Synthesis and Pyrolytical Solid-Phase Structural Transformations of New Oxorhenium(V) Complexes with 2-Benzoxazolethione

2-Benzoxazolethione reacts with the parent oxorhenium(V) complex, H₂[ReOCl₅], to yield either mononuclear or dinuclear complexes depending on the metal: ligand molar ratio and the concentration of hydrochloric acid containing the parent rhenium complex. The mononuclear complexs [ReOLCl(OH₂)₃]Cl₂, [ReOL₂(OH₂)₃]Cl₃ and [ReOLCl₃(OH₂)]; and dinuclear complexes [Re₂O₃(μ-L)₂Cl₄]·2H₂O and [Re₂O₂(μ-L)L₂Cl₆]-2H₂O were obtained. Both types of complexes have octahedral configurations. The mononuclear complexes prepared in 6N HCl or in 9N HCl undergo irreversible one-step solid-phase thermochromism transformation, thus, the colour of complexes changed from green to brown, black or bluish-green, upon heating. For the complexes obtained in 6N HCl, this step corresponds to structural changes due to the formation of other types of dinuclear complexes, while the mononuclear complex obtained in 9N HCl changes to another mononuclear complex with different coordination sites. On the other hand, the colour of the dinuclear complexes prepared in 2N HCl changed from brown to black, upon heating, in one step solid-phase thermochromism transformation corresponding to a change in the mode of coordination sites of the organic ligand. All thermal products obtained have octahedral configurations. The ligand behaves in these complexes either as a neutral, mono-, bidentate or monoanionic bidentate towards the oxorhenium ions. All complexes and the corresponding thermal products were isolated and their structures were elucidated by elemental analyses, conductance, IR and electronic absorption spectra, magnetic moments, ¹H NMR and TG-DTA measurements as well as by mass spectroscopy.     

Complexes of Oxorhenium(V) with Aromatic 2-Amino-Alcohols

Monooxo complexes of rhenium(V) with 2-aminophenol and some of its derivatives (H₂nod), containing the N,O donor-atom set, have been synthesized. Square-pyramidal complexes [ReO(nod)₂]^? were isolated by reaction with (n-Bu₄N) [ReOCl₄] in ethanol. In benzene the neutral species [ReOCL(Hnod)₂] were obtained. In the presence of hydrochloric acid in ethanol, the anionic complexes (n-Bu₄N) [ReOCl₃(Hnod)] were produced. Trans-[ReOCl₃(PPh₃)₂] was also reacted with some of the H₂nod ligands to yield [ReOCL₂(Hnod)(PPh₃]. The crystal structure of [ReOCl₂(Hmap)(PPh₃)] (H₂map = 2-aminobenzylalcohol) was determined; crystals are monoclinic, P2₁/n, with a = 15.065(6), b = 11.253(7), c = 15.850(7) Å, β = 94.27(4)°, U = 2680(2) &Aringsup3; and Z = 4. The structure was solved by the Patterson method and refined by full-matrix least-squares techniques to R = 0.042. The monoanionic Hmap^? ligand is coordinated as a bidentate through a neutral amino nitrogen and an anionic alcoholate oxygen atom, with the latter trans to the oxo group.     

Synthesis and Structural Characterization of Dinuclear Oxorhenium(V) Complexes with Bidentate Imidazole Derivatives

The oxo-bridged dinuclear complexes [(μ-O){ReOCl₂(L)}₂] [L = 2-(1-ethylaminomethyl)-1-methylimidazole (eami); 2-(1-methylaminomethyl)-1-methylimidazole (mami); 2-(1-ethylthiomethyl)-1-methylimidazole (etmi)] were prepared by reaction of trans-[ReOCl₃(PPh₃)₂] with L in acetone. X-ray crystallographic studies of the eami and etmi complexes show that these ligands coordinate in a bidentate manner, and that the cis, cis-N₂Cl₂ and cis, cis-NSCl₂ equatorial planes are nearly orthogonal to the O=Re-O-Re=O backbone.     

Mononuclear and Dinuclear Cobalt Complexes and its Dioxygen Adduct with a New 24-membered Hexaaza Macrocyclic Ligand

Abstract

Dinucleating 24-membered hexaazadiphenol macrocyclic ligand 3,6,9,17,20,23-hexaaza-29,30-dihydroxy-13,27-dimethyl-tricyclo[23,3,1,1^11,15] triaconta-1(29), 11,13,15(30),25,27-hexaene (L or BDBPH), is prepared by the NaBH₄ reduction of the Schiff base obtained from [2+2] template condensation of 2,6-diformyl-p-cresol with diethylenetriamine. The ligand maintains dinuclear integrity for cobalt (II) while facilitating the formation of bridging phenolate dicobalt cores. Potentiometric equilibrium studies indicate that a variety of protonated, mononuclear and dinuclear cobalt (II) complexes form from p[H] 2 through 11 in aqueous solution. The protonation constants of this ligand and stability constants of the 1:1, 1:2 ligand: cobalt(II) complexes were determined in KCl supporting electrolyte (μ = 0.100 M) at 25°C. The mechanism for the formation of dinuclear dioxygen cobalt(II) complexes is also described. The stability constants of mononuclear and dinuclear cobalt complexes were determined under nitrogen. Preliminary results show that the dinuclear dioxygen cobalt (II) complexes do not catalyze hydroxylation of adamantane in the presence of H₂S as two-electron reductant.     

Complexes of cis -dihalogenorhenium(V) with iminophenol

Complexes cis-[ReOX₂(msa)(PPh₃)]?[X?=?Cl(1), I(2)] were prepared from trans-[ReOCl₃(PPh₃)₂] or trans-[ReOI₂(OEt)(PPh₃)²] with 2-(1-iminoethyl)phenol (Hmsa) in acetonitrile. An X-ray crystallographic study shows that the bonding distances and angles in 1 and 2 are nearly identical, and that the two halides in each complex are coordinated cis to each other in the equatorial plane cis to the oxo group. Rhenium(V) complexes with cis diiodides are rare. All bonding distances and angles are in the expected ranges.     

Synthesis of a New Ditopic Ligand Possessing Linear and Cyclic Tetraaza Subunits

An easy‐to‐run route to a new ditopic ligand possessing linear and cyclic tetraaza subunits is described. In the first step, the reaction consists in the preparation of a triprotected cyclam bearing a 3‐bromopropyl pendant side chain. A subsequent reaction with a bisaminal protected linear tetraamine gives, after deprotection, the desired ditopic ligand.     

Synthesis and Applications of a New Polysiloxane-Immobilized Macrocyclic Ligand System

Abstract

Insoluble porous solid, macrocyclic 22-membered ring, 1-oxa-6,9,12,15,18-pentaaza-2,22-disilacyclododocosane polysiloxane ligand system has been prepared by the reaction of a macro-silane agent with tetraethylorthosilicate. The macro-silane agent was prepared by the reaction of imino-bis(N-2-aminoethylacetamide) ligand with 3-iodopropyltrimethoxysilane in 1:3 molar ratio. The new prepared polysiloxane system exhibits variable potentials for the extraction of metal ions (Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ag⁺, Cd²⁺, Hg²⁺, and Pb²⁺) from aqueous solutions. The ligand system shows high capacity to extract silver, lead, and mercury. Chemisorption of the metal ions by the ligand system at the optimum conditions was found in the order Ag ⁺ > Pb²⁺ > Hg²⁺ > Cu²⁺ > Ni²⁺ > Fe³⁺ > Co²⁺ > Cd²⁺ > Zn²⁺.     

Effects of Ligand Chain Length and Terminal N-Alkylation on the Protonation Constants and Stability Constants of Some Transition Metal Complexes of Linear Tetraaza and Pentaaza Ligands

A number of terminal N-alkylated linear tetraaza and pentaaza ligands were prepared. Their ligand protonation constants and some transition and post-transition metal (Ni²⁺, Cu²⁺, Zn²⁺, and Cd²⁺) complex stability constants were determined by potentiometric titration methods. In general, methylation and ethylation at the terminal nitrogen atoms caused the corresponding ligand nitrogen basicity to increase; however, the corresponding metal complex stabilities were decreased compared to the non-alkylated structural analogs, presumably due to a steric effect.     

Synthesis, characterization and catalytic oxidation of cyclohexene with molecular oxygen with host (nanopores of zeolite-Y)/guest (Ni(II) complexes of 14- and 16-membered tetraaza dioxo diphenyl macrocyclic ligands) nanocomposite materials

Ni(II) complexes of [14]aneN₄: 1,5,8,12-tetraaza-2,9-dioxo-4,11-diphenylcyclotetradecane; [16]aneN₄: 1,5,9,13-tetraaza-2,10-dioxo-4,12-diphenylcyclohexadecane; Bzo₂[14]aneN₄: dibenzo-1,5,8,12-tetraaza-2,9-dioxo-4,11-diphenylcyclotetradecane and Bzo₂[16]aneN₄: dibenzo-1,5,9,13-tetraaza-2,10-dioxo-4,12-diphenylcyclohexadecane have been encapsulated in the nanopores of zeolite-Y by a two-step process in the liquid phase: (i) adsorption of [bis(diamine)nickel(II)] (diamine = 1,2-diaminoethane, 1,3-diaminopropane, 1,2-diaminobenzene, 1,3-diaminobenzene); [Ni(N–N)₂]²⁺–NaY; in the nanopores of the zeolite-Y, and (ii) in situ condensation of the nickel(II) precursor complex with ethylcinnamate. The new host–guest nanocomposite materials (HGNM) were characterized by several techniques: chemical analysis and spectroscopic methods (FT-IR, UV/Vis, XRD and DRS) and the BET technique. These complexes were used for oxidation of cyclohexene with molecular oxygen.     

Oxorhenium(V) complexes containing bidentate N,O-donor ligands of the pyridyl type

The reaction of equimolar quantities of trans-[ReOCl₃(PPh₃)₂] and 8-hydroxyquinoline (Hhqn) in benzene led to the isolation of the six-coordinate complex [ReOCl₂(hqn)(PPh₃)] (1). With 2-pyridine-ethanol (Hhep) the compound [ReOCl₂(hep)(PPh₃)] (2) was obtained. Both hqn and hep ligands act as monoanionic bidentate N,O-donor chelates. Although the two complexes are very similar, there are some significant differences in certain bond distances and angles in them. Both complexes contain the nearly linear trans O=Re–O axis, with this angle equal to 160.9(2)° and 167.8(1)° in 1 and 2, respectively.     

Synthesis and Structural Characterization of a New Macrocyclic Polysiloxane-immobilized Ligand System

Summary. A new porous solid macrocyclic 1,4,7,11,14-pentaazapentadecane-3,15-dione polysiloxane ligand system of the general formula P–(CH₂)₃–C₁₁H₂₂O₂N₅ (where P represents [Si–O]_n siloxane network) has been prepared by the reaction of polysiloxane-immobilized iminobis(N-(2-aminoethyl)acetamide) with 1,3-dibromopropane. The FTIR and XPS results confirm the introduction of the macrocyclic functional ligand group into the polysiloxane network. The new macrocyclic polysiloxane ligand system exhibits high potential for the uptake of metal ions (Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺).     

Synthesis and Structural Characterization of a New Macrocyclic Polysiloxane-immobilized Ligand System

A new porous solid macrocyclic 1,4,7,11,14-pentaazapentadecane-3,15-dione polysiloxane ligand system of the general formula P–(CH₂)₃–C₁₁H₂₂O₂N₅ (where P represents [Si–O]_n siloxane network) has been prepared by the reaction of polysiloxane-immobilized iminobis(N-(2-aminoethyl)acetamide) with 1,3-dibromopropane. The FTIR and XPS results confirm the introduction of the macrocyclic functional ligand group into the polysiloxane network. The new macrocyclic polysiloxane ligand system exhibits high potential for the uptake of metal ions (Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺).     

New Palladium(II) Complexes with a Tridentate PNO Ligand

The synthesis of neutral and cationic palladium complexes containing the tridentate monoanionic ligand [2-(2-Ph₂PC₆H₄-CH=N)C₆H₄O]^? is described. Deprotonation of the Schiff base formed by condensation of 2-(diphenylphosphino)benzaldehyde with 2-aminophenol in the presence of the appropriate palladium precursor ([Pd(AcO)₂] or [PdCl₂(PhCN)₂]) form the corresponding neutral complexes [Pd{2-(2-Ph₂PC₆H₄-CH=N)C₆H₄O}(AcO)] (1) or [Pd{2-(2-Ph₂PC₆H₄-CH=N)C₆H₄O}(Cl)] (2) in good yield. The first reacts smoothly with thiols and activated phenols to give complexes of general formula [Pd{2-(2-Ph₂PC₆H₄-CH=N)C₆H₄O}(X)] (X = OC₆F₅ (3), SEt (4), S^tBu (5), SC₆H₅ (6), SC₆H₄-4Me (7), SC₆H₄-4NO₂ (8)). When the chloro complex is treated with silver perchlorate and tertiary phosphines (L) the cationic derivatives [Pd{2-(2-Ph₂PC₆H₄-CH=N)C₆H₄O}(L)][ClO₄] (L = PPh₃ (9), PMePh₂ (10), PMe₂Ph (11), PEt₃ (12)) were obtained. The new complexes were characterized by partial elemental analyses and spectroscopic methods (IR, ¹H, ¹⁹F and ³¹P NMR).     

Synthesis of a re(VI)-catecholato complex by air oxidation of oxorhenium(V)

The complex [Re(ddcat)₃] (H₂ddcat?=?3,5-di-tert-butylcatechol) was prepared by the reaction of either cis-[Re^VO₂I(PPh₃)₂] or (n-Bu₄N)[Re^VOCl₄] with H₂ddcat in toluene in air. X-ray structure determination of the product unequivocally illustrates that the bidentate chelates are in the catecholato rather than the semiquinone form and that the metal has a formal oxidation state of +VI.     

Synthesis and Characterization of 1,8-bis(ferrocenylmethyl)-5,5,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane, a Macrocyclic Ligand and its Complexes

A new diferrocenyl-substituted macrocyclic ligand (H₂L) and its complexes ML(M = Cu^II, Ni^II, Zn^II, Cd^II) were prepared and characterized by IR, elemental analysis, absorption spectra and FAB mass spectra. The ferrocenyl-substituted macrocyclic ligand was characterized by single crystal X-ray diffraction analysis. The superconjugative effect of the cyclopentadienyl (CP) rings increase the activity of the hydrogen atoms in the tetra-azacyclotetradecane macrocyclic ligand. The imine nitrogen atoms lose two protons and coordinate to the metal. The electrochemical properties of these compounds are discussed.     

Synthesis,Characterization, and Electrochemical Properties of a Novel Macrocylic Ligand and its Transition Metal Complexes

Summary.  2,3-Dibromo-6,7,13,14,15,16,22,23-octahydro-14,15-bis-(hydroxyimino)-tribenzo [e,k,q][1,4,7,10,13,16]tetraoxadiazacyclohexadecine (LH₄) was prepared by condensation of 1,2-bis-(2′-aminophenoxyethoxy)-4,5-dibromobenzene with cyanogen-di-N-oxide. Mono-, di-, and trinuclear transition metal complexes of this ligand ((LH₃)₂Ni, (LH₃)₂Zn, (LH₃)₂Co, (LH₃)₂Cu, (LH₃)₂Fe, (LH₃)₂(UO₂)₂(OH)₂, (LH)₂Cu₃, (LH)₂Co₃) were synthesized under basic conditions. The electrochemical properties of the mono- and dinuclear complexes were studied by cyclic voltammetry in DMSO solution containing TBAP. The results showed that all redox processes are based on the metal center and the oxime ligands stabilize the Ni(III), Fe(III), Co(III), and Cu(III) species formed during oxidation. The Fe(II) and U(VI)O₂ complexes displayed a different behaviour: a reduction peak with the corresponding anodic signal during the reverse scan was observed. The oxime moiety also stabilizes U(V)O₂ which forms during the reduction process of the uranyl complex. Cu(II) was adsorbed on the electrode surface upon scanning cathodically. Received August 20, 2001. Accepted (revised) October 17, 2001     

Synthesis of Nitrido(phthalocyaninato)metal(V) Complexes RnPcMN (M = Re,Mo, W) and New Compounds with Nitrido‐Bridges between Rhenium and Elements of the Third Main Group

New tetra‐ and octasubstituted nitrido(phthalocyaninato)metal(V) complexes R_nPcMN (M = Re, Mo, W) were synthesized to obtain soluble nitrido‐bridged phthalocyanines. Phthalocyanines with nitrido bridges between rhenium and boron, aluminium, gallium and indium, respectively, were synthesized from nitrido(tetra‐tert.‐butylphthalocyaninato)rhenium(V) complex, tBu₄PcReN and suitable electrophilic reagents like BCl₃, B(C₆F₅)₃, BPh₃, BEt₃, AlCl₃, GaCl₃, GaBr₃, InCl₃, etc. The nitrido‐bridged compounds prepared show different stabilities depending on the substituents at the boron atom. Additionally, the possibility to increase the nucleophilicity of (C₅H₁₁)₈PcWN by reducing this complex with C₈K was studied. The reaction of the reduced complex with electrophiles, e.g. with tBuMeSiCl, Ph₃SiCl and Me₃GeCl indicates the formation of nitrogen‐bridged complexes.