中孔MCM-41负载Ru纳米粒子催化剂用于超声辐射下芳烃选择氧化反应（英文）

以中孔MCM-41为载体制得均一分散的粒径约5 nm的Ru纳米粒子催化剂MCM-41-Ru,采用电感耦合等离子体、透射电镜、能量散射谱、X射线衍射和N_2吸附-脱附法对其进行了表征,并将其作为可重复使用高效催化剂用于超声辅助芳烃选择氧化反应.结果表明,在超声辐射和KBrO_3为氧化剂条件下,MCM-41-Ru催化剂加速了氧化反应,并以较高产率得到目的产物.回收的催化剂用于下次反应时活性保持不变,但其活性中心性质发生变化.     

介孔分子筛MCM-41表面的有机胺功能化及其应用

采用γ-胺丙基三甲氧基硅烷与表面硅羟基的反应,对介孔分子筛MCM-41进行了有机胺功能化.并对其进行了表征.XRD、比表面积测定、元素分析、TG、FT-IR和TEM的测定结果均表明,MCM-41表面成功地接枝上了有机胺功能基团而六方结构特征基本保持.在有机胺功能化的MCM-41上固载Ru基催化剂,并将其用于CO2加H2合成HCOOH反应,所显示的活性优于相应的均相催化剂,并且该催化剂具有较好的回收再用性能.     

负载型铜系分子筛催化剂在苯酚羟基化反应中的应用

以介孔分子筛MCM-41、MCM-48和AIMCM-41以及微孔分子筛Naβ和MOR为载体,分别采用有机官能团化法和分步水热合成法制备了系列负载型催化剂,考察了其在苯酚羟基化反应中的活性;得到了不同载体类型、不同负载方法及不同助剂与反应活性的对应关系．结果表明：以微孔分子筛为载体的催化剂对副产物有明显的抑制作用．介孔分子筛AIMCM-41,MCM-41,MCM--48为载体时,催化剂在苯酚羟基化反应中的活性顺序为AIMCM-41〉MCM-48〉MCM-41,助剂镧和钴的引入可以有效抑制副产物的产生．     

PtSn/Al2O3/MCM-41催化剂的丙烷脱氢催化性能

用微型催化反应装置评价, 并结合X射线粉末衍射(XRD)、表面积和孔结构测试、程序升温还原(TPR)、氢化学吸附和热重分析等方法研究了负载型PtSn/γ-Al2O3, PtSn/MCM-41和PtSn/Al2O3/MCM-41催化剂的丙烷脱氢反应催化性能. 发现PtSn/Al2O3/MCM-41催化剂具有较PtSn/MCM-41催化剂高的丙烷脱氢反应活性和较PtSn/γ-Al2O3催化剂高的反应稳定性. 实验结果表明, 纯硅MCM-41载体表面的锡物种因与载体相互作用较弱故易被还原, 导致铂金属分散度和催化剂的丙烷脱氢活性较低. 用Al2O3修饰MCM-41可以增强Sn物种与Al2O3/MCM-41载体之间的相互作用, 提高PtSn/Al2O3/MCM-41催化剂铂金属分散度和丙烷脱氢催化活性. 并且, 积炭后的PtSn/Al2O3/MCM-41催化剂具有较高的铂金属表面裸露度, 故具有较高的丙烷脱氢反应稳定性. PtSn/Al2O3/MCM-41催化剂优良的丙烷脱氢催化性能可能不仅与Sn-载体Al2O3/MCM-41较强的相互作用有关, 而且与Al2O3/MCM-41载体的介孔结构有关.     

PtSn/Al2O3/MCM-41催化剂的丙烷脱氢催化性能

用微型催化反应装置评价,并结合X射线粉末衍射(XRD)、表面积和孔结构测试、程序升温还原(TPR)、氢化学吸附和热重分析等方法研究了负载型PtSn/γ-Al2O3,PtSn/MCM-41和PtSn/Al2O3/MCM-41催化剂的丙烷脱氢反应催化性能.发现PtSn/Al2O3/MCM-41催化剂具有较PtSn/MCM-41催化剂高的丙烷脱氢反应活性和较PtSn/γ-Al2O3催化剂高的反应稳定性.实验结果表明,纯硅MCM-41载体表面的锡物种因与载体相互作用较弱故易被还原,导致铂金属分散度和催化剂的丙烷脱氢活性较低.用Al2O3修饰MCM-41可以增强Sn物种与Al2O3/MCM-41载体之间的相互作用,提高PtSn/Al2O3/MCM-41催化剂铂金属分散度和丙烷脱氢催化活性.并且,积炭后的PtSn/Al2O3/MCM-41催化剂具有较高的铂金属表面裸露度,故具有较高的丙烷脱氢反应稳定性.PtSn/Al2O3/MCM-41催化剂优良的丙烷脱氢催化性能町能不仅与Sn-载体Al2O3/MCM-41较强的相互作用有关,而且与Al2O3/MCM-41载体的介孔结构有关.     

MCM-41分子筛的表面修饰及其催化合成乙酸异戊酯

通过后合成处理将苄基、三甲基硅烷基和磺酸基接枝到MCM-41分子筛上,制备了一种新型的有机-无机杂化S-B-MCM-41催化剂.采用X射线衍射、低温N2吸附-脱附和酸碱滴定对样品的结构和质子酸量进行了表征和测定.结果表明,S-B-MCM-41催化剂较好地保持了MCM-41分子筛的介孔结构,BET比表面积高达798m2/g,质子酸量为4.0mmol/g.将S-B-MCM-41催化剂用于乙酸与异戊醇合成乙酸异戊酯的反应,考察了各种反应条件对酯化率的影响.在乙酸用量为0.1mol,异戊醇用量为0.15mol,催化剂用量为0.2g,带水剂甲苯为15ml,反应温度为110～125℃,反应时间为2h的优化条件下S-B-MCM-41上的酯化率可达99%以上;而MCM-41分子筛上的酯化率仅为54%.经3次重复使用后,S-B-MCM-41催化剂上的酯化率依然保持在90%以上.初步探讨了S-B-MCM-41催化剂催化合成乙酸异戊酯的反应机理.     

BF3*Et2O/MCM-41固体酸催化剂及其催化性能的研究

MCM-41因其具有规整的六方一维孔道、高比表面积及可作为催化剂或催化剂载体的优良性能而备受关注[1]. 但由于铝取代的MCM-41具弱酸性, 将其作为酸催化剂的研究尚不多见. 为此, 对MCM-41进行表面改性或负载酸性物质是行之有效的方法. 本文以BF3*Et2O对MCM-41分子筛进行表面改性, 并采用XRD和原位FTIR技术对BF3*Et2O/MCM-41催化剂进行表征; 探讨了催化剂制备条件对环氧氯丙烷与异丁醇的缩合反应性能的影响.     

镍(II)配合物官能化的MCM-41催化分子氧环氧化苯乙烯

制备了镍(II)席夫碱配合物官能化的MCM-41多相催化剂MCM-41-Ni.利用X射线粉末衍射、氮气物理吸附脱附、红外光谱、热重、电感耦合等离子体原子发射光谱、元素分析和透射电镜等方法对催化剂进行了表征.以氧气为氧化剂,MCM-41-Ni在催化环氧化苯乙烯的反应中表现出较高的催化活性;苯乙烯的转化率为95.2%,环氧苯乙烷的选择性为66.7%.系统地研究了反应温度、催化剂用量、溶剂以及反应时间对反应性能的影响.催化剂经过4次循环仍然表现出较好的稳定性和催化活性.     

Cr/MCM-41催化剂的制备及其用于丙烷非氧化脱氢反应

实验分别采用连续吸附法和传统浸渍法制备Cr/MCM-41催化剂（分别记为Cr/MCM-41-ad和Cr/MCM-41-imp）,将制备的Cr/MCM-41催化剂用于丙烷非氧化脱氢制丙烯反应,并对反应过程中的温度、压力、空速等反应条件进行优化,在合适的条件即反应温度为630℃、压力为0.1 MPa、空速为4500 mL·h^-1·g^-1下比较两种方法制备的催化剂在丙烷脱氢制丙烯反应的催化性能.我们采用XRD、SEM-mapping、XPS、UV-vis、H₂-TPR等表征手段对催化剂上α-Cr₂O₃晶体粒径、活性组分及分布等进行表征分析,结果表明Cr/MCM-41-ad和Cr/MCM-41-imp中同时均存在Cr（VI）、Cr（Ⅲ）和α-Cr₂O₃.其中XRD和SEM-Mapping结果可知,Cr/MCM-41-ad上获得的α-Cr₂O₃晶体粒径较小且分散性好;通过UV-vis、XPS和TPR结果证明Cr/MCM-41-imp催化剂存在非活性孤立态Cr（VI）,较难还原,影响其反应活性.相比之下,吸附法制备的催化剂使Cr高分散,可避免形成非活性孤立态Cr（VI）,进而提高丙烷脱氢催化活性.因此,吸附法制备的铬基催化剂用于丙烷脱氢制丙烯有一定的借鉴作用.     

在SO2-4/ZrO2-MCM-41上苯与丙烯的烷基化

硅基介孔材料M41S因具有较大的孔径和比表面积而引起从事多相催化、吸附分离以及非金属材料等领域研究人员的极大关注[1～4]. 其中MCM-41是最具代表性的成员之一, 但纯硅的MCM-41因无活性中心而不能用于催化领域. 最近已有将SO2-4/ZrO2超强酸及杂多酸负载到MCM-41上, 使其成为比表面积大、孔结构规则和环境友好催化剂的研究报道[5～7]. 本文在弱碱体系中制备了具有介孔孔径的纯硅MCM-41, 用浸渍法将有超强酸性质的活性中心SO2-4/ZrO2引入其中, 并用XRD, IR和Py-IR等技术对其进行了表征, 并考察了在此催化剂上苯与丙烯气相流动烷基化反应, 对目的反应的催化性能进行了评价.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.