Transmetalation reaction between hydrophobic silver nanoparticles and aqueous chloroaurate ions at the air-water interface

The transmetalation reaction between a sacrificial nanoparticle and more noble metal ions in solution has emerged as a novel method for creating unique hollow and bimetallic nanostructures. In this report, we investigate the possibility of carrying out the transmetalation reaction between hydrophobic silver nanoparticles assembled and constrained at the air-water interface and subphase gold ions. We observe that facile reduction of the subphase gold ions by the sacrificial silver nanoparticles occurs resulting in the formation of elongated gold nanostructures that appear to cross-link the sacrificial silver particles. This transmetalation reaction may be modulated by the insertion of an electrostatic barrier in the form of an ionizable lipid monolayer between the silver nanoparticles and the aqueous gold ions that impacts the gold nanoparticle assembly. Transmetalation reactions between nanoparticles constrained into a close-packed structure and appropriate metal ions could lead to a new strategy for metallic cross-linking of nanoparticles and generation of coatings with promising optoelectonic behavior.     

Mixing behavior of fluorinated and hydrogenated gemini surfactants at the air-water interface

Mixing behavior of hydrogenated and fluorinated cationic gemini surfactants was studied at the air-water interface by Brewster angle microscopy and pi-A isotherm curves. In the bulk, these two molecules did not mix and showed phase separation. At the air-water interface, if a monolayer was formed by separate deposition of the two solutions, they formed separate domains, and the compression occurred in two steps: first the domains with hydrogenated gemini surfactant were compressed until they showed collapse; then the domains with fluorinated gemini surfactant were compressed. If the two solutions were mixed before the deposition, they remained mixed upon compression; on the other hand, separate domains under separate deposition were shown to mix if the subphase was heated.     

Configuration and photochemical reaction of a bolaamphiphilic diacid with a diazo resin in monolayers and Langmuir-Blodgett films

The monolayer formation of a bolaamphiphile, 1,18-octadecanedicarboxylic acid (ODA), on pure water and the subphase containing a positively charged photoactive 2-nitro-N-methyldiphenylamine-4-diazoniumformaldehyde resin (NDR) have been investigated by pi-A isotherms, pi-t curves, and Brewster angle microscopy (BAM) measurements. It has been revealed that although an unstable monolayer was formed by ODA alone, a stable complex monolayer between ODA and NDR could be formed at the interface through electrostatic adsorption and hydrogen bonding. It has been shown that the ODA formed a U-shaped monolayer at a lower pressure and was converted to a stretched configuration upon compression to a higher surface pressure on the subphase containing NDR. Under UV irradiation at the interface photoreaction can occur in the complex monolayer, which causes shrinkage of the monolayer. Photochemical reactions can also occur in deposited Langmuir-Blodgett films. In reactions occurring at the air/water interface, the two ends of ODA can react with NDR to form an ester containing aromatic rings. This makes the compound more hydrophobic and can easily be stretched without any phase transition upon compression. When the film with U-shaped configuration was deposited onto solid substrates, the configuration could be kept even upon photoirradiation.     

PVP and G1.5 PAMAM dendrimer co-mediated synthesis of silver nanoparticles

PVP and G1.5 PAMAM dendrimer co-mediated silver nanoparticles of smaller than 5 nm in diameter were prepared using H₂ as reducing agent. With the TEM micrograph, it was found that the molar ratios of PVP and G1.5 PAMAM dendrimer have significant effect in the morphology and size distribution of silver nanoparticles. The reaction rate (fitting a first-order equation) was strongly influenced by the molar ratios of PVP and G1.5 PAMAM dendrimer and the reaction temperature. From the UV-Vis spectra of an aqueous solution of silver nanoparticles, they could be stored for at least 2 months without coagulation at room temperature.     

Formation of silver nanoparticles at the air-water interface mediated by a monolayer of functionalized hyperbranched molecules

Nanofibrillar micellar structures formed by the amphiphilic hyperbranched molecules within a Langmuir monolayer were utilized as matter for silver nanoparticle formation from the ion-containing water subphase. We observed that silver nanoparticles were formed within the multifunctional amphiphilic hyperbranched molecules. The diameter of nanoparticles varied from 2-4 nm and was controlled by the core dimensions and the interfibrillar free surface area. Furthermore, upon addition of potassium nitrate to the subphase, the Langmuir monolayer templated the nanoparticles' formation along the nanofibrillar structures. The suggested mechanism of nanoparticle formation involves the oxidation of primary amino groups by silver catalysis facilitated by "caging" of silver ions within surface areas dominated by multibranched cores. This system provides an example of a one-step process in which hyperbranched molecules with outer alkyl tails and compressed amine-hydroxyl cores mediated the formation of stable nanoparticles placed along/among/beneath the nanofibrillar micelles.     

Phase behavior and morphology of equimolar mixed cationic-anionic surfactant monolayers at the air/water interface: isotherm and Brewster angle microscopy analysis

The phase behavior and morphological characteristics of monolayers composed of equimolar mixed cationic-anionic surfactants at the air/water interface were investigated by measurements of surface pressure-area per alkyl chain (pi-A) and surface potential-area per alkyl chain (DeltaV-A) isotherms with Brewster angle microscope (BAM) observations. Cationic single-alkyl ammonium bromides and anionic sodium single-alkyl sulfates with alkyl chain length ranging from C(12) to C(16) were used to form mixed surfactant monolayers on the water subphase at 21 degrees C by a co-spreading approach. The results demonstrated that when the monolayers were at states with larger areas per alkyl chain during the monolayer compression process, the DeltaV-A isotherms were generally more sensitive than the pi-A isotherms to the molecular orientation variations. For the mixed monolayer components with longer alkyl chains, a close-packed monolayer with condensed monolayer characteristics resulted apparently due to the stronger dispersion interaction between the molecules. BAM images also revealed that with the increase in the alkyl chain length of the surfactants in the mixed monolayers, the condensed/collapse phase formation of the monolayers during the interface compression stage became pronounced. In addition, the variations in the condensed monolayer morphology of the equimolar mixed cationic-anionic surfactants were closely related to the alkyl chain lengths of the components.     

Fabrication of metal nanoparticle monolayers on amphiphilic poly(amido amine) dendrimer Langmuir films

A newly designed 1.5th generation poly(amido amine) dendrimer with an azacrown core, hexylene spacers, and octyl terminals was spread on gold nanoparticle (Au-NP) suspension. The surface pressure-area isothermal curves indicated that the molecular area of dendrimer on Au-NP suspension was significantly smaller than that on water, indicating the formation of dendrimer/Au-NP composites. The dendrimer Langmuir films on the Au-NP suspension were transferred to copper grids at various surface pressures and observed by transmission electron microscopy. The transferred films consisted of a fractal-like network of nanoparticles at low surface pressure and of a defect-rich monolayer of nanoparticles at high surface pressure. From these results, it was suggested that the dendrimers bind Au-NPs, and dendrimer/Au-NP composites formed networks or monolayers at the interface. From the intensity decrease of the Au plasmon band of Au-NP suspension after the formation of composite, it was estimated that some (approximately 14) dendrimer molecules bind to one Au-NP. Furthermore, neutron reflectivity at the air/suspension interface and X-ray reflectivity of the film transferred on a silicon substrate revealed that the dendrimer molecules are localized on the upper-half surface of Au-NP. Metal affinity of azacrown, flexibility of hexylene spacer, and amphiphilicity of dendrimer with octyl terminals played important roles for the formation of dendrimer/Au-NP hybrid films. The present investigation proposed a new method to fabricate the self-assembled functional polymer/nanoparticle hybrid film.     

One-step synthesis of monodisperse silver nanoparticles beneath vitamin E Langmuir monolayers

The monodisperse silver nanoparticles were synthesized by one-step reduction of silver ions in the alkaline subphase beneath vitamin E (VE) Langmuir monolayers. The monolayers and silver nanocomposite LB films were characterized by surface pressure-area (pi-A) isotherms, transmission electron microscopy (TEM), ultraviolet-visible spectroscopy (UV-vis), selected area electron diffraction (SAED), Fourier transform infrared transmission spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS), respectively. The results showed that the limiting area/VE molecule on different subphases varied. The phenolic groups in the VE molecules were converted to a quinone structure, and the silver ions were mainly reduced to ellipsoidal and spherical nanoparticles. The arrangement of the nanoparticles changed from sparseness to compactness with reaction time. The electron diffraction pattern indicated that the silver nanoparticles were face-centered cubic (fcc) polycrystalline. Silver nanocomposite LB films with excellent quality could be formed on different substrates, indicating that the transfer ratio of monolayer containing silver nanoparticles is close to unity. The dynamic process of reduction of silver ions by VE LB films was also studied through monitoring the conductivity of an Ag2SO4 alkaline solution.     

Equilibrium structure and dynamics of (2R, 3R)-(+)-bis(decyloxy)succinic acid at the air-water interface

A twin-tailed, twin-chiral fatty acid, (2R,3R)-(+)-bis(decyloxy)succinic acid was synthesized and its two dimensional behavior at the air-water interface was examined. The pH of the subphase had a profound effect on the monolayer formation. On acidic subphase, stable monolayers with increased area per molecule due to hydrogen bonding and bilayers at collapse pressures were observed. Highly compressible films were formed at 40 degrees C, while stable monolayers with increased area were observed at sub-room temperatures. Langmuir monolayers formed on subphases containing 1 mM ZnCl2 and CaCl2 revealed two dimensional metal complex formation with Zn2+ forming a chelate-type complex, while Ca2+ formed an ionic-type complex. Monolayers transferred from the condensed phase onto hydrophilic Si(100) and quartz substrates revealed the formation of bilayers through transfer-induced monolayer buckling. Compression induced crystallites in 2D from monolayers and vesicle-like supramolecular structures from multilayers were the noted LB film characteristics, adopting optical imaging and electron microscopy. The interfacial monolayer structure studied through molecular dynamics simulation revealed the order and packing at a molecular level; monolayers adsorbed at various simulated specific areas of the molecule corroborated the (pi-A) isotherm and the formation of a hexagonal lattice at the air-water interface.     

Time-dependent complexation of glucose-reduced gold nanoparticles with octadecylamine Langmuir monolayers

We report on the reduction of aqueous chloroaurate ions by glucose to form gold nanoparticles of uniform size. We further demonstrate the complexation of these particles with octadecylamine (ODA) monolayers at the air-water interface. Pressure-area (pi-A) isotherms as a function of time of complexation revealed a significant expansion of the monolayer. Surface pressure variation with time for constant areas after spreading of the monolayer was carried out to observe the kinetics of complexation of the colloidal particles at the interface. The kinetics of complexation of the particles at the interface was also monitored by Brewster angle microscopy (BAM) measurements. Langmuir-Blodgett films of the particles complexed with ODA were formed at a subphase pH of 9 onto different substrates. Quartz crystal microgravimetry (QCM) was used to quantify the amount of particles deposited per immersion cycle of the quartz crystal. The LB films were further characterized by UV-vis and transmission electron microscopy (TEM) measurements. TEM measurements indicate a close packed and equidistant arrangement of colloidal particles in the LB film, probably due to hydrogen-bonding interactions.     

Peptidolipid as binding site of acetylcholinesterase: molecular recognition of paraoxon in Langmuir films

Peptidolipid C18H35O (stearoyl)-Phe-Trp-Ser-His-Glu (peptidolipid A) was synthesized and spread at the air-water interface to study the interaction with an organophosphorus compound. Paraoxon, sodium dihydrogen phosphate, or 4-nitrophenyl phosphate disodium was added to the subphase, but only paraoxon changed the surface pressure-area (pi-A) isotherm of peptidolipid A. This indicated a specific interaction between paraoxon and peptidolipid A. To clarify which amino acid residue of peptidolipid A was responsible for the interaction, peptidolipid B, namely, C18H35O-Gly-His-Ser-Glu-Glu, was synthesized and studied as a Langmuir film. The difference between the pi-A isotherms of peptidolipid B in the absence and presence of paraoxon in the subphase was minimal; consequently, the presence of amino acids phenylalanine (Phe) and tryptophan (Trp) in peptidolipid A may explain the interaction between peptidolipid A and paraoxon. The compression-decompression cycles and kinetic studies of peptidolipid A showed that the Langmuir film was stable. The in situ optical properties of the peptidolipid A Langmuir film such as UV-vis and fluorescence spectroscopies were examined to elucidate the interaction between peptidolipid A and paraoxon. UV-vis absorption of peptidolipid A was investigated in the presence and absence of paraoxon in the subphase. The emission maximum of fluorescence of Trp in peptidolipid A was observed at 351 nm on pure water, and the band intensity decreased when the concentration of paraoxon increased in the subphase. This suggested that the Trp was involved in the molecular recognition process. Epifluorescence micrographs showed domains of peptidolipid A on the pure water subphase. In the presence of paraoxon in the subphase, the Langmuir film of peptidolipid A showed a homogeneity, which was another indication of the recognition between paraoxon and peptidolipid A.     

Study of molecular aggregation of artificial amyloid in a langmuir monolayer by infrared spectroscopy

A synthesized peptidolipid (C18IIGLM-NH2) comprised of a single C18-saturated hydrocarbon chain connected to the amino acid sequence IIGLM terminated with the NH2 group was spread on water, which formed a stable Langmuir monolayer. The Langmuir and Langmuir-Blodgett (LB) films have been characterized by measurements of surface pressure-area (pi-A) and surface potential-area (DeltaV-A) isotherms and infrared multiple-angle incidence resolution spectrometry (MAIRS). The Langmuir monolayer had a significantly larger limiting molecular area than that of a similar molecule of C18IIGLM-OH, which was reported in our previous study. The surface dipole moment analysis coupled with the pi-A isotherm suggested that the C18IIGLM-NH2 monolayer was extraordinarily stiff and the fundamental structure of the monolayer was brought about before the monolayer compression. The infrared MAIRS analysis of the C18IIGLM-NH2 LB film revealed that the backbone structure of the monolayer was the 'antiparallel' beta sheet aligned parallel to the substrate. Since the C18IIGLM-OH LB film was made of 'parallel' beta sheet with a random orientation, it has been found that the present C18IIGLM-NH2 Langmuir monolayer has a largely different monolayer structure, although the chemical structures are slightly different from each other by the terminal group only.     

Formation of Langmuir-Blodgett films of a clay and a water-soluble alkylammonium cation

We have studied the formation of ultrathin hybrid films composed of a water-soluble alkylammonium cation (trimethyloctadecylammonium caiton: TMODAH+) and clay nanosheets at an air-water interface. When a chloroform solution of the ammonium salt of TMODAH+Cl- was spread onto a surface of an aqueous clay suspension in a Langmuir trough, a stable monolayer of the water-soluble ammonium cation was formed by hybridization with the clay nanosheets at the air-water interface. Surface pressure--molecular area (pi-A) isotherm curve of the hybrid monolayer shifted to the smaller molecular area side with the increase in the concentration of the ammonium salt in the solution or with the decrease in that of the clay in the suspension. In some cases, the lift-off areas in the pi-A isotherm curves were less than the cross-sectional area of an alkyl chain (ca. 0.19 nm2). These results indicated that some ammonium cations spread onto the clay suspension were dissolved into the aqueous subphase before the hybridization with the clay nanosheets. The hybrid monolayers were transferred onto a glass plate in a layer-by-layer way by horizontal dipping to form a hybrid multilayerd film. Interestingly, the densities of TMODAH+ determined by the infrared spectral analysis were constant in the hybrid multilayers prepared from the clay suspensions at the same concentration, regardless of the concentrations of the ammonium salt solutions. XRD patterns of the films showed that the cations of TMODAH+ would lie down on the clay layer in the hybrid film.     

Synthesis of Dendrimer‐Encapsulated Silver Nanoparticles and Its Catalytic Activity on the Reduction of 4‐Nitrophenol

A new type of water soluble PEG core dendrimer having hydroxyl groups at the periphery was synthesized and used to prepare silver nanoparticles. The dendrimer and the dendrimer encapsulated nanoparticles (DENs) were characterized by spectroscopic techniques. The kinetics of catalytic activity of the prepared silver nanoparticle on the reduction of 4‐nitrophenol to 4‐aminophenol by NaBH₄ as a reductant was studied using UV‐Visible spectrophotometer.     

Study of adsorption and penetration of E2(279-298) peptide into Langmuir phospholipid monolayers

The peptide corresponding to the sequence (279-298) of the Hepatitis G virus (HGV/GBV-C) E2 protein was synthesized, and surface activity measurements, pi-A compression isotherms, and penetration of E2(279-298) into phospholipid monolayers spread at the air-water interface were carried out on water and phosphate buffer subphases. The results obtained indicated that the pure E2(279-298) Langmuir monolayer exhibited a looser packing on saline-buffered than on pure water subphase and suggest that the increase in subphase ionic strength stabilizes the peptide monolayer. To better understand the topography of the monolayer, Brewster angle microscopy (BAM) images of pure peptide monolayers were obtained. Penetration of the peptide into the pure lipid monolayers of dipalmitoylphosphatidylcholine (DPPC) and dimyristoylphosphatidylcholine (DMPC) and into mixtures of dimyristoylphosphatidylcholine/dimyristoylphosphatidylglycerol (DMPC/DMPG) at various initial surface pressures was investigated to determine the ability of these lipid monolayers to host the peptide. The higher penetration of peptide into phospholipids is attained when the monolayers are in the liquid expanded state, and the greater interaction is observed with DMPC. Furthermore, the penetration of the peptide dissolved in the subphase into these various lipid monolayers was investigated to understand the interactions between the peptide and the lipid at the air-water interface. The results obtained showed that the lipid acyl chain length is an important parameter to be taken into consideration in the study of peptide-lipid interactions.     

Patterning of magnetic bimetallic coordination nanoparticles of Prussian blue derivatives by the Langmuir-Blodgett technique

We report a novel method to prepare patterns of nanoparticles over large areas of the substrate. This method is based on the adsorption of the negatively charged nanoparticles dispersed in an aqueous subphase onto a monolayer of the phospholipid dipalmitoyl-l-α-phosphatidylcholine (DPPC) at the air-water interface. It has been used to prepare patterns of nanoparticles of Prussian blue analogues (PBA) of different size (K(0.25)Ni[Fe(CN)(6)](0.75) (NiFe), K(0.25)Ni[Cr(CN)(6)](0.75) (NiCr), K(0.25)Ni[Co(CN)(6)](0.75) (NiCo), Cs(0.4)Co[Cr(CN)(6)](0.8) (CsCoCr), and Cs(0.4)Co[Fe(CN)(6)](0.9) (CsCoFe)). The behavior of DPPC monolayer at the air-water interface in the presence of the subphase of PBA nanoparticles has been studied by the compression isotherms and Brewster angle microscopy (BAM) images. Atomic force microscopy (AFM) of the transferred films on mica substrates shows that patterns of the nanoparticles are observed for a 10(-4) M concentration of the subphase, based on the nanoparticle precursors, at surface pressures between 1 and 6 mN/m and transfer velocities from 10 to 80 mm/min. Vertical, horizontal, or tilted fringes of the nanoparticles with respect to the transfer direction can be obtained depending on the transfer velocity and surface pressure.     

Synthesis and supramolecular self-assembly study of a novel porphyrin molecule in Langmuir and Langmuir-Blodgett films

The self-assembly and supramolecular engineering of porphyrins into ordered arrays have recently attracted much interest because of their promising application potential in molecular and electronic devices, spintronics, energy harvesting and storage, catalysis, and sensor development. We herein report the synthesis and supramolecular self-assembly study of a novel porphyrin molecule, 2Por-TAZ, in Langmuir and Langmuir-Blodgett films. The 2Por-TAZ molecule contains two porphyrin macrocycles attached to a triaminotriazine headgroup. Triaminotriazines are known to form a highly ordered linear supramolecular self-assembly through complementary hydrogen bonding with barbituric acid molecules at the air-water interface. Surface pressure-area isotherm measurements and polarized UV-vis absorption spectroscopic studies indicate that the 2Por-TAZ molecules adopted an edge-on orientation at the air-water interface. Polarized UV-vis absorption study also revealed that the 2Por-TAZ molecules formed linear supramolecular networks on pure water and barbituric acid subphase with porphyrin flat planes facing toward the compression direction. The binding of barbituric acid with 2Por-TAZ molecules was observed from the expansion of the Langmuir monolayer film. Compared to the transferred LB film from pure water subphase, both the UV-vis absorbance and fluorescence emission intensity of the LB film transferred from barbituric acid subphase increased significantly.     

Behavior of pH-sensitive core shell particles at the air-water interface

In this article, the adsorption of latex core-responsive polymer-shell nanoparticles at the air-water interface is investigated using a Langmuir trough. Phase transition isotherms are used to explore their responsive behavior at the interface as a function of changes in the pH of the subphase. By adjusting the pH of the water prior to particle deposition, we probe the effect of the stabilizing polymer wetting by the water subphase on the stability of these particles at the air-water interface. In addition, by initially compressing a stable film of adsorbed particles and then subsequently changing the pH of the subphase we study desorption of these particles into the water phase.     

Silver nanoparticle monolayer-to-bilayer transition at the air/water interface as studied by the GISAXS technique: application of a new paracrystal model

An original diffraction model for the analysis of grazing-incidence small-angle X-ray scattering (GISAXS) from the nanoparticle Langmuir films was developed. This model relies on the concept of the 2D hexagonal paracrystal and employs the distorted-wave Born approximation that is relevant for GISAXS measurements at the air/water interface when the angle of incidence is close to the critical value. The model comprises the cases of the close-packed nanoparticle monolayer and bilayer with the AB-type layer stacking. In this way, both the lateral (along the interface) and vertical (normal to the interface) correlations of the nanoparticle positions can be analyzed. The model was applied to an in situ GISAXS study of the formation of a silver nanoparticle Langmuir film during compression at the air/water interface in the Langmuir-Blodgett trough. Spherical nanoparticles of 5.8 ± 0.6 nm diameter were employed. Different compression stages starting from the submonolayer up to the monolayer collapse via bilayer formation were analyzed in terms of the mean lateral interparticle distance, degree of paracrystal disorder, interlayer distance, vertical disorder, and layer-stacking type in the bilayer as well as the ratio between the monolayer and bilayer coverage in the final film. The model developed is applicable to any nanoparticle Langmuir film formed at the air/liquid interface to extract structural parameters on the nanoscale. The particular results obtained have direct implications on the preparation of silver plasmonic templates with "hot spots" for surface-enhanced Raman scattering.     

Langmuir monolayer of artificial pulmonary surfactant mixtures with an amphiphilic peptide at the air/water interface: comparison of new preparations with surfacten (Surfactant TA)

Interfacial behavior was studied on the pulmonary lipid mixture containing a newly designed amphiphilic alpha-helical peptide (Hel 13-5) that consists of 13 hydrophobic and 5 hydrophilic amino acid residues. Moreover, the data obtained were compared with those of commercially available Surfacten (Surfactant TA) which has been clinically used for neonatal respiratory distress syndrome (NRDS) in Japan. Surface pressure (pi)-A and surface potential (DeltaV)-area (A) isotherms were measured for our synthetic preparations and Surfacten. Herein, a mixture of dipalmitoylphosphatidylcholine (DPPC)/egg-phosphatidylglycerol (PG)/palmitic acid (PA) (68:22:9 by weight) was used as the constituent of basic preparations. Monolayers were spread on 0.02 M Tris buffer (pH 7.4) with 0.13 M NaCl at the air/liquid interface, and the surface behavior was investigated by employing the Wilhelmy method, an ionizing electrode method, and fluorescence microscopy (FM). Cyclic compression and expansion isotherms of the prepared materials (or products) (DPPC/PG/PA/Hel 13-5) were examined to confirm the spreading and respreading ability. For the prepared products, a plateau region exists on pi-A and DeltaV-A isotherms at approximately 42 mN m(-1), indicating that Hel 13-5 is squeezed out of surface monolayers together with fluid components (PG) upon lateral compression. That is, the squeeze-out phenomenon induces a 2D-3D phase transformation. In particular, the inclination of the pi-A isotherms at X(Hel 13-5) = 0.1 in the plateau region was almost zero irrespective of the molecular area. As proposed in the earlier report (Nakahara, H.; Lee, S.; Sugihara, G.; Shibata, O. Langmuir 2006, 22, 5792-5803), an observed refluorescence phenomenon was discussed for FM measurements. This phenomenon provides evidence of the squeeze-out motion with fluid molecules. Furthermore, the cyclic pi-A and DeltaV-A isotherms show larger hysteresis areas and better respreading abilities in comparison with the previous ternary systems (DPPC/PG/Hel 13-5 and DPPC/PA/Hel 13-5) that are very important properties in pulmonary functions. FM photographs and the temperature dependence of pi-A and DeltaV-A isotherms suggest that the phase behavior of the present preparation product is very similar to that of Surfacten in terms of the domain size and in parameters such as collapse pressures, maximum DeltaV values, and so on. These results demonstrate that PG and PA even in the present preparations work well for compression-expansion cycling as is the case in the previous ternary systems, and the present preparations show comparable properties to Surfacten in vitro.