Molekül- und Kristallstruktur des Dimeren Magnesium-bis[bis(trimethylsilyl)amids]

Molecular and Crystal Structure of the dimeric Magnesium bis[bis(trimethylsilyl)-amide] The magnesium bis[bis(trimethylsilyl)amide] crystallizes as a dimeric molecule in the space group C2/c with {a = 1821.0(4); b = 1494.4(4); c = 1859.6(6) pm; β = 121.10(2)°; Z = 4 dimers}. The cyclic planar Mg₂N₂ moiety shows endocyclic NMgN angles of 95.8°. The bond lengths within this ring system to the four-coordinate, bridging nitrogen atoms N^b are 215 pm, whereas the distances between the magnesium atom and the terminal, three-coordinate nitrogen atom N^t display values of approximately 198 pm. These different coordination numbers of the nitrogen atoms affect the NSi bond length (N^tSi 171, N^bSi 177 pm).     

Bis(trimethylsilyl)amide und -methanide des Yttriums — Molekülstrukturen von Tris(diethylether-O)lithium-(μ-chloro)-tris[bis(trimethylsilyl) methyl]yttriat,solvensfreiem Yttrium-tris[bis(trimethylsilyl)amid] sowie dem Bis(benzonitril)-Komplex

Bis(trimethylsilyl)amides and -methanides of Yttrium — Molecular Structures of Tris(diethylether-O)lithium-(μ-chloro)-tris[bis(trimethylsilyl)methyl]yttriate, solvent-free Yttrium Tris[bis(trimethylsilyl)amide] as well as the Bis(benzonitrile) Complex The reaction of yttrium(III) chloride with the three-fold molar amount of LiE(SiMe₃)₂ (E = N, CH) yields the corresponding yttrium derivatives. Yttrium tris-[bis(trimethylsilyl)amide] crystallizes in the space group P3 1c with a = 1 636,3(2), c = 849,3(2) pm, Z = 2. The yttrium atom is surrounded trigonal pyramidal by three nitrogen atoms with Y? N-bond lengths of 222 pm. Benzene molecules are incorporated parallel to the c-axes. The compound with E = CH crystallizes as a (Et₂O)₃LiCl-adduct in the monoclinic space group P2₁/n with a = 1 111,8(2), b = 1 865,2(6), c = 2 598,3(9) pm, β = 97,41(3)° and Z = 4. The reaction of yttrium tris[bis(trimethylsilyl)amide] with benzonitrile yields the bis(benzonitrile) complex, which crystallizes in the triclinic space group P1 with a = 1 173,7(2), b = 1 210,3(2), c = 1 912,4(3) pm, α = 94,37(1), β = 103,39(1), γ = 117,24(1)° and Z = 2. The amido ligands are in equatorial, the benzonitrile molecules in axial positions.     

Desulfurization and transformation of isothiocyanates to cyanamides by using sodium bis(trimethylsilyl)amide

Sodium bis(trimethylsilyl)amide was first used as the desulfurizing agent for the conversion of isothiocyanates to cyanamides in a ‘one-flask’ reaction.     

Synthesis and characterization of sodium bis(trimethylstannyl) amide and bis(trimethylsilyl) bis(trimethylstannyl) -phospha-tetrazene

Sodium bis(trimethylstannyl)amide NaN(SnMe₃)₂, isolated by the reaction of trimethylstannyldiethylamine with sodium amide, reacts with tris(trimethylsilyl)hydrazino—dichloro-phosphine to form bis(trimethylsilyl)bis(trimethylstannyl)-2-phospha-2-tetrazene, (Me₃Si)₂N-N=P-N(SnMe₃)₂. Both the molecules have been isolated and characterized.     

Synthesis and Structural Characterization of Bis(tetrahydro­pyran)calcium Bis[bis(trimethylsilyl)amide]

Transmetalation of Sn[N(SiMe₃)₂]₂ with calcium granules in tetrahydropyran (thp) yields colorless [(thp)₂Ca{N(SiMe₃)₂}₂] ( 1 ) which is soluble in common organic solvents. The calcium center is in a distorted tetrahedral environment with Ca–N and Ca–O bond lengths of 231.08(11) and 240.23(9) pm, respectively. The molecular structure is dominated by steric factors leading to a NCaN bond angle of 119.43(6)°.     

‘One-flask’ transformation of isocyanates and isothiocyanates to guanidines hydrochloride by using sodium bis(trimethylsilyl)amide

A ‘one-flask’ synthesis of guanidines was developed by reacting isocyanates and isothiocyanates with sodium bis(trimethylsilyl)amide followed by addition of primary or secondary amines with a catalytic amount of AlCl₃. The desired guanidines were obtained in good yields and the reaction was applicable to aliphatic and aromatic substrates. A plausible mechanism was proposed through the generation of cyanamide anion from isocyanates or isothiocyanates with sodium bis(trimethylsilyl)amide. Addition of amines and catalytic amount of AlCl₃ smoothly converted the cyanamides to the desired guanidines.     

Regioselective radical ring-opening reaction of bicyclo[4.2.0]octan-2-ones promoted by samarium(II) iodide

Radical ring-opening reactions of bicyclo[4.2.0]octanones, its C6 alkyl derivatives, and tricyclic ketones promoted by SmI₂ gave cyclohexanones via fission of the external cyclobutane bond. The CO₂Me, CN, and phenyl derivatives led to the production of the eight-membered ring compounds through cleavage of the central cyclobutane bond. Using this regioselective reaction, the synthesis of (±)-acorenone was achieved.     

Strontium- und Barium-bis[N,N′ -bis(trimethylsilyl)benzamidinate] aus der Additionsreaktion der Erdalkalimetall-bis[bis(trimethylsilyl)amide] mit Benzonitril

Strontium and Barium Bis[N,N′-bis(trimethylsilyl)benzamidinates] from the Addition Reaction of the Alkaline Earth Metal Bis[bis(trimethylsilyl)amides] and Benzonitrile The reaction of strontium bis[bis trimethylsilyl)amide] with benzonitrile yields strontium bis[N,N′- bis(trimethylsilyl)benzamidinate] · 2THF, which crystallizes in the orthorhombic space group Pbcn (a = 1845.4(3); b = 131 1,3(2); c = 1838,(3) pm; Z = 4). During the similar reaction of barium bis[bis(trimethylsilyl)amide] with benzonitrile the benzonitrile adduct barium bis[N,N′-bis(trimethylsilyl)benzamidinate] · 2 THF · benzonitrile is formed. After the addition of diphenylacetylene to the strontium di(benzamidinate) in diglyme a clathrate of the composition strontium bis[N,N′-bis(trimethylsilyl)benzamidinate] · diglyme · diphenylacetylene could be isolated; the spectroscopic data as well as the X-ray structure (monoclinic, C2/c, a = 1492.2(2); b = 1539.1(2); c = 2337.8(3)pm; Z = 4) confirm the isolated appearance of the acetylene molecule without interaction to the metal center in solution and in the solid state, respectively.     

Synthese,Eigenschaften und Struktur von Amin-Addukten der Lithium-tris[bis(trimethylsilyl)methyl]zinkate

Synthesis, Properties, and Structure of the Amine Adducts of Lithium Tris[bis(trimethylsilyl)methyl]zincates . Bis[bis(trimethylsilyl)methyl]zinc and the aliphatic amine 1,3,5-trimethyl-1,3,5-triazinane (tmta) yield in n-pentane the 1:1 adduct, the tmta molecule bonds as an unidentate ligand to the zinc atom. Bis[bis(trimethylsilyl)methyl]zinc · tmta crystallizes in the triclinic space group P1 with {a = 897.7(3); b = 1 114.4(4); c = 1 627.6(6) pm; α = 90.52(1); β = 103.26(1); γ = 102.09(1)°; Z = 2}. The central C₂ZnN moiety displays a nearly T-shaped configuration with a CZnC angle of 157° and Zn? C bond lengths of 199 pm. The Zn? N distances of 239 pm are remarkably long and resemble the loose coordination of this amine; a nearly complete dissociation of this complex is also observed in benzene. The addition of aliphatic amines such as tmta or tmeda to an equimolar etheral solution of lithium bis(trimethylsilyl)methanide and bis[bis(trimethylsilyl)methyl]zinc leads to the formation of the amine adducts of lithium tris[bis(trimethylsilyl)methyl]zincate. Lithium tris[bis(trimethylsilyl)methyl]zincate · tmeda · 2 Et₂O crystallizes in the orthorhombic space group Pbca with {a = 1 920.2(4); b = 2 243.7(5); c = 2 390.9(5) pm; Z = 8}. In the solid state solvent separated ions are observed; the lithium cation is distorted tetrahedrally surrounded by the two nitrogen atoms of the tmeda ligand and the oxygen atoms of both the diethylether molecules. The zinc atom is trigonal planar coordinated; the long Zn? C bonds with a value of 209 pm can be attributed to the steric and electrostatic repulsion of the three carbanionic bis(trimethylsilyl)methyl substituents.     

Synthesis and Characterization of Poly(meta-aryl sulfide amide amide)

Poly(meta-aryl sulfide amide amide) (m-PASAA) was prepared with aromatic nucleophilic substitution reaction: by the step polycondensation of sodium sulfide(Na₂S· xH₂O) with 3,3′ -bis(4-diflurobenzoyl) aryl diamine between 180–202°C at atmospheric pressure. The polymers were characterized by FT-IR spectrum, ¹H-NMR spectrum, ¹³C-NMR spectrum, X-ray diffraction, element analyzer, DSC, TGA, AFM, instron universal tester and dissolvability experiment. The intrinsic viscosity of m-PASAA was 0.41–0.46 dl/g obtained with optimum synthesis conditions. The polymers were found to have excellent thermal performance with glass transition temperature (T_g) of 233.5–277.8°C, initial degradation temperature (T_d) of 447–456.7°C. They could afford flexible and strong films with tensile strengths 38.4–46.1MPa. At the same time, their solubility was much better than polyphenylene sulfide (polyphenylene sulfide scarcely dissolves in whole organic solvents under 200°C (1 Yang, J. 2006. PAS resin and its application, China: Chemical Industry Press.  [Google Scholar])).     

The Solubility of Bis(cyclopentadienyl)samarium(II) and Implications for the Reaction of Samarium Metal with Bis(cyclopentadienyl)mercury(II)

Bis(cyclopentadienyl)samarium(II) has been shown to be insoluble in thf : ether mixtures, hence it cannot be isolated as a soluble product from the reaction of samarium with HgCp₂ in thf : ether.     

双[1,3-二(三甲硅基)环戊二烯基]四羰基二铁的反应性

题示化合物分子中的铁铁键被钠汞齐还原断裂, 生成相应的单核铁负离子, 后者分别与PhCOCl, PhCH~2Cl,ClCH~2COOC~2H~5, Ph~3SnCl 及Ph~2SnCl~2进行亲核取代反应,生成在铁原子上引入相应取代基的产物。题示化合物分别与卤素和二氯化汞反应, 生成铁铁键断裂的铁卤化物和铁氯汞化物。用X-射线测定了题示化合物与Ph~3SnCl反应生成产物的晶体和分子结构。     

Molekül- und Kristallstruktur von Magnesium-bis[bis(trimethylsilyl)phosphanid] · DME

Molecular and Crystal Structure of Magnesium Bis[bis(trimethylsilyl)phosphide] · DME Magnesium bis[bis(trimethylsilyl)phosphide] crystallizes in the tetragonal space group I4 c2 with a = 1652.9(2); c = 2282.6(5) pm and Z = 8. The magnesium atom is distorted tetrahedrally surrounded by two oxygen and two phosphorus atoms with Mg? P- and Mg? O-bond lengths of 248.7(2) and 204.7(5) pm, respectively. The phosphorus atom displays a trigonal pyramidal coordination.     

Silyl stabilized azanes: Reactions of mono- and dilithium bis(trimethylsilyl)hydrazide with dichloro- and tetrachlorostannane

SnCl₄ acts primarily as an oxidant and oxidizes monolithium bis(trimethylsilyl) hydrazide 1 to mainly bis(trimethylsilyl)amine, BSA and tris(trimethylsilyl)hydrazine, TrSH and itself get reduced to SnCl₂. Similarly, reaction of SnCl₄ with dilithiumbis(trimethylsilyl) hydrazide 2, oxidizes it to lithium tris(trimethylsilyl)hydrazide, Li-TrSH. Reaction of dichlorostannane (reduction of oxidation state of tin from +4 to +2) with 1 gives a simple substitution reaction and give a pale yellow solid, 1,4-bis(trimethylsilyl)-1,2,4,5-tetraza-3,6-distannacyclohexane, 3b. Whereas, in reaction of 2 with SnCl₂ intermediate stannimine [(Me₃Si)₂N-NSn], tetramerizes and further loses tetrakis(trimethylsilyl)tetrazene, TST to give a cubane compound [(Me₃Si)N-Sn]₄, 4.     

Tris[bis(trimethysilyl)amido]zinkate von Lithium und Calcium

Tris[bis(trimethylsilyl)amido]zincates of Lithium and Calcium Calcium-bis[bis(trimethylsilyl)amide] and Bis[bis(trimethylsilyl)amido]zinc yield in 1,2-dimethoxyethane quantitatively Calcium-bis{tris[bis(trimethylsilyl)- amido]zincate} · 3DME. When THF is chosen as a solvent, the two reactants and the zincate form a temperature-independent equilibrium, whereas in benzene no reaction occurs. The tris[bis(trimethylsilyl)amido]zincate anion displays characteristic ¹³C{¹H) and ²⁹Si{¹H] chemical shifts of 7 and ?8 ppm, respectively; the nature of the solvent, the cation and the complexating ligands don't influence the IR nor NMR data of the zincate anion and thus verify that [Ca(DME)₃]²⁺ and {Zn[N(SiMe_{3 2}]₃}^? appear as solvent separated ions, which is also confirmed by their insolubility in hydrocarbons.     

Synthesis of novel bis(chromenes) and bis(chromeno[3,4-C]pyridine) incorporating piperazine moiety

Novel bis(2-oxo-2H-chromene) as well as bis(2-imino-2H-chromene) derivatives incorporating piperazine moiety were prepared by the cyclocondensation reaction of bis(2-hydroxybenzaldehyde) with two equivalents of each of the appropriate β-ketoesters or acetonitrile derivatives. The bis(2-imino-2H-chromene-3-carbothioamide) derivative was used as a key synthon for construction of novel bis(3-(4-substituted thiazol-2-yl)-2H-chromen-2-one) derivatives via its cyclocondensation with a series of the appropriate α-halocarbonyl derivatives. Moreover, the bis(2-hydroxybenzaldehyde) reacted with four equivalents of the appropriate acetonitrile derivatives to afford the corresponding bis(3H-chromeno[3,4-c]pyridine) derivatives. Elucidation of the structure of the novel bis(chromenes) bearing piperazine nucleus was established by the spectral data and elemental analyses.     

含1-(2-甲氧乙基)茚基和二(三甲硅基)胺基的稀土有机配合物的合成和表征

无水三氯化稀土（ＬｎＣｌ３），二（三甲硅基）胺基钾（ＬｉＮ（ＳｉＭｅ３）２〗及１－（２－甲乙基）茚室温上在四氢呋喃溶剂中反应，得到了４个含１－（２－甲氧乙基）茚基和二（三甲硅基）胺基的稀土金属有机物｛（Ｃ９Ｈ６ＣＨ２Ｃ２ＯＭｅ）Ｌｎ〖Ｎ（ＳｉＭｅ３）２〗２（Ｌｎ＝Ｎｄ，Ｓｍ，Ｄｙ，Ｙｂ）｝，这些配合物均经元素分析、ＩＲ和ＭＳ表征。     

Synthesis of volatile bis[bis(trimethylsilyl)amide]-substituted boron derivatives

Russian Journal of General Chemistry - General strategy for the synthesis of organoboron compounds containing bis(trimethylsilyl)amide substituents has been suggested.     

Ethylene polymerization by bis(salicylaldiminate)nickel(II)/aluminoxane catalysts

The homopolymerization of ethylene by using different catalytic systems based on dinitro‐substituted bis(salicylaldiminate)nickel(II) precursors such as bis[3,5‐dinitro‐N(2,6‐diisopropylphenyl)]nickel(II) and bis[3,5‐dinitro‐N(phenyl)]nickel(II) in combination with organoaluminum compounds was investigated. In particular, the catalytic performances were studied as a function of the main reaction parameters, such as temperature, pressure, Al/Ni molar ratio, and duration. Methylaluminoxane resulted in the best co‐catalyst. Activities up to 200 kg polyethylene/(mol Ni × h) to give a linear high‐molecular‐weight polymer were achieved. The influence of the bulkiness of the substituents on the N‐aryl group of the aldimine ligand was also checked; it resulted in a determinant for catalytic activity rather than for polymer characteristics. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2534–2542, 2004     

Simple non-empirical calculations of the zero-field splitting in bis(aquo) bis(malonato) nickel(II)

Summary A simple non-empirical method is applied to calculate the splittings of the ground state triplet, caused by the spin-orbit coupling, in bis(aquo) bis(malonato) nickel(II), allowing for a certain geometry variation. The calculations yield splittings on the order of 10–20 cm^–1. The comparison of exact (within model) and second-order perturbation theory calculations indicate that the spin Hamiltonian formalism is valid. The implications of the results for the theory of nuclear spin relaxation in paramagnetic complexes in solution are discussed.