The role of phosphine in cobalt-catalyzed carbonylative polymerization of N-alkylaziridine

A series of CH₃COCo(CO)₃L complexes (1, L = PCy₃; 2, L = PMe₂Ph; 3, L = PPh₃; 4, L = P(para-F-Ph)₃; 5, L = P(meta-F-Ph)₃; and 6, L = P(ortho-tolyl)₃) were studied as precatalyst for the title polymerization. The Co-P bond length primarily responds to the cone angle of the phosphine ligand (6 > 1 > 2 ≈ 3 ≈ 4 ≈ 5), while the back-donation to the axial acetyl ligand and the equatorial CO ligand depends on the electron-donating ability of the phosphine and increases in the order 1 > 6 > 2 > 3 > 4 > 5. The equilibrium constant for CH₃COCo(CO)₃L + CO ↔ CH₃COCo(CO)₄ + L depends on the electron-donating ability of the phosphine ligand except for 6 and follows the order 6 ? 5 > 4 > 3 > 2 > 1. The catalytic activity follows the order 6 > 5 > 4 > 3 > 1 > 2. The activity difference cannot be explained solely by the above equilibrium and is consistent with the competition for the acyl site by the phosphine as nucleophile against aziridine. The production of the β-lactam byproduct is attributed to catalyst decomposition, which is accelerated to the basicity/nucleophilicity of the phosphine ligand.     

Synthesis, characterization, and catalytic activities in syndiospecific polymerization of styrene for half-sandwich titanium complexes with non-Cp tridentate dianionic ligands MeN(CH2CR2O)2

New half-titanocenes, Cp^∗TiCl[(OCR₂CH₂)NMe(CH₂CR^′₂O)] [R,R′ = H (1), R,R′ = Me, H, (2), R,R′ = Me (3)], were prepared from Cp^∗TiCl₃ (4) with the corresponding alcohols in the presence of triethylamine. X-ray analysis shows that 1 has slightly distorted trigonal bipyramidal geometry around Ti. These complexes exhibited moderate catalytic activities for syndiospecific styrene polymerization in the presence of MAO and the activity increased in the order: 2 > 1 > 4 > 3 (at 50 °C), 1 > 2 > 4 > 3 (at 70 °C and 90 °C).     

Thermal hydrosilylation of olefin with hydrosilane. Preparative and mechanistic aspects

The reaction of trichlorosilane (1a) at 250 °C with cycloalkenes, such as cyclopentene (2a), cyclohexene (2b), cycloheptene (2c), and cyclooctene (2d), gave cycloalkyltrichlorosilanes [C_nH_2n−1SiCl₃: n = 5 (3a), 6 (3b), 7 (3c), 8 (3d)] within 6 h in excellent yields (97-98%), but the similar reactions using methyldichlorosilane (1b) instead of 1a required a longer reaction time of 40 h and afforded cycloalkyl(methyl)dichlorosilanes [C_nH_2n−1SiMeCl₂: n = 5 (3e), 6 (3f), 7 (3g), 8 (3h)] in 88-92% yields with 4-8% recovery of reactant 2. In large (2, 0.29 mol)-scale preparations, the reactions of 2a and 2b with 1a (0.58 mol) under the same condition gave 3a and 3b in 95% and 94% isolated yields, respectively. The relative reactivity of four hydrosilanes [HSiCl_3−mMe_m: m = 0-3] in the reaction with 2a indicates that as the number of chlorine-substituent(s) on the silicon increases the rate of the reaction decreases in the following order: n = 3 > 2 > 1 ? 0. In the reaction with 1a, the relative reactivity of four cycloalkenes (ring size = 5-8) decreases in the following order: 2d > 2a > 2c > 2b. Meanwhile linear alkenes like 1-hexene undergo two reactions of self-isomerization and hydrosilylation with hydrosilane to give a mixture of the three isomers (1-, 2-, and 3-silylated hexanes). In this reaction, the reactivity of the terminal 1-hexene is higher than the internal 2- and 3-hexene. The redistribution of hydrosilane 1 and the polymerization of olefin 2 occurred rarely under the thermal reaction condition.     

Fluorogenic dual click derived bis-glycoconjugated triazolocoumarins for selective recognition of Cu(II) ion

Carbohydrate based fluorescent sensors S1 and S2 have been developed by fluorogenic dual click chemistry and are characterized by various spectroscopic techniques. Both the fluorescent probes displayed highly selective detection of Cu²⁺ ions by means of fluorescence quenching. The job plot experiment suggested 1:1 complexation of probes S1 and S2 with Cu²⁺ ions having detection limit of 6.99 μM and 7.30 μM, respectively. The binding constants for S1-Cu²⁺ and S2-Cu²⁺ complexation were evaluated to be 3.34 × 10³ M⁻¹ and 5.93 × 10³ M⁻¹, respectively.     

Synthesis,structure and properties of [ML(NO3)2]: M = Co,Ni, Cu; L = N-(2-pyridylethyl)pyridine-2-carbaldimine

Syntheses of complexes of the type [ML(NO₃)₂], where M = Co(II), Ni(II), and Cu(II), L = N-(2-pyridylethyl)pyridine-2-carbaldimine, a tridentate ligand, are described. They were characterized by elemental analysis, spectral, magnetic, thermal studies, and X-ray crystallography. In the cobalt (1), nickel (2), and copper (3) complexes, the bivalent metal ion is coordinated by the three nitrogen atoms of the tridentate L with two pyridine-N groups occupying trans positions. Amongst the two nitrates one coordinates in a bidentate fashion while the other adopts a monodentate fashion. The X-band EPR spectra of 1, 2, and 3 in the polycrystalline state and in acetonitrile solution at 77 K are reported. Room temperature vibrating sample magnetometer data of 1, 2, and 3 afforded μ_eff values respectively of 3.928, 3.897, and 1.952 BM. The thermal stability order is 1 > 2 > 3, showing a reverse Irving-Williams trend.     

Platinum-catalyzed double silylations of alkynes with bis(dichlorosilyl)methanes

Bis(dichlorosilyl)methanes 1 undergo the two kind reactions of a double hydrosilylation and a dehydrogenative double silylation with alkynes 2 such as acetylene and activated phenyl-substituted acetylenes in the presence of Speier’s catalyst to give 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes 4 as cyclic products, respectively, depending upon the molecular structures of both bis(dichlorosilyl)methanes (1) and alkynes (2). Simple bis(dichlorosilyl)methane (1a) reacted with alkynes [R¹-CC-R²: R¹ = H, R² = H (2a), Ph (2b); R¹ = R² = Ph (2c)] at 80 °C to afford 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 as the double hydrosilylation products in fair to good yields (33-84%). Among these reactions, the reaction with 2c gave a trans-4,5-diphenyl-1,1,3,3-tetrachloro-1,3-disilacyclopentane 3ac in the highest yield (84%). When a variety of bis(dichlorosilyl)(silyl)methanes [(Me_nCl_3 − nSi)CH(SiHCl₂)₂: n = 0 (1b), 1 (1c), 2 (1d), 3 (1e)] were applied in the reaction with alkyne (2c) under the same reaction conditions. The double hydrosilylation products, 2-silyl-1,1,3,3-tetrachloro-1,3-disilacyclopentanes (3), were obtained in fair to excellent yields (38-98%). The yields of compound 3 deceased as follows: n = 1 > 2 > 3 > 0. The reaction of alkynes (2a-c) with 1c under the same conditions gave one of two type products of 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes (4): simple alkyne 2a and terminal 2b gave the latter products 4ca and 4cb in 91% and 57% yields, respectively, while internal alkyne 2c afforded the former cyclic products 3cc with trans form between two phenyl groups at the 3- and 4-carbon atoms in 98% yield, respectively. Among platinum compounds such as Speier’s catalyst, PtCl₂(PEt₃)₂, Pt(PPh₃)₂(C₂H₄), Pt(PPh₃)₄, Pt[ViMeSiO]₄, and Pt/C, Speier’s catalyst was the best catalyst for such silylation reactions.     

A unique ‘ON-OFF-ON’ switch with two perturbations at two different concentrations of Ag

The dipod 1,2-bis(8-quinolinoxymethyl)benzene 3 and tetrapod 1,2,4,5-tetrakis(8-quinolinoxymethyl)benzene 4 show two perturbations in fluorescence with Ag⁺, (i) fluorescence quenching with <1.0 equiv of AgNO₃ at λ_max 395 nm and (ii) fluorescence enhancement at λ_max 500 nm with >3 equiv of AgNO₃. This ‘ON-OFF-ON’ switching of 3 and 4 in comparison with simultaneous fluorescence quenching and enhancement in the case of 8-methoxyquinoline 1 and the tripod 1,3,5-trimethyl-2,4,6-tris(8-quinolinoxymethyl)benzene 2 point to the unique role of molecular architectures arising due to the number and spatial positions of quinoline units in the fluorescence behaviour of an 8-alkoxyquinoline moiety towards Ag⁺.     

Syntheses, structures and catalytic activity of copper(II) complexes bearing N,O-chelate ligands

Copper complexes [Cu(Lⁿ)₂] 1-4 bearing N,O-chelating β-ketoamine ligands Lⁿ based on condensation products of 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone with aniline (L¹), α-naphthylamine (L²), o-methylaniline (L³), and p-nitroaniline (L⁴), respectively, were synthesized and characterized by IR, ¹H NMR and X-ray crystallography (except 2). They were shown to catalyze the vinyl polymerization of norbornene when activated by methylaluminoxane (MAO). Both steric and electronic effects are important and influential factors contributing to the catalytic activity of the complexes with the order of 2 > 4 > 3 > 1.     

From symmetrical to unsymmetrical bimetallic nickel complexes bearing aryl-linked iminopyridines; synthesis, structures and ethylene polymerisation studies

Both symmetrical and unsymmetrical tetramethylphenyl-linked iminopyridines, 1,4-{(2-C₅H₄N)RCN}₂-2,3,5,6-Me₄C₆ [R = H (L1a), Me (L1b)] and 1-{(2-C₅H₄N)HCN}-4-{(2-C₅H₄N)MeCN}-2,3,5,6-Me₄C₆ (L1c), have been prepared in good yield using straightforward condensation strategies. The molecular structures of L1a and L1c reveal the adjacent imino and pyridyl nitrogen atoms to adopt transoid configurations. Interaction of L1x with two equivalents of NiX₂ [NiX₂ = (DME)NiBr₂ (DME = 1,2-dimethoxyethane), NiCl₂] in n-BuOH at elevated temperature affords the paramagnetic bimetallic complexes, [(L1x)Ni₂X₄] [L1x = L1a, X = Br (1a); L1x = L1b, X = Br (1b); L1x = L1c, X = Br (1c); L1x = L1a, X = Cl (1d)] in moderate to good yield. Adduct formation results on treatment of bromide-containing 1a-1c with DMF (dimethylformamide) to yield dicationic [(L1x)Ni₂Br₂(DMF)₆]Br₂ [L1x = L1a (2a), L1b (2b), L1c (2c)], while with chloride-containing 1d the neutral species [(L1a)Ni₂Cl₄(DMF)₄] (3) is obtained. Activation of 1a-1d and 2c with excess methylaluminoxane (MAO) generates active ethylene polymerisation catalysts (1b/MAO > 1c/MAO > 1a/MAO ∼ 1d/MAO > 2c/MAO) affording mixtures of waxes and low molecular weight solid polyethylene. Multinuclear NMR and GC analysis of the waxy components reveal methyl branched materials that contain mostly internal unsaturation along with low levels of α-olefins. Broad molecular weight distributions are observed for all the polymers obtained, with that from 1b/MAO leading to the highest molecular weight. Single crystal X-ray diffraction studies have been performed on L1a, L1c, 2a-2c and 3.     

Various silyl-substituted cyclopentadienyl titanium complexes [CpSi(CH3)2X]TiCl3 as catalysts for syndiotactic polystyrene

Three silyl-substituted titanium trichloride complexes [CpSi(CH₃)₂X]TiCl₃ [X=Cl(1), Me(2), PhOMe(3)] were tested as catalyst precursors for the syndiospecific polymerization of styrene. The catalytic activity increased in the order 1 > 2 > 3. The highest activity was 2.42 × 10⁷ g s-PS/mol Ti mol S h using complex 1/MAO catalytic system at molar ratio of Al/Ti=2000. The effects of variation on polymerization temperature and Al/Ti ratio on the polymerization of styrene were also studied.     

Aqueous organometallic chemistry. 3. Catalytic hydride transfer reactions with ketones and aldehydes using [Cp∗Rh(bpy)(H2O)](OTf)2 as the precatalyst and sodium formate as the hydride source: Kinetic and activation parameters, and the significance of steric and electronic effects

The reaction of a precatalyst, [Cp∗Rh(bpy)(H₂O)](OTf)₂ (1), with sodium formate provided the hydride complex, [Cp∗Rh(bpy)(H)]⁺ (2), in situ, at pH 7.0, which was then evaluated in an aqueous, catalytic hydride transfer process with water soluble substrates that encompass 2-pentanone (3), cyclohexanone (4), acetophenone (5), propionaldehyde (6), benzaldehyde (7), and p-methoxybenzaldehyde (8). The initial rates, r_i, of appearance of the reduction product alcohols at 23 °C provided a relative rate scale: 8 > 7 ≈ 6 > 5 > 4 > 3, while the effect of concentration of substrate, precatalyst, and sodium formate on r_i, using 7 as an example, implicates [Cp∗Rh(bpy)(H)]⁺ formation as the rate-limiting step. The experimental kinetic rate expression was found to be: d[alcohol]/dt = k_cat[1][HCO₂Na]; substrate being pseudo zero order in water. The steric effects were also analyzed and appeared to be of less importance intra both the ketone and aldehyde series, but an inter series comparison appeared to show that the aldehydes had less of a steric effect on the initial rate, i.e., 7 > 4 by a factor of 3.6, while the aldehyde series appeared to have some moderate electronic influence on rates, presumably via electron donation to increase binding to the Cp∗Rh metal ion center, in accordance with these proposed concerted binding/hydride transfer reactions. A proposed catalytic cycle will also be presented.     

Quantum chemistry studies on the Ru-M interactions and the P NMR in [Ru(CO)3(Ph2Ppy)2(MCl2)] (M = Zn, Cd, Hg)

To study the Ru-M interactions and their effects on ³¹P NMR, complexes [Ru(CO)₃(Ph₂Ppy)₂] (py = pyridine) (1) and [Ru(CO)₃(Ph₂Ppy)₂MCl₂] (M = Zn, 2; Cd, 3; Hg, 4) were calculated by density functional theory (DFT) PBE0 method. Moreover, the PBE0-GIAO method was employed to calculate the ³¹P chemical shifts in complexes. The calculated ³¹P chemical shifts in 1-3 follow 2 > 3 > 1 which are consistent to experimental results, proving that PBE0-GIAO method adopted in this study is reasonable. This method is employed to predict the ³¹P chemical shift in designed complex 4. Compared with 1, the ³¹P chemical shifts in 2-4 vary resulting from adjacent Ru-M interactions. The Ru → M or Ru ← M charge-transfer interactions in 2-4 are revealed by second-order perturbation theory. The strength order of Ru → M interactions is the same as that of the P-Ru → M delocalization with Zn > Cd > Hg, which coincides with the order of ³¹P NMR chemical shifts. The interaction of Ru → M, corresponding to the delocalization from 4d orbital of Ru to s valence orbital of M²⁺, results in the delocalization of P-Ru → M, which decreases the electron density of P nucleus and causes the downfield ³¹P chemical shifts. Except 2, the back-donation effect of Ru ← M, arising from the delocalization from s valence orbital of M²⁺ to the valence orbital of Ru, is against the P-Ru → M delocalization and results in the upfield ³¹P chemical shifts in 4. Meanwhile, the binding energies indicate that complex 4 is stable and can be synthesized experimentally. However, as complex [Ru(CO)₃(Ph₂Ppy)₂HgCl]⁺5 is more stable than 4, the reaction of 1 with HgCl₂ only gave 5 experimentally.     

Syntheses,structures and electrochemistry of manganese(III) complexes derived from N,N′-o-phenylenebis(3-ethoxysalicylaldimine): Efficient catalyst for styrene epoxidation

Syntheses, characterizations, electrochemistry and catalytic properties for styrene epoxidation of three manganese(III) compounds [Mn^IIIL¹(H₂O)(MeOH)](ClO₄) (1) [Mn^IIIL¹(N₃)(H₂O)]·dmf (2) [Mn^IIIL¹(Cl)(H₂O)] (3) derived from the Schiff base compartmental ligand N,N′-o-phenylenebis(3-ethoxysalicylaldimine) (H₂L¹) are reported. The three compounds are characterized by elemental analyses, IR, mass and UV–Vis spectra and conductance values. Single crystal X-ray structures of 1 and 2 have been determined. The structures of 1 and 2 show that these are mononuclear compounds having a salen type structure. In both structures, a dinuclear species is formed by bifurcated hydrogen bonding involving coordinated water molecule. The coordination of chloride in 3 is shown by conductance measurements. The compounds have also been characterized by UV–Vis and mass spectroscopic studies. Cyclic voltammetric and square wave voltammetric studies of the three compounds reveal that these undergo Mn(III)/Mn(II) reduction reversibly with the order of the ease of reduction as 3 > 2 > 1. This order has been explained proposing the composition of active species in solution. Catalytic properties for epoxidation of styrene by all the three complexes using PhIO and NaOCl as oxidant have been studied. The order of both the styrene conversion and styrene epoxidation using the three title compounds is 3 > 1 > 2. Again, it has been observed that more efficient conversion and epoxidation take place when PhIO is used as oxidant.     

Cobalt complexes of terpyridine ligands: Crystal structure and nuclease activity

Cobalt(II) (1) and cobalt(III) (2) complexes of tridentate ligand, imidazole terpyridine (Itpy), have been synthesized and characterized by both spectroscopic and electrochemical techniques. Single crystal X-ray diffraction studies of complexes 1 and 2 shows that the complexes belong to monoclinic crystal system, with the two Itpy ligands coordinated to the central metal ion. The binding behavior of both the cobalt complexes to calf thymus DNA has been investigated by UV–Vis, fluorescence spectroscopy, viscosity and electrochemical measurements. The results suggest that complexes 1 and 2 bind to DNA through intercalation. The intrinsic DNA binding constant values obtained from absorption spectral titration studies were found to be (5.07 ± 0.12) × 10³ M⁻¹ and (7.46 ± 0.16) × 10³ M⁻¹, respectively, for complexes 1 and 2. Gel electrophoresis studies with the cobalt complexes show that while complex 1 cleaves DNA in the presence of hydrogen peroxide, complex 2 cleaves DNA in the presence of ascorbic acid and hydrogen peroxide.     

Synthesis of di-, tri-, tetra- and pentacyclic arene complexes of ruthenium(II):[Ru(η-polycyclic arene)-(1-5-η-cyclooctadienyl)]PF6 and their reactions with NaBH4

The phenanthrene complex of ruthenium(II), [Ru(η⁶-phenanthrene)(1,5-η⁵-cyclooctadienyl)]PF₆ (2c), is prepared by the reaction of Ru(η⁴-1,5-COD)(η⁶-1,3,5-COT) (1) with phenanthrene and HPF₆ in 65% yield. Similar treatments with di- tri-, tetra- and pentacyclic arenes give corresponding polycyclic arene complexes, [Ru(η⁶-polycyclic arene)(1-5-η⁵-cyclooctadienyl)]PF₆ [polycyclic arene = naphthalene (2b), anthracene (2d), triphenylene (2e), pyrene (2f) and perylene (2g)] in 46-90% yields. The molecular structure of the perylene complex 2g is characterized by X-ray crystallography. Reaction of 2c with NaBH₄ gives a mixture of the 1,5- and 1,4-COD complexes of ruthenium(0), Ru(η⁶-phenanthrene)(η⁴-1,5-COD) (3c) and Ru(η⁶-phenanthrene)(η⁴-1,4-COD) (4c) in 76% in 1:8 molar ratio. The arene exchange reactions among cationic complexes [Ru(η⁶-arene)(1-5-η⁵-cyclooctadienyl)]PF₆ (2) showed the coordination ability of arenes in the following order: benzene ∼ triphenylene > phenanthrene > naphthalene > perylene ∼ pyrene > anthracene, suggesting the benzo fused rings, particularly those of acenes, decreasing thermal stability of the arene complex.     

Effect of π-accepting substituent on the reactivity and spectroscopic characteristics of triarylbismuthanes and triarylbismuth dihalides

Competitive chlorination of p-substituted triarylbismuthanes 1 [(p-XC₆H₄)₃Bi; a: X = OMe, c: Cl, d: CO₂Et, e: CF₃, f: CN, g: NO₂] and trimesitylbismuthane (2,4,6-Me₃C₆H₂)₃Bi 1h by sulfuryl chloride was carried out against 1b (X = H) and the effect of these substituents on the formation of triarylbismuth dichlorides 2 was studied. The relative ratios 2/2b decreased with increasing electron-withdrawing ability of the substituents (2a/2b = 53/47, 2c/2b = 33/67, 2d/2b = 35/65, 2e/2b = 29/71, 2f/2b = 16/84, 2g/2b = 0/100, 2h/2b = 46/54), indicating a lowering of reactivity of the lone pair on the bismuth atom. Pd-Catalyzed degradation of 2a-g and their difluorides 3 giving biaryls 4 was promoted by the electron-withdrawing p-substituents in the equatorial aryl groups but suppressed by the more electronegative fluorine atoms in the apical positions. This is in fairly good accord with the stability of the trigonal bipyramidal geometry. The ¹³C NMR study of 1-3 showed that the signals due to the ipso carbons (C1) attached to the bismuth atom shift downfield with increasing electron-withdrawing nature of the p-substituents. No such tendency was observed in other aromatic ring carbons. The electronic effect on the C1 atoms, similar to that on the chlorination of 1 and degradation of 2 and 3, indicates the significant participation of the C1 atoms in these reactions through the Bi-C1 bonds.     

Iron(0) and ruthenium(0) complexes with tridentate phosphonite ligands and their potential for ketene formation from methyl iodide, CO and a base

An efficient route to the novel tridentate phosphine ligands RP[CH₂CH₂CH₂P(OR′)₂]₂ (I: R = Ph; R′ = i-Pr; II: R = Cy; R′ = i-Pr; III: R = Ph; R′ = Me and IV: R = Cy; R′ = Me) has been developed. The corresponding ruthenium and iron dicarbonyl complexes M(triphos)(CO)₂ (1: M = Ru; triphos = I; 2: M = Ru; triphos = II; 3: M = Ru; triphos = III; 4: M = Ru; triphos = IV; 5: M = Fe; triphos = I; 6: M = Fe; triphos = II; 7: M = Fe; triphos = III and 8: M = Fe; triphos = IV) have been prepared and fully characterized. The structures of 1, 3 and 5 have been established by X-ray diffraction studies. The oxidative addition of MeI to 1-8 produces a mixture of the corresponding isomeric octahedral cationic complexes mer,trans-(13a-20a) and mer,cis-[M(Me)(triphos)(CO)₂]I (13b-20b) (M = Ru, Fe; triphos = I-IV). The structures of 13a and 20a (as the tetraphenylborate salt (21)) have been verified by X-ray diffraction studies. The oxidative addition of other alkyl iodides (EtI, i-PrI and n-PrI) to 1-8 did not afford the corresponding alkyl metal complexes and rather the cationic octahedral iodo complexes mer,cis-[M(I)(triphos)(CO)₂]I (22-29) (M = Ru, Fe; triphos = I-IV) were produced. Complexes 22-29 could also be obtained by the addition of a stoichiometric amount of I₂ to 1-8. The structure of 22 has been verified by an X-ray diffraction study. Reaction of 13a/b-20a/b with CO afforded the acetyl complexes mer,trans-[M(COMe)(triphos)(CO)₂]I, 30-37, respectively (M = Ru, Fe; triphos = I-IV). The ruthenium acetyl complexes 30-33 reacted slowly with 2-tert-butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine (BEMP) even in boiling acetonitrile. Under the same conditions, the deprotonation reactions of the iron acetyl complexes 34-37 were completed within 24-40 h to afford the corresponding zero valent complexes 5-8. It was not possible to observe the intermediate ketene complexes. Tracing of the released ketene was attempted by deprotonation studies on the labelled species mer,trans-[Fe(COCD₃)(triphos)(CO)₂]I (38) and mer,trans-[Fe(¹³COMe)(triphos)(CO)₂]I (39).     

Oxidative and hydrolytic DNA cleavage by Cu(II) complexes of salicylidene tyrosine schiff base and 1,10 phenanthroline/bipyridine

Ternary Cu(II) complexes [Cu(II)(saltyr)(B)] (1,2), (saltyr = salicylidene tyrosine, B = 1,10 phenanthroline (1) or 2,2′ bipyridine (2)) were synthesized and characterized by various techniques. The complexes exhibit square pyramidal (CuN₃O₂) geometry. CT-DNA binding studies revealed that the complexes show good binding propensity (K_b = 3.47 × 10⁴ M⁻¹ and 3.01 × 10⁴ M⁻¹ for 1 and 2, respectively). The role of these complexes in the oxidative and hydrolytic DNA cleavage was studied. The catalytic ability of 1 and 2 follows the order: 1 > 2. The rate constants for the hydrolysis of phosphodiester bond were determined as 2.80 h⁻¹ and 2.11 h⁻¹ for 1 and 2, respectively. It amounts to (0.58-0.77) × 10⁸ fold rate enhancement compared to non-catalyzed DNA cleavage, which is significant.     

Metal-directed supramolecular assembly of metal(II) benzoates (M = Co,Ni, Cu,Zn, Mn,and Cd) with 4,4′-bipyridine: Effects of metal coordination modes and novel catalytic activities

Six polymeric metal(II)-benzoate complexes of formula [Co₂(O₂CPh)₄(4,4′-bpy)₂]_n (1-Co), [Ni(O₂CPh)₄(H₂O)₂(4,4′-bpy)]_n (2-Ni), [Cu₂(O₂CPh)₄(4,4′-bpy)]_n (3-Cu), [Zn₂(O₂CPh)₂(OH)₂(4,4′-bpy)₂]_n (4-Zn), [Zn₃(O₂CPh)₄(μ-OH)₂(4,4′-bpy)₂]_n (5-Zn), and [Cd₂(O₂CPh)₄(4,4′-bpy)₂]_n (6-Cd) have been synthesized and characterized (4,4′-bpy = 4,4′-bipyridine). 1-Co and 6-Cd show ladder-type double chains, 2-Ni does a helical structure, 3-Cu does a one-dimensional chain containing paddle-wheel units, 4-Zn does a zigzag chain, and 5-Zn does two-dimensional sheets. Since different structures provide different coordination geometry of each metal ion, it is clear that selection of appropriate metal ions can control the coordination geometry of each metal ion to form different crystal structures. Reactivity study of the compounds 1–7 for the transesterification of a variety of esters has shown that 4-Zn and 5-Zn are very efficient and the best among them. The catalyst 6-Cd containing Cd ion, well known as an inert metal ion for the ligand substitution, also catalyzed efficiently the transesterification of a variety of esters, and its reactivity is comparable to 4-Zn and 5-Zn. Moreover, the redox-active metal-containing polymers, 1-Co, 3-Cu, and 7-Mn, have shown efficient catalytic reactivities for the transesterification reactions, while 2-Ni has displayed a very slow conversion. The reactivities of the compounds used in this study are in the order of 5-Zn > 4-Zn > 6-Cd > 7-Mn ∼ 3-Cu > 1-Co > 2-Ni, indicating that the non-redox metal-containing compounds (5-Zn, 4-Zn, and 6-Cd) show better activity than the redox-active metal-containing compounds (7-Mn, 3-Cu, 1-Co, and 2-Ni). These results suggest that it is possible to tune the catalytic activities by changing from Zn to those metals such as Cd, a kinetically inert metal, or Cu, Mn, and Co, the redox-active metals.     

Three different fluorescent responses to transition metal ions using receptors based on 1,2-bis- and 1,2,4,5-tetrakis-(8-hydroxyquinolinoxymethyl)benzene

The dipod 1,2-bis(8-hydroxyquinolinoxymethyl)benzene (3) and tetrapod 1,2,4,5-tetrakis(8-hydroxyquinolinoxymethyl)benzene (5) have been synthesized through nucleophilic substitution of respective 1,2-bis(bromomethyl)benzene (2) and 1,2,4,5-tetra(bromomethyl)benzene (4) with 8-hydroxyquinoline (1). For comparison, 1,3,5-tris(8-hydroxyquinolinoxymethyl)benzene derivatives (7a and 7b) have been obtained. The complexation behavior of these podands towards Ag⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, and Cd²⁺ metal ions has been investigated in acetonitrile by fluorescence spectroscopy. The sterically crowded 1,2,4,5-tetrapod 5 displays unique fluorescence ‘ON-OFF-ON’ switching through fluorescence quenching (λ_max 395 nm, switch OFF) with <1.0 equiv of Ag⁺ and fluorescence enhancement (λ_max 495 nm, switch ON) with >3 equiv Ag⁺ and can be used for estimation of two different concentrations of Ag⁺ at two different wavelengths. The addition of Cu²⁺, Ni²⁺, and Co²⁺ metal ions to tetrapod 5 causes fluorescence quenching, i.e., ‘ON-OFF’ phenomena at λ_max 395 nm for <10 μM (1 equiv) of these ions but addition of Zn²⁺ and Cd²⁺ to tetrapod 5 results in fluorescence enhancement with a gradual shift of λ_em from 395 to 432 and 418 nm, respectively. Similarly, dipod 3 behaves as an ‘ON-OFF-ON’ switch with Ag⁺, an ‘ON-OFF’ switch with Cu²⁺, and an ‘OFF-ON’ switch with Zn²⁺. The placement of quinolinoxymethyl groups at the 1,3,5-positions of benzene ring in tripod 7a-b leads to simultaneous fluorescence quenching at λ_max 380 nm and enhancement at λ_max 490 nm with both Ag⁺ and Cu²⁺. This behavior is in parallel with 8-methoxyquinoline 8. The rationalization of these results in terms of metal ion coordination and protonation of podands shows that 1,2 placement of quinoline units in tetrapod 5 and dipod 3 causes three different fluorescent responses, i.e., ‘ON-OFF-ON’, ‘ON-OFF’, and ‘OFF-ON’ due to metal ion coordination of different transition metal ions and 1, 3, and 5 placement of three quinolines in tripod 7, the protonation of quinolines is preferred over metal ion coordination. In general, the greater number of quinoline units coordinated per metal ion in 5 compared with the other podands points to organization of the four quinoline moieties around metal ions in the case of 5.