Complexation of iminodisuccinic acid (IDS) and 3-hydroxy-2,2′-iminodisuccinic acid (HIDS) with Cd2+, Hg2+, and Pb2+ in aqueous solution

In a search for environmentally friendly metal-chelating ligands for industrial applications, the protonation and complex formation equilibria of iminodisuccinic acid (IDS) and 3-hydroxy-2,2′-iminodisuccinic acid (HIDS) with Cd²⁺, Hg²⁺, and Pb²⁺ in aqueous 0.1?mol?L^?1 NaNO₃ solution were studied at 25°C by potentiometric titration. Models for complexation and stability constants of the different complexes were determined for each metal ion using the computer program SUPERQUAD. In all cases, complex formation was dominated by stable ML^2? complexes.     

Impact of metal ions (Cr3+, Co2+, Ni2+, Cu2+ and Zn2+) substitution on the structural,magnetic and catalytic properties of substituted Co–Mn ferrites synthesized by sol–gel route

Journal of Sol-Gel Science and Technology - Manganese substituted cobalt ferrites (CoMn x Fe2?x O4, x?=?0.2, 0.4, 0.6, 0.8 and 1.0) synthesized using sol gel autocombustion method...     

A comparative study of interplay effects between the cation-π and intramolecular hydrogen bond interactions in the various complexes of methyl salicylate with Mn+, Fe2+, Co+, Ni2+, Cu+, and Zn2+ cations

Structural Chemistry - The interplay among two important noncovalent interactions involving aromatic ring is studied by means of density functional theory (DFT) calculations on complexes of methyl...     

Study of the state of uranoarsenates MII(AsUO6)2·nH2O(MII = Mn2+, Co2+, Ni2+, Cu2+, Zn2+, Cd2+, Pb2+) in aqueous solutions

State of uranoarsenates M^II(AsUO₆)₂·nH₂O (M^II = Mn, Co, Ni, Cu, Zn, Cd, Pb) in aqueous solutions in a wide range of acidity (pH 0?C14) was studied. Acid-base boundaries of existence of the compounds were estimated, products of conversion were identified, and solubility of M^II(AsUO₆)₂·nH₂O was determined. On the basis of the obtained data the solubility products and Gibbs functions of formation of uranoarsenates, and the solubility curves were calculated, phase diagrams of uranium(VI) and arsenic(V) in solutions and in equilibrium solid phases were constructed with the use of the equilibrium thermodynamics technique.     

Thermodynamic quantities for the interaction of Cl− with Mg2+, Ca2+ and H+ in aqueous solution from 250 to 325°C

The aqueous reactions, Mg²⁺+Cl^–=MgCl⁺, Ca²⁺+Cl^–=CaCl⁺, and H⁺ +Cl^–=HCl(aq), were studied as a function of ionic strength at 250, 275, 300, and 325°C using a flow calorimetric technique. The logK, H, S and C_p values were determined from the fits of the calculated and experimental heast. The data were reduced assuming a known functionality of the activity coefficient. Hence, the logK, H, S and C_p values determined in this study are dependent on the activity coefficient model used. These thermodynamic values were compared with literature results. The logK values for the formation of MgCl⁺ agree reasonably well with those reported in the literature. The logK values for CaCl⁺ formation agree reasonably well with those reported in the literature at 300 and 325°C. At lower temperatures, the agreement is poorer. The logK values for the formation of HCl(aq) are generally lower than those reported in the literature. The logK, H, S and C_p values for all three ion association reactions are positive and increase with temperature over the temperature range studied. These values are the first determined calorimetrically for the formation of MgCl⁺ and CaCl⁺ in the temperature range 275–325°C.Presented at the Second International Symposium on Chemistry in High Temperature Water, Provo, UT, August 1991.     

Mechanism of simultaneous removal of Ca2+, Ni2+, Pb2+ and Al3+ ions from aqueous solutions using Purolite® S930 ion exchange resin

The sorption mechanism of Ca²⁺, Ni²⁺, Pb²⁺, and Al³⁺on ion exchange resin S930 has been studied as a function of pH in both mono-component and quaternary systems at ion ratio 1:1:1:1. The equilibrium of ion exchange process in mono-component systems has been followed as an adsorption process and it was tested for Langmuir and Freundlich isotherm equations. The selectivity coefficient of the resin for these cations varied in different manners depending on the pH range. The structural characteristics of pores in the initial resin and the resin after contact with synthetic solutions at pH 3.03 and 3.95 have been investigated by using SEM and EDAX techniques.     

Front Cover: Method development for the investigation of Mn2+/3+, Cu2+, Co2+, and Ni2+ with capillary electrophoresis hyphenated to inductively coupled plasma–mass spectrometry

The lifetime of lithium ion batteries (LIBs) decreases under continuous cycling due to various degradation processes, such as dissolution of transition metals (TMs) from the electrodes. Therefore, suitable methods to analyze the oxidation states of TMs are mandatory to better understand the dissolution mechanisms of TMs from positive and negative electrodes (LIBs). To investigate the dissolution of Mn²⁺ and Mn³⁺ in electrolytes of LIBs, a previously implemented capillary electrophoresis (CE) method with UV/Vis spectroscopy detection was further developed with the aim of higher sensitivities and additional detection of other dissolved divalent TMs such as Co²⁺, Ni²⁺, and Cu²⁺. Therefore, inductively coupled plasma–mass spectrometry was applied instead of UV/Vis for detection. This also allows the use of Ga³⁺ instead of the previously used Cu²⁺ as an internal standard, which solves the limitation of this method for cycled LIBs due to copper dissolution from the copper-based current collector. The CE buffer based on sodium diphosphate as complexing agent for the stabilization of Mn³⁺ and cetyltrimethylammonium bromide as dynamic capillary wall modifier was optimized in terms of concentrations and pH. Finally, both manganese species and Co²⁺, Ni²⁺, and Cu²⁺ could be analyzed within 15 min. With this improved method, the dissolution of TMs in LIBs for positive electrode materials such as LiNi_0.5Mn_1.5O₄ (LNMO) or LiNi_xCo_yMn_zO₂ (NCM, x + y + z = 1) can be studied in future in more detail.     

多孔磁体甲酸盐[M3(HCOO)6](M=Mn2+,Fe2+,Co2+,Ni2+,Fe2+/Zn2+)的研究

综述了近年来我们在多孔磁体甲酸盐系列[M3(HCOO)6](M=Mn2 ,Fe2 ,Co2 ,Ni2 ,Fe2 /Zn2 )获得的研究结果.这些多孔磁体可以在常温下用温和的溶液化学方法制备获得,它们的结构是以MM4四面体为节点的金刚石多孔骨架,呈现了很好的热稳定性、多孔性、广谱的客体包合性能和稳定性.由于客体的包合对多孔磁性骨架的结构参数产生影响以及客体和骨架之间的弱氢键相互作用,这些多孔磁体表现了丰富的和客体调控的磁性质.混合金属的多孔磁体[FexZn3-x(HCOO)6]表现了随着Zn2 的含量增加而发生的由三维磁有序到自旋玻璃、再到超顺磁体、最后到顺磁体的渐次转变.     

Synthesis and crystal structure of a Zn(II) metal-organic framework based on 1,3,5-benzenetricarboxylate and 4,4′-bis(1-imidazolyl)biphenyl ligands: selective sensing of Mn2+ and Fe3+ ions in aqueous solution

Abstract

A new metal-organic framework (MOF), {[Zn₃(btc)₂(bimb)₂(H₂O)₂](H₂O)₃}_n (1), where H₃btc =1,3,5-benzenetricarboxylate and bimb = 4,4′-bis(1-imidazolyl)biphenyl, has been synthesized and characterized using single-crystal X-ray diffraction, IR spectroscopy, elemental, thermogravimetric, and photoluminescent analysis. X-ray diffraction crystallographic analyses indicate that 1 displays two types of Zn centers with a distorted pyramidal and a perfectly octahedral coordination sphere. The fully deprotonated btc^3? ligand coordinates four Zn ions with two carboxylate groups having bidentate chelate modes and one binds µ₂-η¹:η¹; bimb serves as a μ₂-bridging ligand in 1, resulting in a new three-dimensional (3-D) metal-organic framework with an uncommon trinodal 4-connected network with a Schäfli symbol of (6⁵ 10)₂(6² 8 10³)₃(7³ 8 12) topology. In the crystal, a 3-D supramolecular architecture is further formed by O–H···O hydrogen bonds, C–H···O interactions, C–H···π as well as π···π stacking. 1 shows intense fluorescence in the solid state and exhibits high selectivity for Mn²⁺ and Fe³⁺ ions through fluorescence enhancement and the quenching effect in aqueous solutions at room temperature, respectively.     

The pK 2 * for the dissociation of H2SO3 in NaCl solutions with added Ni2+, Co2+, Mn2+, and Cd2+ at 25°C

The pK ₂ ^* for the dissociation of sulfurous acid from I=0.5 to 6.0 molal at 25°C has been determined from emf measurements in NaCl solutions with added concentrations of NiCl₂, CoCl₂, McCl₂ and CdCl₂ (m=0.1). These experimental results have been treated using both the ion pairing and Pitzer's specific ion-interaction models. The Pitzer parameters for the interaction of M²⁺ with SO ₃ ^2? yielded $$\begin{gathered} \beta _{NiSO_3 }^{(0)} = - 5.5, \beta _{NiSO_3 }^{(1)} = 5.8, and \beta _{NiSO_3 }^{(2)} = - 138 \hfill \\ \beta _{CoSO_3 }^{(0)} = - 12.3, \beta _{CoSO_3 }^{(1)} = 31.6, and \beta _{CoSO_3 }^{(2)} = - 562 \hfill \\ \beta _{MnSO_3 }^{(0)} = - 8.9, \beta _{MnSO_3 }^{(1)} = 18.7, and \beta _{MnSO_3 }^{(2)} = - 353 \hfill \\ \beta _{CdSO_3 }^{(0)} = - 7.2, \beta _{CdSO_3 }^{(1)} = 13.8, and \beta _{CdSO_3 }^{(2)} = - 489 \hfill \\ \end{gathered} $$ The calculated values of pK ₂ ^* using Pitzer's equations reproduce the measured values to within ±0.01 pK units. The ion pairing model yielded $$\begin{gathered} logK_{NiSO_3 } = 2.88 and log\gamma _{NiSO_3 } = 0.111 \hfill \\ logK_{CoSO_3 } = 3.08 and log\gamma _{CoSO_3 } = 0.051 \hfill \\ logK_{MnSO_3 } = 3.00 and log\gamma _{MnSO_3 } = 0.041 \hfill \\ logK_{CdSO_3 } = 3.29 and log\gamma _{CdSO_3 } = 0.171 \hfill \\ \end{gathered} $$ for the formation of the complex MSO₃. The stability constants for the formation of MSO₃ complexes were found to correlate with the literature values for the formation of MSO₄ complexes.     

Absorptiometric and spectrofluorimetric study of the inclusion complexes of 2-naphthyloxyacetic acid and 1-naphthylacetic acid with β-cyclodextrin in aqueous solution

The inclusion complexes of 2-naphthyloxyacetic acid (NOA) and 1-naphthylacetic acid (NAA) with -cyclodextrin have been investigated in aqueous solution. It has been demonstrated that the naphthalene derivatives form 1:1 complexes when included in the cyclodextrin. A possible structure is proposed, having an axial inclusion of the naphthalene derivatives. In the case of the -CD: NOA complex, the naphthyl moiety is included in the cyclodextrin and the acetic acid group protrudes from the cavity, while NAA is only partially included because of the steric effect of the group in position 1. Association constants of 560±100 M^–1 and 100±50 M^–1 have been calculated for the -CD: NOA and -CD: NAA complexes, making use of the increment in the fluorescene emission produced in the inclusion process.     

Benzothiazole-based heterodipodal chemosensor for Cu2+ and CN– ions in aqueous media

A simple and selective chemosensor, A, was developed for recognizing Cu²⁺. The emission spectra of receptor A showed a fluorescence quenching response upon addition of Cu²⁺ with a low detection limit of 4.51 nM, significantly less than the WHO recommended guideline for drinking water. In addition, the formed A?Cu²⁺ complex was examined for secondary sensing of anions. The A?Cu²⁺ complex showed selectivity for CN^– via a recovering emission profile of A.     

Stability prediction of Cu2+, Ni2+ and Zn2+ N-salicylidene-aminoacidato complexes by models based on connectivity index 3 χ v

This paper presents models for the estimation of stability constants (K ₁ and β ₂) of nickel(II), copper(II) and zinc(II) mono- and bis-complexes with 5 Schiff bases (salicylideneglycine, salicylidenealanine, salicylideneserine, salicylidenephenylalanine, and salicylidenetyrosine). The models were based on the molecular-graph theory and valence molecular connectivity index of the 3^rd order, ³χ ^v , derived from it. Univariate linear models were developed for each metal separately, while in the common models for two and three metals, the indicator variable, In, was introduced. The standard error of models for the log K ₁ constant was less than 0.12, while for log β ₂ models, the S.E. did not exceed 0.14.      

Naphthalene and pyrrole substituted guanidine in selective sensing of Cu2+, Hg2+, Pb2+ and CN− ions under different conditions

Naphthalene and pyrrole substituted guanidine 1 has been designed and synthesised. Compound 1 efficiently distinguishes Cu²⁺, Hg²⁺ and Pb²⁺ ions by exhibiting different responses in fluorescence. While compound 1 exhibited turn-on emission selectively in the presence of Hg²⁺ and Pb²⁺ ions in CH₃CN and CH₃CN–H₂O (1:1, v/v), respectively, it showed decrease in emission upon interaction with Cu²⁺ ion in CH₃CN. Furthermore, the Cu-1 ensemble has been established as a potential probe for selective detection of CN^? ion over a series of other anions involving colour change (in ordinary light: colourless to light yellow and under UV light: colourless to sky blue). Theoretical insight has been invoked to understand the mode of metal–ligand interaction.     

Interactions of some α-l-glutamic acid oligomers and polymers with Cu(II) in aqueous solution

The interactions between copper ions and various α-l-glutamic polyacids (DP 6,27,50,300) has been studied, in aqueous solution with an external salt NaClO₄ 0.1 M at 25°C. Both measurements of pH and pCu allow, according to Bjerrum's and Marinsky's methods, the display of MA and MA₂ species and the calculation of their formation constants. These last are depending on the DP and, concerning DP 300, the formation constants vary with the respective metallic and polyacid concentrations. The formation of polynuclear species has been demonstrated for this DP only.     

Synthesis,characterization, and interaction with DNA of Cu(II) and Zn(II) complexes with 2,2′-bipyridyl-6,6′-dicarboxylic acid

Two transition metal complexes, [Cu₂(bpdc)₂H₂O]·2H₂O (1) and Zn(bpdc)(H₂O)₂ (2) (H₂bpdc?=?2,2′-bipyridine-6,6′-dicarboxylic acid), were synthesized and characterized by elemental analysis, IR spectroscopy, and single-crystal X-ray diffraction. Complex 1 is dinuclear with two five-coordinate cupric ions and 2 is mononuclear with one six-coordinate zinc. Interactions of 1 and 2 with DNA have been investigated using UV–Vis absorption spectra. The cleavage reaction on DNA has been monitored by agarose gel electrophoresis.     

Brushite (Ca,M)HPO4, 2H2O doping with bioactive ions (M = Mg2+, Sr2+, Zn2+, Cu2+, and Ag+): a new path to functional biomaterials?

Dicalcium phosphate dihydrate, DCPD (CaHPO₄·2H₂O), brushite, is an important calcium phosphate compound encountered in mineralized tissues and used in medicine, especially in bone cement formulations. However, the use of DCPD as direct implantable biomaterial has not received dedicated attention. In addition, the possibility to dope DCPD with biologically active ions to modulate its performances was not systematically explored. We have investigated in depth the doping of DCPD with Mg²⁺, Sr²⁺, Zn²⁺, Cu²⁺, and Ag⁺ ions. Clear modifications in terms of chemical composition, particle size, pore distribution, crystal morphology, and affinity for water were pointed out. Then, the samples were cultured with human adipose-derived stem cells to explore cytotoxicity and proliferation. Various behaviors were noticed dependent on the incorporated metal ions. Such DCPD compounds associated with bioactive metal ions, and particularly Ag⁺ and Zn²⁺, appear promising as a new family of reactive materials for use, as such or in combination, in bone-related applications.     

Thermodynamic characteristics of complex formation by Ni2+ ions and glycylglycine in aqueous solutions of KNO3 at 288–308 K

Heat effects of the interaction between glycylglycine and nickel (II) nitrate solutions are measured by direct calorimetry at different pH values and metal: ligand ratios in the temperature range of 288.15 to 308.15 K. KNO₃ is used as the background electrolyte. The heat effects of diluting the nickel nitrate solution in solutions of the background electrolyte are determined in order to make the appropriate corrections. The standard thermodynamic characteristics of complex formation by peptides and nickel (II) ions in aqueous solution are calculated. Standard enthalpies of the formation of complex particles NiPep⁺, NiPep₂, and NiPep ₃ ^? are determined for the first time.