A new porous polymer for off-line preconcentration of chlorophenols from water

Summary A new porous polymer obtained by the copolymerization of two cross-linking agents: 1,4-di(methacryloyloxymethyl) naphthalene and divinylbenzene was used for the off-line preconcentration of chlorophenols from water solutions by solid-phase extraction. In order to establish its applicability to preconcentration the recoveries and breakthrough volumes of phenol, 2-; 3-chlorophenols; 2,3-; 2,4-dichlorophenols and 2,4,6-trichlorophenols were studied. The recoveries of the studied compounds were compared with those obtained for chemically bonded phases containing hexyl and octadecyl groups.     

Development and validation of a hydrophilic interaction liquid chromatographic method for determination of aromatic amines in environmental water

A simple, precise, and accurate hydrophilic interaction liquid chromatographic (HILIC) method has been developed for the determination of five aromatic amines in environmental water samples. Chromatography was carried out on a bare silica column, using a mixture of acetonitrile and a buffer of NaH₂PO₄–H₃PO₄ (pH 1.5, containing 10 mM NaH₂PO₄) (85:15, v/v) as a mobile phase at a flow rate of 1 mL min⁻¹. Aromatic amines were detected by UV absorbance at 254 nm. The linear range of amines was good (r² > 0.998) and limit of detection (LOD) within 0.02–0.2 mg L⁻¹ (S/N = 3). The retention mechanism for the analytes under the optimum conditions was determined to be a combination of adsorption, partition and ionic interactions. The proposed method was applied to the environmental water samples. Aromatic amines were isolated from aqueous samples using solid-phase extraction (SPE) with Oasis HLB cartridges. Recoveries of greater than 75% with precision (RSD) less than 12% were obtained at amine concentrations of 5–50 μg L⁻¹ from 100 mL river water and influents from a wastewater treatment plant (WWTP). The present HILIC technique proved to be a viable method for the analysis of aromatic amines in the environmental water samples.     

Determination of biogenic amines in wine after clean-up by solid-phase extraction

Summary A suitable method for the determination of 16 biogenic amines in wine has been developed. The method involves clean-up of wine samples using ion-exchange cartridges and a preconcentration step, under controlled vacuum, before derivatization of the amines by treatment with phthalaldehyde (PA) and reversedphase HPLC with gradient elution and fluorimetric detection. Linearity of response was obtained for all the biogenic amines from 100 g L^–1 to mg L^–1. Limits of detection for the amines were similar for all PA-derivatives (25–50 g L^–1) and the quantitation limits were about 0.1 mg L^–1. After clean-up and preconcentration, the concentration levels increased 10-fold for all amines except putrescine and cadaverine, which gave poor recovery by this method unlike the rest which gave recoveries of almost 90%. The overall process was successfully applied to identify and quantify biogenic amines in several red wines from the Tarragona region.     

Simultaneous conduction of two- and three-phase hollow-fiber-based liquid-phase microextraction for the determination of aromatic amines in environmental water samples

This paper describes a simultaneously performed two-/three-phase hollow-fiber-based liquid-phase microextraction (HF-LPME) method for the determination of aromatic amines with a wide range of pK_a (−4.25 to 4.6) and log K_OW (0.9–2.8) values in environmental water samples. Analytes including aniline, 4-nitroaniline, 2,4-dinitroaniline and dicloran were extracted from basic aqueous samples (donor phase, DP) into the microliter volume of organic membrane phase impregnated into the pores of the polypropylene hollow fiber wall, then back extracted into the acidified aqueous solution (acceptor phase, AP) filling in the lumen of the hollow fiber. The mass transfer of the analytes from the donor phase through the organic membrane phase into acceptor phase was driven by both the counter-coupled transport of hydrogen ions and the pH gradient. Afterwards, the hollow fiber was eluted with 50 μL methanol to capture the analytes from both the organic membrane and the acceptor phase. Factors relevant to the enrichment factors (EFs) were investigated. Under the optimized condition (DP: 100 mL of 0.1 M NaOH with 2 M Na₂SO₄; organic phase: di-n-hexyl with 8% trioctylphosphine oxide (TOPO); AP: 10 μL of 8 M HCl; extraction time of 80 min), the obtained EFs were 405–2000, dynamic linear ranges were 5–200 μg/L (R > 0.9976), and limits of detection were 0.5–1.5 μg/L. The presence of humic acid (0–25 mg/L dissolved organic carbon) had no significant effect on the extraction efficiency. The proposed procedure worked very well for real environmental water samples with microgram per liter level of analytes, and good spike recoveries (80–103%) were obtained.     

Determination of aromatic amines in environmental water samples using solid-phase extraction modified with sodium dodecyl sulphate and micellar liquid chromatography

Extraction and determination of seven aromatic amines in environmental water samples were performed with solid-phase extraction (SPE) and micellar liquid chromatography (MLC) using experimental design. Extraction of aromatic amines was carried out with a C₁₈ cartridge modified with sodium dodecyl sulphate (SDS). The washing solution and elution solvent for extraction of aromatic amines were aqueous solution containing 5% (v/v) acetonitrile and 5% (v/v) acetone and 3 mL methanol, respectively. The chemometrics approach was applied for the separation optimisation of these compounds using MLC. Different mobile phase compositions were used for modelling based on retention times to obtain the best separation using central composite design. The optimum mobile phase composition for separation and determination of analytes in water samples was 69 mM SDS, 9% v/v 1-propanol and pH = 6.4. Recoveries were between 84.8–93.5% with relative standard deviation (RSD) less than 5.8% (n = 5). Limits of detection and linear range were 1–4.5 and 3.1–125.0 µg/L, respectively. The proposed method was applied to determine the aromatic amines in real samples (river and well waters). Amount of 4-nitroaniline and 3-nitroaniline in river water sample were 2.15 and 1.91 µg/L, respectively.     

β-Cyclodextrin-polyurethane polymer as solid phase extraction material for the analysis of carcinogenic aromatic amines

β-Cyclodextrin-polyurethane (β-CDPU) polymer was synthesized by the reaction of β-cyclodextrin with hexamethylene diisocyanate in dry dimethylformamide and used as a sorbent for the solid phase extraction (SPE) of carcinogenic aromatic amines from water. The polymers were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry and particle size analysis. The separation and quantification was performed by Liquid chromatography with RP-C₁₈ column and diode array detection using standard arylamines for quantification. When compared with commercially available sorbents, β-CDPU gave better recovery for the aromatic amines. From the variation of pH of the extractant from 4.0 to 8.5 recovery was highest at pH 8.5. The breakthrough volume has been ascertained to be 100 ml for 200 mg of the resin. The new SPE material offers better recovery and estimation of banned arylamines.     

Ionic liquid based dispersive liquid-liquid microextraction of aromatic amines in water samples

In this work, a new microextraction method termed ionic liquid based dispersive liquid-liquid microextraction （IL-DLLME） was demonstrated for the extraction of 2-methylaniline, 4-chloroaniline, 1-naphthylamine and 4-aminobiphenyl in aqueous matrices. After extraction the ionic liquid （IL） phase was injected directly into the high performance liquid chromatography （HPLC） system for determination. Some parameters that might affect the extraction efficiency were optimized. Under the optimum conditions, good linear relationship, sensitivity and reproducibility were obtained. The limits of detection （LOD, S/N = 3） for the four analytes were in the range of 0.45-2.6 μg L^-1. The relative standard deviations （R.S.D., n = 6） were in the range of 6.2-9.8%. This method was applied for the analysis of the real water samples. The recoveries ranged from 93.4 to 106.4%. The main advantages of the method are high speed, high recovery, good repeatability and volatile organic solvent-free.     

Separation of aliphatic and aromatic amines by the ion interaction reagent RP-HPLC technique

Summary Ion interaction reagent RP-HPLC has been employed for the separation of some typical aliphatic and aromatic amines. The effects on retention of the alkyl chain length of the eluent, and of the eluent flow-rate have been studied. The use of solutions of hexylaminium-, octylaminium-and decylaminium-salicylate has been tested and compared, employing both conductometric and spectrophotometric detection. On the basis of the results obtained, the optimal experimental conditions can be chosen for each separation. Aliphatic and aromatic mono and diamines can be separated and detected, with an average sensitivity of the order of 40 ng without any pretreatment or derivatization. The retention data obtained for amines, compared with those obtained with the same ion interaction reagents for anions, help in the interpretation of the mechanism involved in the technique.     

Ultrasound-assisted ionic liquid dispersive liquid-phase micro-extraction: A novel approach for the sensitive determination of aromatic amines in water samples

Ultrasound-assisted ionic liquid dispersive liquid-phase micro-extraction was developed for the determination of four aromatic amines such as 2,4-dichloroaniline, 1-naphthylamine, 6-chloroanline and N,N-dimethylaniline. High-performance liquid chromatography coupled with UV detector was used for the determination of aromatic amines. In the novel procedure, 1-hexyl-3-methylimidazolium hexafluorophosphate [C₆MIM] [PF₆] was dispersed into the aqueous sample solution as fine droplets by ultrasonication, and which promoted the analytes more easily migrate into the ionic liquid phase. Variable affecting such as the volume of [C₆MIM] [PF₆], sample pH, ultrasonication time, extraction time, centrifuging time have been investigated in detail. The proposed method has been found to have excellent detection sensitivity with limits of detection (LOD, S/N = 3) in the range of 0.17–0.49 μg L⁻¹ and precisions in the range of 2.0–6.1% (RSDs, n = 6). This method has been also successfully applied to analyze the real water samples and good spiked recoveries over the range of 92.2–119.3% were obtained.     

Nanosized cation exchanger for the electrophoretic separation and preconcentration of catecholamines and amino acids

The first example of application of nanosized polystyrene-based cation exchanger (NSCE) with sulfo groups as a dynamic coating of capillary walls was demonstrated. The conditions of dynamic coating formation were optimized and ensured the long-term stability of the coating. Capillary-to-capillary and day-to-day repeatabilities were 4% and 3%, correspondingly. The NSCE coating stability at various pH and influence of pH on the EOF mobility were investigated. The developed NSCE-modified coated capillaries provided improved resolution (R_s = 0.9–3.2 for catecholamines and R_s = 1.7–2.8 for amino acids) and efficiencies (330–520 ×10³ t.p./m) of basic analytes, which are 1.5 times higher compared to untreated capillary. The optimized conditions were as follows: 50 mM phosphate buffer solution at pH 2.2 with 5 μM NSCE. The effect of the NSCE concentration in BGE on the electrophoretic mobilities of the analytes was investigated. The various online concentration techniques were tested in order to decrease the LODs. The simultaneous application of NSCE capillaries and field-amplified sample stacking provided the lowest LODs of catecholamines and amino acids and allowed to determine these analytes in human urine.     

Determination of aromatic sulfonates in coastal water by on-line Ion-pair solid-phase extraction/ion-pair liquid chromatography with UV detection

Summary A method for determining aromatic sulfonates in sea water is presented. Ion-pair solid phase extraction is coupled on-line to ion-pair liquid chromatography with UV detection. In the enrichment step, the recoveries from 100 mL of sea water were higher than 65% for most analytes. Linearity was good and detection limits were between 0.02 and 1 μgL⁻¹. The repeatability of the method, expressed as % of relative standard deviation (n=3) was between 1 and 15%. The method was checked in coastal water near the commercial port of Tarragona, where effluents from the petrochemical industry are discharged. All the samples taken were found to contain 2-naphthalenesulfonate.     

Liquid chromatographic determination of aliphatic amines in water using solid support assisted derivatization with 9-fluorenylmethyl chloroformate

Summary A simple and sensitive method has been developed for the liquid chromatographic determination of short-chain aliphatic amines in water. Analytes are retained in solid-phase extraction (SPE) cartridges, and then derivatized by drawing an aliquot of the fluorogeneic reagent 9-fluorenylmethyl chloroformate (FMOC) through the cartridges. After a certain reaction time the derivatives formed are desorbed with acetonitrile. The collected extracts are then chromatographed on a LiChrospher 100 RP₁₈ 125 mm×4 mm i.d., 5 μm, column using an acetonitrile-water gradient. The influence of experimental conditions (SPE material, volume of sample, concentration of FMOC, time of reaction and pH) has been investigated. Optimal results have been obtained with C₁₈ SPE cartridges using a sample volume of 5.0 mL. For derivatization, 0.25 mL aliquots of 25 mM FMOC have been used, the reaction time being only 2 min. The method has been applied to the quantification of several aliphatic amines: methylamine, ethylamine, dimethylamine,n-butylamine,n-pentylamine andn-hexylamine. Under the proposed conditions the percentages of analytes retained plus derivatized were of about 54–107% compared to those obtained with direct solution derivatization. The method provided good reproducibility, linearity and accuracy within the 0.050–1.0 mg L⁻¹ concentration range. The limits of detection were in the 0.25–5.0 μg L⁻¹ range. The utility of the described approach has been tested by analysing tap water, river water and industrial waste water.     

An improved analytical method for determination of heterocyclic amines in chicken legs

Summary Several extraction, separation and detection methods for heterocyclic amines (HAs) in chicken legs were evaluated by liquid chromatography. Results showed that the most appropriate extraction method includes the removal of macrosubstances by centrifugation and subsequent purification using a PRS (propylsulfonic acid silica gel) and a C₁₈ cartridge, and the recovery obtained ranged between 51 and 89 %. For HPLC separation, a binary solvent system consisting of acetonitrile and 0.05 M ammonium acetate solution (pH 3.6) with gradient elution with flow rate of 1.0 mL min⁻¹ and detection at 258 nm was used to resolve 16 HAs. With fluorescence nine HAs could be detected by employing a programmable wavelength, and the sensitivity was 100–400 times higher than that by UV detection. The detection limits for UV and fluorescence detection were 0.02≈0.5 ng and 0.05≈3 pg respectively, with a signal-to-noise ratio 3. The presence of HAs in fried chicken legs was also determined.     

Determination of aromatic amines in environmental water sample by hollow fiber-liquid phase microextraction and microemulsion electrokinetic chromatography

A novel method of microemulsion electrokinetic chromatography (MEEKC) coupled with hollow fiber-liquid phase microextraction (HF-LPME) was developed for determination of six aromatic amines including 4-methylaniline, 3-nitroaniline, 2,4-dimethylaniline, 4-chloroaniline, 3,4-dichloraniline and 4-aminobiphenyl. Baseline separation of six aromatic amines was achieved within 8 min by using the microemulsion buffer containing a 10 mM borate buffer at pH 9.0, 0.8% (v/v) ethyl acetate as oil droplets, 60 mM sodium cholate as surfactant, 5.0% (v/v) 1-butanol as co-surfactant. The influence factors relevant to the HF-LPME process were systemically investigated. The obtained enrichment factors were ranged between 70 and 157 in a 30 min extraction time, and the limits of detection ranged between 0.0021 and 0.0048 μg/mL. This purposed method was successfully applied for the analysis of aromatic amines in water sample and the recoveries were ranged from 87.2% to 99.8%.     

Derivatization of aromatic amines with bromine for improved gas chromatographic determination

Summary For improved determination of aromatic amines by gas chromatography and detection with an electron capture detector (GC-ECD) a derivatization method based on the bromination of the aromatic ring in an acetic acid medium was developed. In general, all free ortho and para-positions relative to the amino group undergo electrophilic substitution. Separation of at least 30 compounds in a single chromatographic run in 30 min is possible. With this method, 56 aromatic amines were studied and only in 6 cases were no derivatives obtained. Quantitation limits determined from calibration data are 1.2–40 μg L⁻¹ for a 100 mL sample and an injection volume of 1 μL. Previous experiments suggest that both sample and injection volume may be increased to lower the quantitation limit.     

Dispersive liquid phase micro-extraction of aromatic amines in environmental water samples

A new, rapid and sensitive method for the determination of aromatic amines such as o-nitroaniline (NIT), alpha-naphtylamine (NAP), o-chloroaniline (CHL) in environmental water samples was developed with dispersive liquid phase micro-extraction coupled with high performance liquid chromatography. Preliminary experiments indicated that excellent achievements were obtained when chlorobenzene and acetonitrile were employed as the extraction solvent and dispersive solvent, respectively. Some other parameters that would have important effect on the pre-concentration of aromatic amines were investigated in detail. Under the optimal conditions, the method had excellent linear relationship between the peak area and the concentration for NIT, NAP and CHL in the concentration range of 1?～?50?µg?L^?1. The limits of detection and precisions of the proposed method were in the range of 0.1?～?0.7?µg?L^?1 and 6.3?～?9.7%, respectively. The proposed method has been validated with two real water samples, and the results showed that excellent spiked recoveries in the range of 92.8%?～?111.5% were achieved. All these demonstrated that the proposed method would be very useful and applicable for the determination of such pollutants in the future.     

Supercritical fluid extraction-high performance liquid chromatography on-line coupling: Extraction of some model aromatic compounds

Summary An SFE-HPLC system has been tested with a simple model aromatic mixture on spiked silica. The spiked silica was extracted with pure CO₂ and the extract retained in a trap packed with C18 material. Quantitative separation and reproducity have been investigated and are reported.     

Supercritical fluid extraction-high performance liquid chromatography on-line coupling: Extraction of some model aromatic compounds

Summary An SFE-HPLC system has been tested with a simple model aromatic mixture on spiked silica. The spiked silica was extracted with pure CO₂ and the extract retained in a trap packed with C18 material. Quantitative separation and reproducity have been investigated and are reported.     

Determination of aromatic amines from textiles using dispersive liquid–liquid microextraction

A dispersive liquid–liquid microextraction procedure coupled with GC‐MS is described for preconcentration and determination of banned aromatic amines from textile samples. Experimental conditions affecting the microextraction procedure were optimized. A mixture of 30 μL chlorobenzene (extraction solvent) and 800 μL ACN (disperser solvent), 5 min extraction time, and 5 mL aqueous sample volume were chosen for the best extraction efficiency by the proposed procedure. Satisfactory linearity (with correlation coefficients >0.9962) and repeatability (<9.78%) were obtained for all 20 aromatic amines; detection limits attained were much lower than the standardized liquid–liquid method. The proposed method has advantages of being quicker and easier to operate, and lower consumption of organic solvent.