Quantitation and stability of piperacillin and tazobactam in plasma and ultrafiltrate from patients undergoing continuous venovenous hemofiltration by HPLC

Simple and reproducible HPLC methods for the determination of piperacillin and tazobactam have been developed and a complete stability study carried out. The method for piperacillin plasma samples consisted of protein precipitation with methanol using penicillin G as internal standard. No sample preparation was needed for ultrafiltrate samples. Tazobactam sample preparation involved protein precipitation with acetonitrile and the removal of lipids with dichloromethane. Piperacillin separation was performed on a microBondapack C(18) column (300 x 3.9, 10 microm) and tazobactam on a Novapack C(18) column (150 x 3.9, 4 microm) with UV detection set at 229 and 225 nm, respectively. The mobile phase consisted of phosphate buffer-acetonitrile, delivered at 1.5 mL[sol ]min. Calibration curves determination coefficients were >or=0.999 and response factors CV% < 5%. Intra- and inter-assay precision and accuracy of the quality control and limit of quantification were satisfactory. Plasma and ultrafiltrate samples were stable at -20 and -80 degrees C for 2 months and after three freeze-thaw cycles. In the chromatographic rack, tazobactam ultrafiltrate samples were stable for 24 h and plasma samples for 12 h, piperacillin ultrafiltrate samples for 8 h, but plasma samples for only 4 h. Storage of piperacillin samples at 4 degrees C until analysis is recommended. Piperacillin was stable in the presence of tazobactam.     

Stability studies of testosterone and epitestosterone glucuronides in urine

The stability of testosterone glucuronide (TG), epitestosterone glucuronide (EG) and the T/E ratio in urine has been studied. Samples were analyzed by gas chromatography coupled to mass spectrometry (GC/MS). Urine samples were submitted to a solid-liquid cleanup followed by extraction of unconjugated testosterone (T) and epitestosterone (E) with tert-butyl methyl ether (free fraction). The remaining aqueous phase was hydrolyzed with beta-glucuronidase and extracted at alkaline pH with n-pentane. Analytes were analyzed by GC/MS as their enol-trimethylsilyl (TMS) derivatives. The urine for stability testing was obtained from an excretion study after the administration of T to healthy volunteers. The homogeneity of the sample was verified before starting the stability study. The stability of TG and EG was evaluated at different storage conditions. For long-term stability testing, analyte concentration in urine stored at 4 degrees C and -20 degrees C was determined at different time intervals for 22 months. For short-term stability testing, analyte concentration was evaluated in urine stored at 37 degrees C for 3 and 7 days. The effect of repeated freezing (at -20 degrees C) and thawing (at room temperature) was studied for up to three cycles. Data obtained in this work demonstrated the stability of TG, EG and the T/E ratio in sterilized urine samples stored at 4 and -20 degrees C for 22 months and after going through repeated freeze/thaw cycles. Decreases in concentration were observed after 7 days of storage at 37 degrees C due to the partial cleavage of the glucuronide conjugates; however, the T/E ratio was not affected. These results show the feasibility of preparing reference materials containing TG and EG to be used for quality control purposes.     

Cold-temperature stability of five beta-lactam antibiotics in bovine milk and milk extracts prepared for liquid chromatography-electrospray ionization tandem mass spectrometry analysis

The stability of five major beta-lactam antibiotics (amoxicillin, ampicillin, cloxacillin, oxacillin, and penicillin G) in fortified milk and in milk extracts prepared for LC-ESIMS/MS analysis was studied at varying cold temperatures (4, -20, and -76 degrees C). Storage of milk samples at 4 degrees C resulted in measurable losses of all beta-lactams after 6 days (>50% in most cases). Slow degradation of penicillin G, cloxacillin, and oxacillin was observed in milk stored at -20 degrees C, but no losses were recorded at -76 degrees C over 4 weeks. All antibiotics showed good stability at all temperature tested in milk extracts prepared for LC-ESIMS/MS analysis. The results of this study emphasize adherence to adequate sample handling and storage protocols as to reflect residue levels at the time of sample submission.     

Stability of organophosphorus insecticides on graphitized carbon black extraction cartridges used for large volumes of surface water

The stability of nine organophosphorus insecticides (azinphos-ethyl, azinphos-methyl, diazinon, EPN, ethion, fonofos, malathion, phosmet and parathion-methyl) was evaluated under a variety of storage conditions. Large volumes of surface water (4 l) were extracted using large-particle-size graphitized carbon black cartridges (Carbopack B 60-80 mesh). The effects of temperature, matrix type and drying of cartridges on the recovery of these contaminants, after different storage periods, were studied and compared to the conservation of surface water in bottles. After a 2-month period, all the chemicals stored on cartridges and kept at -20 degrees C remained stable, with recoveries ranging from 70 to 134%. By contrast, phosmet and EPN could no longer be recovered from the bottled surface water. Cartridges kept at -20 degrees C fared better than did those stored at 4 degrees C and 20 degrees C. The type of matrix water selected appears to have kept the target pesticides stored on cartridges from degrading, compared to the Milli-Q water, in which malathion and phosmet were unstable. The effect of the cartridges being either wet or dry made no difference in terms of improving the recovery of chemicals. After immediate surface water extraction, the most practical storage condition for the target insecticides was found to be storage on cartridges in the dark at -20 degrees C, with no drying or solvent washing of the Carbopack B material.     

Study of the stability of selenium compounds in human urine and determination by mixed ion-pair reversed-phase chromatography with ICP-MS detection

The stability of five selenium compounds, selenate, Se(VI), selenourea, SeUr, trimethylselenonium ion, TMSe(+), selenomethionine, SeMet, and selenoethionine, SeEt, at concentrations from 30-60 micro g L(-1) in a pooled human urine, stored in dark at -20 degrees C, 4 degrees C, or ambient temperature (ca. 25 degrees C), without addition of any stabilizing reagent was evaluated. The investigated Se species were determined independently by mixed ion-pair reversed-phase liquid chromatography with inductively coupled plasma mass spectrometric (ICP-MS) detection. The general trend is the lower the temperature used for storage, the higher the stability of Se species, when other conditions such as light, acidity, and container material are kept constant. On the basis of these results it is considered that the storage of urine samples at -20 degrees C for a short-term (within one month) is safe for Se speciation analysis. Long-term storage of urine samples for speciation analysis should, however, be undertaken with caution.     

The stability of non-ionic surfactants and linear alkylbenzene sulfonates in a water matrix and on solid-phase extraction cartridges

The stability of nonylphenol ethoxylates (NPEO), alcohol ethoxylates (AEO), coconut diethanol amides (CDEA) and linear alkylbenzene sulfonates (LAS) in a water matrix and preconcentrated on SPE cartridges was studied. A stability study was carried out in a water matrix (spiked ground water and real-world waste water) comparing different pretreatment procedures (addition of sulfuric acid to pH = 3, preservation with 1% and 3% of formaldehyde). When stored in a water matrix serious qualitative and quantitative changes occurred in waste water during the period of time studied (30 days). The losses of C12-C14 alcohol ethoxylates ranged from 72% to 88% when the sample was preserved with acid and from 17% to 86% when the sample was preserved with formaldehyde (3%). Simultaneously, an enrichment of the shorter alkyl chain homologues (C7EO and C10EO) was observed. The losses of NPEO were from 45% (sample preserved by acidification or by addition of 3% of formaldehyde) to 85% (sample preserved with 1% of formaldehyde). Additionally, an increase in concentration of polyethylene glycols (PEGs) and formation of different acidic forms, such as monocarboxylated (MCPEGs) and dicarboxylated polyethylene glycols (DCPEGs) were observed. The stability of surfactants preconcentrated on SPE cartridges was studied as a function of storage time and storage conditions (room temperature, 4 degrees C and -20 degrees C). The results indicate that disposable SPE cartridges can be recommended for the stabilization of non-ionic surfactants and LAS. Storage at -20 degrees C is feasible for long periods (up to 3 months for ground water and up to 2 months for waste water), while storage at 4 C can be recommended for a maximum of 1 month. When cartridges were kept at -20 degrees C the losses of AEOs (n = 12, 13 and 14), preconcentrated from waste water, ranged from 17 to 29% (after 60 days) and other compounds suffered small losses (maximum of 14% for C13LAS). At room temperature, after 7 days, the losses were less than 11%, indicating that shipping of samples by mail can be done without any special requirements.     

Retrospective identification of chemical warfare agents by high-temperature automatic thermal desorption-gas chromatography-mass spectrometry

An automated thermal desorption (ATD)-gas chromatography-mass spectrometry method was developed for the analysis of selected chemical warfare (CW) agents. Suitable methods were developed for analytes of high volatility to low volatility. The less volatile CW agents required the purchase and installation of a high-temperature valve upgrade kit allowing valve temperatures of up to 260 degrees C to be reached. The limit of detection was 50 ng on the tube for most CW agents in full scan. Chloropicrin exhibited some temperature dependence, with detection limits improving as ATD temperatures were decreased below 150 degrees C. A sample storage trial was undertaken to establish the most suitable storage environment for CW agents adsorbed onto Tenax TA. Temperature and time of storage were found to influence recovery of analytes with best recoveries being observed after 1 day storage in a freezer (-12 degrees C). This method was evaluated during a trial of procedures for sampling and identification of chemical agents at Porton Down, UK. Sulfur mustard was detected downwind of a simulated exploded munition.     

Saponin Stabilization via Progressive Freeze Concentration and Sterilization Treatment

Saponin is a biopesticide used to suppress the growth of the golden apple snail population. This study aims to determine the stabilized conditions for saponin storage. The maceration process was used for saponin extraction, and for saponin concentration, progressive freeze concentration (PFC) was used. Afterwards, stability analysis was performed by storing the sample for 21 days in two conditions: Room temperature (26 °C) and cold room (10 °C). The samples kept in a cold room were sterilized samples that undergo thermal treatment by placing the sample in the water bath. The non-sterilized samples were kept in room temperature condition for 21 days. The results showed that saponin stored in the cold room (sterilized sample) has low degradation with higher concentration than those stored at room temperature in stability analysis with the highest saponin concentration (0.730 mg/mL) at a concentration temperature of −6 °C and concentration time of 15 min. The lowest saponin concentration obtained by saponin stored at room temperature (non-sterilized sample) is 0.025 mg/mL at a concentration temperature of −6 °C and concentration time of 10 min. Thus, the finding concluded that saponin is sensitive to temperature. Hence, the best storage condition to store saponin after thermal treatment is to keep it in a cold room at 10 °C.     

Stability of sulfonated derivatives of benzene and naphthalene on disposable solid-phase extraction pre-columns and in an aqueous matrix

The stability of 14 sulfonated benzene and naphthalene compounds was investigated using polymeric solid-phase extraction cartridges, based on the styrene-divinylbenzene polymer Isolute ENV+. Several different storage conditions were tested to carry out the stability study in polymeric cartridges, which included storage at room temperature, at 4 degrees C and at -20 degrees C, during a period of up to 3 months. An additional stability study was carried out, not with the polymeric solid matrix, but in an aqueous matrix. This study was performed storing the samples at 4 degrees C, during 2 months under three different conditions: acidifying the water sample to pH 2.5-3 with sulfuric acid, adding 1% of formaldehyde (additive used in waste water analyses), and storing the water sample at 4 degrees C without any additives. The extraction of the SPE process is analyzed by ion-pair chromatography-electrospray mass spectrometry, in the negative ion mode. This study showed that the stability of polar aromatic sulfonic acids on disposable polymeric cartridges and in the water matrix is related to temperature and pH, respectively. Target aromatic sulfonated compounds stored in polymeric solid-phase extraction cartridges, are more stable at lower temperatures. The target analytes showed also good stability when stored in water at acidic pH. From the different analytes studied, substituted naphthalenesulfonates suffered more degradation than mononaphthalenesulfonates or benzenesulfonates under the experimental conditions of this work.     

Thyreostatic drugs, stability in bovine and porcine urine

Thyreostatic drugs, illegally administrated to livestock for fattening purposes, are banned in the European Union since 1981. For monitoring their illegal use, sensitive and specific analytical methods are required. In this context, the knowledge of the stability in a matrix is of primary importance. This study aimed at evaluating the effects of preservation, number of freeze-thaw cycles, and matrix-related variables on the stability of thyreostatic drugs in the urine of livestock. Finally, the developed conservation approach was applied on incurred urine samples, which displayed traces of the thyreostat thiouracil below the recommended concentration of 10 μg L(-1). The stability study confirmed the negative influence of preservation (8 h) at room temperature and at -70 °C, decreases in concentration of more than 78.0% were observed for all thyreostats, except for 1-methyl-2-mercaptoimidazole and 2-mercaptobenzimidazole. Additionally, investigation of matrix-related variables indicated significant impacts of the presence of copper (p = 0.001) and the pH (p = 0.002). Next, an optimised pre-treatment (pH 1 and 0.1 M ethylenediaminetetraacetic acid disodium salt dehydrate) significantly differing from the original conservation approach (p < 0.05) was developed, which proved capable of delaying the decrease in concentration and improved the detection in time for both spiked as well as incurred urine samples. In the future, it seems highly advisable to apply the developed pre-treatment on incurred urines upon sampling, before thyreostat analysis. Additionally, it is recommendable to limit preservation of urine samples at room temperature, but also in the freezer prior to thyreostat analysis.     

High performance liquid chromatographic determination of mazindol in human plasma.

A simple and convenient high performance liquid chromatographic method with UV detection is described for the determination of mazindol [5-(p-chlorophenyl)-2,5-dihydro-3H-imidazo[2,1-a]isoindol-5-ol] and its major metabolite, 2-(2-aminoethyl)-3-(p-chlorophenyl)-3-hydroxyphthalimidine (Met), in human plasma. The analytes were extracted with ethyl acetate from plasma samples and separated on a C18 column using acetonitrile-0.067 mol dm(-3) phosphate buffer (pH 3.5) (24 + 76 v/v) as a mobile phase. The eluates were monitored at 220 nm. Following complete validation and stability studies, the proposed method proved to be sensitive and precise. The limits of detection were 0.07 and 0.08 ng ml(-1) of plasma for mazindol and Met, respectively. The accuracy and recovery were in the ranges 94-102% and 91-102%, respectively, for both compounds. The intra- and inter-assay precisions were less than 7.6 and 9.2%, respectively, for both compounds. The stability of mazindol under different storage conditions, i.e., at room temperature (rt) and 4 degrees C and with freeze-thaw cycles, was also examined. Mazindol was unstable in plasma samples left at rt and 4 degrees C. The method was applied to the determination of mazindol and Met in the plasma of a patient treated for obesity with mazindol.     

Determination of L-753,037 in human plasma by liquid chromatography/turbo ionspray tandem mass spectrometry.

A liquid chromatographic/turbo ionspray tandem mass spectrometric (LC/MS/MS) method was developed and validated for the determination of L-753,037, a potent endothelin receptor antagonist currently under development for the treatment of cardiovascular diseases, in human plasma. L-753,037 is extracted from 0.5 ml of human plasma using liquid-liquid extraction and analyzed by LC/MS/MS with a turbo ionspray interface. Method validation results showed that this method is very sensitive, reliable, selective and reproducible. L-753,048, an ethoxy analogue of L-753,037, was used as the internal standard. The method has a lower limit of quantitation (LOQ) of 50 pg ml(-1) with a linear calibration range of 0.05-50 ng ml(-1). The intra-day precision and accuracy (n = 5) were measured to be below 10% relative standard deviation (RSD) and between 97.4 and 102.8% of the nominal values, respectively, for all calibration standard concentrations within the calibration curve range. The inter-day precision and accuracy (n = 3 days, 5 replicates per day) were measured to be below 6.5% RSD and between 99.3 and 102.0% of the nominal values, respectively, for all quality control concentrations. The extraction recovery was determined to be approximately 99% on average. The analyte was found to be stable in plasma through three freeze-thaw cycles, for at least 4 h at ambient temperature and for up to 40 days under -20 degrees C freezer storage conditions. The analyte was also shown to be stable for at least 24 h in the reconstitution solution at room temperature and for up to 3 days as a dried extract at 4 degrees C. Additional variations in plasma concentration of the analyte due to the use of different sources of plasma were also evaluated.     

NH4NO3 extractable trace element contents of soil samples prepared for proficiency testing--a stability study.

In view of its intended use as a sample for proficiency testing or as a reference material the stability of the extractable trace element contents of a soil from an irrigation field was tested using the extraction with 1 mol/L ammonium nitrate solution according to DIN 19730. Therefore, changes of the extractability of sterilized and non sterilized soil samples stored at different temperatures were evaluated over a period of 18 months. Sets of bottles were kept at -20 degrees C, +4 degrees C, about +20 degrees C and +40 degrees C, respectively. The NH4NO3 extractable contents of Cd, Cr, Cu, Ni, Pb and Zn were determined immediately after bottling and then after 3, 6, 12 and 18 months with ICP-AES or ETAAS. Appropriate storage conditions are of utmost importance to prevent deterioration of soil samples prepared for the determination of NH4NO3 extractable trace element contents. Temperatures above +20 degrees C must be avoided. The observed changes in the extractability of the metals (especially for Cr and Cu) most likely could be related to thermal degradation of the organic matter of the soil. There is no need to sterilize dry soil samples, because microbiological activity in soils with a low moisture content appears to be negligible with regard to trace element mobilization.     

In situ temperature-time effect on MetA-S-SIMS

Metal-assisted (MetA) static secondary ion mass spectrometry (S-SIMS) is one of several ion yield enhancing methods developed for S-SIMS in the last decades. MetA-S-SIMS uses a very thin coating of gold or silver on the sample. Earlier experiments revealed dependence of the ion yield enhancement on the applied metal, the nature of the studied sample, the time after metallization, and the heating temperature (ex situ, i.e., under atmospheric pressure). This paper reports on the effects of time and temperature when samples are heated to temperatures between 30 and 80 degrees C inside the S-SIMS vacuum chamber (in situ). Thick layers of poly(vinylbutyral-co-vinylalcohol-co-vinylacetate) (PVB) containing dihydroxybenzophenone (DHBPh) were coated with a nm-thin-layer of gold. The S-SIMS analysis was performed over a period of several hours while samples were kept at a constant elevated temperature. Compared to ex situ heating in an oven, heating in the analysis chamber provided more rapid signal enhancement, but the magnitude of the enhancement was less (by a factor of two). Furthermore, additional experiments on ex situ heated samples revealed that storage of samples with enhanced ion yields at -8 degrees C is not sufficient to "stabilize" the enhancement. A steep decrease of the ion yields was observed as a function of time after 2.5 h.     

Development and validation of a sensitive ELISA for quantitation of Grastim (rhG-CSF) in rat plasma: Application to a pharmacokinetic study

Grastim is bacterially produced recombinant counterpart of human granulocyte colony stimulating factor (G-CSF). It has biological activity similar to that of endogenous G-CSF. In the present work a sensitive, accurate, precise and enzyme-linked immunosorbent assay (ELISA) for the quantitation of G-CSF in rat plasma was developed and validated. The ELISA method employed a technique in which anti-human-G-CSF was adsorbed onto 96-well maxisorp plates and used to capture the G-CSF in rat plasma samples. The captured G-CSF was then detected using streptavidin-HRP amplification system. Absolute recovery was >90% from rat plasma. The validation includes assessments of method accuracy and precision, range of reliable response, lower limit of quantitation (LLOQ), storage stability (30 days) in rat plasma and assay specificity. The standard curve for G-CSF was linear (R2 > 0.996) in the concentration range 4.88-625 pg/mL. The LLOQ was established at 4.88 pg/mL. The inter- and intra-day precisions in the measurement of quality control (QC) samples, 15, 250 and 500 pg/mL, were in the range 3.00-8.66% relative standard deviation (RSD) and 1.03-4.69% RSD, respectively. Accuracy in the measurement of QC samples was in the range 87.28-110.79% of the nominal values. The assay shows dilutional linearity and specificity. Stability of G-CSF was established for 30 days at -80 degrees C and through three freeze-thaw cycles. The validated assay was successfully employed for the assessment of pharmacokinetic disposition of G-CSF in rats.     

The Novartis compound archive -- from concept to reality

As HTS technologies come of age, pharmaceutical companies are focusing increasingly on the quality of their screening collections. Storage conditions and their influence on compound stability and solubility are debated intensely. At Novartis, a strategy was developed that is different to most other companies: (1) compounds unsuitable for storage in solution are excluded by computational methods; (2) compounds are stored at 4 degrees C/20% relative humidity in a DMSO/water mixture to avoid freeze-thaw cycles and water uptake and to allow rapid plate replication; (3) resolubilisation of compounds at regular intervals.     

Determination of rosuvastatin in rat plasma by HPLC: Validation and its application to pharmacokinetic studies

A specific, accurate, precise and reproducible high-performance liquid chromatography (HPLC) method was developed for the estimation of rosuvastatin (RST), a novel, synthetic and potent HMG-CoA inhibitor in rat plasma. The assay procedure involved simple liquid-liquid extraction of RST and internal standard (IS, ketoprofen) from a small plasma volume directly into acetonitrile. The organic layer was separated and evaporated under a gentle stream of nitrogen at 40 degrees C. The residue was reconstituted in the mobile phase and injected onto a Kromasil KR 100-5C18 column (4.6 x 250 mm, 5 microm). Mobile phase consisting of 0.05 m formic acid and acetonitrile (55:45, v/v) was used at a flow rate of 1.0 mL/min for the effective separation of RST and IS. The detection of the analyte peak was achieved by monitoring the eluate using a UV detector set at 240 nm. The ratio of peak area of analyte to IS was used for quantification of plasma samples. Nominal retention times of RST and IS were 8.6 and 12.5 min, respectively. The standard curve for RST was linear (r2 > 0.999) in the concentration range 0.02-10 microg/mL. Absolute recoveries of RST and IS were 85-110 and >100%, respectively, from rat plasma. The lower limit of quantification (LLOQ) of RST was 0.02 microg/mL. The inter- and intra-day precisions in the measurement of quality control (QC) samples, 0.02, 0.06, 1.6 and 8.0 microg/mL, were in the range 7.24-12.43% relative standard deviation (RSD) and 2.28-10.23% RSD, respectively. Accuracy in the measurement of QC samples was in the range 93.05-112.17% of the spiked nominal values. Both analyte and IS were stable in the battery of stability studies, viz. benchtop, autosampler and freeze-thaw cycles. RST was found to be stable for a period of 30 days on storage at -80 degrees C. The application of the assay to determine the pharmacokinetic disposition after a single oral dose to rats is described.     

Assessment of total arsenic and arsenic species stability in alga samples and their aqueous extracts

In order to achieve reliable information on speciation analysis, it is necessary to assess previously the species stability in the sample to analyse. Furthermore, in those cases where the sample treatment for species extraction is time-consuming, an assessment of the species integrity in the extracts is of paramount importance. Thus, the present paper reports total arsenic and arsenic species stability in alga samples (Sargassum fulvellum and Hizikia fusiformis), as well as in their aqueous extracts, which were stored in amber glass and polystyrene containers at different temperatures. Total arsenic determination was carried out by inductively coupled plasma atomic emission spectroscopy (ICP-AES), after sample acid digestion in a microwave oven, while arsenic speciation was conducted by anion exchange high performance liquid chromatography on-line coupled to ICP-AES, with and without sample introduction by hydride generation (HPLC-ICP-AES and HPLC-HG-ICP-AES), after aqueous microwave-assisted extraction. The results obtained for solid alga samples showed that total arsenic (for Hijiki alga) and arsenic species present (As(V) for Hijiki and NIES No. 9 Sargasso) are stable for at least 12 months when samples are stored in polystyrene containers at +20 degrees C. On the other hand, a different behaviour was observed in the stability of total arsenic and As(V) species in aqueous extracts for both samples, being the best storage conditions for Sargasso extracts a temperature of -18 degrees C and polystyrene containers, under which they are stable for at least 15 days, while Hijiki extracts must be stored in polystyrene containers at +4 degrees C in order to ensure the stability for 10 days.     

Comparison of sampling efficiency and storage stability on different sorbents for determination of solvents in occupational air

This study describes the sampling efficiency and storage stability of compounds typically present in occupational atmospheres on the sorbents Anasorb CSC, Anasorb 747, and Chromosorb 106. The selection of compounds included in the study contained aliphatic and aromatic hydrocarbons, alcohols, esters, glycol ethers, ketones, and halogenated compounds, thus representing a wide range of chemical and physical properties. The different sorbent tubes were simultaneously exposed to the selected compounds as three different mixtures of solvent vapours in air, and storage both at room temperature and at -22 degrees C was investigated. The sorbent tubes were stored and analyzed at two different laboratories. The sampling efficiencies of all the investigated compounds were excellent on Anasorb CSC and Anasorb 747, while Chromosorb 106 did not give such good results for the most volatile compounds under study. The room temperature storage stability on Chromosorb 106, however, was good for all compounds, although formation of artefacts was observed during storage, a disadvantage that was substantially reduced by storage at -22 degrees C. The room temperature storage stability on Anasorb CSC was good for all compounds except some of the ketones. The room temperature storage stability of these ketones, especially cyclohexanone and 2-butanone, was much better on Anasorb 747, which still showed the same excellent storage stability for the remaining compounds. When stored in a freezer, the storage stability of all compounds, including the ketones, was very good on all sorbents. Among the sorbents under study, Anasorb 747 appears to be the most suitable all-round sorbent for monitoring volatile compounds in occupational air, with satisfactory capabilities regarding both sampling efficiency and storage stability.     

Stability study and determination of benzene- and naphthalenesulfonates following an on-line solid-phase extraction method using the new programmable field extraction system

Seven benzene- and naphthalenesulfonates (3-nitrobenzenesulfonate, 4-methylbenzenesulfonate, 1-hydroxy-4-naphthalenesulfonate, 1-amino-7-naphthalenesulfonate, 4-chlorobenzenesulfonate, 1-naphthalenesulfonate and 2-naphthalenesulfonate) were studied. A rapid method for quantifying aromatic sulfonated compounds from waste water samples was developed. This method consists in on-line in-field sampling and monitoring based on ion-pair solid-phase extraction with PLRP-S sorbent, using the new programmable field extraction system and ion-pair liquid chromatography with UV diode-array and electrospray mass spectrometry. Limits of detection for the studied compounds, using the SIM acquisition mode, ranged from 0.01 to 0.33 ng ml(-1). The influence of the aqueous matrix on the on-line SPE was checked by spiking ground and waste waters. Recoveries varied from 70 to 99% when 10 ml of water sample were enriched. The method was applied to the analysis of some environmental sewage samples. This study confirmed that high concentration levels of aromatic sulfonated compounds can be found in sewage samples. In addition, the stability of the seven studied sulfonated benzene and naphthalene compounds was investigated using on-line polymeric SPE pre-columns, based on the styrene-divinylbenzene polymer PLRP-S. Different storage conditions were tested to carry out the stability survey, which included storage at room temperature, at 4 degrees C and at -20 degrees C, during a period of up to 2 weeks. This study showed that the stability of aromatic sulfonic acids on disposable on-line SPE polymeric pre-columns is related to temperature and that the target compounds are more stable at lower temperatures.