Solvent extraction and extraction–voltammetric determination of phenols using room temperature ionic liquid

The phenolic compounds phenol, 4-nitrophenol, 2,4-dinitrophenol, 2,6-dinitrophenol, 1-naphthol, 2-naphthol, and 4-chlorophenol are extracted nearly quantitatively from aqueous solution into the room temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (BMImPF₆) in molecular form at pH<pK_a. Picric acid is extracted efficiently in anionic form. Recovery of pyrocatechol and resorcinol is much lower. The effect of pH, phenol concentration, and volume ratio of aqueous and organic phases were studied. Ionic liquid BMImPF₆ is shown to be suitable for extraction–voltammetric determination of phenols without back-extraction or addition of support electrolyte. The electrochemical window of BMImPF₆ at various electrodes was determined, and voltammetric oxidation of phenols and reduction of nitrophenols in BMImPF₆ was studied.     

Liquid-liquid extraction of α-activation products of iron with HDEHP

The carrier-free radiotracers,^52,56Mn,^55,56,58Co and^56,57Ni were produced simultaneously by accelerated -particle activation of iron. They were subsequently studied through LLX using the liquid cation exchanger, HDEHP, as an extractant. A considerable enrichment of individual carrier free radionuclides of manganese, cobalt and nickel was achieved. Production and verification of purity of the carrier-free radiotracers at different stages of their extraction were carried out by -ray spectroscopic studies.     

Systematic study of the solvent extraction of metal β-diketonates

The extraction of 30 metals (Be, Mg, Ca. Sr, Ba, Sc, La, Ti, Zr, Th, Cr, Mo, U, Mn, Co, Fe, Ni, Pd, Cu, Ag, Zn, Cd, Hg, Al, Ga, In, Tl, Sn, Pb and Bi) by solutions of acetylacetone, benzoylacetone and dibenzoylmethane in benzene has been studied in relation to the pH values for extraction. The extraction constants and two-phase stability constants of the β-diketonates were calculated; these can be used to determine the optimum conditions for the separation of many metals. The linear relationship between the distribution coefficients of β-diketones and their corresponding β-diketonates has been confirmed.     

Towards an understanding of solvent extraction – electroanalytical characterization of chloride-leaching solutions

Solvent extraction has been employed to purify media simulating chloride-leaching solutions resulting from complex sulfide concentrate processing, and cyclic voltammetry (CV) has been chosen to characterize those hydrometallurgical aqueous phases. The possibilities of the CV technique were investigated by the evaluation of the adequacy of a specific organic extractant, triisobutylphosphine sulfide, aimed to efficiently and selectively extract silver from a complex chloride medium, additionally containing tenfold to 40-fold molar concentrations of iron, copper and lead. The influence of the oxidation state of the metallic ions present in the feed solution, namely Cu(II) and Cu(I), is considered. The possibilities of CV analysis for the characterization of stripping solutions are also illustrated.     

Cloud point extraction of Δ9-tetrahydrocannabinol from cannabis resin

A cloud point extraction coupled with high performance liquid chromatography (HPLC/UV) method was developed for the determination of Δ⁹-tetrahydrocannabinol (THC) in micellar phase. The nonionic surfactant “Dowfax 20B102” was used to extract and pre-concentrate THC from cannabis resin, prior to its determination with a HPLC–UV system (diode array detector) with isocratic elution. The parameters and variables affecting the extraction were investigated. Under optimum conditions (1 wt.% Dowfax 20B102, 1 wt.% Na₂SO₄, T?=?318 K, t?=?30 min), this method yielded a quite satisfactory recovery rate (~81 %). The limit of detection was 0.04 μg?mL^?1, and the relative standard deviation was less than 2 %. Compared with conventional solid–liquid extraction, this new method avoids the use of volatile organic solvents, therefore is environmentally safer.     

Speciation of 30 % tri-n-butyl phosphate solvent during extraction of nitric acid

Several solutions of 30 % TBP/n-dodecane were equilibrated with different concentrations of aqueous nitric acid solutions at 298.15 K at a phase ratio of unity. The resultant equilibrated aqueous and organic solutions were analyzed for acidity. A three-solvate model with molecular HNO₃ based mechanism was assumed for nitric acid extraction by TBP. With nonlinear chemometric methods, the coefficients were evaluated. With the set of optimized coefficients, derived on the basis of experiments reported in this work, the estimated solvate species and free-TBP species in the TBP containing organic phase were found to be in good agreement with the reported concentrations in the literature.     

Correlation analysis of “arylic strengthening” of the extraction capacity of bidentate organophosphorus extractants

This paper is devoted to the so-called effect of anomalous arylic strengthening (AAS) observed upon extraction of a series of elements, mainly actinides and lanthanides, by bidentate neutral organophosphorus compounds (BNOPC). This anomalous effect is an increase in the extraction capacity of a reagent when alkyl substituents at the phosphorus atom are replaced with more electronegative aryl groups. The influence of phenyl substituents at the phosphorus atom on the reactivity of organophosphorus compounds of various types was considered. Based on the data on electronic effects of substituents, hypotheses were formulated about the reasons for AAS involving phenyl groups that are biphilic because they have substituents capable of manifesting both donor and acceptor properties depending on several factors such as,e.g., the nature of the reaction center, the character of the attacking reagent, the nature of the solvent,etc. When a strong complex of a metal with a phenyl substituted reagent of BNOPC is formed during extraction, the phenyl groups become donating, and additional strengthening of the complex appears.In extraction practice, the ratio of the extraction constants of an element with aryl- and alkyl-substituted reagents, K_ex ^Ar/K _ex ^Alk, is usually accepted as the quantitative estimationTranslated fromlzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2624–2630, November, 1996.     

Solvent extraction of uranium from aqueous solutions by α-benzoinoxime

Solvent extraction of uranium with α-benzoinoxime from aqueous solutions has been systematically investigated. The extraction equilibration was very fast and achieved at 60 s for uranium. The extraction of uranium was pH-dependent using α-benzoinoxime as extractant. The effect concentration of uranium and α-benzoinoxime was studied. The uranium loaded in the organic phase can be stripped efficiently with 93 % yield using 0.1 M HCl as the stripping agent in a single stripping step. A good selectivity for uranium was observed through α-benzoinoxime as extractant from aqueous solution with other interfering cation ions. Present study suggested that α-benzoinoxime can be used as a potential extractant for separation of uranium from aqueous solution using centrifugal extractor in industrial application.     

Microfluidic chip for electrochemically-modulated liquid∣liquid extraction of ions

A microfluidic device with integrated electrodes for the electrochemically-modulated extraction of ions across immiscible aqueous–organic liquid–liquid interfaces is presented. Using a Y-shaped microfluidic channel with in situ electrodes and co-flowing aqueous and organic immiscible electrolyte solutions, the manipulation of the applied interfacial potential enabled the extraction of ions from the aqueous phase into the organic phase. Data for the extraction of tetraethylammonium cations from aqueous electrolyte into 1,2-dichloroethane electrolyte are presented. The device demonstrates the benefits of combination of microfluidics and liquid–liquid electrochemistry.     

Development of molecularly imprinted-solid phase extraction combined with dispersive liquid–liquid microextraction for selective extraction and preconcentration of triazine herbicides from aqueous samples

In this study, a sensitive and developed method based on the use of molecularly imprinted-solid phase extraction along with dispersive liquid–liquid microextraction has been reported for selective extraction and pre-concentration of triazine pesticides from aqueous samples. Molecularly imprinted microspheres (template, atrazine) were synthesized using precipitation polymerization and used as sorbent in SPE procedure. A model solution containing the studied pesticides was slowly passed through the atrazine-MIP cartridge. The adsorbed analytes were eluted with methanol, mixed with carbon tetrachloride (as extraction solvent) and rapidly injected into deionized water. In this process, the analytes were extracted into fine droplets of carbon tetrachloride and the fine droplets were sedimented in bottom of the conical test tube by centrifugation. Finally, GC-FID was used for the separation and determination of analytes in the sedimented phase. Some important parameters affecting the performance of developed method were completely investigated. The linear ranges of calibration curves were wide and limits of detection and limits of quantification were between 0.2–7 and 0.5–20 ng mL^?1, respectively. The relative standard deviation obtained for six repeated experiments of atrazine (10 ng mL^?1) was 3.1 %. The relative recoveries obtained for the atrazine in the spiked samples were within in the range of 92–98 %.     

Identification and extraction—spectrophotometric or extraction—fluorimetric determination of organic nitrogen-containing triiodides, new biologically active compounds

A method for the identification of organic triiodides is proposed, and rapid, highly sensitive procedures for the extraction-spectrophotometric and extraction-fluorometric determination of medicinal preparations as ion associates with hydroxyxanthene (Eosin) and triphenylmethane (Bromothymol Blue) dyes. The formation of 1 : 1 ion associates with an absorption maximum at 545 nm (430 nm for ion associates with Bromothymol Blue) and a fluorescence maximum at 560 nm was detected. The ion associates were extracted with chloroform from a water-ethanol solution at pH 6.86 and 9.18. The detection limits were c_min ≈ 4.3 × 10^-7 M for the extraction-spectrophotometric and c_min ≈ 8.6 sx 10^-8 M for the extraction-fluorimetric procedure; RSD ≤2%. The developed procedures can be used for controlling medicinal preparations and monitoring biological materials     

BCR®-701: a review of 10-years of sequential extraction analyses

A detailed quantitative analysis was performed on data presented in the literature that focused on the sequential extraction of cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni), lead (Pb) and zinc (Zn) from the certified reference material BCR-701 (lake sediment) using the three-step harmonized BCR(?) procedure. The accuracy of data reported in the literature, including precision and different measures of trueness, was assessed relative to the certified values for BCR-701. Forty data sets were accepted following extreme outlier removal, and statistically summarized with measures of central tendency, dispersion, and distribution form. In general, literature data were similar in their measurement precision to the expert laboratories used to certify the trace element contents in BCR-701. The overall median precision for literature reported data was 10% (range 6-19%), compared to certifying laboratories of 9% (range 4-33%). One measure of literature data trueness was assessed via a confirmatory approach using a robust bootstrap method. Only 22% of the comparisons indicated significantly different (all were lower) concentrations reported in the literature compared to certified values. The question of whether the differences are practically significant for environmental studies is raised. Bias was computed as a measure of trueness, and literature data were more frequently negatively biased, indicating lower concentrations reported in the literature for the six trace elements for the three-step sequential procedure compared to the certified values. However, 95% confidence intervals about the average bias for the 18 comparisons indicated only four instances when a mean bias of 0 (i.e., measured=certified) was not incorporated-suggesting statistical difference. Finally, Z-scores incorporating a Horwitz-type function were used to assess the general trueness of laboratory data. Of the 468 laboratory Z-score values computed, 92% were considered to be satisfactory, 5% were questionable, and 3% were unsatisfactory. A detailed examination of the methodology sections of the various studies showed that despite claiming adherence to the harmonized BCR sequential extraction protocol, significant deviations were commonly observed; particularly in moisture correction, sample mass, centrifugation specifics, shaking specifics, and incorporation of filtration. It is likely that failure to strictly adhere to the protocol adversely impacted accuracy, by increasing the degree of imprecision and resulting in more discrepant trueness values.     

Biphasic recognition chiral extraction — novel way of separating pantoprazole enantiomers

This paper presents a biphasic recognition chiral extraction system developed as a new chiral separation technology for the separation of pantoprazole enantiomers, combining a hydrophilic β-CD derivative in the aqueous phase and a hydrophobic tartaric acid in the organic phase which preferentially recognise the (R)-enantiomer and (S)-enantiomer, respectively. In this study, a number of factors which influence the efficiency of the extraction were investigated including types of organic solvents, β-CD and tartaric acid esters and their concentrations, pH and temperature. As a result, enantioselectivity for pantoprazole enantiomers can be improved up to 1.42 under optimised conditions; in addition, it is clear that the combined action of β-CD and tartaric acid esters leads to formation of the biphasic chiral extraction system with a stronger separation capacity than a monophasic chiral extraction system.     

Lipophilic ternary complexes in liquid–liquid extraction of trivalent lanthanides

The formation of ternary complexes between lanthanide ions [Nd(III) or Eu(III)], octyl(phenyl)-N,N-diisobutyl-carbamoylmethylphosphine oxide (CMPO), and bis-(2-ethylhexyl)phosphoric acid (HDEHP) was probed by liquid–liquid extraction and spectroscopic techniques. Equilibrium modeling of data for the extraction of Nd(III) or Eu(III) from lactic acid media into n-dodecane solutions of CMPO and HDEHP indicates the predominant extracted species are of the type [Ln(AHA)₂(A)] and [Ln(CMPO)(AHA)₂(A)], where Ln?=?Nd or Eu and A represents the DEHP^? anion. FTIR (for both Eu and Nd) and visible spectrophotometry (in the case of Nd) indicate the formation of the [Ln(CMPO)(A)₃] complexes when CMPO is added to n-dodecane solutions of the LnA₃ compounds. Both techniques indicate a stronger propensity of CMPO to complex Nd(III) versus Eu(III).     

Liquid–liquid extraction of scandium with nalidixic acid in dichloromethane

The extraction behavior of nalidixic acid (HNA) in CH₂Cl₂ has been studied for various di- and trivalent metal ions such as Cu(II), Fe(II), Ni(II), Mn(II), Sb(II), Co(II), Sc(III), Y(III), Nd(III) and Eu(III) from aqueous buffer solutions of pH 1–7 with 0.1 mol dm⁻³ nalidixic acid in dichloromethane. Separation factors of Sc(III) from these metals has shown that its clean separation is possible at pH 3.4–4. The parameters affecting the extraction of Sc(III) were optimized. The composition of the extracted adduct was determined by slope analysis method that came out to be Sc(NA)₃. Extraction of Sc(III) was studied in the presence of various cations and anions. Among the anions studied only fluoride, citrate and oxalate have significant interference whereas, Fe(III) has reduced the extraction to 53% that can be removed by using ascorbic acid as reducing agent. The proposed extraction system proved good stability up to six extraction-stripping stages for the extraction of Sc(III).     

Interfacial behavior of plant proteins — novel sources and extraction methods

Understanding the air-water and oil-water interfacial behavior of plant proteins is crucial for developing stable emulsions and foams in food systems. Plant crops are often processed into protein extracts with high purity, which primarily consist of globulins. These globulins are often unable to form stiff interfacial layers owing to their compact and highly aggregated state and have inferior functionality compared with animal-derived proteins from milk or eggs. Much of the current focus is on modifying these proteins, whereas better interface stabilizing functionality can also be obtained by choosing more targeted protein extraction methods. This review will highlight the benefits and drawbacks of current and novel protein sources and protein extraction methods with respect to interfacial properties.     

Studies on extraction of In(Ⅲ) with 8-hydroxyquinoline

The equilibrium molalities of In3 in extraction reaction: In3 (aq) 3HOx(org) = In(Ox)3(org) 3H (aq) were measured at ionic strengths from 0.13 to 2.54 mol-kg-1 in the aqueous phase containing Na2SO4 as the supporting electrolyte and at constant initial molality of extractant, HOx, in the organic phase at temperatures from 278.15 to 308.15 K, where HOx and Ox mean 8-hydroxy-quinoliue and its anion, respectively. The standard extraction constants K0 at various temperatures were obtained by two methods proposed in our previous paper.     

Synthesis of novel calix[4]crown telomers and selective extraction of cesium ions

p-tert-Butylcalix[4]diazacrown-4 telomer, which contains hard and soft ion binding sites, was synthesized. It exhibited high selectivity toward cesium ions. The binding sites may complex alkali metal ions selectively.