4-溴-5-甲基靛红的Baeyer-Villiger氧化反应

Baeyer-Viliger反应是由酮制备酯的重要方法^[1].氧化剂通常有两类:(1)有机过酸;(2)过硫酸钾/硫酸(Caro酸).由于靛红结构特殊,我们分别以单过邻苯二甲酸^[2]和过硫酸钾/硫酸^[3]为氧化剂氧化4-溴-5-甲基靛红(1).     

4-甲酰基4-苯乙烯基吡啶分子聚集行为的光谱研究

苯乙烯基吡啶化合物,由于它可能在医学方面^[1]和光电子功能材料^[2]方面有实际应用前景,已引起人们的兴趣。苯乙烯吡啶化合物的光化学性质类似于二苯乙烯化合物,在光照下可以发生顺-反异构反应^[3]、加成反应和二聚反应^[4]等不同的光化学反应。     

meso-四-(3-N-甲基吡啶)卟啉与钴反应的分光光度研究

水溶性卟啉衍生物作为光度试剂在分析化学中已得到广泛的应用。在测定某些过渡金属元素时具有极高的灵敏度(ε值为2-5×10⁵)^[1]。meso-四-(3-N-甲基吡啶)卟啉[T(3-MPy)P]与铜^[2]、锌^[3]、铅^[4]的反应都已进行研究。本文对T(3-MPy)P与钴的反应进行了初步的研究。T(3-MPy)P的结构如右图。     

吸收液采样-高效液相色谱法测定室内空气中甲醛的含量

<正>甲醛是一种无色有刺激性气味的气体，被世界卫生组织(WHO)定为致畸和致癌的物质之一^[1]。我国规定室内空气甲醛的限值为0.10 mg·m-3^[2]。目前监测环境中甲醛的国家标准测定方法很多^[3],常用的有4-氨基-3-联氨-5-巯基-1,2,4-三氮杂茂(Ⅰ)(AHMT)分光光度法^[4]、3-甲基-2-苯并噻唑啉酮腙盐酸盐水合物(MBTH)酚试剂分光光度法^[5]、乙酰丙酮分光光度法^[6]、气相色谱法(GC)^[7]、     

1,1-二氯-4,8-二甲基-1,3,7-壬二烯的酸催化环化反应

在多烯的酸催化环化反应中,类似于Ⅰ的结构的单萜类衍生物的酸催化环化产物通常均为α-和β-异构体的混合物,如由柠檬酸制备环柠檬醛^[1],由伪紫罗兰酮制备紫罗兰酮^[2],…….虽然依具体反应条件的不同,两种异构体的比例可以有所改变,但欲得到无双键异构的单一产物往往比较困难.     

含氮烃基膦酸的合成(Ⅳ)——以环丁砜作溶剂直接合成N-烃基-α-氨基苄基膦酸

具有生物活性的 α-氨基烃基膦酸的合成有过报道^[1], 而氮烃基-α-氨基烃基膦酸的合成报道较少. 应用醛、苄胺与亚磷酸酯反应后在强酸条件下水解得到取代的 α-氨基烃基膦酸^{[2, 3]}.IssIeib用三甲基硅基膦酸与席夫碱加成然后再水解^[4]. 这些方法尽管得到相应的膦酸产物,但它的水解却需要较长时间。     

α-甲氧基萘的电子转移光氧化反应

近年来芳烃和杂环化合物的电子转移光氧化反应受到日益的注意^[1-5]。电子转移光氧化反应不仅可应用于很多对¹O₂为惰性的烯烃和芳烃^[1-7],而且对某些¹O₂活性化合物,也可给出与¹O₂反应不同的产物。     

α-氨基酸及其酯化物侧链对其β-环糊精复合物稳定常数的影响

为了探索α-氨基酸及其酯化物的侧链R基团对其与环糊精非共价复合物结合强度的影响, 将一定摩尔比的β-环糊精(β-CD)分别与L型正缬氨酸(n-Val)、 亮氨酸(Leu)、 苯丙氨酸(Phe)、 天冬氨酸(Asp)、 天冬氨酸-4-苄酯(Asp-4-benzyl ester)和天冬氨酸-4-叔丁酯(Asp-4-t-butyl ester)在室温下混合, 反应平衡后采用电喷雾电离质谱进行竞争反应检测, 并以改进的质谱滴定结合曲线拟合法计算结合常数. 结果表明, 它们均可形成摩尔比为1∶1的非共价复合物. 在2组竞争反应中, 复合物的结合强度顺序分别为[β-CD∶Asp-4-benzyl ester+H]⁺>[β-CD∶Asp-4-t-butyl ester+H]⁺>[β-CD∶Asp+H]⁺以及[β-CD∶Phe+H]⁺>[β-CD∶Leu+H]⁺>[β-CD∶n-Val+H]⁺. 质谱滴定曲线拟合法测得[β-CD∶n-Val+H]⁺, [β-CD∶Asp+H]⁺, [β-CD∶Asp-4-t-butyl ester+H]⁺, [β-CD∶Asp-4-benzyl ester+H]⁺, [β-CD∶Leu+H]⁺和[β-CD∶Phe+H]⁺的稳定常数(lgK_st)分别为1.81, 2.54, 3.14, 3.26, 3.36和3.67, 结合强度依次增强. 竞争反应的定性分析结果与质谱滴定定量法测得结合强度结果的趋势一致. 由于所选用的α-氨基酸及其酯化物客体的羧基端(—COOH)和氨基端(—NH₂)均相同, 且都为亲水基团, 仅有侧链R基团不同, 因此在溶液中客体分子受疏水驱动与β-CD主体靠近并结合时, 侧链R基团的疏水力和极性2个因素起重要作用. 由于客体分子体积小, 其碳端的羧基还可与β-CD大口或小口边缘的羟基形成氢键, 使复合物更加稳定.     

利用汞(Ⅱ)-四(4-三甲铵苯基)卟啉的显色反应间接分光光度法测定微量硫化物

微量硫化物的测定国内外常采用亚甲基蓝法、分子荧光法、电极法、原子吸收分光光度法^[1]和冷原子荧光法^[2]等.汞(Ⅱ)可与四(4-三甲铵苯基)卟啉(简称TAPP)在室温下产生灵敏的显色反应(ε=2。85×10⁵),并允许大量常见阴离子存在^[3],但当S^2-存在时,则极易抑制与其相当量的Hg(Ⅱ)-TAPP配合物的生成,根据这一原理,本文提出了利用,Hg(Ⅱ)-TAPP的显色反应间接分光光度法测定微量硫化物的新方法.     

固相萃取-液相色谱-串联质谱法测定环境水体中三氯生的残留量

<正>三氯生是一种羟二乙醚的三氯化衍生物^[1],具有广谱杀菌,化学性质稳定,难挥发等特点,被广泛用于日化产品中^[2]。相应地,环境中三氯生残留问题越来越多地被报道出来^[3-5],特别是在水体环境中^[6-8]。三氯生对水体中各类生物均具有一定的毒性,影响水生生物在水体中的存活数量和形态^[9-10]。但是,目前缺乏水体中三氯生限量规定的法规和标准,因此水体中三氯生残留量的测定成为了相关人员的研究热点。     

A conjugate addition/dipolar-cycloaddition cascade sequence for the synthesis of (±)-cylindricine C

An efficient stereocontrolled route to (±)-cylindricine C is described. Reaction of 9-hydroxynon-1-en-5-one oxime with 2,3-bis(phenylsulfonyl)-1,3-butadiene affords a 7-oxa-1-azanorbornane cycloadduct in high yield. The formation of the bicyclic isoxazolidine arises from conjugate addition of the oxime onto the diene to give a transient nitrone that spontaneously undergoes an intramolecular dipolar cycloaddition. The resulting cycloadduct derived from the cascade sequence was converted into (±)-cylindricine C by: (1) a reductive-cyclization to set the BC-ring skeleton, (2) a base-induced cyclization to construct the tricyclic core, and (3) an oxidation-conjugate addition of the n-hexyl side chain to complete the synthesis.     

Stereo- and regioselectivity of Pd(0)/InI-mediated allylic additions to aldehydes and ketones. In situ generation of allylindium(III) intermediates from N-acylnitroso Diels-Alder cycloadducts and 1-amino-4-acetoxycyclopentenes

Acylnitroso Diels-Alder cycloadduct (11, 37, and 45)- and cyclopentenyl acetate (8 and 9)-derived allylindium(III) species were generated in situ from palladium(0) catalysts and indium(I) iodide, and the stereo- and regiochemistry of their additions to aldehydes and ketones were investigated. Solvent, catalyst, and ionic effects were examined for the reaction of N-acetyl cycloadduct (11) and benzyloxyacetaldehyde (10). The solvent mixture of THF/H(2)O with Pd(OAc)(2).PPh(3) catalysis was found to be optimal. The addition of N-acetyl cycloadduct to aliphatic aldehydes afforded products in good yields and high regio- and stereoselectivity, with the cis-1,4-isomers constituting 90-95% of the products. The reactions with N-Boc (37a) and N-methylcarbamate (37b) cycloadducts also gave the cis-1,4-products predominantly. The same regio- and stereoselectivity applied to the reactions of 4-acetoxy-1-(N-hydroxyphenyacetamido)cyclopentene (8). 4-Acetoxy-1-phenylacetamidocyclopentene (9), however, afforded trans-1,4-products exclusively. Mechanistic speculations involving chelated transition states are described.     

Spontaneous polymerization of the nitroethylene–isobutyl vinyl ether system

Initiation and propagation mechanisms of the spontaneous polymerization of the system nitroethylene–isobutyl vinyl ether were studied. An equimolar mixture of these two monomers gives white precipitates below room temperature, though they react explosively to give viscous products at higher temperature. The precipitate was found to be composed of a polynitroethylene and a cycloadduct of these two monomers. The isolated cycloadduct product is so reactive that it not only polymerizes itself spontaneously but also initiates the polymerization of nitroethylene. The polymerization of the cycloadduct was revealed to proceed without termination to produce an alternate copolymer of these two monomers. These results indicate that the explosive spontaneous polymerization of this system consists of three elementary reaction processes; (1) cycloaddition reaction between two monomers, (2) anionic polymerization of nitroethylene induced by the cycloadduct, and (3) the living ring-opening polymerization of the cyclo-adduct.     

Carboxylic acid clathrate hosts of Diels-Alder adducts of phencyclone and 2-alkenoic acids. Role of bidentate C-H ... O hydrogen bonds between the phenanthrene and carbonyl groups in host-host networks

Carboxylic acid host compounds (3) having a phenanthrene-condensed bicyclo[2.2.1]hept-2-en-7-one skeleton have been synthesized by the [4 + 2]pi cycloaddition of phencyclone (1a) with 2-alkenoic acids (2) and their inclusion behavior was investigated. The endo [4 + 2]pi cycloadducts (3) enclathrated alcohols and ethers besides aromatics and ketones. The X-ray crystallographic analysis of the inclusion compound (3ac-dioxane) of the endo [4 + 2]pi cycloadduct (3ac) of phencyclone and trans 2-butenoic acid (2c) indicated that dioxanes are located at the opposite side of the bridged carbonyl of the bicyclo[2.2.1]hept-2-en-7-one moiety, in which the O-H...O and C-H...O hydrogen bonds play an important role in the inclusion complex formation. Similarly, a pair of 3-pentanone molecules were included in the endo [4 + 2] pi cycloadduct (3ae) of 1a and cinnamic acid (2e). In both cases, the hosts are linked by the edge-to-face interaction between the phenanthrene and phenyl rings and the "bidentate" C-H...O hydrogen bonds between the phenanthrene-ring hydrogens and the bridged carbonyl or the carboxylic carbonyl group. The endo [4 + 2] pi cycloadduct (3bl) of tetracyclone (1b) and acrylamide (2l) also showed a wide-range inclusion behavior, in which alcohols are included by making a hydrogen-bond loop with the amide groups. The inclusion behavior of the carboxylic acid Diels-Alder hosts is discussed on the basis of the single crystal X-ray analysis, thermal analysis and semiempirical molecular orbital calculation data.     

Density functional theory and atoms-in-molecule study on the role of two-electron stabilizing interactions in retro Diels-Alder reaction of cycloadducts derived from substituted cyclopentadiene and p-benzoquinone

A systematic investigation on the cycloreversion reaction of the cycloadduct formed between substituted cyclopentadiene and p-benzoquinone (1-19) is reported at the B3LYP/6-311+G**//B3LYP/6-31G* level of theory. The computed activation barrier exhibits a fairly high sensitivity to the nature of substituents at the C7-position. Gibbs free energy of activation for 1 and 19 are found to be 20.3 and 30.1 kcal mol(-1), respectively, compared to 7, which is estimated to be 24.7 kcal mol(-1). Quantitative analysis of the electronic effects operating in both the cycloadduct as well as the corresponding transition state for the retro Diels-Alder (rDA) reaction performed using the natural bond orbital (NBO) and atoms in molecule (AIM) methods have identified important two-electron stabilizing interactions. Among four major delocalizations, sigma(C7-X) to sigma*(C1-C5) [and to sigma*(C2-C6)] is identified as the key contributing factor responsible for ground state C1-C5 bond elongation, which in turn is found to be crucial in promoting the rDA reaction. A good correlation between the population of antibonding orbital [sigma*(C1-C5)] of the ground state cycloadduct and Gibbs free energy of activation is observed. The importance of factors that modulate ground state structural features in controlling the energetics of rDA reaction is described.     

Application of Benzoyl-substituted Hemithioindigo as a Molecular Switch in Porphyrin-Quinone Recognition

The benzoyl-substituted hemithioindigo 1 with Z-configuration was obtained as the sole product from the reaction of 7-ethylbenzo[b]thiophen-3(2H)-one with phenylglyoxal. Irradiation of 1 produced the [2+4] cycloadduct 2, instead of the usual Z ? E isomerization product. The cycloadduct 2 is completely dissociated back to 1 on heating; the interconversion between 1 and 2 shows good repeatability. This reversible property is applied to the molecular switch in the hydrogen-bonded quinone recognition of the 5,15-cis-bis(ureidophenyl)porphyrin 3. resulting in the release of     

On the 1,3-dipolar cycloaddition reactions of indenone with N-N-C dipoles: density functional theory calculations

Density functional theory (DFT) calculations at the B3LYP/6-311G* theoretical level have been performed to study the 1,3-dipolar cycloaddition (1,3-DC) reactions between indenone (1) and different 1,3-dipoles (diazomethane and N-methyl C-methoxy carbonyl nitrilimine, compounds 2 and 3, respectively). The geometrical and energetic properties were analysed for the different reactives, transition states and cycloadducts formed (compounds 4-11). The reactions proceed in the gas-phase by an asynchronous concerted mechanism, yielding different regiochemistry dependent on the 1,3-dipole chosen, although with dipole 3 some degree of synchrony was found in the formation of cycloadduct 5. The 1,3-DC between 1 and 3 was regioselective, being the cycloadduct 11 favoured against 9. The NMR chemical shift parameters (GIAO method) were also calculated for the reactives and cycloadducts.     

Peri-selective photocycloadditions of methyl 2-pyrone-5-carboxylate with unsaturated cyclic ethers

Photosensitized cycloaddition reaction of methyl 2-pyrone-5-carboxylate ( 1 ) with 2,3-dihydrofuran gave cis- exo- and cis-endo-[2 + 2] cycloadducts across the C₃-C₄ double bond in 1 , and a [4 + 2] cycloadduct which was different in addition-orientation from the Diels-Alder adducts. Each [2 + 2] cycloadduct was obtained by the use of sensitizers having different triplet energies. Photosensitized reactions of 1 with 3,4-dihydro-2H-pyrans afforded cis-endo-[2 + 2] cycloadducts, respectively. The photocycloaddition mechanism was also explained from the excited state of 1 calculated by means of MNDO-Cl method.     

Selectivity in cycloadditions: Crystal and molecular structure of (1a,4β,5a)-1,5-diacetyl-4-hydroxy-4-methylbicyclo[3.1.0]Hexan-2-one

The stereochemistry of (1a,4β,5a)-1,5-diacetyl-4-hydroxy-4-methylbicyclo[3.1.0]hexan-2-one, the main cycloadduct of 2,3-diacetyl-4-hydroxy-4-methylcyclopent-2-en-1-one and diazomethane, was unambiguously established from a single crystal X-ray analysis.     

Cycloarsanes (AsCF3)n (n = 4, 5) – Precursors for the Highly Reactive Diarsene F3CAs=AsCF3

Tetrakis(trifluoromethyl) cyclotetraarsane (F₃CAs)₄ ( 2 ) was used to repeat the UV initiated [4+2]‐cycloaddition reaction of the diarsene F₃CAs=AsCF₃ ( 1 ) with cyclohexa‐1,3‐diene (CHD) and to isolate single crystals of the cycloadduct 4 for a X‐ray diffraction analysis. 4 crystallizes in the space group and contains the diarsene group in its E‐configuration. 2 was also applied for [2+2]‐cycloaddition reactions of 1 with tBuC≡P and MeC≡CNⁱPr₂, but in contrast to positive results with (F₃CP)₄ the products were too labile for isolation. However, 2 was successfully used at room temperature as precursor for coordinating 1 as π‐donor ligand to the Pd(PPh₃)₂ complex fragment yielding η²‐bis(trifluoromethyl)diarsene‐bis(triphenylphosphane)‐palladium(0) 5 , which was characterized by X‐ray diffraction of single crystals and by spectroscopic investigations (NMR, IR, MS). Attempts to prove the existence of the diarsene 1 , generated by different methods, by spectroscopic studies very probably failed due to its extreme reactivity, not allowing the necessary concentrations for detection. Quantum chemical calculations of the stability of 1 with respect to dimerization, the stability of the [2+2]‐cycloadduct with 1‐di(isopropyl)aminopropyne and the energy difference between 4 and the 2,3‐dimethyl‐1,3‐butadiene cycloadduct of 1 were performed to understand the considerable differences between 1 and the related diphosphene F₃CP=PCF₃.