商品聚氯乙烯膜的等离子体表面处理改性的研究

利用辉光放电技术,将C_2H_2/CO_2/H_2的等离子体聚合物沉积处理聚氯乙烯商品膜表面进行改性。用红外光声光谱和扫描电子显微镜分析观察了等离子体改性的聚氯乙烯膜的结构和表面形态。测量了改性膜的水接触角,计算了它们的表面自由能,界面自由能以及表面功,从而研究了改性膜的亲水性。同时,利用热重分析仪(TGA)研究了改性膜的热稳定性。     

聚丙烯微孔膜表面的空气等离子体处理

采用空气等离子体对聚丙烯微孔膜进行了处理，膜表面带有了氧元素，表面亲水性增强。微孔膜外表面改性程度较高，而孔内愈往深处改性程度愈弱。空气等离子体处理过的微孔膜力学性能下降。     

低温等离子体对聚合物多孔膜的亲水化改性

综述了低温等离子体在聚合物多孔膜表面亲水化改性领域的研究与应用进展。在简要介绍等离子体技术的原理、方法的基础上,讨论了Ar、He、O2、N2、CO2、H2O、NH2和SO2等非反应性和反应性气体的等离子体表面处理,烷基醇、烷基胺、烯丙基醇和烯丙基胺等饱和及不饱和单体的等离子体沉积聚合,以及烯类单体的等离子体引发的接枝聚合等等离子体方法,对膜表面和膜孔壁的化学组成和形态结构、膜亲水性的获得及其时效性、膜水通量和蛋白质抗污染性等方面的影响。     

低温等离子体对超高分子聚乙烯纤维表面改性研究

介绍了低温等离子放电技术的概念、原理、实施方法及其在超高分子量聚乙烯（UHMWPE）纤维表面改性方面的应用。综述了国内外低温等离子体对UHMWPE纤维表面改性的最新研究成果,阐述了气体等离子体种类、处理功率和处理时间等因素对UHMWPE纤维表面改性效果的影响机理,以及低温等离子设备对UHMWPE纤维表面改性连续化的初步...     

乙烯等离子体处理的云母表面结构及表面性质

用元素分析、色-质谱、裂解气相色谱和顺磁共振等方法研究了经乙烯等离子体处理的云母表面化学结构及处理过程。结果表明,云母颗粒表面形成了厚数十埃的等离子体聚乙烯膜,其化学结构与反应体系中无云母时得到的等离子体聚乙烯膜相同。通过扫描电镜观察到云母片表面的聚合膜具有规则的海星状花样,随处理时间的延长花样按比例长大。水与云母表面的接触角数据说明,乙烯等离子体处理使云母表面的疏水性提高到聚乙烯的水平,比氩气等离子体、硅烷偶联剂及钛酸酯偶联剂处理的效果均更为显著。     

医用聚氯乙烯膜的等离子体表面改性

用两种不同气氛的辉光放电等离子体工艺对医用软质聚氯乙烯（ＰＶＣ）膜进行了表面改性研究。结果表明，聚合性气氛的等离子体改性效果明显优于非聚合性气氛。平整致密的聚合膜对ＰＶＣ增塑剂——邻苯二甲酸二辛酯的迁移和扩散起了阻挡作用，也使膜表面亲水性和表面张力极性成份增大，液固相界面张力减小，生物相容性得以改善。     

高强聚乙烯纤维的冷等离子体改进

高强聚乙烯纤维的冷等离子体改进金士九，倪亦斌，张佐光（中国科学院化学研究所北京１０００８０）（北京航空航天大学北京）关键词　高强聚乙烯纤维，等离子体，表面改性，界面性能由高强聚乙烯纤维制成的复合材料抗高速撞击（抗弹）性能远远优于芳纶纤维，广泛用作各种...     

聚烯烃分离膜表面改性研究进展

综述了聚烯烃类分离膜表面改性研究的主要进展,着重介绍了高能辐射接枝、光引发接枝、等离子体接枝、表面臭氧处理、以及超临界CO2状态下接枝等表面改性方法的特点,分析了改性后聚烯烃膜的性能,并对聚烯烃分离膜表面改性进行了展望。     

聚乙丙交酯电纺纳米纤维膜的等离子体改性及性能研究

采用等离子体表面处理的方法, 通过正交实验设计, 以纤维膜表面引入的氮含量为响应变量, 确定了NH3等离子体改性PLGA电纺纤维膜的最佳条件, 并在PLGA纤维膜表面成功地引入了功能性氨基基团. 研究结果表明, 改性后PLGA电纺纤维膜的力学性能有所降低, 但表面亲水性明显增强.     

PVDF膜改性的方法研究

本文介绍了目前国内外聚偏氟乙烯(PVDF)超滤膜改性中常用的膜表面改性方法和膜材料改性方法。PVDF膜表面改性主要通过膜表面的物理改性、磺化改性、表面接枝改性、光化学改性、低温等离子体改性等方法来实现;而PVDF膜材料的改性主要是通过PVDF与亲水性高分子材料或小分子无机粒子的共混以及膜材料本体的化学改性来实现。改性PVDF膜的亲水性增强,使水通量增加,提高了机械性能,改善了抗污染性,增加了膜的使用寿命。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.