Patterned polymer brushes

This critical review summarizes recent developments in the fabrication of patterned polymer brushes. As top-down lithography reaches the length scale of a single macromolecule, the combination with the bottom-up synthesis of polymer brushes by surface-initiated polymerization becomes one main avenue to design new materials for nanotechnology. Recent developments in surface-initiated polymerizations are highlighted along with diverse strategies to create patterned polymer brushes on all length scales based on irradiation (photo- and interference lithography, electron-beam lithography), mechanical contact (scanning probe lithography, soft lithography, nanoimprinting lithography) and on surface forces (capillary force lithography, colloidal lithography, Langmuir-Blodgett lithography) (116 references).     

Facile fabrication of microfluidic systems using electron beam lithography

We present two fast and generic methods for the fabrication of polymeric microfluidic systems using electron beam lithography: one that employs spatially varying electron-beam energy to expose to different depths a negative electron-beam resist, and another that employs a spatially varying electron-beam dose to differentially expose a bi-layer resist structure. Using these methods, we demonstrate the fabrication of various microfluidic unit structures such as microchannels of a range of geometries and also other more complex structures such as a synthetic gel and a chaotic mixer. These are made without using any separate bonding or sacrificial layer patterning and etching steps. The schemes are inherently simple and scalable, afford high resolution without compromising on speed and allow post CMOS fabrication of microfluidics. We expect them to prove very useful for the rapid prototyping of complete integrated micro/nanofluidic systems with sense and control electronics fabricated by upstream processes.     

Electrochemical Characterization of Vertically Aligned Carbon Nanofiber Arrays Prepared by Hole‐mask Colloidal Lithography

Nanoelectrode arrays consisting of vertically aligned carbon nanofibers were prepared through plasma enhanced chemical vapor deposition and patterned using hole‐mask colloidal lithography (HCL), a simple fabrication method employed as a cost‐effective patterning alternative to the conventional electron beam lithography. The density of the carbon nanofibers was easily altered by changing the concentration of the polystyrene spheres employed in HCL. Cyclic voltammetry and chronoamperometry were used to electrochemically characterize the arrays of different density. Results indicate that the density of the carbon nanofibers leads to differences in the macro/micro electroactive surface areas.     

Assembly of tobacco mosaic virus into fibrous and macroscopic bundled arrays mediated by surface aniline polymerization

One-dimensional (1D) polyaniline/tobacco mosaic virus (TMV) composite nanofibers and macroscopic bundles of such fibers were generated via a self-assembly process of TMV assisted by in-situ polymerization of polyaniline on the surface of TMV. At near-neutral reaction pH, branched polyaniline formed on the surface of TMV preventing lateral association. Therefore, long 1D nanofibers were observed with high aspect ratios and excellent processibility. At a lower pH, transmission electron microscopy (TEM) analysis revealed that initially long nanofibers were formed which resulted in bundled structures upon long-time reaction, presumably mediated by the hydrophobic interaction because of the polyaniline on the surface of TMV. In-situ time-resolved small-angle X-ray scattering study of TMV at different reaction conditions supported this mechanism. This novel strategy to assemble TMV into 1D and 3D supramolecular composites could be utilized in the fabrication of advanced materials for potential applications including electronics, optics, sensing, and biomedical engineering.     

Nanofabrication of electrode arrays by electron-beam and nanoimprint lithographies

The fabrication of ordered nanoelectrode arrays using both electron-beam lithography and nanoimprint lithography is described. Arrays of nanoelectrodes with varying individual electrode diameters were produced and characterised electrochemically. Whilst both methods are highly reproducibile, nanoimprint lithography has the potential to produce devices rapidly and at low-cost. To our knowledge, this is the first report where nanoimprint lithography is employed for the production of nanoelectrode arrays for electroanalytical sensors.     

Hydroxyl-functionalized polyaniline nanospheres: tracing molecular interactions at the nanosurface via vitamin C sensing

Here, we report a synthesis of novel polyaniline nanospheres bearing mono- and bishydroxyl functional groups to trace the molecular interactions at the nanosurfaces through vitamin C sensing. Two new aniline monomers were synthesized via a tailor-made approach and polymerized to produce soluble and uniform polyaniline nanospheres. The structures of the monomers and polymers were characterized by NMR, FT-IR, and MS techniques, and the morphology of the nanomaterials was analyzed by SEM and TEM. The mechanistic aspects of the nanomaterial formations were analyzed by FT-IR and dynamic light scattering techniques. These studies revealed that the hydroxyl-functionalized monomers have strong hydrogen bonding at the monomer level and form spherical aggregates in water, which are templates for the polyaniline nanospheres 600 +/- 100 nm in size. A controlled synthesis was also carried out using aniline hydrochloride as an unsubstituted counterpart, which yields polyaniline nanofibers. WXRD analysis confirmed the presence of a sharp peak at lower angle at 2theta = 7.3 degrees ( d-spacing of 13.4 A) in hydroxyl-substituted nanospheres with respect to enhancement of solid-state ordered crystalline domains, whereas unsubstituted nanofibers were found to be highly amorphous. Vitamin C was employed as an analyte to trace the molecular interaction at the nanosphere surface and study the influence of nanosurface functionalization on the sensing ability of biomolecules. The bishydroxyl-functionalized polyaniline nanospheres were found to show efficient molecular interactions toward vitamin C, whereas nanospheres with a monohydroxyl group or unsubstituted nanofibers failed as sensing materials. In a nut shell, in the present investigation, for the first time, we have proved the importance of surface functionalization of polyaniline nanomaterial, exclusively nanospheres, using hydroxyl groups for studying the molecular interactions at the nanosurfaces with biomolecules such as vitamin C.     

Optimized Liquid-Phase Exfoliation of Magnetic van der Waals Heterostructures: Towards the Single Layer and Deterministic Fabrication of Devices

Van der Waals magnetic materials are promising candidates for spintronics and testbeds for exotic magnetic phenomena in low dimensions. The two-dimensional (2D) limit in these materials is typically reached by mechanically breaking the van der Waals interactions between layers. Alternative approaches to producing large amounts of flakes rely on wet methods such as liquid-phase exfoliation (LPE). Here, we report an optimized route for obtaining monolayers of magnetic cylindrite by LPE. We show that the selection of exfoliation times is the determining factor in producing a statistically significant amount of monolayers while keeping relatively big flake areas (~1 µm²). We show that the cylindrite lattice is preserved in the flakes after LPE. To study the electron transport properties, we have fabricated field-effect transistors based on LPE cylindrite. Flakes are deterministically positioned between nanoscale electrodes by dielectrophoresis. We show that dielectrophoresis can selectively move the larger flakes into the devices. Cylindrite nanoscale flakes present a p-doped semiconducting behaviour, in agreement with the mechanically exfoliated counterparts. Alternating current (AC) admittance spectroscopy sheds light on the role played by potential barriers between different flakes in terms of electron transport properties. The present large-scale exfoliation and device fabrication strategy can be extrapolated to other families of magnetic materials.     

New renewable resource amphiphilic molecular design for size-controlled and highly ordered polyaniline nanofibers

We demonstrate here, for the first time, a unique strategy for conducting polyaniline nanofibers based on renewable resources. Naturally available cardanol, which is an industrial waste and main pollutant from the cashew nut industry, is utilized for producing well-defined polyaniline nanofibers. A new amphiphilic molecule is designed and developed from cardanol, which forms a stable emulsion with aniline for a wide composition range in water (1:1 to 1:100 dopant/aniline mole ratio) to produce polyaniline nanofibers. The scanning electron microscopy and transmission electron microscopy analysis of the nanofibers reveals that the dopant/aniline ratio plays a major role in determining the shape and size of polyaniline nanofibers. The nanofiber length increases with the increase in the dopant/aniline ratio, and perfectly linear, well-defined nanofibers of lengths as long as 7-8 muM were produced. The amphiphilic dopant has a built-in head-to-tail geometry and effectively penetrates into the polyaniline chains to form highly organized nanofibers. Wide-angle X-ray diffraction (WXRD) spectra of the nanofibers showed a new peak at 2theta = 6.3 (d spacing = 13.9 A) corresponding to the three-dimensional solid-state ordering of polyaniline-dopant chains, and this peak intensity increases with increase in the nanofiber length. The comparison of morphology and WXRD reveals that high ordering in polyaniline chains results in the formation of long, well-defined nanofibers, and this direct correlation for the polyaniline nanofibers with solid-state ordering has been established. The conductivity of the polyaniline nanofibers also increases with increase in the solid-state ordering rather than increasing with the extent of doping. The polyaniline nanofibers are freely soluble in water and possess high environmental and thermal stability up to 300 degrees C for various applications.     

Self‐assembled anionic micellar template for polypyrrole,polyaniline, and their random copolymer nanomaterials

We report an anionic surfactant approach for size and shape control in polyaniline, polypyrrole, and their polyaniline‐co‐polypyrrole random copolymer nanomaterials. A renewable resource azobenzenesulfonic acid anionic surfactant was developed for template‐assisted synthesis of these classes of nanomaterials. The surfactant exists as 4.3 nm micelle in water and self‐organizes with pyrrole to produce spherical aggregates. The sizes of the spherical aggregates were controlled by water dilution and subsequent oxidation of these templates, produced polypyrrole nanospheres of 0.5 μM to 50 nm dimensions. The anionic surfactant interacts differently with aniline and forms cylindrical aggregates, which exclusively produce nanofibers of ∼180 nm in diameter with length up to 3–5 μM. The template selectivity of surfactant toward aniline and pyrrole was used to tune the nanostructure of the aniline‐pyrrole random copolymers from nanofiber‐to‐nanorod‐to‐nanospheres. Dynamic light scattering technique and electron microscopes were used to study the mechanistic aspects of the template‐assisted polymerization. The four probe conductivity of the copolymers showed a nonlinear trend and the conductivity passes through minimum at 60–80% of pyrrole in the feed. The amphiphilic dopant effectively penetrates into the crystal lattices of the polymer chain and induces high solid state ordering in the homopolymer nanomaterials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 830–846, 2009     

Nanostructured polyaniline sensors

The conjugated polymer polyaniline is a promising material for sensors, since its conductivity is highly sensitive to chemical vapors. Nanofibers of polyaniline are found to have superior performance relative to conventional materials due to their much greater exposed surface area. A template-free chemical synthesis is described that produces uniform polyaniline nanofibers with diameters below 100 nm. The interfacial polymerization can be readily scaled to make gram quantities. Resistive-type sensors made from undoped or doped polyaniline nanofibers outperform conventional polyaniline on exposure to acid or base vapors, respectively. The nanofibers show essentially no thickness dependence to their sensitivity.     

Dielectrophoretic trapping of single bacteria at carbon nanofiber nanoelectrode arrays

We present an ac dielectrophoretic (DEP) technique for single-cell trapping using embedded carbon nanofiber (CNF) nanoelectrode arrays (NEAs). NEAs fabricated by inlaying vertically aligned carbon nanofibers in SiO2 matrix are applied as "points-and-lid" DEP devices in aqueous solution. The miniaturization of the electrode size provides a highly focused electrical field with the gradient enhanced by orders of magnitude. This generates extremely large positive DEP forces near the electrode surface and traps small bioparticles against strong hydrodynamic forces. This technology promises new capabilities to perform novel cell biology experiments at the nanoscale. We anticipate that the bottom-up approach of such nano-DEP devices allows the integration of millions of nanolectrodes deterministically in lab-on-a-chip devices and will be generally useful for manipulating submicron particles.     

A Self‐Digitization Dielectrophoretic (SD‐DEP) Chip for High‐Efficiency Single‐Cell Capture,On‐Demand Compartmentalization,and Downstream Nucleic Acid Analysis

The design and fabrication of a self‐digitization dielectrophoretic (SD‐DEP) chip with simple components for single‐cell manipulation and downstream nucleic acid analysis is presented. The device employed the traditional DEP and insulator DEP to create the local electric field that is tailored to approximately the size of single cells, enabling highly efficient single‐cell capture. The multistep procedures of cell manipulation, compartmentalization, lysis, and analysis were performed in the integrated microdevice, consuming minimal reagents, minimizing contamination, decreasing lysate dilution, and increasing assay sensitivity. The platform developed here could be a promising and powerful tool in single‐cell research for precise medicine.     

Advances in top-down and bottom-up surface nanofabrication: techniques, applications & future prospects

This review highlights the most significant advances of the nanofabrication techniques reported over the past decade with a particular focus on the approaches tailored towards the fabrication of functional nano-devices. The review is divided into two sections: top-down and bottom-up nanofabrication. Under the classification of top-down, special attention is given to technical reports that demonstrate multi-directional patterning capabilities less than or equal to 100 nm. These include recent advances in lithographic techniques, such as optical, electron beam, soft, nanoimprint, scanning probe, and block copolymer lithography. Bottom-up nanofabrication techniques--such as, atomic layer deposition, sol-gel nanofabrication, molecular self-assembly, vapor-phase deposition and DNA-scaffolding for nanoelectronics--are also discussed. Specifically, we describe advances in the fabrication of functional nanocomposites and graphene using chemical and physical vapor deposition. Our aim is to provide a comprehensive platform for prominent nanofabrication tools and techniques in order to facilitate the development of new or hybrid nanofabrication techniques leading to novel and efficient functional nanostructured devices.     

A Self‐Digitization Dielectrophoretic (SD‐DEP) Chip for High‐Efficiency Single‐Cell Capture,On‐Demand Compartmentalization,and Downstream Nucleic Acid Analysis

The design and fabrication of a self‐digitization dielectrophoretic (SD‐DEP) chip with simple components for single‐cell manipulation and downstream nucleic acid analysis is presented. The device employed the traditional DEP and insulator DEP to create the local electric field that is tailored to approximately the size of single cells, enabling highly efficient single‐cell capture. The multistep procedures of cell manipulation, compartmentalization, lysis, and analysis were performed in the integrated microdevice, consuming minimal reagents, minimizing contamination, decreasing lysate dilution, and increasing assay sensitivity. The platform developed here could be a promising and powerful tool in single‐cell research for precise medicine.     

The intrinsic nanofibrillar morphology of polyaniline

Polyaniline nanofibers are shown to form spontaneously during the chemical oxidative polymerization of aniline. The nanofibrillar morphology does not require any template or surfactant, and appears to be intrinsic to polyaniline synthesized in water. Two approaches--interfacial polymerization and rapidly-mixed reactions--have been developed to prepare pure nanofibers. The key is suppressing the secondary growth that leads to agglomerated particles. The effects of different dopant acids and solvents are discussed. Changing the dopant acid can be used to tune the diameters of the nanofibers between about 30 and 120 nm. Changing the organic solvent in interfacial polymerization reactions has little effect on the product. A brief discussion of the processibility of the nanofibers is presented. The possibility of creating nanofibrillar structures for selected polyaniline derivatives is also demonstrated.     

Electrospinning of Hyperbranched Poly-L-Lysine/Polyaniline Nanofibers for Application in Cardiac Tissue Engineering

Electrospun polyaniline nanofibers are one of the most promising materials for cardiac tissue engineering due to their tunable electroactive properties. Moreover, the biocompatibility of polyaniline nanofibes can be improved by grafting of adhesive peptides during the synthesis. In this paper, we describe the biocompatible properties and cardiomyocytes proliferation on polyaniline electrospun nanofibers modified by hyperbranched poly-L-lysine dendrimers (HPLys). The microstructure characterization of the HPLys/polyaniline nanofibers was carried out by scanning electron microscopy (SEM). It was observed that the application of electrical current stimulates the differentiation of cardiac cells cultured on the nanofiber scaffolds. Both electroactivity and biocompatibility of the HPLys based nanofibers suggest the use this material for culture of cardiac cells and opens the possibility of using this material as a biocompatible electroactive 3-D matrix in cardiac tissue engineering.     

Effect of methanol on morphology of polyaniline

Constant potential method is used to synthesize polyaniline (PANI) nanofibers in a solution containing methanol. According to shaping theory, the reasons about forming polyaniline nanofibers were suggested. The effects of the synthesis parameters, such as monomer concentration, methanol concentration, HCl concentration, electrode potential, polymerization time, and reaction temperature on the morphology of the PANI films have been investigated. Scanning electron microscopy results was used to characterize the morphology of PANI nanofibers. Both UV-vis absorption spectra and FTIR spectra indicate that there exists interaction between methanol molecules and polyaniline chains.     

Effect of cellulose nanofibers on induced polymerization of aniline and formation of nanostructured conducting composite

Cellulose nanofibers (CNFs), derived from the most abundant and renewable biopolymer, are known as natural one-dimensional nanomaterials because of their high aspect ratio. CNFs also are rich in hydroxyl groups, offering opportunities for functionalization toward development of high-value nanostructured composites. Herein, CNFs were extracted from poplar wood powder by chemical pretreatment combined with high-intensity ultrasonication, and then coated with polyaniline (PANI) through in situ polymerization. The PANI-coated CNFs formed nanostructured frameworks around PANI, thereby conferring the CNF/PANI composite with stability and higher charge transport. The optimum PANI content to achieve maximum conductivity of CNF/PANI composites was determined. The morphology, crystall structure, chemical composition, and conductivity of the samples were characterized by transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and four-point probe method, respectivily. Our results demonstrated that CNFs can be effective as a template for a flexible and stable conducting polymer to form higher-order nanostructures.     

On-wire lithography-generated molecule-based transport junctions: a new testbed for molecular electronics

On-wire lithography (OWL) fabricated nanogaps are used as a new testbed to construct molecular transport junctions (MTJs) through the assembly of thiolated molecular wires across a nanogap formed between two Au electrodes. In addition, we show that one can use OWL to rapidly characterize a MTJ and optimize gap size for two molecular wires of different dimensions. Finally, we have used this new testbed to identify unusual temperature-dependent transport mechanisms for alpha,omega-dithiol terminated oligo(phenylene ethynylene).