Harmonic repetition-rate femtosecond optical parametric oscillator

We report on a femtosecond optical parametric oscillator (OPO) with a repetition rate of 1 GHz, which is 12 times that of the pump laser used. We also introduce a novel method for operating an OPO with a high harmonic repetition rate which is not determined by the cavity length of the OPO, but rather the cavity length difference between the OPO and its pump laser. Operation of an OPO at 4-times the harmonic repetition rate has been carried out to show the feasibility of this method. The new approach paves the way for constructing a femtosecond OPO working at repetition rates of 10 GHz, or higher, when the pump laser used has a relatively low repetition rate. Received: 26 October 2001 / Revised version: 11 Januar 2002 / Published online: 14 March 2002     

A pulsed optical parametric oscillator, based on periodically poled lithium niobate (PPLN), for high-resolution spectroscopy

-1 ), approaching the limit imposed by the Fourier transform of the pulse duration. Received: 31 August 1998     

High-repetition-rate eyesafe intracavity optical parametric oscillator

Received: 15 December 1997/Revised version: 27 April 1998     

Narrow-band terahertz wave generation and detection in one periodically poled lithium niobate crystal

In this article, we present studies on therahertz (THz) wave generation and frequency up-conversion in a periodically poled lithium niobate (PPLN) crystal. A frequency at 1.37 THz was generated as femtosecond pump pulses passed through a PPLN crystal with grating periods of 30 μm. The pump-induced THz wave interacts with the probe wave in the crystal by frequency mixing. The frequency up-converted THz wave is easily detected by a normal photodiode. A new scheme for generation and detection of THz wave in one non-linear crystal was proposed.     

Periodic poling of magnesium-oxide-doped stoichiometric lithium niobate grown by the top-seeded solution method

Magnesium-oxide-doped stoichiometric lithium niobate has been produced using the technique of top-seeded solution growth from a lithium-rich melt. Optical tests, performed with a combination of argon-ion laser lines, have confirmed a previously published result (at 532 nm) that this material has superior resistance to photorefractive damage. This material has been shown, for the first time, to be amenable to periodic poling. Optical parametric oscillator tests have shown that this material maintains the advantages of periodically poled, congruent, un-doped lithium niobate while showing no evidence of photorefractive damage under typical operating conditions. Operating wavelengths as a function of quasi-phase-matching period and temperature have been measured for the optical parametric oscillator, providing useful new information about refractive-index dispersion in this material. This work establishes periodically poled, magnesium-oxide-doped stoichiometric lithium niobate as a viable material for nonlinear optics. Received: 28 June 2000 / Revised version: 12 September 2000 / Published online: 7 February 2001     

High-power picosecond LiB3O5 optical parametric oscillators tunable in the blue spectral range

The paper reports on an experimental investigation and numerical analysis of noncritically and critically phasematched LiB₃O₅ (LBO) optical parametric oscillators (OPOs) synchronously pumped by the third harmonic of a cw diode-pumped mode-locked Nd:YVO₄ oscillator–amplifier system. The laser system generates 9.0 W of 355-nm mode-locked radiation with a pulse duration of 7.5 ps and a repetition rate of 84 MHz. The LBO OPO, synchronously pumped by the 355-nm pulses, generates a signal wave tunable in the blue spectral range 457–479 nm. With a power of up to 5.0 W at 462 nm and 1.7 W at 1535 nm the conversion efficiency is 74%. The OPO is characterized experimentally by measuring the output power (and its dependence on the pump power, the transmission of the output coupler and the resonator length) and the pulse properties (such as pulse duration and spectral width). Also the beam quality of the resonant and nonresonant waves is investigated. The measured results are compared with the predictions of a numerical analysis for Gaussian laser and OPO beams. In addition to the blue-signal output visible-red 629-nm radiation is generated by sum-frequency mixing of the 1.535-μm infrared idler wave with the residual 1.064-μm laser radiation. A power of 1.25 W of 1.535-μm idler radiation and 5.7 W of 1.064-μm laser light generated a red 629-nm output power of 2.25 W. Received: 2 February 2000 / Revised version: 28 July 2000 / Published online: 22 November 2000     

Low-pump-threshold tunable optical parametric oscillator using periodically poled MgO:LiNbO3

We fabricated and characterized periodically poled MgO:LiNbO₃ device with five gratings in 0.5 μm increments from 29 μm to 31 μm for optical parametric oscillator (OPO). The OPO operation threshold is 30 μJ using this device with a 50 mm effective length. At 560 mW input pump power, we have achieved 300 mW of the total output power, and the conversion efficiency is 54%. Multi-periods and temperatures tuning of the OPO yields a signal wavelength range from 1.45 to 1.72 μm and an idler wavelength range from 2.8 to 4.05 μm in the mid infrared.     

Temporal behavior of a high repetition rate infrared optical parametric oscillator based on periodically poled materials

The temporal behavior of a nanosecond pulsed singly resonant periodically poled lithium niobate optical parametric oscillator has been studied both theoretically and experimentally. Taking into account the cylindrical symmetry of the system, a numerical model based on the Hankel transform has been developed. Good agreement is obtained between experiment and simulation. Moreover, the computation time is reduced roughly by a factor of 60 compared to the usual simulation software. Received: 23 April 2001 / Published online: 19 September 2001     

Collinear broadband optical parametric generation in periodically poled lithium niobate crystals by group velocity matching

Collinear broadband optical parametric generation (OPG) using periodically poled lithium niobate (PPLN) crystals were designed and experimentally demonstrated with the quasi-phase matching (QPM) periods of 21.5, 24.0, and 27.0 μm. The broad gain bandwidth was accomplished by choosing a specific set of the period and the pump wavelength that allows the group velocities of the signal and the idler to match close to the degeneracy point. OPG gain bandwidth and also the spectral region could be controlled by proper design of QPM period and pump wavelength. The total OPG gain bandwidth of 600, 900, and 1200 nm was observed for the PPLN devices with QPM periods of 21.5, 24.0, and 27.0 μm, respectively. We have also observed multiple color visible generation whenever the OPG spectrum was significantly broad. From the visible peaks of the three PPLN samples, it is found that broad gain bandwidth is crucial in the temperature-insensitive collinear simultaneous RGB generation from a single crystal.     

Mapping of periodically poled crystals via spontaneous parametric down-conversion

A new method for characterization of periodically poled crystals is developed based on spontaneous parametric down-conversion. The method is demonstrated on crystals of Y:LiNbO₃, Mg:Y:LiNbO₃ with non-uniform periodically poled structures, obtained directly under the Czochralski growth procedure and designed for application of 1.064 μmpumped OPO in the mid-infrared range. Infrared dispersion of refractive index, effective working periods and wavelengths of OPO were determined by special treatment of frequency-angular spectra of spontaneous parametric down-conversion in the visible range. Two-dimensional mapping via spontaneous parametric down-conversion is proposed for characterizing spatial distribution of bulk quasi-phase matching efficiency across the input window of a periodically poled sample.     

Synchronously pumped optical parametric oscillators

Recent work on the development of high-repetition-rate, synchronously pumped picosecond and femtosecond Optical Parametric Oscillators (OPOs) is reviewed. With KTP, BBO or LBO crystals and solid-state pumps such as cw mode-locked Ti:Sapphire, Nd:YAG or Nd:YLF lasers, the singly resonant OPOs or their nonlinear optical accessories yield pulses as short as 40 fs, average powers up to hundreds of milliwatts, and tunability from 200 nm to > 10 µm.     

Temperature-tuned difference-frequency mixing in periodically poled KTiOPO4

4 (PPKTP). We generated 12 μW of radiation tunable around 1.6 μm by difference-frequency mixing of the outputs of a frequency-doubled Nd:YLF laser at 523 nm (240 mW) and a tunable Ti:sapphire laser near 760 nm (340 mW). A temperature tuning rate of 0.73 nm/°C for the generated wavelength and a FWHM temperature acceptance bandwidth of 6.9 °C cm was observed. The effective d₃₃ coefficient was estimated to be ∼5 pm/V. Received: 02 September 1998     

Fabrication of periodically poled lithium tantalate for UV generation with diode lasers

Fabrication of periodically poled lithium tantalate (PPLT) with periods as short as 1.3 μm for second harmonic generation (SHG) in the UV range and for optical parametric oscillators pumped at 532 nm is reported. Both the maximum crystal size of up to 40 mm and the minimum poling period of 1.3 μm are improvements on earlier results, achieved by optimizing the poling conditions and by using a novel electrode design consisting of electrode structures on both surfaces of the crystal. Single-pass SHG of a master oscillator power amplifier (MOPA) diode laser with an output power of 1.36 mW at 336 nm using a 16-mm-long PPLT crystal with a 1.5 μm poling period is reported. Received: 11 June 2001 / Published online: 18 July 2001     

Development of injection-seeded, pulsed optical parametric generator/oscillator systems for high-resolution spectroscopy

We report the development and application of pulsed optical parametric generator (OPG) and optical parametric oscillator (OPO) systems that are injection seeded with near-infrared distributed feedback diode lasers. The OPG is injection seeded at the idler wavelength without the use of a resonant cavity. Two counter-rotating, beta-barium-borate (β-BBO) crystals are used in the OPG. These crystals are pumped by the third harmonic, 355-nm output of an injection-seeded Nd:YAG laser. An OPO version of the system has also been developed by placing two flat mirrors around the two β-BBO crystals to form a feedback cavity at the signal wavelength. The OPO cavity length is not actively controlled. The output signal beam from the OPG or OPO is amplified using an optical parametric amplifier (OPA) stage with four β-BBO crystals. The frequency bandwidths of the signal and idler laser radiation from OPG/OPA and OPO/OPA systems have been determined to be slightly greater than 200 MHz. The temporal pulses from each system are smooth and near-Gaussian. High-resolution optical absorption measurements of acetylene (C₂H₂) were performed as another check of the frequency spectrum of the idler beam. The frequency-doubled signal output of the OPO/OPA system was used to perform high-resolution, single-photon, laser-induced fluorescence (LIF) spectroscopic studies of the (0,0) vibrational band of the A ²Σ⁺−X ²Π electronic transition of nitric oxide (NO) at low pressure. Excellent agreement was obtained between the theory and the experiment. The signal output of the OPG/OPA system was also used for sub-Doppler, two-photon LIF spectroscopic studies of the same vibration–rotation manifold of NO.This revised version was published online in August 2005 with a corrected cover date.     

Widely tunable femtosecond fiber optical parametric oscillator

The phase-matching condition in a fiber is discussed. A balance among the different orders of fiber dispersion can be found to achieve a widely tuning modulation instability gain for pumping around the normal dispersion regime. Three coupled nonlinear wave equations are used to simulate the femtosecond fiber optical parametric oscillator. The numerical results show that, through appropriate choice of dispersion, femtosecond pulses with a 180-nm tunable range can be generated when pump wavelength near a fiber’s zero-dispersion wavelength is tuned only 7 nm. Further tuning is limited by the walk-off between the pump and the signal pulses.     

Optical parametric oscillators for high pulse energy and high average power operation based on large aperture periodically poled KTP and RTA

We report on optical parametric oscillators (OPOs) based on large aperture periodically poled KTiOPO₄ (PPKTP) and RbTiOAsO₄ (PPRTA) pumped with high pulse energy and high average power Q-switched solid-state lasers. The OPOs were pumped with 1064-nm pulses of a diode-pumped Nd:YVO₄ laser at 20 kHz repetition rate. The emitted signal wavelengths were 1.72 μm and 1.58 μm and the idler wavelengths were 2.79 μm and 3.26 μm, respectively. Pumping the PPKTP OPO with 7.2 W and the PPRTA OPO with 8 W average power, 2 W and 1.3 W total OPO output powers were generated. Two-dimensional measurements of the total OPO output power, the signal wavelength and the signal bandwidth in dependence on the crystal location indicated a good uniformity of the quasiphasematching structure over the entire 3-mm-thick crystals. This allowed pumping with larger pump beams and therefore with pulse energies of tens of millijoules. Pumping with different flash-lamp-pumped lasers, good OPO performance and high output pulse energies could be achieved for all pump lasers. Maximum input pulse energies of 56 mJ gave output pulse energies of as much as 18 mJ. The temperature tuning behaviors of both OPOs were measured, showing excellent agreement with calculated temperature tuning curves. New equations for temperature dispersion in RTA are presented. These results show that large-aperture PPKTP and PPRTA crystals are well suited for tunable nanosecond OPO operation with multi-watt average pump power and several tens of millijoules pump pulse energies. Received: 7 September 2001 / Published online: 7 November 2001     

A 9.5-W 82-MHz-repetition-rate picosecond optical parametric generator with cw diode laser injection seeding

We report on an injection-seeded 9.5-W 82-MHz-repetition-rate picosecond optical parametric generator (OPG) based on a 55 mm long crystal of periodically poled lithium niobate (PPLN) with a quasi-phase-matching (QPM) grating period of 29.75 μm. The OPG is excited by a continuously diode pumped mode-locked picosecond Nd:YVO₄ oscillator-amplifier system. The laser system generates 7 ps pulses with a repetition rate of 82.3 MHz and an average power of 24 W. Without injection-seeding the total average output power of the OPG is 8.9 W, which corresponds to an internal conversion efficiency of 50%. The wavelengths of the signal and idler waves were tuned in the range 1.57–1.64 μm and 3.03–3.3 μm, respectively, by changing the crystal temperature from 150 °C to 250 °C. Injection seeding of the OPG at 1.58 μm with 4 mW of single frequency continuous-wave radiation of a distributed-feedback (DFB) diode laser increases the OPG output to 9.5 W (53% conversion efficiency). The injection seeding increases the pulse duration and reduces the spectral bandwidth. When pumped by 10 W of 1.06 μm laser radiation, the duration of the signal pulses increased from 3.6 ps to 5.5 ps while the spectral bandwidth is reduced from 4.5 nm to 0.85 nm. Seeding thus improved the time-bandwidth product from 1.98 to a value of 0.56, much closer to the Fourier limit. Received: 29 April 2002 / Published online: 8 August 2002     

Characteristics of a cw monolithic optical parametric oscillator

4 as a nonlinear crystal and obtained a pump threshold of 7 mW and an output power of 6 mW for a pump power of 40 mW. The OPO operated in a single longitudinal mode pair of a signal and an idler, over 1 h without mode hopping in the free-running condition. The signal and the idler wavelengths were tunable by 1 nm by changing the crystal temperature by 20 °C. The continuous tuning of the beat frequency between the signal and the idler was achieved by temperature tuning (slow control, 80 MHz/K) and E-field tuning (fast control, 0.75 MHz/V). We demonstrated the feasibility of frequency control by phase locking the beat frequency. The beat frequency could be successfully phase locked to a signal generated by a synthesizer through the electrooptic effect of the crystal. The phase locking could be maintained over 1 h. Received: 27 January 1998/Revised version: 9 March 1998     

Broadly tunable mid-infrared femtosecond optical parametric oscillator using all-solid-state-pumped periodically poled lithium niobate

We describe a high-repetition-rate femtosecond optical parametric oscillator (OPO) that was broadly tunable in the mid infrared. The all-solid-state-pumped OPO was based on quasi-phase matching in periodically poled lithium niobate. The idler was tunable from approximately 1.7 mum to beyond 5.4 mum, with maximum average power levels greater than 200 mW and more than 20 mW of average power at 5.4 mum. We used interferometric autocorrelation to characterize the mid-infrared idler pulses, which typically had durations of 125 fs. This OPO had a pumping threshold as low as 65 mW of average pump power, a maximum conversion efficiency of >35% into the near-infrared signal, a slope efficiency for the signal of approximately 60%, and a maximum pump depletion of more than 85%.     

High-efficiency,high-repetition-rate,temperature-tuning optical parametric oscillator based on periodically poled MgO-doped lithium niobate

We report a compact and viable source of high-efficiency, high-repetition-rate, temperature-tuning, mid-IR optical parametric oscillator (OPO) based on periodically poled MgO-doped lithium niobate (PPMgOLN) pumped by a homemade high power AOM Q-switched Nd:YVO₄ laser centered at 1.064 μm. With an optimal plane-concave resonator configuration, average output power of 5.7 W at 2.73 μm was obtained when the pump power was 25 W at the repetition rate of 80 kHz. The conversion efficiency from the 1.064 μm laser to the 2.73 μm laser was 22.8%. Temperature tuning of the OPO yielded a signal wavelength range from 1.67 to 1.75 μm and an idler wavelength in the range of 2.72 to 2.92 μm.