Ionic transport, thermal, XRD, and phase morphological studies on LiCF3SO3-based PVC–PVdF gel electrolytes

The plasticized polymer electrolyte composed of polyvinylchloride (PVC) and polyvinylidene fluoride (PVdF) as host polymer, the mixture of ethylene carbonate and propylene carbonate as plasticizer, and LiCF₃SO₃ as a salt was studied. The effect of the PVC-to-PVdF blend ratio with the fixed plasticizer and salt content on the ionic conduction was investigated. The electrolyte films reveal a phase-separated morphology due to immiscibility of the PVC with plasticizer. Among the three blend ratios studied, 3:7 PVC–PVdF blend ratio has shown enhanced ionic conductivity of 1.47 × 10⁻⁵ S cm⁻¹ at ambient temperature, i.e., the ionic conductivity decreased with increasing PVC-to-PVdF ratio and increased with increasing temperature. A temperature dependency on ionic conductivity obeys the Arrhenius behavior. The melting endotherms corresponding to vinylidene (VdF) crystalline phases are observed in thermal analysis. Thermal study reveals the different levels of uptake of plasticizer by VdF crystallites. The decrease in amorphousity with increase in PVC in X-ray diffraction studies and larger pore size appearance for higher content of PVC in scanning electron microscopy images support the ionic conductivity variations with increase in blend ratios.     

Effect of lithium salt concentration in PVAc/PMMA-based gel polymer electrolytes

Hybrid solid polymer electrolyte films comprising of poly(vinyl acetate) (PVAc), poly(methyl methacrylate) (PMMA), LiClO₄, and propylene carbonate are prepared by solution casting technique by varying the salt concentration. In this study, PVAc/PMMA polymer blend ratio is fixed as 25:75 on the basis of conductivity and mechanical stability of the film. X-ray diffraction, Fourier transform infrared impedance, thermogravimetry/differential thermal analysis and scanning electron microscopy studies are carried out for the polymer electrolytes. The maximum ionic conductivity is found to be 4.511 × 10⁻⁴ S cm⁻¹ at 303 K for the plasticized polymer electrolyte with 8 wt.% of LiClO₄. The ionic conductivity is found to decrease with an increase of LiClO₄ concentration.     

A study on the blending effect of polyvinyledene fluoride in the ionic transport mechanism of plasticized polyvinyl chloride + lithium perchlorate gel polymer electrolytes

The gel polymer electrolytes composed of the blend of polyvinylchloride (PVC) and polyvinylidene fluoride (PVdF) as host polymers, the mixture of ethylene carbonate (EC) and propylene carbonate (PC) as a plasticizer, and LiClO₄ as a salt was studied. An attempt was made to investigate the effect of PVdF in the plasticized PVC + LiClO₄ system in three blend ratios. The differential scanning calorimetry study confirms the formation of polymer–salt complex and miscibility of the PVC and PVdF. The X-ray diffraction results of plasticized PVC (S1, S2, S3) and PVdF-blended films (S4, S5, S6) were compared, in that an increase in PVC concentration decreases the degree of crystallinity for S1 and S3, respectively, but drastically increases for PVC (S2). The increase in PVC content has not accounted in the conductivity studies also noted. However, the blending effect of PVdF showed decreases in crystallinity homogeneously for (S6 > S5 > S4), which were reflected in ionic conductivity measurements. The surface morphology of the films were also studied by scanning electron microscope, and it corroborates the same. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006.     

Rheological properties and impedance spectroscopy of PMMA-PVdF blend and PMMA gel polymer electrolytes for advanced lithium batteries

In the present study, blend ionic conducting membranes formed by poly(methylmethacrylate (PMMA) / poly(vinilydenefluoride) (PVDF) (blend ratio PMMA/PVdF=80/20), lithium perchlorate (LiClO₄) as a salt and a mixture of ethylene carbonate (EC)-propylene carbonate (PC) as plasticizer are prepared and characterized by impedance spectroscopy and dynamic rheological experiments. We compared the results obtained on the blends with those on PMMA gel-based polymer electrolytes incorporating the same EC/PC mixture of plasticizer and the same quantities of salt. The main focus of this study is to illustrate the rheological data of the gels and blends electrolytes to point up their mechanical stability with the temperature in sight of the technological application. The conductivity values are reported in the 20–100 °C temperature range for different lithium salt contents, while the rheological behaviour has been recorded up to 140 °C. Paper presented at the Patras Conference on Solid State Ionics — Transport Properties, Patras, Greece, Sept. 14 – 18, 2004.     

Development and characterizations of PVdF-PEMA gel polymer electrolytes

A new class of gel polymer electrolytes comprising the blend of poly(ethyl methacrylate) (PEMA) and poly(vinylidene fluoride), the mixture of ethylene carbonate and propylene carbonate as a plasticizer, and lithium perchlorate (LiClO₄) as a salt was prepared using solvent casting technique. The formation of polymer–salt complexes has been confirmed by XRD analysis. Morphological and thermal studies have been performed using SEM and DMA analyses. A comparative look between PEMA and poly(methyl methacrylate) (PMMA) electrolytes has showed that PEMA electrolytes exhibited better electrochemical performances than PMMA electrolytes, despites its lower conductivity.     

Electrical,structural, and morphological studies of honeycomb-like microporous zinc-ion conducting poly (vinyl chloride)/poly (ethyl methacrylate) blend-based polymer electrolytes

Solid polymer electrolytes (SPEs) based on poly (vinyl chloride)/poly (ethyl methacrylate) [PVC/PEMA] blend complexed with zinc triflate [Zn(CF₃SO₃)₂] salt have been prepared using solution casting technique. Thin film samples containing various blend ratios of PVC/PEMA with fixed composition of salt have been examined by means of complex impedance analysis, and as a consequence, the typical composition corresponding to PVC (30 wt%)/PEMA (70 wt%) has been identified as the optimized blend exhibiting the highest room temperature ionic conductivity of 10^?8 Scm^?1. The ionic conductivity of the optimized blend was further enhanced from 10^?8 to 10^?6 Scm^?1 by adding the chosen salt in different weight percentages at 301 K. The occurrence of complexation of the polymer blend and an evidence of interaction of cations, namely Zn²⁺ ions with the polymer blend, have been confirmed by Attenuated total reflectance-Fourier transformed infrared (ATR-FTIR) spectroscopy measurement studies. The efficacy of ion-polymer interactions was estimated by means of an evaluation of transport number data pertaining to Zn²⁺ ions which was found to be 0.56. The apparent changes resulting in the structural properties of these polymer electrolytes possessing a honeycomb-like microporous structure were identified using X-ray diffraction (XRD) and scanning electron microscopic (SEM) studies. Such promising features of the present polymer blend electrolyte system appear to suggest possible fabrication of new rechargeable zinc batteries involving improved device characteristics.     

Experimental investigations on plasticized PMMA/PVA polymer blend electrolytes

Blend based polymer electrolytes composed of poly (methyl methacrylate) (PMMA), poly(vinylalcohol) (PVA) and LiClO₄ are prepared using solvent casting technique. The polymer films are characterized by XRD and FTIR studies to determine the molecular environment for the conducting ions. These polymer films have been investigated in terms of ionic conductivity using the results of impedance studies. The influence of the blend composition on the electrochemical behaviour is also discussed. The highest room temperature conductivity obtained for the film consisting of PMMA, PVA, LiClO₄ and DMP is 0.06×10⁻³ S/cm at 303 K. The PMMA-PVA blend based polymer electrolytes look very desirable and promising for lithium battery applications.     

Investigation of ionic conduction and mechanical properties of PMMA–PVdF blend-based polymer electrolytes

Polymeric gel electrolytes, based on a blend of poly(methylmethacrylate)/poly(vinylidene fluoride) (PMMA/PVdF), ethylene carbonate/propylene carbonate (EC/PC) as plasticizer and lithium perchlorate as electrolyte, have been studied as a function of the different polymeric ratios to obtain the best compromise between ionic conduction and mechanical properties of the systems involved. Ionic conductivity and the lithium self-diffusion coefficient were measured by the PFG–NMR method, which revealed a maximum of lithium mobility for the composition PMMA 60%–PVdF 40%. The Raman spectroscopic study revealed a change of the interaction between that of the lithium cations and the plasticizer molecules for different PMMA / PVdF ratios. Oscillatory rheological tests have shown better mechanical properties for the intermediate compositions of the blend.     

Structural, conductivity, and dielectric characterization of PEO–PEG blend composite polymer electrolyte dispersed with TiO2 nanoparticles

A solid polymer electrolyte (SPE) composites consisting blend of poly(ethylene oxide) (PEO) and poly(ethylene glycol) (PEG) as the polymer host with LiCF₃SO₃ as a Li⁺ cation salt and TiO₂ nanoparticle which acts as a filler were prepared using solution-casting technique. The SPE films were characterized by X-ray diffraction and Fourier transform infrared analysis to ensure complexation of the polymer composites. Frequency-dependent impedance spectroscopy observation was used to determine ionic conductivity and dielectric parameters. Ionic conductivity was found to vary with increasing salt and filler particle concentrations in the polymer blend complexes. The optimum ambient temperature conductivity achieved was 2.66?×?10^?4?S?cm^?1 for PEO (65 %), PEG (15 %), LiCF₃SO₃ (15 %), ethylene carbonate (5 %), and TiO₂ (3 %) using weight percentage. The dielectric relaxation time obtained from a loss tangent plot is fairly consistent with the conductivity studies. Both Arrhenius and VTF behaviors of all the composites confirm that the conductivity mechanism of the solid polymer electrolyte is thermally activated.     

Characterization of blend polymer PVA-PVP complexed with ammonium thiocyanate

Thin films of blend polymer electrolytes comprising poly(vinyl alcohol) (PVA) and poly(vinyl pyrrolidone) (PVP) complexed with ammonium thiocyanate (NH₄SCN) salt in different compositions have been prepared by solution casting technique using distilled water as solvent. The prepared films have been investigated by different experimental techniques. The complexation of these films has been studied by FTIR spectroscopy. The increase in amorphousness of the films with increase in NH₄SCN content has been confirmed by XRD analysis. The addition of ammonium thiocyanate salt to PVA-PVP polymer blend shows a shift in T_g of the blend. The effect of salt concentration and temperature on the ionic conductivity of the polymer blend films has been analyzed using AC impedance spectroscopy. The maximum conductivity of 6.85 × 10^?4 S cm^?1 at room temperature has been observed for the blend with 50 mol% PVA-50 mol% PVP complexed with 40 mol% NH₄SCN. The activation energy has been found to be minimum (0.24 eV) for this sample. Wagner’s polarization technique shows that the charge transport in these blend films is predominantly due to ions. Using the highest conductivity blend polymer electrolyte, a proton battery has been fabricated and its discharge characteristics have been studied.     

Infrared and conductivity studies on blends of PMMA/PEO based polymer electrolytes

Poly(methylmetacrylate)/poly(ethylene oxide) (PMMA/PEO) based polymer electrolytes were synthesized using the solution cast technique. Four systems of PMMA/PEO blends based polymer electrolytes films were investigated:

1. PMMA/PEO system,
2. PMMA/PEO + ethylene carbonate (EC) system,
3. PMMA/PEO + lithium hexafluorophosphate (LiPF₆) system and
4. PMMA/PEO + EC + LiPF₆ system.

The polymer electrolytes films were characterized by Impedance Spectroscopy and Fourier Transform Infrared Spectroscopy (FTIR). The FTIR spectra show the complexation occurring between the polymers, plasticizer and lithium salt. The FTIR results give further insight in the conductivity enhancement of PMMA/PEO blends based polymer electrolytes.     

An investigation of PVdF/PVC-based blend electrolytes with EC/PC as plasticizers in lithium battery applications

Solid polymer electrolytes (SPEs) composed of poly(vinylidene fluoride) (PVdF)-poly(vinyl chloride) (PVC) complexed with lithium perchlorate (LiClO₄) as salt and ethylene carbonate (EC)/propylene carbonate (PC) as plasticizers were prepared using solvent-casting technique, with different weight ratios of EC and PC. The amorphicity and complexation behavior of the polymer electrolytes were confirmed using X-ray diffraction (XRD) and FTIR studies. TG/DTA and scanning electron microscope (SEM) studies explained the thermal stability and surface morphology of electrolytes, respectively. The prepared thin films were subjected to AC impedance measurements as a function of temperature ranging from 302 to 373 K. The temperature-dependence conductivity of polymer films seems to obey VTF relation.     

Characterization of high ionic conducting PVAc–PMMA blend-based polymer electrolyte for electrochemical applications

A solid polymer blend electrolyte is prepared using poly(vinyl acetate) (PVAc) and poly(methyl methacrylate) (PMMA) polymers with different molecular weight percentage (wt%) of ammonium thiocyanate (NH₄SCN) by solution casting technique with tetrahydrofuran (THF) as a solvent. The structural, morphological, vibrational, thermal and electrical properties of the prepared polymer blend electrolytes have been studied. The incorporation of NH₄SCN into the polymeric matrix causes decrease in the degree of crystallinity of the samples. The complex formation between the polymer and salt has been confirmed by FTIR technique. The increase in T _g with increase in salt concentration has been investigated. The maximum conductivity of 3.684?×?10^?3 S cm^?1 has been observed for the composition of 70PVAc/30PMMA/30 wt% of NH₄SCN at 303 K. This value of ionic conductivity is five orders of magnitude greater than that of 70PVAc/30PMMA polymer membrane. Dielectric and transport studies have been done. The highest conducting polymer electrolyte is used to fabricate proton battery with the configuration Zn/ZnSO₄·7H₂O (anode) ||polymer electrolyte||PbO₂/V₂O₅ (cathode). The open circuit voltage of the fabricated battery is 1.83 V, and its performance has been studied.     

Electrical,optical, and structural characterization of polymer blend (PVC/PMMA) electrolyte films

Ion-conducting solid polymer blend electrolytes based on polyvinyl chloride (PVC)/poly methyl methacrylate (PMMA) complexed with sodium perchlorate (NaClO₄) were prepared in various concentrations by solution cast technique. The features of complexation of the electrolytes were studied by X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. DC conductivity of the films was measured in the temperature range 303–398 K. Transference number measurements were carried out to investigate the nature of charge transport in the polymer blend electrolyte system. The electrical conductivity increased with increasing dopant concentration, which is attributed to the formation of charge transfer complexes. The polymer complexes exhibited Arrhenius type dependence of conductivity with temperature. In the temperature range studied, two regions with different activation energies were observed. Transference number data showed that the charge transport in this system is predominantly due to ions. Optical properties like absorption edge, direct band gap, and indirect band gap were estimated for pure and doped films from their optical absorption spectra in the wavelength region 200–600 nm. It was found that the energy gap and band edge values shifted to lower energies on doping with NaClO₄ salt. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamil Nadu, India, Dec. 7–9, 2006.     

Preparation and characterization of the polymer electrolyte system ENR50/PVC/EC/PC/LiN(CF<Subscript>3</Subscript>SO<Subscript>2</Subscript>)<Subscript>2</Subscript> for electrochemical device applications

Polymer electrolytes containing epoxidised natural rubber (ENR50)/poly(vinyl chloride) (PVC) blend as a polymer host, a solvent mixture of ethylene carbonate (EC) and propylene carbonate (PC) as a plasticizer, and lithium imide, LiN (CF₃SO₂)₂, as a salt were studied. Polymer electrolytes that were obtained by solvent cast yielded solid dry rubbery films with a thickness range of 110–125 μm. Impedance spectroscopy, Fourier transform infra red (FTIR) spectroscopy, differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) were performed on these samples. The prepared solid polymer electrolytes exhibit ionic conductivities in the order 10⁻⁴ S cm⁻¹ at room temperature as expected. However, the physical properties of the electrolytes have improved significantly when optimal composition has been selected. Paper presented at the International Conference on Solid State Science and Technology 2006, Kuala Terengganu, Malaysia, Sept. 4–6, 2006.     

Solid electrolyte membranes from semi-interpenetrating polymer networks of PEG-grafted polymethacrylates and poly(methyl methacrylate)

Solid polymer electrolyte membranes were prepared as semi-interpenetrating networks by photo-induced polymerization of mixtures of poly(ethylene glycol) (PEG) methacrylate macromonomers in the presence of poly(methyl methacrylate) (PMMA) and lithium bis(trifluoromethanesulfonyl)imide salt. The composition of the membranes was varied with respect to the PMMA content, the degree of cross-linking, and the salt concentration. Infrared analysis of the membranes indicated that the lithium ions were coordinated by the PEG side chains. Calorimetry results showed a single glass transition for the blend membranes. However, dynamic mechanical measurements, as well as a closer analysis of the calorimetry data, revealed that the blends were heterogeneous systems. The ionic conductivity of the membranes increased with the content of PEG-grafted polymethacrylate, and was found to exceed 10^− 5 S cm^− 1 at 30 °C for membranes containing more than 85 wt.% of this component in the polymer blend.     

Poly (ethylene oxide) (PEO)-based,sodium ion-conducting‚ solid polymer electrolyte films,dispersed with Al<Subscript>2</Subscript>O<Subscript>3</Subscript> filler,for applications in sodium ion cells

The studies on solid polymer electrolyte (SPE) films with high ionic conductivity suitable for the realization of all solid-state Na-ion cells? form the focal theme of the work presented in this paper. The SPE films are obtained by the solution casting technique using the blend solution of poly (ethylene oxide) (PEO) with ethylene carbonate (EC) and propylene carbonate (PC) and complexed with sodium nitrate. Structural and thermal studies of SPE films are done by XRD, FTIR spectroscopy, and TGA techniques. Surface morphology of the films is studied using the FESEM. The ionic conductivity of SPE films is determined from the electrochemical impedance spectroscopy studies. For the SPE film with 16 wt% of NaNO₃ used for reacting with the polymer blend of PEO with EC and PC, the ionic conductivity obtained is around 1.08 × 10^?5 S cm^?1. Addition of the Al₂O₃ as the filler material is found to enhance the ionic conductivity of the SPE films. The studies on the Al₂O₃ modified SPE film show an ionic conductivity of 1.86 × 10^–4 S cm^?1, which is one order higher than that of the SPE films without the filler content. For the SPE film dispersed with 8 wt% of Al₂O₃, the total ion transport number observed is around 0.9895, which is quite impressive from the perspective of the applications in electrochemical energy storage devices. From the cyclic voltammetry studies, a wide electrochemical stability window up to 4 V is observed, which further emphasizes the commendable electrochemical behavior of these SPE films.     

Effect of Nanoclay on the Morphology and Properties of Nylon 6 and Poly(Methyl Methacrylate) (PMMA) Blends

The effect of organomodified nanoclay on the morphology and properties of a (70/30 w/w) nylon 6/poly(methyl methacrylate) (PMMA) blend prepared by a melt processing method was investigated. The number average domain diameter (D_n ) of the dispersed PMMA phase was found to decrease with the addition of a small amount [0.5 per hundred resin (phr)] of clay in the blend. A much finer dispersion of the minor phase in the presence of a higher amount (5 phr) of clay indicated better mixing efficiency and improved morphology in the blend. X-ray diffraction indicated the exfoliation of the clays in the nylon 6 matrix, whereas PMMA chains only intercalated into the clay layers. However, the same effect of the clay was not observed in a (30/70 w/w) nylon 6/PMMA blend when nylon 6 became the dispersed domains. In the (30/70 w/w) nylon 6/PMMA blend, the addition of organomodified nanoclay (up to 2 phr) increased the D_n of the nylon 6 domains by preferential location of the clays inside the nylon 6 domains. Addition of styrene-maleic anhydride (SMA) copolymer effectively reduced the D_n of disperse phases in both compositions of the nylon 6/PMMA blends. Thus, in nylon 6/PMMA blends, clay platelets could prevent the coalescence of dispersed domains during melt mixing as long as it was dispersed in the matrix phase of the blend. Mechanical properties and thermal stability of the blends were also improved in the presence of clay.     

Investigations on PMMA-PVdF polymer blend electrolyte with esters of dibenzoic acids as plasticizers

Plasticizers can be used to change the electrical and mechanical properties of polymer electrolytes by reducing the degree of crystallinity and lowering the glass transition temperature. The transport properties of gel type ionic conducting membranes consisting of poly (methyl methacrylate) (PMMA), poly (vinylidene fluriode) (PVdF), Lithium perchlorate (LiClO₄) and dioctyl phthalate (DOP), dibutyl phthalate (DBP), dimethyl phthalate (DMP) or diethyl phthalate (DEP) were studied. The polymer films were characterized by X-ray diffraction, Thermal, Fourier transform infrared and impedance spectroscopic studies. It is found that the addition of DMP as the plasticizer in the PMMA / PVdF-LiClO₄ polymer complex favours an enhancement in ionic conductivity. The temperature dependence of the conductivity of the polymer films seems to obey the VTF relation. The conductivity values are presented and the results are discussed.     

Role of salt concentration on conductivity optimization and structural phase separation in a solid polymer electrolyte based on PMMA-LiClO4

Although a large number of ionic conductors based on poly(methyl-methacrylate) (PMMA) are reported in literature, an optimization of salt concentration with respect to conductivity and stability properties remains by and large neglected. We report, perhaps for the first time, such an optimization of salt (LiClO₄) concentration on structural, morphological, electrical, and ion–polymer interaction in PMMA-based solid polymer films. The active coordination site for the cation (Li⁺), out of the two possible electron donating functional groups (i.e. C=Ö and Ö–CH₃) in PMMA, has been ascertained on the basis of evidences recorded in Fourier transform infrared spectrum. The results suggested C=Ö as the only possible site in PMMA matrix for coordination with Li⁺ cation. The X-ray diffraction results have clearly indicated an optimum limit of salt dissolution in PMMA matrix corresponding to O/Li = 4 (i.e., ~21wt.%) above which “phase-separation” occurs distinctly. The effect of salt concentration on amorphous → crystalline phase changes in PMMA and its correlation to morphology have been clearly observed in terms of their impact on electrical properties. An optimum electrical conductivity of ~7.2 × 10^?5S cm^?1 has been recorded at 100°C (~PMMA glass transition). The temperature dependence of conductivity follows typical Vogel–Tamman–Fulcher behavior.