Enantiospecific Synthesis of (–)-Cuspareine and (–)-Galipinine

An enantiospecific route to the synthesis of tetrahydroquinoline alkaloids (–)-cuspareine and (–)-galipinine is reported. Coupling of an iodide derivative of D-serine with aromatic dithianes and Pd-catalyzed intramolecular C–N coupling are the key steps in the synthesis.     

Pyrolysis kinetics of ethylene–propylene (EPM) and ethylene–propylene–diene (EPDM)

The thermal degradation kinetics of several ethylene–propylene copolymers (EPM) and ethylene–propylene–diene terpolymers (EPDM), with different chemical compositions, have been studied by means of the combined kinetic analysis. Until now, attempts to establish the kinetic model for the process have been unsuccessful and previous reports suggest that a model other than a conventional nth order might be responsible. Here, a random scission kinetic model, based on the breakage and evaporation of cleavaged fragments, is found to describe the degradation of all compositions studied. The suitability of the kinetic parameters resulting from the analysis has been asserted by successfully reconstructing the experimental curves. Additionally, it has been shown that the activation energy for the pyrolysis of the EPM copolymers decreases by increasing the propylene content. An explanation for this behavior is given. A low dependence of the EPDM chemical composition on the activation energy for the pyrolysis has been reported, although the thermal stability is influenced by the composition of the diene used.     

Determination of the stability constants of Pb–(DIPSO)x–(OH)y and Pb–(AMPSO)x–(OH)y systems

In this work, complexation between lead ion and the ligands 3-[N,N-bis(2-hydroxyethyl)amino]-2-hydroxypropanesulfonic acid (DIPSO) and N-(1,1-dimethyl-2-hydroxyethyl)-3-amino-2-hydroxypropanesulfonic acid (AMPSO), which are commercial pH buffers, is presented. Both ligands form complexes with lead in their pH buffer range (between pH 6.5 and 8.5 for DIPSO and between pH 8.0 and 9.0 for AMPSO). The final models and the overall stability constants, which are reported here, were determined by direct current polarography and glass electrode potentiometry [only for the Pb–(DIPSO)_x–(OH)_y system] at 25.0 °C and 0.1 M KNO₃ ionic strength. For the Pb–(DIPSO)_x–(OH)_y system, the proposed final model contains PbL, PbL₂, PbL₂(OH), and PbL₂(OH)₂ with stability constants, as log β, of 3.4 ± 0.1, 6.35 ± 0.15, 12.8 ± 0.2, and 18.0 ± 0.3, respectively. For the Pb–(AMPSO)_x–(OH)_y system, the species observed are PbL, PbL(OH), and PbL(OH)₂ with stability constants, as log β, of 2.9 ± 0.5, 9.4 ± 0.1, and 14.5 ± 0.2, respectively. For AMPSO, the possible adsorption of the ligand at the mercury electrode surface was evaluated by alternating current polarography through calculation of the capacitance of the double layer.     

Synthesis,crystal structure,thermal decomposition,and XPS studies of homo and heterotrinuclear Cu(II)–Cu(II)–Cu(II) and Cu(II)–Ni(II)–Cu(II) complexes obtained from salpn type ligands

In this study, a mononuclear CuL complex was prepared by the use of bis-N,N′-(salicylidene)-1, 3-propanediamine (LH₂) and Cu²⁺ ion. NiCl₂ and NiBr₂ salt were treated with this complex in dioxanewater medium and two new complexes [(CuL)₂NiCl₂(H₂O)₂] and [(CuL)₂NiBr₂(H₂O)₂)] with Cu(II)–Ni(II)–Cu(II) nucleus structure were obtained. In addition to this bis-N,N′-(2-hydroxybenzyl)-1,3-diaminopropane (L^HH₂) was prepared by the reduction of LH₂ with NaBH₄ in MeOH medium. The treatment of this reduced complex with Cu²⁺ ion resulted a complex [(CuL^H)₂CuCl₂] with a structure of Cu(II)–Cu(II)–Cu(II). The complexes prepared were characterized by the use of elemental analysis, IR spectroscopy, thermogravimetric and X-ray diffraction methods. The crystal structures of [(CuL)₂NiBr₂(H₂O)₂] (СIF file CCDC 1448402) and [(CuL^H)₂CuCl₂] (СIF file CCDC 1448401) complexes were elucidated. It was found that halogen ions are coordinated to terminal Cu²⁺ ions which are in a distorted square pyramid coordination sphere. It was determined that the central Cu(II), which joins terminal square pyramidal Cu(II), was coordinated only by the phenolic oxygens of the ligand while the central Ni(II) was coordinated by two phenolic oxygens of the organic ligand and two water molecules. These complexes were investigated by XPS and it was found that the terminal and central Cu²⁺ ions were different in Cu(II)–Cu(II)–Cu(II) complex. Also, the thermal degradation of the CuLH complex unit was observed to exothermic in contrast to the expectations.

     

Facile and Reversible Formation of Iron(III)–Oxo–Cerium(IV) Adducts from Nonheme Oxoiron(IV) Complexes and Cerium(III)

Ceric ammonium nitrate (CAN) or Ce^IV(NH₄)₂(NO₃)₆ is often used in artificial water oxidation and generally considered to be an outer-sphere oxidant. Herein we report the spectroscopic and crystallographic characterization of [(N4Py)Fe^III-O-Ce^IV(OH₂)(NO₃)₄]⁺ ( 3 ), a complex obtained from the reaction of [(N4Py)Fe^II(NCMe)]²⁺ with 2 equiv CAN or [(N4Py)Fe^IV=O]²⁺ ( 2 ) with Ce^III(NO₃)₃ in MeCN. Surprisingly, the formation of 3 is reversible, the position of the equilibrium being dependent on the MeCN/water ratio of the solvent. These results suggest that the Fe^IV and Ce^IV centers have comparable reduction potentials. Moreover, the equilibrium entails a change in iron spin state, from S=1 Fe^IV in 2 to S=5/2 in 3 , which is found to be facile despite the formal spin-forbidden nature of this process. This observation suggests that Fe^IV=O complexes may avail of reaction pathways involving multiple spin states having little or no barrier.     

Synthesis and Reactivity of Hydroxypoly(ethylene oxide) propyl–b–polydimethylsiloxane–b–propyl hydroxypoly(ethylene oxide)

A series of α, ω–bishydroxyl terminated PDMS, hydroxypoly(ethylene oxide) propyl–b–polydimethylsiloxane–b–propyl hydroxypoly(ethylene oxide) (HPEO–PDMS–HPEO) was prepared by a hydrosilation reaction of monoallyloxy substituted poly(ethylene oxide) with α,ω–bishydrogen terminated PDMS (HPDMS) that obtained via acid–catalyzed ring–opening polymerization of octamethylcyclotetrasiloxane with 1,1,3,3–tetramethyldisiloxane. Chloroplatinic acid was employed as the catalyst of hydrosilation. The molecular weight of HPEO–PDMS–HPEO could be controlled easily by varying the chain length of HPDMS. FTIR and ¹H–NMR spectroscopy were used to identify the structure of HPEO–PDMS–HPEO and HPDMS. The conversion of Si–H bond to Si–C bond was affected by the catalyst amount, reaction time and temperature. It was found that the optimum condition of hydrosilation reaction was the catalyst amount of 22 μg/g and 5 h time at 100°C. Synthesized HPEO–PDMS–HPEO showed good storage stability at ambient temperature. Urethane reaction of OH and NCO group revealed that HPEO–PDMS–HPEO was more reactive toward to diisocyanate than α, ω –bishydroxylbutyl terminated PDMS.     

Structures and luminescent properties of two heterotrimetallic Ln(III)–Sr(II)–K(I) complexes

Eu(III)–Sr(II)–K(I) and Tb(III)–Sr(II)–K(I) heterotrimetallic metal-organic frameworks with 2,4,6-pyridinetricarboxylic acid have been synthesized under hydrothermal conditions. The complexes are isomorphic and both in triclinic space group P-1. The ligands bond with three metal ions with two coordination modes. One connects seven metal ions and the other connects eight metal ions. IR spectra, thermal analysis, and photoluminescent properties have been studied. The results display strong characteristic emissions of Eu(III) or Tb(III) ions with excitation of ultraviolet radiation.     

Visible-light photoresponsive heterojunctions of (Nb–Ti–Si) and (Bi/Bi-O) nanoparticles

The increasing motivation to seek alternative sources of clean and sustainable energy has intensified, due to a growing awareness that fossil fuels are finite in quantity, and that the combustion products of such fuels contribute to global warming. Solar energy is considered one of the most readily available alternatives, but materials which are able to harness this form of energy need to be developed. This study details the development of a novel composite material, of the form of Bi/Bi-O nanoparticles supported on a (Nb–Ti–Si) oxide. Characterized using electrochemical and other methods, this material generates a photocurrent, and is capable of photo-oxidizing airborne-styrene in a fluidized-bed photoreactor when exposed to visible-light.     

Chemistry of1,16–Dihydroxytetraphenylene and 2,3,9,10–Tetrakis(trimethylsilyl)pentacene

Recently, four tetraphenylenols, as well as several non–substituted and substituted 2,3,9,10–tetrakis(trimethylsilyl)pentacenes were realized in our laboratories. In this presentation, the synthesis, hydrogen bonding properties, and chiral recognition studies of (S)–1,16–dihydroxytetraphenylene (1) and its (R)–enantiomer will be delineated. 1,16–Bis(diphenylphosphino)tetraphenylene (2) was also realized from 1 and was employed in the formation of a stable platinum complex. The synthesis…     

Soft template synthesis in copper(II)–dithiooxamide–methanal,copper(II)–dithiooxamide–ethanal and copper(II)–dithiooxamide–propanone triple systems in a copper(II)hexacyanoferrate(II) gelatin-immobilized matrix

Novel complexing processes in the Cu^II–dithiooxamide–methanal, Cu^II–dithiooxamide–ethanal and Cu^II–dithiooxamide–propanone triple systems proceeding under specific conditions, to copper(II)hexacyanoferrate(II) gelatin-immobilized matrix systems in contact with aqueous-alkaline (pH 12) solutions containing dithiooxamide and methanal, ethanal or propanone, have been studied. It has been shown that template synthesis leading to the formation of macrocyclic coordination compounds (2,8-dithio-3,7-diaza-5-oxanonandithioamide-1,9)copper(II), (2,8-dithio-3,7-diaza-4,6-dimethyl-5-oxanonandithio-amide-1,9)copper(II) and (4,4,6-trimethyl-2,8-dithio-3,7-diazanonen-6-dithioamide-1,9)copper(II), respectively, takes place under such conditions. Dithiooxamide, methanal, ethanal and propanone act as ligand synthons in these processes.     

Synthesis and crystal structure of d–f heteronuclear Gd(III)–Co(II) system

A carboxylate-bridged Co(II)–Gd(III) complex, [(bipy)CoL₃Gd(NO₃)L₃Co(bipy)] (HL =?α-methylacrylic acid, bipy =?2,2′-bipyridine), was prepared and characterized. Single crystal X-ray analysis reveals that the complex assumes a carboxylate-bridged CoGdCo unit. Magnetic measurements showed χ_m T decreases when the temperature is lowered.     

Synthesis and structure of diamine bis(phenolate) complexes containing the Ti(OEt)–O–Ti(OEt) function

Reaction of diamine-bis(phenol) ligands containing a mixture of N-methyl and N,N′-dimethyl-N,N-bis(2-hydroxy-3,5-dimethylbenzyl)ethylenediamine, H₂L¹ and H₂L³, with [Ti(OCHMe₂)₄ in absolute ethanol under reflux without exclusion of air and moisture gives [(L¹)Ti (OEt–O–Ti(OEt)(L¹)] (1). [(L³)Ti(OEt)–O–Ti(OEt)(L³)] (2) forms when the remaining solution containing [(L³)Ti(OEt)₂] (3) (characterised by X-ray crystallography) is hydrolysed with H₂O. For the N-methyl and N,N′-dimethyl ligand mixture H₂L² and H₂L⁴, which contain tert-butyl groups on the ortho-positions of the aryl rings, [(L²)Ti(OEt)–O–Ti(OEt)(L²)] (4) forms much more slowly and [(L⁴)Ti(OEt)₂] (5) does not hydrolyse when H₂O is added. When the N-protonated ligand N,N-bis(2-hydroxy-3-methyl-5-tert-butylbenzyl)ethylenediamine, H₂L⁵, is used, rapid hydrolysis to two isomers of [(L⁵)Ti(OEt–O–Ti(OEt)(L⁵)] (6) occurs without addition of water. For N,N-bis(2-hydroxy-3,5-di-tert-butylbenzyl)ethylenediamine, H₂L⁶, hydrolysis to [(L⁶)Ti(OEt)–O–Ti(OEt)(L⁶)] (7) occurs slowly when H₂O is added. For pendant NMe₂ ligand N,N-dimethyl-N′,N′-bis(2-hydroxy-3-methyl-5-tert-butylbenzyl)ethylenediamine, H₂L⁷, the hydrolysis reaction readily gives [(L⁷)Ti(OEt)–O–Ti(OEt)(L⁷)] (8) for which an X-ray crystal structure was obtained. The ortho-tert-butyl ligand derivative H₂L⁸ formed a complex analysing as [(L⁸)Ti(OEt)–O–Ti(OEt)(L⁸)] (9) which could not be studied further due to insolubility. Pendant pyridine ligand N-(2-pyridylmethyl)-N,N-bis(2′-hydroxy-3′-methyl-5′-tert-butylbenzyl)amine, H₂L⁹, apparently forms isomers of [(L⁹)Ti(OEt)–O–Ti(OEt)(L⁹)] and possibly [{(L⁹)Ti(O)}₂] from [(L⁹)Ti(OEt)₂] (10). The ortho-tert-butyl ligand derivative H₂L¹⁰ formed [(L¹⁰)Ti(OEt)–O–Ti(OEt)(L¹⁰)] (11) for which an X-ray crystal structure was obtained.     

DNA-binding and photocleavage studies of metallofluorescein–porphyrin complexes of zinc(II) and copper(II)

The DNA-binding behaviors of the fluorescein?Cporphyrinatozinc(II) complex Zn(Fl-PPTPP) (Fl-PPTPP?=?5-(4-fluoresceinpropyloxy)phenyl-10,15,20-triphenylporphyrin) and fluorescein?Cporphyrinatocopper(II) complex Cu(Fl-PPTPP) with calf thymus DNA (CT-DNA) were investigated by UV?CVis absorption titrations, fluorescence spectra, viscosity measurements, thermal denaturation and circular dichroism. The results suggest that both complexes interact with CT-DNA by intercalation. In addition, their photocleavage reactions with pBR322 supercoiled plasmid DNA were investigated. Both complexes exhibit significant DNA cleavage activity, and singlet oxygen may play an important role in these reactions.     

Carboxymethylcellulose (CMC)–hydroxyethylcellulose (HEC) based hydrogels: synthesis and characterization

A novel carboxymethylcellulose (CMC)–hydroxyethylcellulose (HEC)-based hydrogel with sensitivity to environmental changes, pH and salts was synthesized by using fumaric acid and malic acid at various concentrations. Water uptake capacity of hydrogels was investigated in distilled water, various salt and pH solutions. From pH-dependent studies, it was found that greater water uptake values were observed at greater pH values (7.4), and reversible pH responsiveness of CMC–HEC based hydrogels was obtained. Decreasing the water uptake capacity with increasing of the charge of the metal cation (Al³⁺ < Ca²⁺ < Na⁺) demonstrated metal ion responsiveness of CMC–HEC-based hydrogels. From tensile tests of the hydrogels, a greater crosslinker concentration led to greater tensile strength values. Thermogravimetric analysis and scanning electron microscopy images were used to determine the thermal stability and to observe morphological properties of the samples, respectively.     

In-situ separation of chromium(III) and chromium(VI) and sequential ETV–ICP–AES determination using acetylacetone and PTFE as chemical modifiers

Electrothermal vaporization–inductively coupled plasma–atomic emission spectrometry (ETV–ICP– ES) has been used for the sequential determination of Cr(III) and Cr(VI). The method is based on the difference between the chelate reactions of the two Cr species and acetylacetone. Cr(III) chelate was separated from Cr(VI) and determined with use of acetylacetone as chemical modifier. The retained Cr(VI) in graphite tube was analyzed subsequently, after addition of polytetrafluoroethylene (PTFE) as chemical modifier. The different factors affecting the vaporization behavior of Cr(III) acetylacetonate were investigated in detail. The detection limits for Cr (III) and Cr(VI) were 0.56 and 1.4 ng mL^–1, respectively, and relative standard deviations for 0.1 μg mL^–1 Cr(III) and 0.1 μg mL^–1 Cr(VI) were 2.5% (n = 6) and 4.8% (n = 6), respectively. The linear ranges of the calibration curve for both Cr(III) and Cr(VI) covered three orders of magnitude. The proposed method was used to analyze water samples with satisfactory results.     

Synthesis and properties of double copper(I)–nickel(II) sulfite

Pourbaix diagrams of Cu–H₂SO4–H₂O and Ni–H₂SO₄–H₂O systems have been refined, and stability regions of the sulfite phases have been determined. State diagrams of double copper(I)–copper(II) and copper(I)–nickel(II) sulfites have been constructed. Double copper(I)–nickel(II) sulfite has been isolated from aqueous solutions saturated with sulfur dioxide. The solutions at different ratios of the metals have been studied by spectrophotometry; the isolated double sulfite has been studied by X-ray diffraction, IR spectroscopy, dispersion analysis, and thermal analysis. Fundamentals of thermodynamic prognostication of the Cu₂SO₃·MSO₃ double sulfites synthesis have been elaborated.     

Adsorption and Structural Properties of Montmorillonite Pillared by Cr(III) and Cr(III)–Cu(II) Hydroxocomplexes

The sorption and structural parameters and thermal stability of montmorillonite pillared by Cr(III) polyhydroxocomplexes and heteronuclear Cr(III)–Cu(II) polyhydroxocomplexes were investigated. It was shown that the introduction of intercalating Cr(III) and Cr(III)–Cu(II) agents into the montmorillonite increased the value of the first basal reflection (d ₀₀₁) up to 1.85 nm in the first case and up to 1.98 nm, in the second. The dependence of the values of d ₀₀₁and specific surface area on the OH^–/Cr³⁺ratio was found, which is retained during the calcination of the samples up to 500–800°C. The sorption ability of the prepared samples with respect to acetone, ethanol, benzene, toluene, and water was investigated.     

Relationship between (micro)structure and functional (photocatalytic and adsorption) properties of anatase–mordenite nanocomposite

Research on Chemical Intermediates - Anatase–mordenite nanocomposite was synthesized in&nbsp;situ and characterized by X-ray diffraction analysis, Brunauer–Emmett–Teller...     

Phase Behavior of Poly(Oxyethylene)–Poly(Oxypropylene)–Poly(Oxyethylene) Block Copolymer in Water and Water–C12EO5 Systems

Abstract

The binary phase diagram of a triblock copolymer poly(oxyethylene) (PEO) poly(oxypropylene) (PPO) poly(oxyethylene) (PEO), (PEO)₃₇(PPO)₅₈(PEO)₃₇ or P105 in water and the ternary system of P105, water, and pentaoxyethylene dodecyl ether (C₁₂EO₅) has been studied to understand the miscibility of a small amphiphile, C₁₂EO₅ and a copolymer, as well as the mixing effect on the formed liquid crystalline structures. Phase diagrams, small angle x‐ray scattering (SAXS) and differential scanning calorimetry (DSC) were used to characterize these systems. The phase diagram of the binary system is presented together with the characteristic parameters for founded phases, namely, cubic, hexagonal, and lamellar phases. In the ternary system it was found that the small amphiphile and the block copolymer, despite having very different chain lengths are essentially miscible forming single phases. A large amount of C₁₂EO₅ can be solubilized in the P105 aggregates whereas P105 is most difficult to dissolve in the C₁₂EO₅ aggregates because of the difference in the molecular size. The copolymer is practically insoluble in the lamellar phase of C₁₂EO₅ due to the packing constraint. Hence, two lamellar phases coexist in a surfactant‐rich region, at W _s  = 0.66, where W _s is the weight fraction of the total amphiphile in the system. This indicates that the thickness of the lipophilic part of the C₁₂EO₅ lamellar phase is too small to allocate the large lipophilic chain of the P105 triblock copolymer.