固定金属离子亲和色谱--蛋白质分离的方法、原理、特性和应用

介绍了固定金属离子亲和色谱法(IMAC)的方法原理、金属螯合柱的制备、固定金属离子与蛋白质的相互作用以及影响这些作用的因素、不同色谱条件下各种作用力对蛋白质保留值的贡献、蛋白质的洗脱原理和IMAC在蛋白质分离纯化中的应用,论述了IMAC的特点、不足、克服的方法和今后应解决的问题。     

新型连续棒状疏水色谱柱的制备及其色谱性能研究

采用连续棒柱制备技术,制备了一种甲基丙烯酸缩水甘油酯-甲基丙烯酸丁酯-已二酸二甲基丙烯酸酯三元共聚物连续棒疏水色谱柱。考察了聚合条件对聚合物孔结构及介质疏水性的影响。应用该色谱柱对标准蛋白混合样及基因工程药物γ-INF和胰岛素的前驱体Pro-insulin提取液进行了分离纯,效果良好。     

生物大分子液相色谱分离中色谱柱长与柱径比的优化研究

用厚度为 1cm、而直径不同的色谱饼 (或饼形色谱柱 )对 7种蛋白质进行了色谱谱分离 ,得出了柱长与柱径比对生物大分子分离度影响不大的结论。还对柱内腔几何体积相同、而柱长 柱径比不同的色谱柱和色谱饼对分离度的影响以及它们压力降作了比较 ,结果表明色谱饼可在几乎不降低分离度的前提下显著降低色谱系统的压力。通过对 1 0× 5 0mmI.D .色谱饼体积和质量负载量以及质量回收率的测定 ,表明色谱饼对生物大分子的分离已达到制备规模。     

金属螯合亲和色谱中的疏水作用

通过考察盐溶盐和盐析盐浓度对蛋白质在IDA裸柱和金属螯合柱上保留行为的影响,详细研究了金属螯合色谱中的疏水作用,疏水作用的发生、形成的条件以及不同条件下对蛋白质保留值的贡献。实验结果表明,在高浓度和低浓度的盐溶盐以及低浓度盐析盐中,蛋白质在金属螯合柱上的保留主要受静电和配位作用控制,而疏水作用对蛋白质的保留影响很小。对弱亲和性的金属螯合柱以静电作用为主,其大小可用参数Q表征;对强亲和性的IDA-Cu（Ⅱ）柱以配位作用为主。仅在高浓度的盐析盐中,金属螯合柱才呈现较强的疏水作用,支配蛋白质保留。实验证明,金属螯合色谱中疏水作用主要来自固定相间隔臂中的疏水碳链和盐析盐对蛋白质的增疏作用,利用这种疏水作用有可能改善金属螯合色谱分离的选择性。     

径向色谱中溶质的输运特征

基于溶质在径向色谱柱内输运的质量平衡方程, 在线性分配条件下, 得到了描述分离柱效和流出曲线形状各参数的理论表达式, 也对柱效和流出曲线对称性的变化趋势加以系统讨论. 结果表明: 径向色谱中, 柱效与体积流速之间的关系与轴向色谱中柱效与流动相线速度的关系在趋势上相同; 在较高流速下运行时, 径向色谱仍可以得到高柱效. 随着溶质容量因子、进样时间的增加, 柱效单调降低. 柱直径和柱长对柱效的影响存在交叉, 设计半径较大而长度较短的色谱柱将更有利于提高分离柱效. 径向色谱适宜于大分子样品的稳定分离方法建立, 也预示其对于蛋白、DNA等样品的制备分离具有明显优势.     

金属硫蛋白异构体及亚型异构体的液相色谱分离与质谱鉴别

建立了金属硫蛋白(MT)异构体及亚型异构体的色谱分离与质谱鉴别方法。将金属硫蛋白混合物通过弱阴离子DEAE Sephadex A-25离子交换柱,结合离线电感耦合等离子体质谱(ICP-MS)对锌诱导金属硫蛋白的两个异构体MT-1和MT-2进行分离和检测;利用Sephadex G-25凝胶排阻色谱柱对得到的两个金属硫蛋白异构体进行脱盐;探索脱盐后的金属硫蛋白异构体在不同色谱条件下的C18反相色谱柱上的保留行为,进而实现各个亚型异构体的分离;通过在线电喷雾质谱检测实现了对金属硫蛋白各个亚型异构体的鉴别。结果表明,通过优化色谱条件,由离子交换色谱及凝胶排阻色谱得到的金属硫蛋白各亚型异构体在酸性条件下均得到了良好的分离,质谱检测结果与前人的文献报道结果一致。该方法可使金属硫蛋白各异构体均达到最佳的分离效果。     

增强型绿色荧光蛋白的色谱分离和纯化

增强型绿色荧光蛋白(EGFP)是生物领域常用的标记物。在前期成功克隆表达EGFP的基础上,本实验建立了两步分离纯化EGFP的色谱方法,并验证其分离纯化效果,检验EGFP的活性。首先用金属螯合亲和色谱柱HisTrap HP对EGFP的重组菌体破碎上清液进行初步分离,再用葡聚糖凝胶排阻色谱柱Sephadex G-10 HR对其进行脱盐纯化。采用丙烯葡聚糖凝胶排阻色谱柱Sephacryl S-300 HR和十二烷基磺酸钠-聚丙烯酰胺凝胶电泳(SDS-PAGE)检测分离纯化后的EGFP纯度。最后通过荧光分光检测器和非变性聚丙烯酰胺凝胶电泳(Native-PAGE)验证分离纯化后的EGFP是否具有荧光活性。结果表明该方法可以简便快速地分离纯化EGFP,纯度超过98%,同时保持了EGFP的荧光活性。     

反相离子对色谱中死体积变化特性的研究

高效液相色谱法中溶质在色谱柱上的保留行为通常由容量因子k′表示,k′值的确定须由色谱柱死体积V_0计算得到,所以V_0测定尤为重要。关于反相离子对色谱中死体积研究较少,Bidlingmeyer用甲醇作探剂测定反相离子对色     

分离生物大分子的液相色谱固定相

本文介绍了各类用于生物大分子分离的液相色谱填料,并对它们在生物大分子分离及制备中的性能、基本特征作了评述。     

复合纤维素金属螯合膜色谱介质的制备及其分离生物大分子的研究

以棉纤维为基质 ,通过聚合、接枝、开环反应合成了亚氨二乙酸型金属螯合复合膜色谱介质 ,考察了反应温度 ,反应时间对合成介质性能的影响 ,并对复合纤维素膜的表面物理性能及蛋白质的结合性能进行了表征 .实验结果表明 ,膜色谱介质对蛋白质具有较大的吸附容量 ,分离效果与凝胶介质相当 ,但分离速度快 3～ 5倍 .复合膜色谱介质还具有负压低 ,成本低 ,使用寿命长等特点 ,适于生物大分子的快速大规模分离纯化 ,并用于高效液相色谱对生物大分子的快速定量分析 .     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.