香豆素类荧光探针对硫化氢检测的研究进展

硫化氢(H2S)是目前人们发现的第三类生物内源性“气体信使分子”。其及时检测对人类的健康有着非常大的意义。随着荧光探针技术的发展,有机小分子荧光探针受到广大学者的关注。其中,香豆素因其结构简单,荧光量子产率高以及易于功能化而备受青睐。本文根据探针的识别机理综述近三年来报道的香豆素类H2S荧光探针代表性研究成果,并对其进行了展望,为后续设计开发更具实用价值的H2S荧光探针提供一点有益的参考。     

A TPA-caged precursor of (imino)coumarin for “turn-on” fluorogenic detection of Cu

We strategize to utilize the precursors of (imino)coumarin fluorophores to deliver novel reactive Cu⁺ probes, where tris[(2-pyridyl)-methyl] amine (TPA) works as a reactive receptor towards Cu⁺. To verify this strategy, CP1, a representative probe and relevant sensing behaviors towards Cu⁺ are presented here. CP1 features good solubility and fast response for monitoring labile copper in aqueous solution and live cells. The sensing mechanism of CP1 is determined by HPLC titration and mass spectrometric analysis. The probe CP1 exhibits a 60-fold fluorescence enhancement and a detection limitation of 10.8 nM upon the detection of Cu⁺. CP1 is further applied for imaging labile copper in live cells. This work provides a starting point for future development of Cu⁺ probes, based on in situ formation of (imino)coumarin scaffolds, as well as their further investigations of copper signaling and biological events.     

Novel fluorescent probe based on dicoumarin for detection of hydrogen sulfide in real samples

A novel dicoumarin-derived hydrogen sulfide (H₂S) selective fluorescent “turn-on” probe 3-(2,4-dinitrobenzenesulfonate)-dicoumarin (DC-HS) created by covalent bonding between the 2,4-dinitrobenzenesulfonyl (DNBS) and the 3-hydroxy-dicoumarin (DC-OH) units. Upon the addition of H₂S, the probe DC-HS solution's fluorescence significantly increased, and its appearance is changed from practically colorless to brilliant yellow. Probe DC-HS also showed significant fluorescence amplification that was quantitatively detectable in the concentration range of 0–1.5 μM and had a low detection limit or limit of detection of 0.2 nM. Moreover, with a high recovery rate and excellent accuracy, the developed fluorescent molecule was used successfully for the analysis of H₂S in red wine samples.     

Synthesis and crystal structure of a new copper(II) binuclear complex bridged by the reduced derivative of a nitronyl nitroxide biradical

A new copper(II) binuclear complex, [Cu(hfac)₂]₂(IMH)₂Ph(OMe)₂ ((IMH)₂Ph(OMe)₂?=?2,5-dimethoxyl-1,4-bis(4′,4′,5′,5′-tetramethylimidazoline-3′-oxide)benzene, hfac?=?hexafluoroacetonate), bridged by a reduced derivative of a nitronyl nitroxide biradical has been synthesized and characterized by X-ray crystallography. The complex crystallizes in the monoclinic space group P2₁/n, with a?=?10.002(14), b?=?19.950(3), c?= 14.504(2) Å, β?=?108.842(3)° and Z?=?2. The structure refined to a final R value of 0.0644. The complex contains two copper(II) ions bridged by a reduced derivative of a nitronyl nitroxide biradical with a Cu?···?Cu separation of 8.430(2) Å.     

Cu(II) complex of a flexible tripodal receptor as a highly selective fluorescent probe for iodide

A Cu(II) complex of a tripodal receptor bearing an anthracene moiety on one pod as a fluorophore was synthesized. The anion recognition behavior of the Cu(II) complex was evaluated in CH₃CN/H₂O (95:5, v/v), resulting in an extremely high selectivity for iodide over other anions such as F⁻, Cl⁻, Br⁻, , CH₃COO⁻, and . The Cu(II) complex acts as a selective probe for estimating iodide even in the presence of other anions without any interference.     

A copper(II) complex of benzimidazole-based ligand: synthesis,structure, redox aspects and fluorescence properties

Employing 1-(2-methoxybenzyl)-2-(2-methoxyphenyl)-1H-benzimidazole (bpb) as a monodentate ligand, a new greenish-blue copper(II) complex, [Cu(bpb)₂(NO₃)₂] (1a), has been synthesized. 1a has been characterized analytically and spectroscopically. The X-ray crystal structure of 1a reveals that it adopts a cis disposition with respect to the ligands. The solid state structure of 1a is stabilized by intramolecular offset face-to-face π–π stacking. Non-covalent supramolecular edge-to-face C–H?π interactions with neighboring molecules give 1-D supramolecular chains that further lead to the formation of an assembled 3-D supramolecular metal-organic framework via hydrogen bonding interactions. 1a shows blue fluorescence most likely due to intramolecular offset face-to-face π–π stacking. At room temperature, 1a is one-electron paramagnetic. It shows a rhombic EPR spectrum with g₁ = 2.12, g₂ = 2.42, and g₃ = 2.52 in the solid state at liquid nitrogen temperature. In cyclic voltammetry, 1a displays a one-electron oxidative Cu(II)/Cu(III) couple. Our DFT calculations, corroborate the observed experimental results of 1a.     

Thiocyanate-selective electrode based on N-salicylidene-benzylamineato copper(II) complex

Highly selective poly(vinyl chloride) (PVC) membrane electrode based on N-salicylidene-benzylamineato copper(II) complexes [Cu(SBA)₂] as new carriers towards thiocyanate-selective electrode was reported. The influence of membrane composition, pH and possible interfering anions were investigated on the response properties of the electrode. The resulting electrode exhibits anti-Hofmeister selectivity sequence: SCN⁻ > ClO₄⁻ > Sal⁻ > I⁻ > Br⁻ > NO₃⁻ > NO₂⁻ > SO₃²⁻ > H₂PO₄⁻ > Cl⁻ > SO₄²⁻, and a near-Nernstian potential linear range for thiocyanate from 1.0 × 10⁻¹ to 9.0 × 10⁻⁷ M with a detection limit of 7.0 10⁻⁷ M and a slope of , over a wide pH range of 3.0–9.0 in phosphate buffer solution at 20°C. The proposed electrode has a fast response time of about 5–10 s and can be used for at least 3 months without any considerable divergence in potential. The electrode was successfully applied to the determination of thiocyanate in waste water and human urine and saliva samples. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 3, pp. 293–299. The text was submitted by the authors in English.     

Syntheses and crystal structures of nickel(II), copper(II), and zinc(II) complexes with a biphenyl-bridged bis(pyrrole-2-yl-methyleneamine) ligand

The reactions of nickel(II), copper(II), and zinc(II) acetate salts with a potentially tetradentate biphenyl-bridged bis(pyrrole-2-yl-methyleneamine) ligand yielded three complexes with different coordination geometries. X-ray crystal structural analysis reveals that in the nickel(II) complex each nickel is five-coordinate, distorted trigonal bipyramid. In the copper(II) complex, each copper is four-coordinate, between square planar and tetrahedral. In the zinc(II) complex, each zinc is four-coordinate with a distorted tetrahedral geometry and the molar ratio of the zinc and ligand is 1 : 2.     

A selective, sensitive probe for mercury(II) ions based on oxazine-thione

A selective, sensitive probe for Hg(II) ions, 7-(diethylamino)-3-methyl-2H-benzo[b][1,4] oxazine-2-thione (1), is developed. Compound 1 behaves as a ratiometric probe, exhibiting a large blue shift of 100 nm in its absorption spectra upon exposure to Hg(II) ions. The dramatic color change of the solution made ‘naked-eye’ detection of Hg(II) ions possible. Emission spectra of 1 displayed a selective enhancement in intensity in the presence of Hg(II) ions. ESI⁺-MS analysis indicated that Hg²⁺-induced desulfurization caused the large absorption response.     

Synthesis of a di(2-picolyl)amino-β-diketone dual-functional ligand that can coordinate to europium(III) for responding to copper(II) and sulfide ions

Lanthanide complex-based luminescent probes/chemosensors have shown great utilities in various biological and environmental assays with time-resolved detection mode to eliminate background noises. In this work, by conjugating di(2-picolyl)amine (DPA) with a tetradentate β-diketone 1,2-bis[4'- (1",1",1",2",2"-pentafluoro-3",5"-pentanedion-5"-yl)benzyl]-4-chlorosulfo-benzene (BPPBCB), a novel dual-functional ligand that can coordinate to Eu³⁺ for responding to Cu²⁺ and S^2- ions in aqueous media, DPA-BPPBCB, has been designed and synthesized. The β-diketone moiety of DPA-BPPBCB can form a strongly luminescent complex with Eu³⁺. Upon reaction with Cu²⁺, accompanied by the formation of heterobimetallic complex Cu²⁺-DPA-BPPBCB-Eu³⁺, the Eu³⁺ luminescence was quenched. While in the presence of S^2-, owing to the high affinity of S^2- to Cu²⁺, stable CuS was formed, which resulted in the release of Cu²⁺ from Cu²⁺-DPA-BPPBCB-Eu³⁺, to restore the luminescence of the Eu³⁺ complex. This unique “on-off-on” luminescence response of the Eu³⁺ complex enabled Cu²⁺ and S^2- ions in aqueous media to be detected with time-resolved luminescence detection mode.     

Photoluminescent and electrochemiluminescent dual-signaling probe for bio-thiols based on a ruthenium(II) complex

Photoluminescence (PL) and electrochemiluminescence (ECL) detection techniques are highly sensitive and widely used methods for clinical diagnostics and analytical biotechnology. In this work, a unique ruthenium(II) complex, [Ru(bpy)₂(DNBSO-bpy)](PF₆)₂ (bpy: 2,2′-bipyridine; DNBSO-bpy: 2,4-dinitrobenzenesulfonate of 4-(4-hydroxyphenyl)-2,2′-bipyridine), has been designed and synthesized as a highly sensitive and selective PL and ECL dual-signaling probe for the recognition and detection of bio-thiols in aqueous media. As a thiol-responsive probe, the complex can specifically and rapidly react with bio-thiols in aqueous solutions to yield a bipyridine-Ru(II) complex derivative, [Ru(bpy)₂(HP-bpy)]²⁺ (HP-bpy: 4-(4-hydroxyphenyl)-2,2′-bipyridine), accompanied by the remarkable PL and ECL enhancements. The complex was used as a probe for the PL and ECL detections of cysteine (Cys) and glutathione (GSH) in aqueous solutions. The dose-dependent PL and ECL enhancements showed good linear relationships against the Cys/GSH concentrations with the detection limits at nano-molar concentration level. Moreover, the complex-loaded HeLa cells were prepared for PL imaging of the endogenous intracellular thiols. The results demonstrated the practical utility of the complex as a cell-membrane permeable probe for PL imaging detection of bio-thiols in living cells.     

Synthesis,characterization, and crystal structure of a copper(II) complex of 1,10-phenanthroline and succinate

A mixed ligand complex of Cu(II) with 1,10-phenanthroline and succinate has been synthesized from the reaction of hydrated copper nitrate, succinate, and 1,10-phenanthroline. The nature of bonding and the structure of the complex were characterized by elemental analyses, infrared spectrum, TGA/DTA, and X-ray diffraction. The crystal crystallizes in triclinic space group P 1. The complex is polymeric and the geometry around each copper varies from square planar to distorted square pyramidal or octahedral. Each copper coordinates two oxygens of succinate and two nitrogens of 1,10-phenanthroline. The thermal decomposition of the complex has also been studied by TGA and DTA under inert atmosphere.     

Highly selective detection of Cu2+ based on a thiosemicarbazone triphenylacetylene fluorophore

A novel thiosemicarbazone fluorophore (3) was successfully synthesized in 3 steps via Sonogashira coupling and Knoevenagel condensation using baker's yeast (Saccharomyces cerevisiae) as a biocatalyst. Compound 3 contains triphenylacetylene, which acts as a fluorophore, and thiosemicarbazone, which acts as a copper probe. Compound 3 exhibited highly selective detection of Cu²⁺ ions based on photoinduced electron transfer (PET) in 10 mM HEPES buffer pH 7.4/propylene glycol (70% (v/v)). A linear relationship was observed for Cu²⁺ concentrations between 0.1 nM and 10 μM, and the detection limit of the method was 0.14 nM. Additionally, 3 was utilized to detect Cu²⁺ in wastewater with satisfactory results, which highlighted its potential for real sample applications.     

A dimeric copper coumarin complex: synthesis and crystal structure of [{Cu(4-methyl-7-(salicylideneamino)coumarin)2}2]

A binuclear copper complex [{Cu(L)₂}₂], C₆₈H₄₈Cu₂N₄O₁₂C (where L is 4-methyl-7-(salicylideneamino)coumarin), has been synthesized and characterized using elemental analysis, molar conductance measurements, and infrared, ultraviolet and ESR spectrosopy. The molecular structure of title compound, determined by single-crystal X-ray diffraction studies, reveals that the two symmetric Cu(L)2 units are associated into a dimer by rather long Cu...O bonds. The Cu(II) ions are bridged via the phenolic oxygen of one of the monomers and have distorted trigonal bipyramidal conformation geometry. Within each monomer the two methylsubstituted coumarin skeletons are trans to one another, but adopt a parallel arrangement with respect to the other monomer. Only half of the complex molecule can be found in the asymmetric unit, Z′ = 0.5, the other half is generated by the symmetry centre.      

Preparation of samarimm(ii) sulfide by the reaction of samarium(II) bis[bis(trimethylsilyl)amide] with hydrogen sulfide

X-ray amorphous samarium(II) sulfide was prepared by the reaction of H₂S with samarium(II) bis[bis(trimethylsilyl)amide] (1) in THF at 10^–2 Torr. Compound1 was prepared by two methods: 1) the reaction of SmI₂ with lithium bis(trimethylsilyl)amide and 2) the reaction of samarium naphthalide with bis(trimethylsilyl)amine. SmS was transformed to the polycrystalline state with the lattice parametera = 5.92 Å by annealing at 400–500 °C.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 241–243, February, 1995.     

Coumarin-based tripodal chemosensor for selective detection of Cu(II) ion and resultant complex as anion probe through a Cu(II) displacement approach

In this paper, a novel tripodal fluorescent receptor based on naturally occurring coumarin was synthesized and its ionic recognition properties were fully investigated by spectroscopic techniques. As revealed by the results, tripodal 1 exhibits excellent selectivity toward copper(II) by forming a 1:1 complex with triazole N as the main binding sites. And the resulted 1·Cu²⁺ complex shows recognition ability toward H₂PO₄^? by metal displacement approach. The recognition mechanism was further investigated by computer calculation.     

Coordination behavior of 3,4-bis(2-pyridylmethylthio)toluene with copper(II) ions: Synthesis,structural characterization and reactivity,and DNA binding study of the dinuclear copper(II) complex

On reaction of different copper(II) salts with 3,4-bis(2-pyridylmethylthio)toluene (L) having neutral tetradentate NSSN donor set in different chemical environments, two mononuclear copper(II), one dinuclear copper(I) and one dinuclear copper(II) complexes, formulated as [Cu^II(L)(H₂O)₂](NO₃)₂ (1), [Cu^II(pic)₂] (2), [Cu^I₂(L)₂](ClO₄)₂ (3) and [Cu^II₂(L)₂Cl₂](ClO₄)₂ (4), respectively, were isolated in pure form [where pic = picolinate]. All the complexes were characterized by physicochemical and spectroscopic methods. The product of the reactions are dependent on the counter anion of copper(II) salts used as reactant and on the reaction medium. Complexes 1 and 4 were obtained with nitrate and perchlorate copper(II) salts, respectively. On the other hand, C–S bond cleavage was observed in the reaction of L with copper(II) chloride to form in situ picolinic acid and complex 2. Dinuclear complexes 3 and 4 were separated out when copper(II) perchlorate was allowed to react with L in methanol and in acetonitrile, respectively, under aerobic condition. The X-ray diffraction analysis of the dinuclear complex 3 shows a highly distorted tetrahedral geometry about each copper ion. Complex 4 is converted to 3 in acetonitrile in presence of catechol. The spectral study of complex 4 with calf thymus DNA is indicative of a groove binding mode interaction.     

Highly selective chromogenic and fluorogenic probe based on benzothiazole-thiosemicarbazone Schiff base for detection of copper (II) in real samples

Copper is the third most abundant essential transition metal ion in the human body. It's responsible for important activities in many living things, but excessive intake of Cu²⁺ can lead to a range of diseases. A colorimetric and turn-off fluorescent probe (E)-2-(5-(benzothiazol-2-yl)-2-(diethylamino)-4-hydroxybenzylidene)-N-phenylhydrazine-1-carbothioamide ( ZTR ) was designed and synthesized by thiosemicarbazone Schiff base as a specific complexes site strategy to achieve highly specific Cu²⁺ detection. The fluorescence of the probe ZTR solution fell dramatically when Cu²⁺ was added, and its appearance changed from dazzling blue to nearly colorless. The simple structure and readily available fluorescent probe provide a novel approach for the quantitative detection of Cu²⁺ in the linear range from 0 to 0.12 μM, with a detection limit down to 16 nM, and with high selectivity for Cu²⁺ over 15 other metal ions. Job’s plot analysis showed that probe ZTR and Cu²⁺ formed a 1:1 coordination complex. In addition, because of its low detection limits and fast response time, the created fluorescent molecule was effectively used to study the target ions on test paper strips and in water samples.))     

Design and characterization of 3-azidothalidomide as a selective hydrogen sulfide probe

Hydrogen sulfide (H₂S) has been recently recognized as an important signaling molecule in biological systems. Herein, we report the development of a fluorescence turn-on probe based on the structure of pomalidomide, a FDA approved drug for the treatment of multiple myeloma. Various characterizations demonstrated high selectivity and sensitivity of this probe toward H₂S. Furthermore, the application of this probe to detect H₂S in living cells was confirmed by flow cytometry and fluorescence imaging studies.     

Two-photon fluorescent probe for hydrogen sulfide based on a red-emitting benzocoumarin dye

Hydrogen sulfide (H₂S) is an endogenous gasotransmitter and plays intriguing biological roles. To study the biological role of H₂S, efficient fluorescent probes are in great demand. For imaging of H₂S in deep-tissue, a two-photon probe that emits in the red wavelength region is of choice to avoid the autofluorescence from intrinsic biomolecules. Here, we disclose such a probe, which, developed based on an acetyl benzocoumarin fluorophore, can be excited at 900?nm under two-photon excitation and emit in the red region. The probe shows high reactivity, selectivity, and sensitivity in in vitro assays. Two-photon microscopic imaging of H₂S in HeLa cells aided by the probe demonstrates that it is potentially useful to study H₂S level changes in cells and tissues influenced by external stimuli.