Synthesis,Crystal Structure and Characterization of a new Protonated Magnesium Borophosphate: (H3O)Mg(H2O)2[BP2O8]·H2O

A new protonated borophosphate (H₃O)Mg(H₂O)₂[BP₂O₈]·H₂O ( 1 ) was synthesized under mild hydrothermal conditions and characterized by single‐crystal X‐ray diffraction, FTIR spectroscopy and TG‐DTA. The compound crystallizes in the hexagonal system, space group P6(1)22 (No 178), a = 9.4462(7) Å, c = 15.759(2) Å, V = 1217.8(2) Å³, and Z = 6. There exist infinite helical $^1_\infty$ {[BP₂O₈]^3–} ribbons built up from corner‐sharing PO₄ and BO₄ tetrahedra, which are connected by MgO₄(H₂O)₂ leading to an infinite three‐dimensional open‐framework. The H₃O⁺ ions are located at the free thread of the helical ribbons, whereas crystallized water occupy the channels of the helical ribbons. The dehydration of the compound occurs at a higher temperature which is presumably due to the anisotropic hydrogen bonds in the crystal structure. The luminescent properties of the compound were studied.     

Hydrogen‐Bond‐Based Magnetic Exchange Between μ‐Diethylnicotinamide(aqua)bis(X‐salicylato)copper(II) Polymeric Chains

Polymeric salicylatocopper(II) complexes of unusual composition [C u(X‐ sal)₂( μ‐denia)(H₂O)]_n [denia = diethylnicotinamide, and X‐sal = 5‐methylsalicylate ( 1 ), 3‐methylsalicylate ( 2 ), 4‐methoxysalicylate ( 3 ), 3,5‐dichlorosalicylate ( 4 ) and 3,5‐dibromosalicylate ( 5 )] were synthesized and characterized. Magnetic measurements were performed in the temperature range 1.8–300 K. The structural unit of all complexes consists of a Cu^II atom, which is monodentately coordinated by the pair of X‐salicylate anions in trans positions. Water and the diethylnicotinamide ligand occupy the other two basal plane positions of the tetragonal pyramid. The axial positions are occupied by a diethylnicotinamide oxygen atom of neighboring structural units, thus forming a spiral polymeric structure parallel to b axis. Magnetic measurements showed that all complexes 1 – 5 exhibit a susceptibility maximum at about 6–8 K. The obtained data fit to Bleaney–Bowers equation gave singlet‐triplet energy gaps 2J = –8.60 cm^–1 for 1 , 2J = –6.57 cm^–1 for 2 , 2J = –8.57 cm^–1 for 3 , 2J = –6.82 cm^–1 for 4 , and 2J = –6.45 cm^–1 for 5 . The supramolecular structure based on hydrogen bonds [described by supramolecular synthons R₂²(10) and R₂²(12)] is the pathway for antiferromagnetic interactions of the magnetically coupled pairs of copper atoms of neighboring chains within the 2D supramolecular layers. The results of the magnetic measurements suggest involvement of the COO groups in the magnetic interaction pathway for all five complexes.     

Novel supramolecular compounds with three-dimensional hydrogen-bonded network [M(H2O)6][H2L] (H4L=1,2,4,5-benzenetetracarboxylic acid, M=Mn and Co): syntheses, characterization and crystal structures

Two hydrogen-bonded supramolecular compounds having the general formula [M(H₂O)₆][H₂L] (M=Mn^II or Co^II and H₄L=1,2,4,5-benzenetetracarboxylic acid), have been newly prepared by the reaction of [M(H₂O)₆](ClO₄)₂ and [C₆H₂(COOH)₄] (H₄L), and structurally characterized by X-ray diffraction. The metal center in each compound is six-coordinated, forming an ideal octahedral geometry. Both neutral formula units make unique three-dimensional supramolecular architectures through hydrogen bonds and stabilized by electrostatic force.     

Thermal analysis of bis(tetraethylammonium) tetrachloroferrate(II)

Thermal decomposition of bis(tetraethylammonium) tetrachloroferrate(II) has been studied using the TG-FTIR, TG–MS and DTA techniques. The measurements were carried out in an inert atmosphere over the temperature range of 293–1073 K. The solid products of the thermal decomposition were identified by the FT-FIR, Mössbauer spectroscopy as well as the X-ray powder diffractometry. The influence of the oxidation state and the nature of a metal on thermal transformation profiles of analogous complexes have been discussed.     

Syntheses and Structural Characterization of Two Nitrilotriacetate Cobalt Complexes: [{CoK2(NTA)(Hmta)(H2O)3}NO3]n and [{Co(4,4′‐bpy)2(H2O)4}{Co2(NTA)2(4,4′‐bpy)(H2O)2}]

Two nitrilotriacetate cobalt complexes {[CoK₂(NTA)(Hmta)(H₂O)₃]NO₃}_n ( 1 ) and [{Co(4,4′‐bpy)₂(H₂O)₄}{Co₂(NTA)₂(4,4′‐bpy)(H₂O)₂}] ( 2 ) (NTA = nitrilotriacetate anion, Hmta = hexamethylenetetramine and 4,4′‐bpy = 4,4′‐bipyridine) were prepared and characterized by IR, elemental analysis and single crystal X‐ray diffraction study. The influence of the neutral ancillary ligands on the formation of the complexes with different structures in the Co‐NTA system was discussed. The coordination of NTA and Hmta to Co²⁺ ions only resulted in the formation of mononuclear [Co(NTA)(Hmta)]^? ions which are further connected by K⁺ ions and water molecules to form a three‐dimensional network. The use of 4,4′‐bpy as ancillary ligand in 2 led to the formation of separate mononuclear [Co(4,4′‐bpy)₂(H₂O)₄]²⁺ and dinuclear [Co₂(NTA)₂(4,4′‐bpy)(H₂O)₂]^2? which are further connected by hydrogen bonds to form a supramolecular three‐dimensional network. In these cases it seems to suggest that the addition of neutral ancillary ligand into the Co‐NTA system leads to the formation of lower dimensional structures when the contribution of alkali ions to the structural dimensionality is neglected.     

Construction of two-dimensional (2D) H-bonded supramolecular nanostructures studied by STM

In this review,a group of two-dimensional（2D） hydrogen-bonded supramolecular networks developed in our laboratory are discussed.Our attention is mainly focused on:（1） recognition of Fe³⁺ through twocomponent molecular networks;（2） site-selective fabrication of 2D fullerene arrays;and（3） fabrication of the nanoporous structure regulated by photoisomerization reaction process.It is envisioned that special supramolecular nanostructures,through H-bonding interactions,can be constructed or reconstructed to be further investigated toward the research of multi-component systems,molecule recognition,single molecular switches,and host-guest supramolecular chemistry.     

Copper(II) Complex of a Urea-functionalized Pyridyl Ligand: Synthesis,Crystal Structure,and Acetate Binding Properties

A copper(II) acetate complex with a urea-functionalized pyridyl ligand, [CuL(OAc)₂]₂ · 2AcOH ( 1 ) [L = N-(3-chlorophenyl)-N'-(3-pyridyl) urea], was synthesized by the reaction of L with Cu(OAc)₂ in methanol. A zigzag-shaped hydrogen bond chain of L is obtained via urea N–H ··· N_pyridyl interactions, and a two-dimensional hydrogen bond network structure is further formed through the C–H ··· O interaction. In the complex 1 , a paddle-wheel structure is generated by Cu ··· O_acetate interactions and Cu ··· N_pyridyl interactions. Furthermore, hydrogen bonding chain structure is extended through weak C–H ··· O hydrogen bond interactions. Through ultraviolet-visible (UV/Vis) spectroscopy, the acetate binding properties of L in solution were also evaluated. Variable temperature magnetic susceptibility measurement indicates that the metal complex 1 displays antiferromagnetic coupling property.     

Dibromomanganese(II) complexes with hexamethylphosphoramide and phenylphosphonic bis(diamide) ligands

Tetrahedral dibromomanganese(II) complexes having formulas [MnBr₂{O?=?PR(NMe₂)₂}₂] (R?=?NMe₂ (1); Ph (2)) were isolated and characterized by single crystal X-ray diffraction. [MnBr₂{O?=?P(NMe₂)₃}₂] (1) crystallizes in the monoclinic C2/c space group. The asymmetric unit contains one half of the molecule with the Mn(II) atom in a distorted tetrahedral coordination. The intermolecular network of this coordination compound was studied by generating and inspecting its Hirshfeld surface, while the weak intramolecular hydrogen bonds were investigated computationally by AIM analysis in the gas phase and in solution. The Hirshfeld analysis was extended to the related [MnBr₂{O?=?PPh(NMe₂)₂}₂] complex (2).     

Synthesis and Characterization of Triphenyltin(IV) Carboxylates with Isophthalic Acid and Benzoic Acid Derivatives: X‐ray Crystal Structures of 1D Supramolecular Chains

The reaction of triphenyltin(IV) hydroxide with the isophthalic acid and benzoic acid derivatives, 5‐(1,3‐dioxo‐1,3‐dihydro‐isoindol‐2‐yl)‐isophthalic acid (H₂L¹) and 4‐(1,3‐dioxo‐1,3‐dihydro‐isoindol‐2‐yl)‐benzoic acid (HL²) yielded the complexes [(SnPh₃)₂L¹] ( 1 ) and [(SnPh₃)L²] ( 2 ). All complexes were characterized by elemental analysis and FT‐IR and NMR (¹H, ¹³C, ¹¹⁹Sn) spectroscopy. Interestingly, the supramolecular structures of 1 and 2 are found to consist of 1D molecular chains built up by intermolecular C–H ··· O hydrogen bonds. Their thermal stabilities were also investigated.     

Synthesis,structure and luminescent properties of Cd(II) and Zn(II) complexes constructed from 3,5-dimethyl-2, 6-pyrazinedicarboxylic acid

[Cd₂(phen)₂(DPZDA)₂(H₂O)₂] · 8H₂O (1) and [Zn(phen)(DPZDA)(H₂O)] · 2H₂O (2) have been synthesized by reaction of Cd(NO₃)₂/Zn(NO₃)₂ with phen and DPZDA (where phen = 1,10-phenanthroline, H₂DPZDA = 3,5-dimethyl-2,6-pyrazinedicarboxylic acid) in aqueous ethanol solution. Elemental analysis, IR spectra, thermal analyses and X-ray single crystal diffraction were carried out to determine the composition and crystal structure of 1 and 2. In 1, a 2D supramolecular network containing a novel metal-water decamer were formed by hydrogen bonds. In 2, a 2D supramolecular structure was constructed from hydrogen bonds and π·· · π interactions. Moreover, 1 and 2 displayed photoluminescent properties in the blue range at room temperature.     

X-ray diffraction,spectroscopic (IR,Raman) and DSC studies of bis(betainium) p-toluenesulfonate monohydrate crystal

Bis(betainium) p-toluenesulfonate monohydrate (abbreviated as BBTSH) was studied at various temperatures by X-ray diffraction, differential scanning calorimetry and vibrational spectroscopy methods. DSC curves of BBTSH show a peak at about 349 K which corresponds to water escape from the crystal, and reveal the “cold crystallization” phenomenon. BBTSH crystallizes in the P2₁/c space group of monoclinic system. After heating above 349 K the compound dehydrates, the crystal system changes to triclinic, the monocrystalline samples become non-merohedral twins. The BBTSH crystal comprises p-toluenesulfonic anions, monoprotonated betaine dimers and water molecules. Three kinds of hydrogen bonds are present in the crystal: strong, asymmetric and almost linear OH⋯O hydrogen bond (R(O⋯O) = 2.463(2) Å), weak O_wH⋯O hydrogen bonds (R(O_w⋯O) = 2.820(2) − 2.822(2) Å) and weak CH⋯O hydrogen bonds (R(C⋯O) = 3.295(2) − 3.416(2) Å). The ν_aOHO vibration of the strongest hydrogen bond in the crystal gives rise to an intense broad absorption with numbers of transmission windows in the low wavenumber region of the infrared spectra. Coupling between νCO stretching vibrations of two COO groups of the betaine dimer was detected. The process corresponding to the loss of water is accompanied by the breakage of strong OH⋯O hydrogen bonds in betaine dimers and rearrangement inside half of the betaine dimers. This rearrangement results in formation of the new betaine dimers with OH∙∙∙O hydrogen bond of similar strength as corresponding bond in the hydrated form (BBTSH).     

KH(O2)CO2⋅H2O2—An Oxygen-Rich Salt of Monoperoxocarbonic Acid

The surprising accessibility of the title compound has enabled the first X-ray structural analysis of the hydrogen peroxocarbonate anion (shown on the right).     

A novel dinuclear double-stranded helical complexes of bis(terdentate) N4O2 donor ligand with silver(I) and zinc(II) d metal ions

Reaction of the hexadentate N₄O₂-donor ligand 6,6′-bis(3-hydrazonobutan-2-one)-2,2′-bipyridine (L) with Ag^(I) and Zn^(II) affords a dinuclear double stranded helicate species [Ag₂L₂]²⁺ (1a) and [Zn₂L₂]²⁺ (1b), in which partitioning of the ligand into two bis-tridentate pyridyl-ketoimine chelating units allow each ligand to bridge both metal centres. X-ray crystallography, ESI-MS and UV–Vis spectrophotometric titration experiments reveal that the complex (1a) retains its solid-state structure in solution. The crystal structure of (1a) provides the first example of dinuclear silver(I) complex in which both of the metal centres can be approximated as a seven coordinate distorted mono-capped trigonal prism in which the Ag?Ag close contact of 3.034(4) Å is taken into account and forms the cap. The counter-ions do not interact with metal centres but hydrogen bond to N–H protons of the hydrazonic arms from the separate strands. The adjacent helical units are cross-linked together via NH?O_keto hydrogen bonding to maintain the supramolecular structure.     

A Self‐Assembled Calix[4]arene Dimer Linked through Hydrogen‐Bonded 2‐Ureidopyrimidin‐4(1H)‐one Groups

Tightly linked! A linear array of complementary hydrogen bonds forms between two 2‐ureidopyrimidin‐4(1H)‐one rings attached to the upper rims of facing 1,3‐alternate calix[4]arenes (shown schematically). The strength of the binding (K_ass>10⁶ M ⁻¹ in chloroform) and the efficiency of the self‐assembly open up interesting perspectives in the design of highly ordered multicomponent cages.     

Bis(2-(1H-imidazol-2-yl)-pyridine)copper(II): Effects of counteranions on the molecular and supramolecular structures

The synthesis and physical properties of bis(2-(1H-imidazol-2-yl)-pyridine)copper(II) with chloride, nitrate and perchlorate as counteranions have been described. Microanalysis, magnetic susceptibility, conductivity and various spectroscopic measurements have been used for the characterization of the complexes. The crystal structures of all three complexes have been determined. Intermolecular hydrogen-bonding interactions and the resulting self-assembly patterns for each of the species have been scrutinized. The chloride containing complex crystallizes as a trihydrate, where the metal ion is in a tetragonally elongated cis-N₄Cl₂ coordination sphere. This complex provides a three-dimensional honeycomb-like structure through N–H?Cl, O–H?Cl and O–H?O hydrogen bonds. In the nitrate containing species, one of the two counteranions coordinates to the metal centre to provide an irregular N₄O₂ coordination sphere, while the other counteranion, with the help of a lattice water molecule, assembles a ladder-like structure via N–H?O and bifurcated O–H?O,O hydrogen bonds. A one-dimensional polymeric species has been formed when perchlorate is the counteranion. Here one of the two perchlorates acts as a bridge between the metal centres that are in tetragonally elongated trans-N₄O₂ coordination spheres. This polymeric chain, together with the second perchlorate and a water molecule, form a ribbon-like structure due to N–H?O and O–H?O hydrogen bonds.     

Synthesis and Spectroscopic Characterization of New Lead(II) Thiosaccharinates. Molecular Structure of Bis(thiosaccharinato)tetrakis(pyridine)dilead(II) and Thiosaccharinato‐bis(1,10‐phenantroline)lead(II) Thiosaccharinate

Four new lead(II) thiosaccharinate complexes: [Pb(tsac)₂H₂O] (1) (tsac: thiosaccharinate anion), [Pb₂(tsac)₄(py)₄] (2) (py: pyridine), [Pb(tsac)(o‐phen)₂](tsac)·CH₃CN (3) (o‐phen: 1,10‐phenantroline), and [Pb(tsac)₂(bipy)] (4) (bipy: 2,2′‐bipyridine) were prepared. The infrared and electronic spectra as well as the thermal analysis of all the compounds were recorded and discussed. The thiosaccharinate anion acts in three different coordination forms, one of then reported for the first time. The crystal structures of complexes 2 and 3 have been determined by single crystal X‐ray diffractometry. In complex 2 , two monomeric moieties are joined together forming a symmetric bis‐μ‐sulphur bridged dimer by interaction of two lead(II) atoms through the exocyclic sulphur atoms of two thiosaccharinate ligands. The seven‐fold coordination sphere of each lead atom is completed by two pyridine nitrogen atoms and by another sulfur and two nitrogen atoms of the thiosaccharinate anions. In complex 3 , the lead(II) atom is coordinated by four nitrogen atoms of two 1,10‐phenantroline molecules and by the sulfur and nitrogen atoms of one thiosaccharinate ion. The second anion has an electrostatic interaction with the nucleus.     

Synthesis, crystal structure and thermal decomposition of a new copper propionate [Cu(CH3CH2COO)2]·2H2O

A new copper propionate complex was synthesised and characterized for application as precursor for CuO based oxide thin films deposition. The FT-IR and X-ray diffraction analyses have revealed the formation of a cooper propionate complex [Cu(CH₃CH₂COO)₂]·2H₂O. The crystal and molecular structure of a new copper propionate complex was determined by XRD on the copper propionate single crystal. The copper propionate complex has a binuclear structure, connected by bridging bidentate carboxylates groups and a Cu?Cu bond of 2.6 Å. The thermal decomposition of copper propionate has been investigated by thermal analysis using thermogravimetric (TG) and differential thermal analysis (DTA), differential thermal analysis coupled with quadrupole mass spectrometry-QMS, X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FT-IR) techniques. TG and XRD data indicate the reduction of Cu(II)-Cu(I,0) during the decomposition of copper propionate.     

Cadmium(II)bis(oxalato)cobaltate(II)- pentahydrate

A mixed metal carboxylate, cadmium(II)bis(oxalato)cobaltate(II)pentahydrate, has been synthesized and characterized by elemental analysis, IR spectral, reflectance and X-ray powder diffraction studies. Thermal decomposition studies (TG, DTG and DTA) in air showed that the compound decomposed to CdCoO3 at 370°C through the formation of an anhydrous compound at ~194°C. Finally, CdCoO₂ is generated at 1000°C. DSC study in nitrogen up to 550°C showed the formation of a mixture of CdO and Co₃O₄ as end products. The kinetic parameters have been evaluated for the dehydration and decomposition steps using four non-mechanistic equations, i.e., Freeman and Carroll, Coats and Redfern, Flynn and Wall, MacCallum and Tanner equations. Using seven mechanistic equations, the rate controlling processes of the dehydration and decomposition mechanism are also inferred. The kinetic parameters, DH and DS obtained from DSC are discussed. IR and X-ray powder diffraction studies identified some of the decomposition products. A tentative mechanism for the decomposition in air is proposed. This revised version was published online in August 2006 with corrections to the Cover Date.     

Structural diversity in Cu(II), Cd(II) and Hg(II) coordination complexes with the rigid N,N′-bis(2/3-aryl)-1,4-benzenedicarboxamide ligand

The syntheses and structures of a series of metal complexes, namely Cu₂Cl₄(L¹)(DMSO)₂·2DMSO (L¹ = N,N′-bis(2-pyridinyl)-1,4-benzenedicarboxamide), 1; {[Cu(L²)_1.5(DMF)₂][ClO₄]₂·3DMF}_∞ (L² = N,N′-bis(3-pyridinyl)-1,4-benzenedicarboxamide), 2; {[Cd(NO₃)₂(L³)]·2DMF}_∞ (L³ = N,N′-bis-(2-pyrimidinyl)-1,4-benzenedicarboxamide), 3; {[HgBr₂(L³)]·H₂O}_∞, 4, and {[Na(L³)₂][Hg₂X₅]·2DMF}_∞ (X = Br, 5; I, 6) are reported. All the complexes have been characterized by elemental analysis, IR spectra and single crystal X-ray diffraction. Complex 1 is dinuclear and the molecules are interlinked through S?S interactions. In 2, the Cu(II) ions are linked through the L² ligands to form 1-D ladder-like chains with 60-membered metallocycles, whereas complexes 3 and 4 form 1-D zigzag chains. In complexes 5 and 6, the Na(I) ions are linked by the L³ ligands to form 2-D layer structures in which the [Hg₂X₅]⁻ anions are in the cavities. The L² ligand acts only as a bridging ligand, while L¹ and L³ show both chelating and bridging bonding modes. The L¹ ligand in 1 adopts a trans-anti conformation and the L² ligand in 2 adopts both the cis-syn and trans-anti conformations, whereas the L³ ligands in 3–6 adopt the trans conformation.