Preparation, characterization, and heck reaction of siloxane films derived from carbosilane dendrons with a bromophenyl group at the focal point and up to 27 SiCl3 groups at the periphery

Multidentate organosiloxane thin films were prepared on SiO2/Si surfaces by solution phase deposition of carbosilane dendrons containing a bromophenyl group at the focal point and 3 (Br-G0), 9 (Br-G1), and 27 (Br-G2) SiCl3 groups at the periphery. The films were characterized by contact angle goniometry, ellipsometry, and X-ray photoelectron spectroscopy (XPS). The results indicated that about six Br-G0 molecules covered the same surface area as three Br-G1 molecules and one Br-G2 molecule. Hence, the density of the bromophenyl groups in the films could be defined by the size (generation) of the dendron adsorbates. We also demonstrated that the bromophenyl groups on the film surfaces could serve as a handle for attaching conjugated molecules via formation of C-C bonds. Thus, upon treatment of the films with 4-fluorostyrene under Heck reaction conditions, XPS analysis showed that about 90, 66, and 51% of the bromine atoms in the films prepared from Br-G0, Br-G1, and Br-G2 were consumed, and 94, 82, and 58% of the consumed bromine atoms were replaced by fluorostyryl groups. The remaining bromophenyl groups were probably not accessible to the reactants because of their unfavorable orientation. The overall yields for the surface Heck reaction were estimated to be 84, 54, and 30% for the films prepared from Br-G0, Br-G1, and Br-G2, respectively.     

X-ray studies of self-assembled organic monolayers grown on hydrogen-terminated Si(111)

The structure of self-assembled monolayers (SAMs) of undecylenic acid methyl ester (SAM-1) and undec-10-enoic acid 2-bromo-ethyl ester (SAM-2) grown on hydrogen-passivated Si(111) were studied by X-ray reflectivity (XRR), X-ray standing waves (XSW), X-ray fluorescence (XRF), atomic force microscopy, and X-ray photoelectron spectroscopy (XPS). The two different SAMs were grown by immersion of H-Si(111) substrates into the two different concentrated esters. UV irradiation during immersion was used to create Si dangling bond sites that act as initiators of the surface free-radical addition process that leads to film growth. The XRR structural analysis reveals that the molecules of SAM-1 and SAM-2 respectively have area densities corresponding to 50% and 57% of the density of Si(111) surface dangling bonds and produce films with less than 4 angstroms root-mean-square roughness that have layer thicknesses of 12.2 and 13.2 angstroms. Considering the molecular lengths, these thicknesses correspond to a 38 degrees and 23 degrees tilt angle for the respective molecules. For SAM-2/Si(111) samples, XRF analysis reveals a 0.58 monolayer (ML) Br total coverage. Single-crystal Bragg diffraction XSW analysis reveals (unexpectedly) that 0.48 ML of these Br atoms are at a Si(111) lattice position height that is identical to the T1 site that was previously found by XSW analysis for Br adsorbed onto Si(111) from a methanol solution and from ultrahigh vacuum. From the combined XPS, XRR, XRF, and XSW evidence, it is concluded that Br abstraction by reactive surface dangling bonds competes with olefin addition to the surface.     

An efficient convergent synthesis of novel anisotropic adsorbates based on nanometer-sized and tripod-shaped oligophenylenes end-capped with triallylsilyl groups

This article describes an efficient and convergent synthesis of a novel tripod-shaped oligophenylene compound. The compound consists of three oligophenylene heptamers as the tripod legs and one bromophenyl group as the functional arm, joining at a tetrahedron silicon atom. Each tripod leg is end-capped with a triallylsilyl group for covalently anchoring the molecules on hydrogen-terminated silicon surfaces via hydrosilylation. The compound may represent a new type of anisotropic adsorbates for controlling the orientation of and spacing between functional groups in organic thin films and nanostructures grown on silicon surfaces. An oligophenylene hexamer end-capped with a triallylsilyl group and a pinacol arylboronate group was readily derived from diiodoterphenyl with a bromophenyl boronic acid by selective Suzuki coupling. Reaction conditions for highly selective Suzuki coupling of sterically hindered pinacol boronate with aryl iodide in the presence of multiple ethenyl groups for the competing Heck reaction were developed. Under the optimal conditions (Pd(PPh3)4/KOH/Bu4NBr/toluene/H2O, 85 degrees C, overnight), p-bromophenyl-tris(p-iodo-phenyl)silane reacted with 3 equiv of the hexaphenylene boronate to provide the tripod-shaped oligophenylene, composed of 22 phenylene and 9 allyl groups, in 78% yield.     

Structural characterization of 4-bromostyrene self-assembled monolayers on si(111)

Organic functionalization of silicon holds promise for a variety of applications ranging from molecular electronics to biosensing. Because the performance and reliability of organosilicon devices will be intimately tied to the detailed structure of the organic adlayers, it is imperative to develop systematic strategies for forming and characterizing self-assembled monolayers (SAMs) on silicon with submolecular spatial resolution. In this study, we use 4-bromostyrene for the photochemical growth of Br-terminated SAMs on Si(111). A variety of experimental and theoretical techniques including atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), X-ray reflectivity (XRR), X-ray standing waves (XSW), X-ray fluorescence (XRF), and density functional theory (DFT) have been employed to determine the coverage and conformation of the 4-bromostryene molecules within the SAM. In particular, AFM verifies a continuous and atomically flat SAM, and the XRR data indicate a SAM thickness of 8.50 A and a molecular coverage of 46% of the surface silicon atoms. Because the DFT calculations indicate a molecular length of 8.89 A, the measured XRR thickness implies a molecular tilt angle of approximately 17 degrees. The XRR analysis also suggests that the Br atoms are preserved on top of the SAM in agreement with XPS measurements that show bromine bound solely to carbon and not to silicon. XRF reveals a Br atomic coverage of 50%, again in close agreement to that found by XRR. Single-crystal Bragg diffraction XSW is used to generate a three-dimensional map of the Br distribution within the SAM, which in conjunction with the XRR result suggests that the 4-bromostyrene molecules are tilted such that the Br atoms are located over the T4 sites at a height of 8.50 A above the top bulklike Si(111) layer. The direction of molecular tilt toward the T4 sites is consistent with that predicted by the DFT calculation. Overall, through this unique suite of complementary structural characterization techniques, it is concluded that the Br functional handle is preserved at the top of the SAM and is available for further substitutional chemistry.     

Synthesis of Novel Carbosilane Dendrimers Based on Pentaerythritol

Novel pentaerythritol-based carbosilane dendrimers centered at carbon have been synthesised. Starting from tetraallyl ether based upon pentaerythritol as the core molecule, a succession of alternate Pt-catalyzed hydrosilylation of allyl groups with HSiC13 and allylations of SiC1 groups thus introduced with CH2=CHCH2MgBr in THF provided a divergent synthesis of three generations of carbosilane dendrimers in which the Si atoms are linked by CH2CH2CH2 groups. The reaction conditions for hydrosilylation must be well controlled. After purification by chromatography on silica gel pure products for each generation were obtained. The IR, ^1H and ^13C NMR spectra and elemental analysis data are consistent with the proposed structures. The molecular weights of the resulting carbosilne dendrimers have been determined by vapor pressure osmometry.     

Experimental and theoretical study of the adsorption of fumaramide [2]rotaxane on Au(111) and Ag(111) surfaces

Thin films of fumaramide [2]rotaxane, a mechanically interlocked molecule composed of a macrocycle and a thread in a "bead and thread" configuration, were prepared by vapor deposition on both Ag(111) and Au(111) substrates. X-ray photoelectron spectroscopy (XPS) and high-resolution electron-energy-loss spectroscopy were used to characterize monolayer and bulklike multilayer films. XPS determination of the relative amounts of carbon, nitrogen, and oxygen indicates that the molecule adsorbs intact. On both metal surfaces, molecules in the first adsorbed layer show an additional component in the C 1s XPS line attributed to chemisorption via amide groups. Molecular-dynamics simulation indicates that the molecule orients two of its eight phenyl rings, one from the macrocycle and one from the thread, in a parallel bonding geometry with respect to the metal surfaces, leaving three amide groups very close to the substrate. In the case of fumaramide [2]rotaxane adsorption on Au(111), the presence of certain out-of-plane phenyl ring and Au-O vibrational modes points to such bonding and a preferential molecular orientation. The theoretical and experimental results imply that the three-dimensional intermolecular configuration permits chemisorption at low coverage to be driven by interactions between the three amide functions of fumaramide [2]rotaxane and the Ag(111) or Au(111) surface.     

Fabrication and properties of fullerodendron thin films

Thin films of fullerodendron (C(60)(Gn-COOMe) (n = 0.5, 1.5, 2.5)), which was synthesized from fullerene and anthracenyl poly(amido amine) dendron with methyl ester terminals and different generations (G), were fabricated by the Langmuir-Blodgett (LB) and adsorption techniques. It was characterized by X-ray reflectometry that the LB films possessed well-ordered structure, although the adsorption method led to random orientation of molecules. As to C(60)(G0.5-COOMe) and C(60)(G1.5-COOMe), the LB films took a four-layer structure consisting of a double layer of molecules, and fullerene moieties exist in the interior of the LB films. On the other hand, C(60)(G2.5-COOMe) led to a two-layer structure in which the fullerene moieties were at the air side and the dendron moieties were at the substrate side. With increasing generation of dendron, the monolayer formation ability at the air/water interface as amphiphilic molecule strengthens and the amphiphilic property becomes superior to the fullerene-fullerene attractive interaction that prevents the monolayer formation. Furthermore, in the case of C(60)(G0.5-COOMe) and C(60)(G1.5-COOMe), the reduction peak in cyclic voltammetry of the LB film remained even after UV light irradiation. On the contrary, the peak of the C(60)(G2.5-COOMe) LB film disappeared, indicating that molecular arrangement in the films affects electrochemical properties.     

Carboranethiol-modified gold surfaces. A study and comparison of modified cluster and flat surfaces

Four different carboranethiol derivatives were used to modify the surfaces of gold nanoparticles and flat gold films. The novel materials engendered from these modifications are extraordinarily stable species with surfaces that support self-assembled monolayers of 1-(HS)-1,2-C2B10H11, 1,2-(HS)2-1,2-C2B10H10, 1,12-(HS)2-1,12-C2B10H10, and 9,12-(HS)2-1,2-C2B10H10, respectively. Surprisingly, characterization of these materials revealed that a number of molecules of the carboranethiol derivatives are incorporated inside the nanoparticles. This structural feature was studied using a number of techniques, including X-ray photoelectron spectroscopy (XPS), UV-vis, and IR spectroscopies. Thermal desorption experiments show that carborane molecules detach and leave the nanoparticle surface mostly as 1,2-C2B10H10 isotopic clusters, leaving sulfur atoms bound to the gold surface. The surfaces of both the gold nanoparticles and the flat gold films are densely packed with carboranethiolate units. One carborane cluster molecule occupies an area of six to seven surface gold atoms of the nanoparticle and eight surface gold atoms of the flat film. XPS data showed that molecules of 1,12-(HS)2-1,12-C2B10H10 bind to the flat gold surface with only half of the thiol groups due to the steric demands of the icosahedral carborane skeleton. Electrochemical measurements indicate complete coverage of the modified gold surfaces with the carboranethiol molecules.     

Synthesis of thioether derivatives of hyperbranched carbosilane polymer

Novel hyperbranched functional and non-functional carbosilane polymers bearing the thioether groups were synthesized. Thioether derivatives were prepared by the UV initiated hydrothiolation of the hyperbranched poly(allyl)carbosilane polymer with 1-decanethiol and 3-mercaptopropyl(methyl)dimethoxysilane.     

Preparation and characterization of carbosilane dendrimer-bonded silica gel and its use in LC

Divergently synthesized carbosilane dendrimers generations 1(G1) and 2 (G2) with allyl end groups were bonded onto silica gel. Reactions between the dendrimers and acid-processed silica gel took place, with toluene reflux and organic base as catalyst. Chemically bonded silica gel was characterized by transmission electron microscopy (TEM), infrared (IR), and other methods. The chemically modified silica gels were packed into high-pressure liquid chromatography (HPLC) column and their separation characters were evaluated. G2-bonded silica gel was effective in separating homologous compounds of alcohol, alkyl-substituted benzene, N-substituted benzene, metacrylic acid ester and phthalate. __________ Translated from Journal of Shandong University, 2005, 40(6) (in Chinese)     

Synthesis of carbosilane dendritic wedges and their use for the construction of dendritic receptors

A divergent route for the synthesis of carbosilane wedges that contain either a bromine or amine as focal point has been developed. These new building blocks enable the construction of various core-functionalized carbosilane dendrimers. As a typical example carbosilane dendrimers up to the third generation containing a N,N',N'-1,3,5-benzenetricarboxamide core (G1-G3) have been synthesized. This new class of molecules has been studied as host molecules and they have been found to bind protected amino acids as guest molecules via hydrogen bonding interactions. A decrease in the association constants was observed for the higher generation dendritic hosts, which is attributed to the increased steric hindrance around the core where the binding site is located. The binding properties of the dendritic host molecules can be tuned by modifying the binding motif at the core of the carbosilane dendrimers. A higher association constant for N-CBZ-protected glutamic acid 1-methyl ester (5) was observed when the third generation N,N',N'-1,3,5-tris(L-alaninyl)benzenetricarboxamide core-functionalized carbosilane dendrimer (G3') was used as the host molecule compared to G3. Different association constants for the formation of the diastereomeric G3'.L-5(K=295 M(-1)) and G3'.(D-5)(2) (K=236 M(-1)) host-guest complexes were observed, pointing to a small enantioselective recognition effect. The difference between the association constants for the formation of the G3'.(L-5)(2) and G3'.(D-5)(2) host-guest complexes was much more pronounced, K=37 M(-1)versus K=10 M(-1), respectively.     

Thin films derived from giant, tripod-shaped oligophenylenes end-capped with triallylsilyl groups on hydrogen-terminated Si(111) surfaces

Monolayers of giant, tripod-shaped molecules 1 with each tripod leg composed of seven phenylene units end-capped with a triallylsilyl group were prepared on hydrogen-terminated silicon surfaces (H-Si(111)) via thermally induced surface hydrosilylation. The films were characterized by ellipsometry, contact-angle goniometry, and X-ray photoelectron spectroscopy (XPS). The measured ellipsometric thickness of 24 Angstrom of the films suggests anchoring of 1 on the substrate surface with a tripod orientation of high coverage. By measuring the contact angle hysteresis of a series of probe liquids with systematically varied sizes, the molecular pores present on the films consisting of the intercalated molecules of 1 are similar to the cross sectional areas of glycerol and decalin of 0.32-0.49 nm(2). Finally, as evidenced by XPS, excellent yields ( approximately 90%) of Suzuki coupling reactions with arylboronic acid derivatives on the films was achieved, suggesting that the desired tripod orientation of such giant molecules as 1 helps to eliminate the steric hindrance for the reaction.     

Hydrogen‐bonding patterns in enaminones: (2Z)‐1‐(4‐bromophenyl)‐2‐(pyrrolidin‐2‐ylidene)ethanone and its piperidin‐2‐ylidene and azepan‐2‐ylidene analogues

The title compounds, namely (2Z)‐1‐(4‐bromophenyl)‐2‐(pyrrolidin‐2‐ylidene)ethanone, C₁₂H₁₂BrNO, (I), (2Z)‐1‐(4‐bromophenyl)‐2‐(piperidin‐2‐ylidene)ethanone, C₁₃H₁₄BrNO, (II), and (2Z)‐2‐(azepan‐2‐ylidene)‐1‐(4‐bromophenyl)ethanone, C₁₄H₁₆BrNO, (III), are characterized by bifurcated intra‐ and intermolecular hydrogen bonding between the secondary amine and carbonyl groups. The former establishes a six‐membered hydrogen‐bonded ring, while the latter leads to the formation of centrosymmetric dimers. Weak C—H...Br interactions link the individual molecules into chains that run along the [011], [101] and [101] directions in (I)–(III), respectively. Additional weak Br...O, C—H...π and C—H...O interactions further stabilize the crystal structures.     

Rigid molecular tripod with an adamantane framework and thiol legs. Synthesis and observation of an ordered monolayer on Au111

Tripod-shaped trithiols 1-3, containing CH2SH groups at the three bridgehead positions of the adamantane framework and a halogen-containing group [Br (1), p-BrC6H4 (2), or p-IC6H4 (3)] at the fourth bridgehead, were synthesized, and self-assembled monolayers (SAMs) were prepared on atomically flat Au111 surfaces. The three-point chemisorption of these tripods was confirmed by polarization modulation infrared reflection absorption spectroscopy, which showed the absence of a S-H stretching band. Scanning tunneling microscopy of the SAM of 1 exhibited a hexagonal arrangement of the adsorbed molecule with a lattice constant of 8.7 angstroms. A unidirectionally oriented, head-to-tail array of 1, which allows the close approach of neighboring molecules, is proposed as a reasonable model of the two-dimensional crystal, where the adsorbed sulfur atoms form a quasi-(radical3 x radical3)R30 degrees lattice. The charge of the electrochemical reductive desorption of the SAM of 1 was in good agreement with the expected surface coverage, while the SAMs of 2 and 3 showed somewhat less (ca. 70%) charge. The large negative reduction peak potentials, observed for the SAM of 1, are taken to indicate a tight anchoring of this tripod by three sulfur atoms.     

Mesoporous Silica Nanoparticles Decorated with Carbosilane Dendrons as New Non‐viral Oligonucleotide Delivery Carriers

A novel nanosystem based on mesoporous silica nanoparticles covered with carbosilane dendrons grafted on the external surface of the nanoparticles is reported. This system is able to transport single‐stranded oligonucleotide into cells, avoiding an electrostatic repulsion between the cell membrane and the negatively charged nucleic acids thanks to the cationic charge provided by the dendron coating under physiological conditions. Moreover, the presence of the highly ordered pore network inside the silica matrix would make possible to allocate other therapeutic agents within the mesopores with the aim of achieving a double delivery. First, carbosilane dendrons of second and third generation possessing ammonium or tertiary amine groups as peripheral functional groups were prepared. Hence, different strategies were tested in order to obtain their suitable grafting on the outer surface of the nanoparticles. As nucleic acid model, a single‐stranded DNA oligonucleotide tagged with a fluorescent Cy3 moiety was used to evaluate the DNA adsorption capacity. The hybrid material functionalised with the third generation of a neutral dendron showed excellent DNA binding properties. Finally, the cytotoxicity as well as the capability to deliver DNA into cells, was tested in vitro by using a human osteoblast‐like cell line, achieving good levels of internalisation of the vector DNA/carbosilane dendron‐functionalised material without affecting the cellular viability.     

Synthesis of nanoparticle-cored dendrimers by convergent dendritic functionalization of monolayer-protected nanoparticles

This article presents a synthesis method for nanoparticle-cored dendrimers (NCDs), which have dendritic architectures around a monolayer-protected gold nanoparticle. The synthesis method is based on a strategy in which the synthesis of monolayer-protected nanoparticles is followed by adding dendrons on functionalized nanoparticles by a single coupling reaction. NMR spectroscopy, IR spectroscopy, and thermogravimetric analysis (TGA) characterizations confirmed the successful coupling reaction between dendrons with different generations ([G1], [G2], and [G3]) and COOH-functionalized nanoparticles ( approximately Au201L71). The dendrimer wedge density also could be controlled by reacting nanoparticles having different loading of COOH groups ( approximately 60 and approximately 10% COOH of the 71 ligands per gold nanoparticle) with functionalized dendrons. Transmission electron microscope results showed that this synthesis strategy maintains the average size of the nanoparticle core during dendron coupling reactions. This control over the composition and core size makes the systematic study of NCDs with different generations possible. The chemical stability of NCDs was found to be affected by dendron generation around the nanoparticle core. The current-potential response of NCD films on microelectrode arrays exhibited better electrical conductivity for NCDs with lower dendron generation.     

Vibrational spectra study of fluorescent dendrimers built from the cyclotriphosphazene core with terminal dansyl and carbamate groups

The FTIR and FT Raman spectra of the "Janus"-type dendrimers, possessing five carbamate groups on one side and five fluorescent dansyl derivatives on the other side, with amide G(1) and hydrazone G(2) central linkages were studied. These surface-block dendrimers are obtained by the coupling of two different dendrons. The FTIR and FT-Raman spectra of the zero generation dendrons, built from the hexafunctional cyclotriphosphazene core, with five dansyl terminal groups and one carbamate G(0v) and one oxybenzaldehyde function G(0v)' have been recorded. The structural optimization and normal mode analysis were performed for dendron G(0v)' on the basis of the density functional theory (DFT). The calculated geometrical parameters and harmonic vibrational frequencies are predicted in a good agreement with the experimental data. It was found that dendron molecule G(0v)' has a concave lens structure with planar -O-C(6)H(4)-CHO fragments and slightly non-planar cyclotriphosphazene core. The experimental IR and Raman spectra of dendron G(0v)' were interpreted by means of potential energy distributions. Relying on DFT calculations a complete vibrational assignment is proposed. The strong band 1597 cm(-1) show marked changes of the optical density in dependence of substituents in the aromatic ring. The frequencies of ν(N-H) bands in the IR spectra reveal the presence of the different types of H-bonds in the dendrimers.     

衬底温度对强流脉冲离子束烧蚀沉积类金刚石薄膜化学结构的影响

采用强流脉冲离子束(High-intensitypulsedionbeam,HIPIB)烧蚀技术在Si(100)基体上沉积类金刚石(Diamond-likecarbon,DLC)薄膜,衬底温度的变化范围为298～673K.利用Raman光谱和X射线光电子谱(XPS)对DLC薄膜的化学结合状态与衬底温度之间关系进行研究.薄膜XPS的C1s谱的解谱分析得出薄膜中含有sp³C(结合能为285.5eV)和sp²C(结合能为284.7eV)成分,根据解谱结果评价薄膜中sp³C含量.根据XPS分析可知,衬底温度低于473K时,sp³C的含量大约为40%左右;随着沉积薄膜时衬底温度的提高,sp³C的含量降低,由298K时的42.5%降到673K时的8.1%,从573K开始发生sp³C向sp²C转变.Raman光谱表明,随着衬底温度的提高,Raman谱中G峰的峰位靠近石墨峰位,G峰的半峰宽降低,D峰与G峰的强度比I_D/I_G增大,说明薄膜中的sp³C的含量随衬底温度增加而减少.     

A study of the electronic structure of octavinylsilsesquioxane and dendron with chromium based compounds by X-ray photoelectron spectroscopy and quantum chemical modeling in the DFT approximation

The electronic structure and some features of octavinylsilsesquioxane interaction with sulfene chloride chromium acetylacetonate complex were studied by means of XPS and DFT. According to XPS, spectrum lines have close positions for all the studied compounds, half-width for dendrons not exceeding 2 eV. For octavinylsilsesquioxane, the broader lines appear due to the action of substrate atoms. Chemical composition of a dendron was determined by analyzing the concentrations of atoms in different chemical states and a residual content of chlorine atoms. Chemical bonding between the complex and octavinylsilsesquioxane is provided by the covalent interaction of carbon and sulfur atoms.     

"A posteriori" modification of carbosilane dendrimers and dendrons: their activation in core and branch positions

The introduction of phenyl groups at different points on carbosilane dendrimers allows their acidolytic conversion to highly reactive triflato groups which in turn are readily substituted by anionic nucleophiles. Core phenylated first-fourth generation dendrimers were synthesized from tri(allyl)phenylsilane by an alternating sequence of hydrosilylation and allylation steps. Similarly, carbosilane dendrimers containing phenyl-Si groups at the branching points and in the periphery were prepared from tetraallylsilane which was hydrosilylated with PhHSiCl2. Reaction of the phenylated dendrimers with triflic acid in toluene cleanly gave the silyl triflate derivatives, provided that the correct stoichiometry of the reagents was used. In the presence of a large excess of triflic acid the SiMe3-end groups are slowly converted to SiMe2(OTf)-units. The proof of concept was provided by the fixation of a {Ph2PCH2} group using the lithiated diphenylphosphinomethanide Ph2PCH2Li, obtained by cleavage of Ph3SnCH2PPh2 with PhLi, as well as a lithiated ether-alcohol functionalized triphos derivative to the core of a third generation carbosilane dendrimer.