (dpp-bian)Ga–Zn(dpp-bian) (dpp-bian is 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene) with 1,3-di(4-pyridyl)propane results in 1D coordination polymer [(dpp-bian)Ga–Zn(dpp-bian)(μ²-1,3-Py₂(CH₂)₃)]_n with the retained Ga–Zn bond. In contrast, the coordination of 1,3-di(4-pyridyl)propane to Zn atoms in the (dpp-bian)Zn–Zn(dpp-bian) complex induces the cleavage of the Zn–Zn bond which is accompanied by reduction of dpp-bian radical anions to dianions. The reaction product represents 1D coordination polymer [{(dpp-bian)Zn}(μ²-1,3-Py₂(CH₂)₃)]_n.     

Influence of TiO2 impregnated with a novel copper(II) carboxylic porphyrin and its application in photocatalytic degradation of 4-Nitrophenol

A novel 5,15-di-[4-carboxylatomethoxy]phenyl-10,20-diphenylporphyrin, its copper complex and the corresponding metalloporphyrin-TiO₂ photocatalyst were synthesized and characterized by DRS, SEM, XRD, and FT–IR. The photocatalytic effects of anataseTiO₂ impregnated with this copper(II) porphyrin was investigated by photodegradation of 4-nitrophenol(4-NP) in aqueous solution under Xenon lamp irradiation. The results indicated that the photoactivity of copper(II) porphyrin-TiO₂ composite was evidently enhanced by the interaction between carboxyl of the porphyrin molecule and hydroxyls anchored on the TiO₂. Futhermore, the copper(II) carboxylic porphyrin displayed good adsorption behavior and activity of the dye-sensized TiO₂ system.     

General synthesis of meso-amidoporphyrins via palladium-catalyzed amidation

A series of meso-amidoporphyrins were facilely synthesized by direct reactions of meso-brominated porphyrins with amides via palladium-catalyzed amidation reaction. Using a combination of palladium precursor Pd(OAc)(2) or Pd(2)(dba)(3) and phosphine ligand Xantphos, both 5-bromo-10,20-diphenylporphyrin and 5,15-dibromo-10,20-diphenylporphyrin, as well as their zinc complexes, can be effectively coupled with a wide variety of amides to give the corresponding mono- and bis-substituted meso-amidoporphyrins in high yields under mild conditions. [reaction: see text]     

Convergent synthesis of meso-ferrocenyl porphyrins for TiO2 sensitization

Electron-donating ferrocenyl moieties have been incorporated into supramolecular carboxyporphyrin architectures Zn(II)-5-ferrocenyl-10,20-bistolyl-15-(4-methylbenzoate)porphyrin (trans-Fc-ZnP-CO₂Me), Zn(II)-5-ferrocenyl-10,15,20-tris(4-methylbenzoate)porphyrin [trans-Fc-ZnP-(CO₂Me)₃], and Zn(II)-5,15-bisferrocenyl-10,20-bis(4-benzoate)porphyrin [trans-Fc₂-ZnP-(CO₂Me)₂] for self-assembly on metal oxide nanoparticles. Efficient and economic synthesis has required a convergent strategy toward reduced symmetry trans-A₂B₂ and trans-AB₂C substitution patterns about the porphyrin macrocycle minimizing the production of porphyrin side products and increasing yields of the target ferrocenylporphyrins. Preliminary spectroscopic data in solution and in the solid state bound to mesoporous TiO₂ films are discussed.     

Self-Assembled Nanomaterials Based on Complementary Sn(IV) and Zn(II)-Porphyrins,and Their Photocatalytic Degradation for Rhodamine B Dye

A series of porphyrin triads (1–6), based on the reaction of trans-dihydroxo-[5,15-bis(3-pyridyl)-10,20-bis(phenyl)porphyrinato]tin(IV) (SnP) with six different phenoxy Zn(II)-porphyrins (ZnLⁿ), was synthesized. The cooperative metal–ligand coordination of 3-pyridyl nitrogens in the SnP with the phenoxy Zn(II)-porphyrins, followed by the self-assembly process, leads to the formation of nanostructures. The red-shifts and remarkable broadening of the absorption bands in the UV–vis spectra for the triads in CHCl₃ indicate that nanoaggregates may be produced in the self-assembly process of these triads. The emission intensities of the triads were also significantly reduced due to the aggregation. Microscopic analyses of the nanostructures of the triads reveal differences due to the different substituents on the axial Zn(II)-porphyrin moieties. All these nanomaterials exhibited efficient photocatalytic performances in the degradation of rhodamine B (RhB) dye under visible light irradiation, and the degradation efficiencies of RhB in aqueous solution were observed to be 72~95% within 4 h. In addition, the efficiency of the catalyst was not impaired, showing excellent recyclability even after being applied for the degradation of RhB in up to five cycles.     

Localization and photodynamic efficacy of two cationic porphyrins varying in charge distributions

Two meso-tetraphenylporphyrin derivatives bearing adjacent: 5,10-di[4-(N-trimethylaminophenyl)-15,20-diphenylporphyrin (DADP-a) or opposite: 5,15-di[4-(N-trimethylaminophenyl)-10,20-diphenylporphyrin (DADP-o) cationic-N-(CH3)3+ groups on two of the para-phenyl positions were examined with regard to photodynamic properties as a function of charge distribution. The two adjacent positive charges in the DADP-a structure result in a molecular distortion (asymmetry), likely from electrostatic repulsion. This could be responsible for the unusual interaction of this compound with some solvents and detergent micelles. In contrast, DADP-o is a much more symmetric molecule. In a cellular environment, fluorescence spectra of the two agents were essentially identical. Subcellular localization played a major role in photodynamic efficacy. DADP-a localized in mitochondria, and irradiation of photosensitized cells (640-650 nm) resulted in a rapid loss of the mitochondrial membrane potential (delta(psi)m), usually a prelude to apoptotic cell death. In contrast, DADP-o localized in lysosomes, and extensive lysosomal photodamage was observed after irradiation. Both steady-state accumulation levels and absorbance spectra favored DADP-o, but the light dose required for a 90% cell kill was two-fold greater for DADP-o than for DADP-a, at a constant extracellular sensitizer concentration. These data indicate that, on a photons/cell basis, DADP-a was five-fold more efficacious. Fluorescence emission spectra in different solvents and detergents demonstrated a tendency for DADP-a association. We interpret these results to indicate partition of both drugs to membrane loci, with mitochondriabeing the more lethal site for photodamage.     

Structures and properties of novel 5,15-di[4-(5-acetylsulfanylpentyloxy)phenyl] porphyrin derivatives: Density functional theory calculations

Density functional theory (DFT) calculations have been carried out in order to compare the molecular structures, atomic charges, molecular orbitals, electronic absorption spectra, and infrared (IR) spectra of the metal-free 5,15 -di[4-(5-acetylsulfanylpentyloxy) phenyl]porphyrin H₂[DPP(OC₅H₁₀SCOCH₃)₂] (1) (DPP = 5,15-diphenylporphyrin) and its zinc complex Zn[DPP(OC₅H₁₀SCOCH₃)₂] (2), which exhibit novel structures with two 5-acetylsulfanylpentyloxy side chains at the para-positions of opposite meso-attached phenyl groups. The calculated molecular structure and electronic absorption and IR spectra of 1 and 2 are consistent with the experimental results. The influences of meso-substitution, polar solvents, and central metal substitution on the structure and properties of porphyrin derivatives have been investigated by comparing the corresponding data for 1 and 2 with the help of data for the unsubstituted porphyrin derivatives, namely the metal-free porphyrin H₂Por (3) and the porphyrinato-zinc compound (4). The identities of the main transitions in the electronic absorption spectra of 1 and 2 are assigned and the vibrational modes in their IR spectra are identified with the assistance of animated pictures produced based on normal coordinates. The theoretical work presented here will be helpful in increasing our understanding of the structure and spectroscopic properties, as well as substituent and solvent effects, for these novel porphyrin compounds.     

Metalloporphyrins as chemical shift reagents: the unambiguous NMR characterization of the cis- and trans-isomers of meso-(bis)-4′-pyridyl-(bis)-4′-carboxymethylphenylporphyrins

The condensation of pyrrole with 4-pyridylcarboxyaldehyde and methyl 4-formyl benzoate under Adler-Longo conditions yielded the series of meso-(4′-pyridyl)/(4′-carboxymethylphenyl)porphyrins as a mixture. Careful column chromatography afforded each isomer in pure form. In this paper we focus on the two bis-substituted isomeric meso-porphyrins, 5,10-bis(4′-pyridyl)-15,20-bis(4′-carboxymethylphenyl)porphyrin and 5,15-bis(4′-pyridyl)-10,20-bis(4′-carboxymethylphenyl)porphyrin, respectively, 4′-cis and 4′-transDPyDMeP. The assignment of the geometry of the two isomers was performed by ¹H NMR spectroscopy on the trinuclear adducts [(4′-cisDPyDMeP){Ru(TPP)(CO)}₂] and [(4′-transDPyDMeP){Ru(TPP)(CO)}₂], obtained by selective coordination of [Ru(TPP)(CO)(EtOH)] (TPP=tetraphenylporphyrin) to the peripheral nitrogen atoms. The axially bound ruthenium porphyrins act as chemical shift reagents on the central porphyrin, allowing a clear distinction of the pyrrole proton resonances and consequent unambiguous assignment of the geometry of each isomer based upon symmetry considerations.     

2D Porphyrinic Metal-Organic Frameworks Featuring Rod-Shaped Secondary Building Units

Metal-organic frameworks (MOFs) encompass a rapidly expanding class of materials with diverse potential applications including gas storage, molecular separation, sensing and catalysis. So-called ‘rod MOFs’, which comprise infinitely extended 1D secondary building units (SBUs), represent an underexplored subclass of MOF. Further, porphyrins are considered privileged ligands for MOF synthesis due to their tunable redox and photophysical properties. In this study, the Cu^II complex of 5,15-bis(4-carboxyphenyl)-10,20-diphenylporphyrin (H₂L-Cu^II, where H₂ refers to the ligand’s carboxyl H atoms) is used to prepare two new 2D porphyrinic rod MOFs PROD-1 and PROD-2. Single-crystal X-ray analysis reveals that these frameworks feature 1D Mn^II- or Co^II-based rod-like SBUs that are coordinated by labile solvent molecules and photoactive porphyrin moieties. Both materials were characterised using infrared (IR) spectroscopy, powder X-ray diffraction (PXRD) spectroscopy and thermogravimetric analysis (TGA). The structural attributes of PROD-1 and PROD-2 render them promising materials for future photocatalytic investigations.     

Energy migration in a self-assembled nonameric porphyrinic molecular box

We describe the construction of self-assembled double-decker porphyrin arrays built up from two covalently connected trimeric Zn-porphyrin units that are joined together by metal-coordination bonds with diamine ligands. We used three different types of diamine ligands: 1,4-diaza[2.2.2]bicyclooctane (DABCO), 4,4'-bipyridine (BIPY), and 5,15-bis(4-pyridyl)-10,20-diphenylporphyrin (DPYP). The ligands act as pillars, through two axial coordination bonds with the porphyrinic Zn(II) ions, to block the planes of the porphyrin units in an almost cofacial orientation and inducing the formation of a trigonal prismatic structure. The spectroscopic and photophysical properties of the Zn-trisporphyrin component were determined as well as those of the resulting multimolecular cagelike assemblies. The double-decker assembly with DPYP as the pillars constitutes a nonameric porphyrin aggregate. Although this assembly is thermodynamically less stable than those containing DABCO or BIPY, efficient photoinduced energy transfer occurs (96% yield) from the trisporphyrin base units to the DPYP side walls. The rate of the energy-transfer process is in good agreement with that calculated for a dipole-dipole (F?rster) mechanism corrected for the unfavorable orientation geometry of the donor and the axially bound acceptor.     

Linked porphyrin systems

Porphyrin monomers, 5-(monopyridyl)-10,15,20-(triphenyl)porphyrin ( 1 ), 5,10-(dipyridyl)-15,20-(diphenyl)-porphyrin ( 2 ), and 5,15-(dipyridyl)-10,20-{diphenyl)porphyrin ( 3 ), were linked by hydrocarbon chains to form a series of dimers, trimers and polymers. The 5-(monopyridyl)-10,15,20-(triphenyl)porphyrin monomers were linked by 2, 4, 6, 8 and 10 carbon chains through the alkylation of the pyridine nitrogens using the appropriate diiodoalkane to form positively charged linked dimers 4–8 . A trimer 12 was synthesized from two 5-(monopyridyl)-10,15,20-(triphenyl)porphyrin and one 5,10-(dipyridyl)-15,20-(diphenyl)porphyrin linked by a six carbon chain. Hydrocarbon linked (5,10-(dipyridyl)-15,20-(diphenyl)porphyrin)_n ( 13 ) and (5,15-(dipyridyl)-10,20-(diphenyl)porphyrin)_n ( 14 ) were also prepared.     

Synthesis of 2-phenyl-1,3-di(4-pyridyl)naphthvalene by photoinduced reversible valence isomerization of 2-phenyl-1,3-di(4-pyridyl)naphthalene

2-Phenyl-1,3-di(4-pyridyl)naphthvalene 3a was synthesized by the photoinduced reversible valence isomerization of 2-phenyl-1,3-di(4-pyridyl)naphthalene 2a. Then, 3a was converted into 3-phenyl-1,2-di(4-pyridyl)naphthalene 4a and 2a simultaneously. The t_1/2 of 3a in DMSO-d₆ at 90 °C was 2 h, while that at 110 °C was approximately 10 min.     

Photocurrent generation in multilayer organic-inorganic thin films with cascade energy architectures

Zirconium organobisphosphonate multilayer thin films of viologen derivatives were grown on copper dithiolate multilayers of 5,15-di(p-thiolphenyl)-10,20-di(p-tolyl)porphyrin (POR) and 5,15-di(p-thiolphenyl)-10,20-di(p-tolyl)porphyrinzinc (ZOR) on a variety of substrates (e.g. Au, SiO(2)), using solution depositions methods. The multilayer structures were studied by atomic force microscopy, UV-vis spectroscopy, and ellipsometry. In the case of copper dithiolate thin films, layer-by-layer lamellar growth with low surface roughness resulted, while higher surface roughness was observed in the growth of Zr viologen bisphosphonate films. Gold electrodes modified with zirconium bisphosphonate multilayers of viologen on top of copper dithiolate multilayers of porphyrin derivatives (ZOR or POR) were photoelectroactive and produced efficient and stable photocurrents using visible light. By arranging the zinc-porphyrin (ZOR) and the free base porphyrin (POR) donors in an energetically favorable fashion, according to their redox potentials and optical energy gaps, the photoinduced charge separation was improved, and higher photocurrent quantum yields ( approximately 4%) and fill factor ( approximately 50%) of the photoelectrode were achieved.     

Decoupling optical and potentiometric band gaps in pi-conjugated materials

Syntheses, optical spectroscopy, potentiometric studies, and electronic structural calculations are reported for two classes of conjugated (porphinato)metal oligomers that feature a meso-to-meso ethyne-bridged linkage topology. One set of these systems, bis[(5,5'-10,20-bis[3,5-bis(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]ethyne (DD), 5,15-bis[[5'-10',20'-bis[3,5-di(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]ethynyl]-10,20-bis[3,5-di(9-methoxy-1,4,7-trioxanonyl)phenyl]porphinato)zinc(II) (DDD), and 5,15-bis[[15' '-(5'-10',20'-bis[3,5-bis(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]-[(5' '-10' ',20' '-bis[3,5-di(9-methoxy-1,4,7-trioxanonyl)phenyl]porphinato)zinc(II)]ethyne]ethynyl]-10,20-bis[3,5-di(9-methoxy-1,4,7-trioxanonyl)phenyl]porphinato)zinc(II) (DDDDD), constitute highly soluble analogues of previously studied examples of this structural motif having simple 10,20-diaryl substituents, while a corresponding set of conjugated oligomers, [(5-10,20-bis[3,5-bis(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]-[(5'-15'-ethynyl-10',20'-bis[10,20-bis(heptafluoropropyl)porphinato)zinc(II)]ethyne (DA), 5,15-bis[[5'-10',20'-bis[3,5-di(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]ethynyl]-10,20-bis(heptafluoropropyl)porphinato]zinc(II) (DAD), and 5,15-bis[[15' '-(5'-10',20'-bis[3,5-bis(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]-[(5' '-(10' ',20' '-bis(heptafluoropropyl)porphinato)zinc(II)]ethyne]ethynyl]-10,20-bis[3,5-di(9-methoxy-1,4,7-trioxanonyl)phenyl]porphinato)zinc(II) (DADAD), features alternating electron-rich and electron-poor (porphinato)zinc(II) units. Electrooptic and computational data for these species demonstrate that it is possible to engineer conjugated oligomeric structures that possess highly delocalized singlet (S1) excited states yet manifest apparent one-electron oxidation and reduction potentials (E1/20/+ and E1/2-/0 values) that are essentially invariant with respect to those elucidated for their constituent monomeric precursors.     

A facile synthesis and properties of quinone from a polyvalent porphyrin,tetrakis(3,5-di-tert-butyl-4-hydroxyphenyl)phorphyrin

The quinone 5,15-di-(3,5-di-tert-butyl-4-hydroxyphenyl)-10,20-di-(3,5-di-tert-butyl-4-quinomethane)porpho-10,20-dimethene (2) was obtained in high yield by the oxidation of the polyvalent porphyrin tetrakis(3,5-ditert-butyl-4-hydroxyphenyl)phorphyrin (1) with an Mn²⁺-O₂ system in dimethylformamide. 2 was reduced to 1 by ascorbic acid or hydroquinone.     

Intermolecular π‐stacking and F...F interactions of fluorine‐substituted meso‐alkynylporphyrin

Two C2‐symmetric meso‐alkynylporphyrins, namely 5,15‐bis[(4‐butyl‐2,3,5,6‐tetrafluorophenyl)ethynyl]‐10,20‐dipropylporphyrin, C₅₀H₄₂F₈N₄, (I), and 5,15‐bis[(4‐butylphenyl)ethynyl]‐10,20‐dipropylporphyrin, C₅₀H₅₀N₄, (II), show remarkable π–π stacking that forms columns of porphyrin centers. The tetrafluorophenylene moieties in (I) show intermolecular interactions with each other through the F atoms, forming one‐dimensional ribbons. No significant π–π interactions are observed in the plane of the phenylene and tetrafluorophenylene moieties in either (I) or (II). The molecules of both compounds lie about inversion centers.