Density and Viscosity of 1-Alkanols

Densities and viscosities have been measured for twelve 1-alkanols from methanol to 1-dodecanol at temperatures ranging from 303.15 to 323.15?K. Molar volumes, V _m , have been calculated from the density data, which have been found to follow the additive equation, V _m ?=?V _CH3 ?+?nV _CH2 ?+?V _OH, where n is the number of CH₂ groups. V _m have been plotted against n, showing an excellent linear relationship. The average values of V _CH2 at 303.15?K and 323.15?K have been determined from the slopes of this equation. The viscosities have been found to increase almost exponentially with the number of carbon atoms at different temperatures. The thermodynamic activation parameters, free energy, ?G ^≠, enthalpy, ?H ^≠, and entropy, ?S ^≠ for viscous flow have been plotted against the number of C atoms – all have been found to increase with the chain length of 1-alkanols.     

A study of thermal crystallization in glassy Se80Te20 and Se80In20 using DSC technique

Different methods have been used by various workers to determine the activation energy of thermal crystallization (E_c) in chalcogenide glasses using non-isothermal DSC data. In the present work, the crystallization kinetics of two important binary alloys Se₈₀Te₂₀ and Se₈₀In₂₀ is studied using non-isothermal DSC data. DSC scans of these alloys have been taken at five different heating rates. The values of activation energy of crystallization (E_c) have been determined by four different methods, i.e., Kissinger's method, Matusita-Sakka method, Augis-Bennett's method and Ozawa's method, have been used to calculate E_c. The results obtained have been compared with each other to see the effect of using different methods in the determination of E_c.     

Unimolecular rearrangements of ethylnitrene: An exploratory theoretical study

The products of the rearrangement of ethylnitrene are ethylideneimine via a 1,2 hydrogen shift, N-methyl methyleneimine via a 1,2 methyl shift, and the corresponding aziridine by cyclization. The three reactions have been studied by the semiempirical MNDO method. The charge transfer effects have been investigated. Theoretically calculated vibrational frequencies and kinetic properties have been used in calculating macroscopic thermodynamic and kinetic properties. The entropies of activation, the high pressure rate constants, k_∞, and the high pressure Arrhenius parameters, A_∞ and E_∞, have been computed. The kinetic isotope effects have also been studied.     

固相配位化学反应研究——ⅩⅩⅩⅡ.镍钨硫簇合物的固相合成

本文首次成功地在低热温度下固相反应合成镍钨硫杂核金属簇合物:[(n-Bu)₄N]₂[Ni(WS₄)₂]和[(n-Bu)₄N]₂[Ni(WOS₄)₂].用EXAFS、IR、UV.元素分析、TG-DTA等手段对上述化合物进行了表征.研究了温度、气氛等条件对合成反应的影响.     

Acidic peroxo salts: A new class of initiators for vinyl polymerization. III. Kinetics of polymerization of methyl methacrylate initiated by potassium monopersulfate catalyzed by Co(II)

Kinetics of the polymerization of methyl methacrylate by an acidic peroxo salt like potassium monopersulfate catalyzed by Co(II) have been investigated in aqueous medium, over the range of 35–50°C. The rates of polymerization (R_p) have been studied at various concentrations of monomer and initiator. The efficiencies of various metal salts in catalyzing the polymerization have been evaluated from the observed value of R_p. The effects of catalyst (CoSO₄), initiator, monomer, and various concentrations of FeCl₃ on R_p and percentage conversion have been studied. The end groups of the recovered polymers have been studied using standard methods. From the observed end groups and kinetic results, a reaction scheme has been proposed involving initiation by S O₄· or OH· radicals, generated by the interaction of the initiator with cobalt sulfate and termination of the polymer chains by mutual combination.     

Glass Stability and Glass Forming Ability of Ge25−xSe75Sbx (x = 12, 15, and 18) Chalcogenide Glasses Using Thermal Parameters

In the present communication glass stability (GS) and glass forming ability (GFA) of Ge_25−xSe₇₅Sb_x (x = 12, 15, and 18) chalcogenide glasses have been calculated in terms of certain thermal parameters, i.e., reduced glass transition temperature (T_rg), Hruby number (H), S-parameter (S), and ΔT. The glassy samples have been prepared by quenching of melt technique. For structure characterization, XRD technique has been used. For thermal analysis Differential Scanning Calorimetery (DSC) has been used. DSC scans have been recorded at different heating rates, i.e., 5, 10, 15, and 20 K min⁻¹. Stability of glassy samples has also been confirmed in terms of activation energy of glass transition calculated by Kissinger relation. All these parameters indicate that GS and GFA both decrease with increase of Sb content in Ge_25−xSe₇₅Sb_x (x = 12, 15, and 18) glassy series.     

Conductivity Studies of <Emphasis Type="Italic">n</Emphasis>-Tetrabutylammonium Tetraphenylborate in 3-Pentanone in the Temperature Range from 283.15 to 329.15 K

The molar conductivities (Λ) of solutions of n-tetrabutylammonium tetraphenylborate (NBu₄BPh₄) in 3-pentanone have been measured in the temperature range from 283.15 to 329.15 K. The conductance data have been analyzed using the Lee-Wheaton conductivity equation with the distance parameter (a) set at Bjerrum’s pairing distance, and the limiting molar conductivities (Λ_o) and the association equilibrium constants (K _A) have been derived. The limiting ion conductivities (λ_±^o) have been evaluated according to the method of Krumgalz. The λ₊ ^o values have been compared with λ₊ ^o values calculated from the empirical equation of Gill. The thermodynamic functions, Gibbs energy (Δ G _A ^o), enthalpy (Δ H _A ^o) and entropy (Δ S _A ^o) for the process of ion-pair formation as well as the activation energy of the ionic movement (ΔH ^∗) have been evaluated. The obtained results are discussed in terms of ion-ion and ion-solvent interactions.     

Autocatalytic waves in the nitric acid–formaldehyde system

Propagating reaction fronts generated in the autocatalytic oxidation of formaldehyde by nitric acid have been investigated. The experimental values of the wave velocity ν and those of the maximal reaction rate r_m at a given spatial coordinate have been described by the formulae ν = 2(Dk[CH₂(OH)₂]₀)^1/2 and r_m = 0.247 × k[CH₂(OH)₂]₀², respectively, (D and k constants). Similarities and differences to other nitric acid oxidations have been discussed. © 1995 John Wiley & Sons, Inc.     

Quantum chemistry study on B32 and B32H2–32

The structures of B32 and B₃₂H^2–₃₂ with I_h symmetry have been investigated by means of ab initio calculations at STO-3G level. The relationship between molecular orbitals of them has been analyzed and their bonding properties have been discussed. Then the possibility of their existence, as well as the similarity and difference between B₃₂ (B₃₂H^2–₃₂) and C₆₀ (C₆₀H₆₀) have been inferred.     

Theoretical study with vibration–rotation and dipole moment calculations of quartet states of the CrCl molecule

The potential energy curves have been investigated for the 10 lowest quartet electronic states in the ^2s+1Λ^± representation below 30,000 cm^?1 of the molecule CrCl via CASSCF and MRCI (singly and doubly excitation with Davidson correction) calculations. The harmonic frequency ω_e, the internuclear distance r_e, the rotational constant B_e, the electronic energy with respect to the ground state T_e, and the permanent dipole moment μ have been calculated. By using the canonical functions approach, the eigenvalues E_v, the rotational constant B_v, and the abscissas of the turning points r_min and r_max have been calculated for the considered electronic states up to the vibrational level v = 19. Seven electronic states have been studied here theoretically for the first time. The comparison of these values to the theoretical results available in the literature shows a good agreement. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Structural diversity of a series of chlorocadmate(II) and chlorocuprate(II) complexes based on benzylamine and its N-methylated derivatives

Protonated benzylamine and its N-methylated derivatives, [C₆H₅CH₂NH_3?n(CH₃)_n]⁺ (n?=?0?3), have been adopted as cations in chlorocadmate(II) and chlorocuprate(II) complexes, showing inorganic–organic hybrid architectures. For the Cd(II) compounds, the anionic structures vary from perovskite-type layers (n?=?0) to chains (n?=?1–3). For Cu(II) compounds, the anionic structures range from perovskite-type layers (n?=?0), chains (n?=?1) to mononuclear species (n?=?2–3). Coordination geometries of the metal ions and intermolecular interactions have been analyzed. Their dielectric properties have been measured.     

Thermal studies on some organotin(IV) complexes with piperidine and 2-aminopyridine dithiocarbamates

The complexes of piperidine dithiocarbamate, 2-aminopyridine dithiocarbamate and organotin(IV) of the type R₃Sn(L¹), R₂Sn(L¹)₂, R₃Sn(L²), R₂Sn(L²)₂, [R=C₆H₅CH₂ (benzyl), p-ClC₆H₄CH₂ (p-chlorobenzyl), L ¹=sodium piperidine dithiocarbamate and L ²=sodium 2-aminopyridine dithiocarbamate] have been synthesised and characterised by spectral studies (IR, UV, ¹H NMR). Thermogravimetric (TG) and differential thermal analytical (DTA) studies have beeen carried out for these complexes and from the TG curves, the order and apparent activation energy for the thermal decomposition reactions have been elucidated. The various thermal studies have been correlated with some structural aspects of the complexes concerned. From DTA curves, the heat of reaction has been calculated.     

Thermal behaviour of dimethylgold(III) carboxylates

The thermal properties of dimethylgold(III) carboxylates of general formula [(CH₃)₂Au(OOCR)]₂ (R=methyl (1), tert-buthyl (2), trifluoromethyl (3), or phenyl (4)) in solid state have been investigated by the thermogravimetric analysis. The temperature dependences of saturated vapour pressure of complexes have been studied by the Knudsen effusion method with mass spectrometric indication. The thermodynamic parameters Δ_sub H _T ⁰ and Δ_sub S _T ⁰ of the sublimation processes have been calculated. Thermal decomposition of the vapour of complexes 1 and 2 has been studied by means of high temperature mass spectrometry in vacuum, and by-products of decomposition have been determined.     

Theoretical electronic structure of the molecule ScBr

The potential energy curves have been investigated for the 23 lowest electronic states in the ^2s+1Λ^± representation of the molecule ScBr via CASSCF and MRCI (single and double excitations with Davidson correction) calculations. Seventeen electronic states have been studied theoretically for the first time. The harmonic frequency ω_e, the internuclear distance r_e, and the electronic energy with respect to the ground state T_e have been calculated. By using the canonical functions approach, the eigenvalues E_v, the rotational constant B_v, and the abscissas of the turning points (R_min, R_max) have been calculated for electronic states up to the vibrational level v = 32. The comparison of these values to the theoretical and experimental results available in the literature shows a good agreement. © 2007 Wiley Periodicalsm Inc. Int J Quantum Chem, 2008     

Synthesis,characterization, electrochemical study,and antimicrobial activity of bis(benzoylacetonato) vanadium(IV) complexes of biphenylphenols

New non-oxovanadium(IV) complexes of biphenylphenols, [VCl_{2? n} (bzac)₂(OAr^1,2) _n ], have been synthesized in quantitative yields from the reaction of bis(benzoylacetonato)dichlorovanadium(IV) with the trimethylsilyl derivative of 2- and 4-phenylphenols in carbon tetrachloride. The complexes have been characterized by physicochemical, magnetic moment measurements, IR, mass spectra, and electrochemical studies. The thermal behavior of the complexes has been studied by TGA–DTA. The complexes have been screened for their antimicrobial activity against some pathogenic bacteria, Escherichia coli and Staphylococcus aureus and fungi, Candida albicans, Aspergillus niger, and Fusarium oxysporum, by two-fold serial dilution.     

Relativistic calculation of autoionization widths of 1s2s2pjJ, 1s2s2 2S1/2, and 1s2pJ 2pj′J levels

The autoionization widths of levels 1s 2s 2p_jJ, 1s2s^{2 2}S_1/2, and 1s2p_j2p_j′ J have been calculated for ions with Z = 6–30. The calculation has been carried out in intermediate coupling. The decay amplitudes have been calculated in a relativistic approximation.     

Thermodynamic and spectroscopic studies on cationic surfactant tetradecyltrimethylammonium bromide in aqueous solution of trisubstituted ionic liquid 1, 2-dimethyl-3-octylimidazolium chloride at different temperatures

In this work, the effects on micellar behavior of long chain cationic surfactant tetradecyltrimethylammonium bromide (TTAB) upon the addition of trisubstituted ionic liquid (IL), 1, 2-dimethyl-3-octylimidazolium chloride [odmim][Cl] at temperatures, 298.15–318.15 K has been studied. Different techniques such as conductance, surface tension, fluorescence and ¹H NMR have been employed to understand the interactional mechanisms. The values of critical micelle concentration (cmc) and various thermodynamic parameters have been calculated from conductivity measurements. The surface parameters like effectiveness of decrease in surface tension (Π_cmc), minimum surface area occupied per surfactant monomer (A_min), maximum surface excess concentration (Γ_max), and adsorption efficiency (pC₂₀) have been evaluated by surface tension measurements. Micellar aggregation number (N_agg) has been determined by quenching of pyrene. Further to understand interactions in post micellar region, ¹H NMR measurements have been performed. It has been observed that the lipophilicity of interacting ion modified the thermodynamic and aggregation properties of TTAB.     

Nucleation and growth of Cu onto polycrystalline Pt electrode from acidic CuSO4 solution in the presence of H2SeO3

The early stages of Cu electrodeposition onto Pt(poly) have been investigated in 0.5 M H₂SO₄ + 0.01 M CuSO₄ solution without or with H₂SeO₃ when a molar concentration ratio [Cu(II)]/[Se(IV)] ≥ 2×10² using electrochemical and ex situ AFM techniques. The overpotential deposition of Cu has been performed onto a Pt surface precovered independently with Cu in amount close to an equivalent monolayer. Chronoamperometric results have been shown to follow an instantaneous 3D nucleation and diffusion-controlled growth model. The values of diffusion coefficient D for Cu²⁺, number of nuclei N and average nuclei radius r _av have been calculated. In the local regions of the surface, the separate large agglomerates composed of the different diameter clusters have been revealed in both cases, but, in the presence of the H₂SeO₃, they attained a distinct chain-like configuration. Some morphological characteristics have been reported.