Thermal and rheological behavior of diesel and methanol biodiesel blends

The most feasible alternative among fuels derived from biomass seems to be the biodiesel, having the required characteristics for a total or partial substitution of diesel oil. Therefore, the aim of this work is to evaluate the thermal and rheological behavior of the blends of diesel with the methanol biodiesel obtained from soybean oil, using B5, B15 and B25 blends. All thermogravimetric curves exhibited one overlapping mass loss step in the 35–280°C temperature range at air atmosphere and one step between 37–265°C in nitrogen. The rheological study showed a Newtonian behavior (n=1) for all blends.     

胶原-壳聚糖共混膜的微观结构

胶原-壳聚糖共混膜的微观结构;胶原;壳聚糖;共混膜;原子力显微镜(AFM)     

Thermal and rheological properties of miscible polyethersulfone/polyimide blends

Blends of an aromatic polyethersulfone (commercial name Victrex) and a polyimide (commercial name Matrimid 5218), the condensation product of 3,3′,4,4′-benzophenone tetracarboxylic dianhydride and 5(6)-amino-1-(4′-aminophenyl)-1,3,3′-trimethylindane, were studied by differential scanning calorimetry, dynamic mechanical analysis, and rheological techniques. The blends appeared to be miscible over the whole range of compositions when cast as films or precipitated from solution in a number of solvents. After annealing above the apparent phase boundary, located above T_g, the blends were irreversibly phase separated indicating that the observed phase boundary does not represent a true state of equilibrium. Only a narrow “processing window” was found for blends containing up to 20 wt % polyimide. Rheological measurements in this range of compositions indicated that blending polyethersulfone with polyimide increases the complex viscosity and the elastic modulus of the blends. For blends containing more than 10 wt % polyimide, abrupt changes in the rheological properties were observed at temperatures above the phase boundary. These changes may be consistent with the formation of a network structure (due to phase separation and/or crosslinking). Blends containing less than 10 wt % polyimide exhibited stable rheological properties after heating at 320°C for 20 min, indicating the existence of thermodynamic equilibrium.     

Thermorheological analysis of PVC blends

The effect of temperature on dynamic viscoelastic measurements of miscible poly (vinyl chloride) (PVC)/ethylene‐vinyl acetate–carbon monoxide terpolymer (EVA‐CO) and immiscible PVC/high‐density polyethylene (HDPE) and PVC/chlorinated polyethylene (CPE) molten blends is discussed. PVC plasticized with di(2 ethyl hexyl) phthalate (PVC/DOP) and CaCO₃ filled HDPE (HDPE/CaCO₃) are also considered for comparison purposes. Thermorheological complexity is analyzed using two time–temperature superposition methods: double logarithmic plots of storage modulus, G′, vs. loss modulus, G″, and loss tangent, tan δ, vs. complex modulus, G*, plots. Both methods reveal that miscible PVC/EVA‐CO and PVC/DOP systems are thermorheologically complex, which is explained by the capacity of PVC to form microdomains or crystallites during mixing and following cooling of the blends. For immiscible PVC/HDPE and PVC/CPE blends the results of log G′ vs. log G″ show temperature independence. However, when tan δ vs. log G* plots are used, the immiscible blends are shown to be thermorheologically complex, indicating that the morphology observed by microscopy and constitued by a PVC phase dispersed in a HDPE or CPE matrix, is reflected by this rheological technique. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 469–477, 2000     

Rheology of concentrated blends with immiscible components

The rheology and morphology evolution of nondilute and concentrated immiscible blends were investigated in this paper. A theoretical model was established by a Hamiltonian formalism. The interactions between droplets were integrated in the morphology‐dependent drag coefficient. The phenomenological parameters in the model were determined by the comparisons with the dilute emulsion model and the Krieger–Dougherty model. The model showed better predictions in the shear viscosity and first normal stress difference than that of the dilute emulsion model. The effects of volume fraction on droplet deformation were also predicted and compared with the numerical simulations. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2534–2540, 2005     

Thermal behaviour of polyetherimide peek blends

PEEK is characterised by high impact and fatigue resistance andT _g of 145C. Blends of PEEK and PEI have been made and scanning electron micro-graphs of the broken specimen show that the two polymers are completely miscible in all proportions. The study also shows that PEEKPEI 5050 blend, can be used as matrix for composite applications with appreciable enhancement ofT _g to 177C.     

Chitin and Chitosan Fibers

Chitin and chitosan are natural polymers extracted from various plants and animals. In recent years, these two polymers have attracted much interest because of their biodegradability, biocompatibility, wound-healing acceleration and many other unique properties. As a natural renewable resource, they offer many potential applications in a number of diversified fields. Chitin and chitosan fibers have been found useful as a biomaterial for potential applications such as sutures and wound dressings. This article presents a brief introduction to the properties of chitin and chitosan, and reviews the various attempts for the production of fibers from the two polymers. © 1997 John Wiley & Sons, Ltd.     

The Infuence of Salicin on Rheological and Film-Forming Properties of Collagen

Collagen films are widely used as adhesives in medicine and cosmetology. However, its properties require modification. In this work, the influence of salicin on the properties of collagen solution and films was studied. Collagen was extracted from silver carp skin. The rheological properties of collagen solutions with and without salicin were characterized by steady shear tests. Thin collagen films were prepared by solvent evaporation. The structure of films was researched using infrared spectroscopy. The surface properties of films were investigated using Atomic Force Microscopy (AFM). Mechanical properties were measured as well. It was found that the addition of salicin modified the roughness of collagen films and their mechanical and rheological properties. The above-mentioned parameters are very important in potential applications of collagen films containing salicin.     

Rheological properties of UHMWPE/iPP blends

The effects of isotactic polypropylene (PP) on the rheological properties of ultra high molecular weight polyethylene (UHMWPE) have been measured in a broad range of composition (0, 5, 15, 30 wt% PP) at various temperatures (110, 130, and 150°C) and a specific gel concentration of 6 wt%. The result showed that the viscosity of the UHMWPE significantly decreased with the addition and increasing amount of PP. Regardless of temperature, the viscosity function followed the power‐law behavior. Copyright © 2009 John Wiley & Sons, Ltd.     

Collagen Type II—Chitosan Interactions as Dependent on Hydroxylation and Acetylation Inferred from Molecular Dynamics Simulations

Chitosan–collagen blends have been widely applied in tissue engineering, joints diseases treatment, and many other biomedical fields. Understanding the affinity between chitosan and collagen type II is particularly relevant in the context of mechanical properties modulation, which is closely associated with designing biomaterials suitable for cartilage and synovial fluid regeneration. However, many structural features influence chitosan’s affinity for collagen. One of the most important ones is the deacetylation degree (DD) in chitosan and the hydroxylation degree (HD) of proline (PRO) moieties in collagen. In this paper, combinations of both factors were analyzed using a very efficient molecular dynamics approach. It was found that DD and HD modifications significantly affect the structural features of the complex related to considered types of interactions, namely hydrogen bonds, hydrophobic, and ionic contacts. In the case of hydrogen bonds both direct and indirect (water bridges) contacts were examined. In case of the most collagen analogues, a very good correlation between binding free energy and DD was observed.     

新型羧甲基壳聚糖水凝胶流变性能,药物释放及细胞相容性研究

羧甲基壳聚糖含有丰富的羧基和氨基, 通过1-乙基-(3-二甲基氨基丙基)碳二亚胺盐酸盐(EDC)和N-羟基琥珀酰亚胺(NHS)共催化交联羧甲基壳聚糖形成新型水凝胶. 调节EDC/NHS用量, 制备不同交联度的羧甲基壳聚糖水凝胶(CMCS hydrogels). 研究水凝胶的流变行为, 结果表明, 高交联度的水凝胶具有较好的弹性形变能力, 较高的储存模量, 这是因为随着交联度的升高, 羧甲基壳聚糖水凝胶化学交联网络结构趋于完善. 以胸腺五肽(TP-5)为模型药物, 初步评价CMCS水凝胶药物释放行为, 结果表明水凝胶交联度越高, 胸腺五肽释放速度越慢. MTT法初步评价了水凝胶细胞毒性, 细胞形态和细胞相对增值速率, 结果表明水凝胶毒性很低. 由此可见, 水凝胶具有良好的生物相容性, 在药物缓释和组织工程领域具有广阔的应用前景.     

Rheological Study on Polypropylene/Cycloolefin Copolymer Blends

Summary: Polypropylene, cycloolefin copolymer and their blends were characterized by means of melt flow analysis and capillary rheometry at temperatures between 190 and 230 °C in order to shed more light on COC fiber formation obtained in injection molding process. Melt viscosity and its activation energy as functions of blend composition show negative deviation from the expected additivity (Negative Deviating Blends). The COC/PP viscosity ratio increases with shear rate, but decreases with temperature. High temperature, low viscosity ratio and high shear rate seem to be favorable for fiber formation. Glass transition (from the reversible heat flow curve of modulated DSC) of dumbbell specimens produced by injection molding at 230 °C with COC minor component was 2–4 °C higher than that of grinded pellets obtained from mixing at 190 °C.     

Rheological properties of immiscible polymer blends under parallel superposition shear flow

The small amplitude oscillations can be superimposed parallelly on steady shear flows. The resulting moduli provide information about time‐ and shear‐dependent microstructure. For this purpose, model blends composed of polydimethylsiloxane and polyisobutylene with the viscosity ratio of 7.9 and 0.25 are investigated. The resulting moduli are compared with the results derived from numerical calculation as well as analytical solutions, developed here by introducing the conditions under parallel superposition flow field into MM model. Good agreement is found in the interfacial contribution of the storage moduli for blend with low volume fraction. Moreover, detailed analysis on hydrodynamic interaction between droplets is given to explain the discrepancies. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 431–440, 2008     

Rheological properties for polypropylene modified by polytetrafluoroethylene

Linear and nonlinear viscoelastic properties for binary blends composed of isotactic polypropylene and polytetrafluoroethylene (PTFE) are studied. It is found that blending a small amount of PTFE greatly enhances the storage modulus in the low frequency region. Further, drawdown force and normal stress difference increase with the PTFE content. Electron microscope observation reveals that PTFE deforms into fine fibers whose diameter is smaller than 0.5 μm. The network structure composed of the fibers is responsible for the marked elastic properties. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 2008–2014, 2009     

Crystallinity and rheology of HDPE/PA12 blends compatibilized with HDPE-alt-MAH

This work studies the crystallinity and rheology of HDPE/PA12 blends compatibilized with 2 wt% of HDPE-alt-MAH. Specimens of HDPE/PA12 blends were extruded and injected into a mold with 75/25, 50/50, and 25/75 HDPE/PA ratios. The Fourier-transform infrared spectroscopy (FTIR) analysis showed that no oxidation reaction occurred in the high-temperature processing and that stronger interactions between the components of the blends occurred in the polyamide's functional groups. The x-ray diffraction (XRD) analysis showed that the crystallinity degree of the blends and the mean crystallite sizes decreased with the addition of PA12 for both blends. The HDPE's lattice parameters were consistent with the values in the literature, whereas for the PA12, it was not possible to fit its lattice parameters. The rheology analysis evaluated the relationship between the shear stress and viscosity and found that the HDPE/PA 75/25 blend was the most pseudoplastic, presenting the best processability under high shear rates.     

Solution Properties of Partially Hydrolysed Polyacrylamide and Chitosan Mixed Solutions

Summary: In this paper, the properties of a partially hydrolysed polyacrylamide with a low charge density and chitosan mixtures were evaluated in an aqueous acid solution. The formation of a soluble complex was followed by conductometry and potentiometry, and the stoichiometry at the titration endpoint was investigated as a function of the polyanion added. The influence of salts on the titration endpoint and on the rheological behavior of the mixed solutions was also studied. The mixture of equal concentration of both polymers, in the absence of salt, presented synergy, with a significant viscosity increase. Nevertheless, in the presence of salts, this mixture presented minimum viscosity. These results were discussed as a function of the polymers structural features and the environment used in the study.     

Morphological development and rheological changes of phenoxy/SAN blends during in‐situ polymerization

This article reports the results of an investigation into the time‐dependent morphological and rheological changes that accompany the in‐situ polymerization of blends composed of poly(hydroxyether of bisphenol A) (phenoxy) and poly(styrene‐co‐acrylonitrile) (SAN). The rheological behavior was monitored continuously during the in‐situ polymerization, whereas the miscibility and phase structure of blends formed in situ were examined at discrete stages of polymerization by differential scanning calorimetry and transmission electron microscopy. In the blend with 30 wt % SAN, a co‐continuous blend morphology was associated with gradual changes in the dynamic moduli, suggesting that phase separation proceeded by spinodal decomposition (SD). In contrast, phenoxy‐rich dispersions were uniformly dispersed in a continuous SAN‐rich matrix in the blend with 50 wt % SAN, and the corresponding rheological signature revealed a sharp initial increase in the dynamic moduli, followed by slower growth after long times, indicative of phase separation via nucleation and growth (NG). The rheological property changes are closely related to morphology development and mechanisms of phase separation induced duringin‐situ polymerization. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2614–2619, 2007     

长链支化聚丙烯的非线性流变行为

通过大幅振荡剪切试验方法, 研究了长链支化聚丙烯的非线性流变学行为, 揭示了长链支化结构与非线性黏弹响应的关系. 利用傅里叶变换流变学方法得到试样的三次倍频相对振幅I_3/1与应变的标度关系, 用于界定线性聚丙烯和长链支化聚丙烯非线性流变行为的差异, 并定义了非线性系数来量度长链支化程度. 在高应变下, I_3/1与应变的变化关系可以进一步描述长链支化在非线性流场下的特性, 并得到了长链支化程度与其非线性响应之间的变化关系. 通过应力波的Lissajous曲线分解, 发现了环内和环间黏弹性的差异, 长链支化结构在大应变流场下的非线性黏弹性响应弱于线性结构, 支化程度越高非线性响应越弱.     

Thermal behaviour of bisitaconimide and reactive diluent blends

Thermal behaviour of blends based on N,N'-bis(4-itaconimidophenyl) ether (IE) and 4,4'-bis(4-allyl-2-methoxyphenoxy) benzophenone (R₁) or 4,4'-bis(2-allylphenoxy) benzophenone (R₂) are described in this paper. The reactive diluent content was varied from 5-50% (mass/mass) in these blends. A decrease in the melting point and exothermic peak temperature was observed with increasing mass percent of reactive diluent. Thermal stability of blends was affected at high mass percentage of reactive diluents. This revised version was published online in August 2006 with corrections to the Cover Date.