Heterogeneous or homogeneous catalysis? Mechanistic studies of the rhodium-catalyzed dehydrocoupling of amine-borane and phosphine-borane adducts

In depth, comparative studies on the catalytic dehydrocoupling of the amine-borane adduct Me(2)NH.BH(3) (to form [Me(2)N-BH(2)](2)) and the phosphine-borane adduct Ph(2)PH.BH(3) (to form Ph(2)PH-BH(2)-PPh(2)-BH(3)) with a variety of Rh (pre)catalysts such as [[Rh(1,5-cod)(micro-Cl)](2)], Rh/Al(2)O(3), Rh(colloid)/[Oct(4)N]Cl, and [Rh(1,5-cod)(2)]OTf have been performed in order to determine whether the dehydrocoupling proceeds by a homogeneous or heterogeneous mechanism. The results obtained suggest that the catalytic dehydrocoupling of Me(2)NH.BH(3) is heterogeneous in nature involving Rh(0) colloids, while that of Ph(2)PH.BH(3) proceeds by a homogeneous mechanism even when starting with Rh(0) precursors such as Rh/Al(2)O(3). The catalytic dehydrocoupling reactions are thought to proceed by different mechanisms due to a combination of factors such as (i) the greater reducing strength of amine-borane adducts, (ii) the increased ease of dissociation of phosphine-borane adducts, and (iii) phosphine ligation and/or poisoning of active catalytic sites on metal colloids.     

Catalytic dehydrocoupling of amine-borane and phosphine-borane adducts: the mechanism is heterogeneous in one case and homogeneous in the other

The catalytic dehydrocoupling reactions of Me2NH.BH3 and Ph2PH.BH3 using the rhodium precatalyst [Rh(1,5-cod)(mu-Cl)]2 were found to proceed by different mechanisms: heterogeneous involving Rh(0) metal for the former case and homogeneous for the latter.     

Transition metal-catalyzed formation of boron-nitrogen bonds: catalytic dehydrocoupling of amine-borane adducts to form aminoboranes and borazines

A mild, catalytic dehydrocoupling route to aminoboranes and borazine derivatives from either primary or secondary amine-borane adducts has been developed using late transition metal complexes as precatalysts. The adduct Me(2)NH.BH(3) thermally eliminates hydrogen at 130 degrees C in the condensed phase to afford [Me(2)N-BH(2)](2) (1). Evidence for an intermolecular process, rather than an intramolecular reaction to form Me(2)N=BH(2) as an intermediate, was forthcoming from "hot tube" experiments where no appreciable dehydrocoupling of gaseous Me(2)NH.BH(3) was detected in the range 150-450 degrees C. The dehydrocoupling of Me(2)NH.BH(3) was found to be catalyzed by 0.5 mol % [Rh(1,5-cod)(mu-Cl)](2) in solution at 25 degrees C to give 1 quantitatively after ca. 8 h. The rate of dehydrocoupling was significantly enhanced if the temperature was raised or if the catalyst loading was increased. The catalytic activity of various other transition metal complexes (Ir, Ru, Pd) for the dehydrocoupling of Me(2)NH.BH(3) was also demonstrated. This new catalytic method was extended to other secondary adducts RR'NH.BH(3) which afforded the dimeric species [(1,4-C(4)H(8))N-BH(2)](2) (2) and [PhCH(2)(Me)N-BH(2)](2) (3) or the monomeric aminoborane (i)Pr(2)N=BH(2) (4) under mild conditions. A new synthetic approach to the linear compounds R(2)NH-BH(2)-NR(2)-BH(3) (5: R = Me; 6: R = 1,4-C(4)H(8)) was developed and subsequent catalytic dehydrocoupling of these species yielded the cyclics 1 and 2. The species 5 and 6 are postulated to be intermediates in the formation of 1 and 2 directly from the catalytic dehydrocoupling of the adducts R(2)NH.BH(3). The catalytic dehydrocoupling of NH(3).BH(3), MeNH(2).BH(3), and PhNH(2).BH(3) at 45 degrees C to give the borazine derivatives [RN-BH](3) (10: R = H; 11: R = Me; 12: R = Ph) was demonstrated. TEM analysis of the contents of the reaction solution for the [Rh(1,5-cod)(mu-Cl)](2) catalyzed dehydrocoupling of Me(2)NH.BH(3) together with Hg poisoning experiments suggested a heterogeneous catalytic process involving Rh(0) colloids.     

Intermediates in the Rh-catalysed dehydrocoupling of phosphine-borane

Active species, product distributions and a suggested catalytic cycle are reported for the dehydrocoupling of the phosphine-borane H(3)B·P(t)Bu(2)H to give HP(t)Bu(2)BH(2)P(t)Bu(2)BH(3) using the [Rh(COD)(2)][BAr(F)(4)] pre-catalyst.     

Poisoning of heterogeneous, late transition metal dehydrocoupling catalysts by boranes and other group 13 hydrides

Borane reagents are widely used as reductants for the generation of colloidal metals. When treated with a variety of heterogeneous catalysts such as colloidal Rh, Rh/Al2O3, and Rh(0) black, BH3.THF (THF = tetrahydrofuran) was found to generate H2 gas with the concomitant formation of a passivating boron layer on the surface of the Rh metal, thereby acting as a poison and rendering the catalyst inactive toward the dehydrocoupling of Me2NH.BH3. Analogous poisoning effects were also detected for (i) colloidal Rh treated with other species containing B-H bonds such as [HB-NH]3, or Ga-H bonds such as those present in GaH3.OEt2, (ii) colloidal Rh that was generated from Rh(I) and Rh(III) salts using borane or borohydrides as reductants, and (iii) for other metals such as Ru and Pd. In contrast, analogous poisoning effects were not detected for the catalytic hydrogenation of cyclohexene using Rh/Al2O3 or the Pd-catalyzed Suzuki cross-coupling of PhB(OH)2 and PhI. These results suggest that although this poisoning behavior is not a universal phenomenon, the observation that such boron layers are formed and surface passivation may exist needs to be carefully considered when borane reagents are used for the generation of metal colloids for catalytic or materials science applications.     

Rhodium-catalyzed dehydrocoupling of the sterically encumbered phosphine-borane adduct tBu(2)PH.BH(3): synthesis of the linear dimers tBu(2)PH-BH(2)-tBu(2)P-BH(3) and tBu(2)PH-BH(2)-tBu(2)P-BH(2)Cl

The dehydrocoupling of the sterically hindered phosphine-borane adduct tBu(2)PH.BH(3) above 140 degrees C is catalyzed by the rhodium complexes [Rh(1,5-cod)(2)][OTf] or Rh(6)(CO)(16) to give the four-membered chain tBu(2)PH-BH(2)-tBu(2)P-BH(3) (1), which was isolated in 60% yield and characterized by multinuclear NMR spectroscopy, mass spectrometry, and elemental analysis. Thermolysis of 1 in the temperature range 175-180 degrees C led to partial decomposition and the formation of tBu(2)PH.BH(3). When the dehydrocoupling of tBu(2)PH.BH(3) was performed in the presence of [[Rh(mu-Cl)(1,5-cod)](2)] or RhCl(3) hydrate, the chlorinated compound tBu(2)PH-BH(2)-tBu(2)P-BH(2)Cl (2) was formed which could not be obtained free of 1. The molecular structures of tBu(2)PH.BH(3), tBu(2)PH-BH(2)-tBu(2)P-BH(3) (1), and tBu(2)PH-BH(2)-tBu(2)P-BH(2)Cl (2) together with 1 were determined by single-crystal X-ray diffraction studies.     

Tuning the [L2Rh···H3B·NR3]+ interaction using phosphine bite angle. Demonstration by the catalytic formation of polyaminoboranes

Efficient catalysts for the dehydrocoupling or dehydropolymerisation of H(3)B·NMe(x)H((3-x)) (x = 1, 2) have been developed by variation of the P-Rh-P angle in {Rh(Ph(2)P(CH(2))(n)PPh(2))}(+) fragments (n = 2-5).     

Transition metal-catalyzed dissociation of phosphine-gallane adducts: isolation of mechanistic model complexes and heterogeneous catalyst poisoning studies

Attempts to induce the catalytic dehydrocoupling of the phosphine-gallane adduct Cy2PH.GaH3 (Cy=cyclohexyl) (1) by treatment with ca. 5 mol% of either the Rh(I) complex [{Rh(mu-Cl)(1,5-cod)}2] (cod=cyclooctadiene) or the Rh(0) species Rh/Al2O3 and [Oct4N]Cl-stabilized colloidal Rh led to catalytic P-Ga bond cleavage to generate the phosphine, H2, and Ga metal. Interestingly, subsequent treatment of the reaction mixtures with Me2NH.BH3 failed to lead to the formation of [Me2N-BH2]2 via Rh-catalyzed dehydrocoupling, which suggested that catalyst deactivation was taking place. Poisoning studies involving the treatment of the active Rh(0) catalyst with Cy2PH, PMe3, or GaH3.OEt2 showed that deactivation indeed occurred as the dehydrocoupling of Me2NH.BH3 either dramatically decreased in rate or did not take place at all. The X-ray photoelectron spectroscopy analysis of colloidal Rh(0) that had been treated with Cy2PH and PMe3 confirmed the presence of phosphorus on the catalyst surface in each case, consistent with catalyst poisoning via phosphine ligation. A mechanism for the Rh-catalyzed P-Ga bond cleavage reaction of 1 and Me3P.GaH3 (2) is proposed and involves the initial reaction of Ga-H bonds with the Rh colloid surface, which weakens and ultimately breaks the P-Ga bond. The reasonable nature of this mechanism is supported by a model reaction between the zerovalent group 9 complex Co2(CO)8 and 2 which afforded Me3P.Ga[Co(CO)4]3 (3). Consistent with the elongated and thus weakened P-Ga bond in 3, solutions of this species in Et2O subsequently form the known complex [(Me3P)Co(CO)3]2 (4) and Ga metal after 4 h at 25 degrees C.     

Rhodium(I) PNN Pincer Complexes with Proton-responsive Ligands: Synthesis,Characterisation, and Catalytic Dehydrocoupling of Amine Boranes

Coordination of a pyridine-pyrazole-based PNN(H) ligand to Rh^I produces a family of neutral ( 1 ) and cationic ( 2Cl ) Rh^I complexes. Deprotonation of the parent Rh chloride complex with LiNiPr₂ results in formation of a dinuclear LiCl bridged species 3 bearing a pyrazolate fragment. Complexes 1 , 2Cl and 3 were tested as precatalyst for the dehydrocoupling of amine boranes. All complexes studied show activity for the formation of cyclic oligomers with N-methylcyclotriborazane as the main product. Base activation of the neutral Rh chloride complex 1 produces catalyst systems that are significantly more active than the parent system, suggesting that dehydrohalogenation of the Rh chloride precatalyst 1 is one of the key steps for catalyst formation.     

Development of a generic mechanism for the dehydrocoupling of amine-boranes: a stoichiometric, catalytic, and kinetic study of H3B·NMe2H using the [Rh(PCy3)2]+ fragment

The multistage Rh-catalyzed dehydrocoupling of the secondary amine-borane H(3)B·NMe(2)H, to give the cyclic amino-borane [H(2)BNMe(2)](2), has been explored using catalysts based upon cationic [Rh(PCy(3))(2)](+) (Cy = cyclo-C(6)H(11)). These were systematically investigated (NMR/MS), under both stoichiometric and catalytic regimes, with the resulting mechanistic proposals for parallel catalysis and autocatalysis evaluated by kinetic simulation. These studies demonstrate a rich and complex mechanistic landscape that involves dehydrogenation of H(3)B·NMe(2)H to give the amino-borane H(2)B═NMe(2), dimerization of this to give the final product, formation of the linear diborazane H(3)B·NMe(2)BH(2)·NMe(2)H as an intermediate, and its consumption by both B-N bond cleavage and dehydrocyclization. Subtleties of the system include the following: the product [H(2)BNMe(2)](2) is a modifier in catalysis and acts in an autocatalytic role; there is a parallel, neutral catalyst present in low but constant concentration, suggested to be Rh(PCy(3))(2)H(2)Cl; the dimerization of H(2)B═NMe(2) can be accelerated by MeCN; and complementary nonclassical BH···HN interactions are likely to play a role in lowering barriers to many of the processes occurring at the metal center. These observations lead to a generic mechanistic scheme that can be readily tailored for application to many of the transition-metal and main-group systems that catalyze the dehydrocoupling of H(3)B·NMe(2)H.     

Selective homo- and heterodehydrocouplings of phosphines catalyzed by rhodium phosphido complexes

Reactions of the rhodium complex (dippe)Rh(eta3-CH2Ph) (1, dippe = iPr2PCH2CH2PiPr2) with ArPH2 (Ar = Ph, Mes) proceed via P-H oxidative additions to the phosphido complexes (dippe)Rh(mu-PHAr)2Rh(dippe) (3a, Ar = Ph; 3b, Ar = Mes). The corresponding reaction of Ph2PH occurs similarly, via the intermediate (dippe)Rh(PPh2)PHPh2 (4), to (dippe)Rh(mu-PPh2)2Rh(dippe) (3c). Complexes 3a-c and 4 are catalysts for the catalytic dehydrodimerizations of the corresponding phosphines to diphosphanes. Complex 1 is a more active dehydrocoupling catalyst, and substituent effects suggest that the active catalyst is mononuclear. Efficient dehydrocouplings of 2-EtC6H4PH2, 2-iPrC6H4PH2, and 2,4,6-iPr3C6H2PH2 were also observed. Complex 1 also catalyzes the heterocoupling of Ph2PH with PhSH (to Ph2P-SPh), and stoichiometric reactions in this system allowed isolation of (dippe)Rh(mu-SPh)2Rh(dippe) (6) and (dippe)Rh(SPh)PHR2 (7a, R2PH = MesPH2; 7b, R2PH = Ph2PH).     

Rhodium-catalyzed dehydrocoupling of fluorinated phosphine-borane adducts: synthesis, characterization, and properties of cyclic and polymeric phosphinoboranes with electron-withdrawing substituents at phosphorus

The dehydrocoupling of the fluorinated secondary phosphine-borane adduct R2PH.BH3 (R = p-CF3C6H4) at 60 degrees C is catalyzed by the rhodium complex [{Rh(mu-Cl)(1,5-cod)}2] to give the four-membered chain R2PH-BH2-R2P-BH3. A mixture of the cyclic trimer [R2P-BH2]3 and tetramer [R2P-BH2]4 was obtained from the same reaction at a more elevated temperature of 100 degrees C. The analogous rhodium-catalyzed dehydrocoupling of the primary phosphine-borane adduct RPH2.BH3 at 60 degrees C gave the high molecular weight polyphosphinoborane polymer [RPH-BH2]n (Mw = 56,170, PDI = 1.67). The molecular weight was investigated by gel permeation chromatography and the compound characterized by multinuclear NMR spectroscopy. Interestingly, the electron-withdrawing fluorinated aryl substituents have an important influence on the reactivity as the dehydrocoupling process occurred efficiently at the mildest temperatures observed for phosphine-borane adducts to date. Thin films of polymeric [RPH-BH2]n (R = p-CF3C6H4) have also been shown to function as effective negative-tone resists towards electron beam (e-beam) lithography (EBL). The resultant patterned bars were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM) and time-of-flight secondary ion mass spectrometry (TOF-SIMS).     

Homogeneous, titanocene-catalyzed dehydrocoupling of amine-borane adducts

Transition metal catalysis represents a relatively unexplored but potentially useful route to form bonds between main group elements. Previous work in the area of amine-borane adduct dehydrocoupling has exclusively employed late transition metal (e.g., Rh) catalysts which were found to predominantly operate via a heterogeneous mechanism. Herein, we present a new, early transition-metal-catalyzed, homogeneous system which exhibits higher activity.     

Do Rhodium Bis(σ‐amine‐borane) Complexes Play a Role as Intermediates in Dehydrocoupling Reactions of Amine‐boranes?

The recently synthesized rhodium complex [Rh{P(C₅H₉)₂(η²‐C₅H₇)}(Me₂HNBH₃)₂]BAr^F₄ ( 2 ), which incorporates two amine‐boranes coordinated to the rhodium center with two different binding modes, namely η¹ and η², has been used to probe whether bis(σ‐amine‐borane) motifs are important in determining the general course of amine‐boranes dehydrocoupling reactions. DFT calculations have been carried out to explore mechanistic alternatives that ultimately lead to the formation of the amine‐borane cyclic dimer [BH₂NMe₂]₂ ( A ) by hydrogen elimination. Sequential concerted, on‐ or off‐metal, intramolecular dehydrogenations provide two coordinated amine‐borane molecules. Subsequent dimerization is likely to occur off the metal in solution. In spite of the computationally confirmed presence of a BH???NH hydrogen bond between amine‐borane ligands, neither a simple intermolecular route for dehydrocoupling of complex 2 is operating, nor seems [Rh{P(C₅H₉)₂(η²‐C₅H₇)} B ]⁺ to be important for the whole dehydrocoupling process.     

Facile,Catalytic Dehydrocoupling of Phosphines Using β‐Diketiminate Iron(II) Complexes

Catalytic dehydrocoupling of primary and secondary phosphines has been achieved for the first time using an iron pre‐catalyst. The reaction proceeds under mild reaction conditions and is successful with a range of diarylphosphines. A proton acceptor is not needed for the transformation to take place, but addition of 1‐hexene does allow for turnover at 50 °C. The catalytic system developed also facilitates the dehydrocoupling of phenylphosphane and dicyclohexylphosphane. A change in solvent switches off dehydrocoupling to allow hydrophosphination of alkenes.     

When is a nanoparticle a cluster? An operando EXAFS study of amine borane dehydrocoupling by Rh(4-6) clusters

X-ray absorption fine structure (XAFS) is used to determine the structure of the rhodium cluster present during the catalyzed dehydrocoupling of amine boranes under operando conditions. We show how a variety of XAFS strategies can be used in combination with other analytical methods to differentiate homogeneous from heterogeneous systems. Analysis of the in situ XAFS spectra using a series of amine boranes (NH3BH3, R2NHBH3, and RNH2BH3 where R = methyl, isopropyl, tert-butyl, and cyclohexyl) and rhodium catalyst precursor compounds (including chloro-(1,5-cyclooctadiene)rhodium (I) dimer, bis(1,5-cyclooctadiene)rhodium (I) trifluoromethanesulfonate, chlorodicarbonylrhodium (I) dimer, dichloro(pentamethylcylcopentadienyl)rhodium (III) dimer, hexarhodium hexadecacarbonyl, and tetrarhodium dodecacarbonyl) strongly suggest that the active catalyst species for this reaction is a homogeneous rhodium complex. Rhodium clusters containing four or six rhodium atoms (Rh(4-6)) bound to amine boranes are observed as the major (>99%) rhodium containing species during and after the catalyzed anaerobic dehydrocoupling. During the later stages of the reaction a nonmetallic rhodium complex precipitates in which individual Rh(4-6) clusters likely form polymer chains ligated by the reaction products that have two or more ligating sites. The best fits of the XAFS data, using ab initio calculations of FEFF theory, show that the major rhodium species (80%) has each rhodium atom directly bound to three rhodium atoms with an observed bond distance of 2.73 A and to two boron atoms at 2.10 A. A minor (20%) rhodium species has each rhodium atom bound to four rhodium atoms with a bond distance of about 2.73 A and a single rhodium atom at a nonbonding distance of 3.88 A. No metallic rhodium was observed at any time during the anaerobic reaction.     

CATALYTIC DEHYDROCOUPLING OF AMINE-BORANE ADDUCTS TO FORM AMINOBORANES AND BORAZINES

A mild, catalytic dehydrocoupling route to aminoboranes and borazine derivatives from either primary or secondary amine-borane adducts has been developed using late transition metal complexes as precatalysts. The dehydrocoupling of Me ₂ NH·BH ₃ was found to be catalyzed by 0.5 mol% [Rh(1,5-cod)(μ-Cl)] ₂ in solution at 25°C to give [Me ₂ N─BH ₂ ] ₂ (1) quantitatively after ca. 8 h. This new catalytic method was extended to other secondary adducts RR ′NH·BH ₃ which afforded the dimeric [(1,4-C ₄ H ₈ )N─BH ₂ ] ₂ (2) and [PhCH ₂ (Me)N─BH ₂ ] ₂ (3) or the monomeric aminoborane ⁱ Pr ₂ N═BH ₂ (4) under mild conditions. The catalytic dehydrocoupling of NH ₃ ·BH ₃ , MeNH ₂ ·BH ₃ , and PhNH ₂ ·BH ₃ at 45°C affords the borazine derivatives [RN─BH] ₃ (5: R = H; 6: R = Me; 7:R = Ph). TEM analysis of the contents of the reaction solution for the [Rh(1,5-cod)(μ-Cl)] ₂ catalyzed dehydrocoupling of Me ₂ NH·BH ₃ together with Hg poisoning experiments suggested a soluble heterogeneous catalyst involving Rh(0) nanoclusters.     

Template-assisted synthesis of shape-controlled Rh2P nanocrystals

When reacted with trioctylphosphine at approximately 360 degrees C, rhodium nanocrystals convert to rhodium phosphide Rh(2)P nanocrystals. Careful control over synthetic variables, such as temperature, stabilizing ligands, and cosolvents, can result in Rh(2)P nanocrystals with shapes that reflect the Rh nanocrystal templates. Accordingly, Rh nanocrystals with multipod, cube- and triangle-derived shapes convert to Rh(2)P nanocrystals that maintain the shape of their Rh precursors. Both dense and hollow Rh(2)P nanocrystals can be generated using a single unified chemical conversion strategy. These empirical guidelines for generating a morphologically diverse library of Rh(2)P nanocrystals provide important insights into shape conservation using nanocrystal templates and will likely be portable to other multielement systems for which rigorous shape-controlled synthesis remains challenging.     

RgCo双金属催化剂的研究IV. Rh2Co2/Al2O3上的吸附中心类型及吸附性能

利用CO和NO作为双探针分子对Rh2Co2/Al2O3的吸附中心类型和吸附性能进行了详细的研究。结果表明Rh2Co2/Al2O3上存在Rh上的孪生和桥式CO吸附中心以及Co上的线式CO吸附中心。其中Rh上的孪生和桥式CO吸附中心对CO和NO的吸附性能与Rh4/Al2O3上的孪生和桥式CO中心相似。Co上的线式CO吸附中心以预吸附的CO能被NO取代, 预吸附的NO不能被CO取代而区别于Rh4/Al2O3上的Rh的线式CO吸附中心; 又以既能吸附CO又能吸附NO而不同于Co2/Al2O3和Rh+Co/Al2O3上的Co中心。与母体簇的结构相关联, 表明H2还原后的Rh2Co2/Al2O3上Rh2Co2(CO)12簇结构仍保持, 且Rh-Co相互作用强。     

P?C‐Activated Bimetallic Rhodium Xantphos Complexes: Formation and Catalytic Dehydrocoupling of Amine–Boranes

{Rh(xantphos)}‐based phosphido dimers form by P C activation of xantphos (4,5‐bis(diphenylphosphino)‐9,9‐dimethylxanthene) in the presence of amine–boranes. These dimers are active dehydrocoupling catalysts, forming polymeric [H₂BNMeH]_n from H₃B⋅NMeH₂ and dimeric [H₂BNMe₂]₂ from H₃B⋅NMe₂H at low catalyst loadings (0.1 mol %). Mechanistic investigations support a dimeric active species, suggesting that bimetallic catalysis may be possible in amine–borane dehydropolymerization.