Modeling adsorbate‐induced property changes of carbon nanotubes

Because of their potential for chemical functionalization, carbon nanotubes (CNTs) are promising candidates for the development of devices such as nanoscale sensors or transistors with novel gating mechanisms. However, the mechanisms underlying the property changes due to functionalization of CNTs still remain subject to debate. Our goal is to reliably model one possible mechanism for such chemical gating: adsorption directly on the nanotubes. Within a Kohn–Sham density functional theory framework, such systems would ideally be described using periodic boundary conditions. Truncating the tube and saturating the edges in practice often offers a broader selection of approximate exchange–correlation functionals and analysis methods. By comparing the two approaches systematically for NH₃ and NO₂ adsorbates on semiconducting and metallic CNTs, we find that while structural properties are less sensitive to the details of the model, local properties of the adsorbate may be as sensitive to truncation as they are to the choice of exchange–correlation functional, and are similarly challenging to compute as adsorption energies. This suggests that these adsorbate effects are nonlocal. © 2017 Wiley Periodicals, Inc.     

Addition of carbenes to the sidewalls of single-walled carbon nanotubes

The addition of carbenes CX(2) (X=H, Cl) to single-walled carbon nanotubes (SWNTs) was investigated by density functional theory and finite, hydrogen-terminated nanotube clusters or periodic boundary conditions in conjunction with basis sets of up to polarized triple-zeta quality. For armchair [(3,3) to (12,12)] and zigzag tubes [(3,0) to (18,0)], reaction of CH(2) with the C--C bond oriented along the tube axis (A) is less exothermic than with those C--C bonds having circumferential (C) orientation. This preference decreases monotonically with increasing tube diameter for armchair, but not for zigzag tubes; here, tubes with small band gaps have a very low preference for circumferential addition. Axial addition results in cyclopropane products, while circumferential addition produces "open" structures for both armchair and zigzag tubes. The barriers for addition of dichlorocarbene to a (5,5) SWNT, studied for a finite C(90)H(20) cluster, are higher than that for addition to C(60), in spite of similar diameters of the carbon materials. Whereas addition of CCl(2) to [60]fullerene proceeds in a concerted fashion, addition to a (5,5) armchair SWNT is predicted to occur stepwise and involve a diradicaloid intermediate according to B3LYP, PBE, and GVB-PP computations. Addition to C bonds of (5,5) armchair tubes resulting in the thermodynamically more stable insertion products is kinetically less favorable than that to A bonds yielding cyclopropane derivatives.     

Integrated QMMM and Monte Carlo methods for analysis of adsorptive interactions between goethite cluster,carbon nanotubes,and arsenate

Iron‐immobilized nanoporous carbon is a well‐known adsorbent used in treating arsenic‐contaminated waters. In this contribution, we present findings on the adsorptive interactions and dynamics of arsenate–goethite cluster ([FeO(OH)]₆) with carbon nanotubes (CNTs) using hybridized quantum mechanics/molecular mechanics (QMMM) calculations. The CNTs adsorption mechanism is of interest since a better understanding of the fundamental interactions between arsenate, goethite, and carbon surfaces would translate to advances in CNT‐based adsorbent production and utilization. Novel applications of general amber force field (GAFF) and isobaric‐isothermal Gibbs ensemble Monte Carlo (NpT‐GEMC) methods are described. By the abovementioned methods, we postulate that the [FeO(OH)]₆/CNT‐2.3 (diameter 2.3 nm ‐ mesoporous) system enhances the qualitative (i.e., improved chemisorption) rather than the quantitative adsorptive aspect (i.e., total ions adsorbed) in comparison to the [FeO(OH)]₆/CNT‐1.6 (diameter 1.6 nm ‐ microporous) system.     

Interaction between alkyl radicals and single wall carbon nanotubes

The addition of primary, secondary, and tertiary alkyl radicals to single wall carbon nanotubes (SWCNTs) was studied by means of dispersion corrected density functional theory. The PBE, B97‐D, M06‐L, and M06‐2X functionals were used. Consideration of Van der Waals interactions is essential to obtain accurate addition energies. In effect, the enthalpy changes at 298 K, for the addition of methyl, ethyl, isopropyl, and tert‐butyl radicals onto a (5,5) SWCNT are: ?25.7, ?25.1, ?22.4, and ?16.6 kcal/mol, at the M06‐2X level, respectively, whereas at PBE/6‐31G* level they are significantly lower: ?25.0, ?19.0, ?16.7, and ?5.0 kcal/mol respectively. Although the binding energies are small, the attached alkyl radicals are expected to be stable because of the large desorption barriers. The importance of nonbonded interactions was more noticeable as we moved from primary to tertiary alkyl radicals. Indeed, for the tert‐butyl radical, physisorption onto the (11,0) SWCNT is preferred rather than chemisorption. The bond dissociation energies determined for alkyl radicals and SWCNT follow the trend suggested by the consideration of radical stabilization energies. However, they are in disagreement with some degrees of functionalization observed in recent experiments. This discrepancy would stem from the fact that for some HiPco nanotubes, nonbonded interactions with alkyl radicals are stronger than covalent bonds. © 2012 Wiley Periodicals, Inc.     

Regioselective multistep reconstructions of half‐saturated zigzag carbon nanotubes

The open edge reconstruction of half‐saturated (6,0) zigzag carbon nanotube (CNT) was introduced by density functional calculations. The multistep rearrangement was demonstrated as a regioselective process to generate a defective edge with alternating pentagons and heptagons. Not only the thermal stability was found to be enhanced significantly after reconstruction but also the total spin of CNT was proved to be reduced gradually from high‐spin septet to close‐shell singlet, revealing the critical role of deformed edge on the geometrical and magnetic properties of open‐ended CNTs. Kinetically, the initial transformation was confirmed as the rate‐determining step with relatively the largest reaction barrier and the following steps can take place spontaneously. © 2016 Wiley Periodicals, Inc.     

椅型碳纳米管吸附氧原子的密度泛函理论研究

利用密度泛函B3LYP对有限长扶手椅形单壁碳纳米管(3,3),(4,4)和(5,5)吸附O原子的几何结构、电子属性、反应能和红外光谱进行了系统地理论研究,获得了一些有意义的结果,主要包括如下4个方面:(1)2个O原子吸附在管外壁垂直于管轴的C—C键形成开环的轮烯结构,吸附在管内壁形成环氧结构;(2)O原子吸附在管外壁要比吸附在管内壁具有较大的能隙和吸附反应能;(3)与单壁碳纳米管管外壁吸附1个O原子相比,2个O原子吸附在管外壁具有较大的吸附反应能;(4)B3LYP得到的C—O伸缩振动频率与实验一致.     

Oxygen adsorption characteristics on hybrid carbon and boron‐nitride nanotubes

In this work, first‐principles density functional theory (DFT) is used to predict oxygen adsorption on two types of hybrid carbon and boron‐nitride nanotubes (CBNNTs), zigzag (8,0), and armchair (6,6). Although the chemisorption of O₂ on CBNNT(6,6) is calculated to be a thermodynamically unfavorable process, the binding of O₂ on CBNNT(8,0) is found to be an exothermic process and can form both chemisorbed and physisorbed complexes. The CBNNT(8,0) has very different O₂ adsorption properties compared with pristine carbon nanotubes (CNTs) and boron‐nitride nanotube (BNNTs). For example, O₂ chemisorption is significantly enhanced on CBNNTs, and O₂ physisorption complexes also show stronger binding, as compared to pristine CNTs or BNNTs. Furthermore, it is found that the O₂ adsorption is able to increase the conductivity of CBNNTs. Overall, these properties suggest that the CBNNT hybrid nanotubes may be useful as a gas sensor or as a catalyst for the oxygen reduction reaction. © 2014 Wiley Periodicals, Inc.     

Quantum chemical modeling of the addition reactions of 1‐n‐phenylpropyl radicals to C60 fullerene

Modeling of the addition of various radicals to C₆₀ fullerene is currently an active research area. However, the radicals considered are not able to adequately model polymeric radicals. In this work, we have performed a theoretical study of the possible reactions of C₆₀ fullerene with 1‐n‐phenylpropyl radicals, which are used to model polystyrene radicals. Several possible ways of subsequent addition of up to four 1‐phenylpropyl radicals to C₆₀ have been analyzed, the structures of the intermediates have been defined and thermal properties, such as the activation enthalpies of the corresponding reactions, have been calculated using density functional theory with the approximation of PBE/3z. It is shown that the topology of the spin density distribution on the fullerenyl radical causes regioselectivity for further radical addition. According to the energetic characteristics of the reactions, we assume the possibility of formation of products of one‐, two‐, three‐, and four‐ addition of the growth radical to the fullerene core in radical polymerization of styrene in the presence of C₆₀ fullerene. © 2016 Wiley Periodicals, Inc.     

Nitrogen-doped carbon nanotubes: growth, mechanism and structure

Nitrogen-doped bamboo-structured carbon nanotubes have been successfully grown using a series of cobalt/molybdenum catalysts. The morphology and structure of the nanotubes were analysed by transmission electron microscopy and Raman spectroscopy. The level of nitrogen doping, as determined by X-ray photoelectron spectroscopy, was found to range between 0.5 to 2.5 at.%. The growth of bamboo-structured nanotubes in the presence of nitrogen, in preference to single-walled and multi-walled nanotubes, was due to the greater binding energy of nitrogen for cobalt in the catalyst compared to the binding strength of carbon to cobalt, as determined by density functional theory.     

Stability of narrow zigzag carbon nanotubes

First principles calculations of the electronic structure and total energy of narrow zigzag carbon nanotubes and their corresponding flat graphene strips have been carried out to assess the relative stability of the tube form. The results indicate that the smallest energetically stable carbon nanotube has a radius of about 0.2 nm. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2003     

Optical and vibrational properties of toroidal carbon nanotubes

Toroidal carbon nanotubes (TCNTs), which have been evaluated for their potential applications in terahertz communication systems, provide a challenge of some magnitude from a purely scientific perspective. A design approach to TCNTs, as well as a classification scheme, is presented based on the definition of the six hollow sections that comprise the TCNT, slicing each of them to produce a (possibly creased) planar entity, and projecting that entity onto a graphene lattice. As a consequence of this folding approach, it is necessary to introduce five- and seven-membered rings as defect sites to allow the fusing together of the six segments into final symmetric TCNTs. This analysis permits the definition of a number of TCNT geometry families containing from 108 carbons up to much larger entities. Based on density functional theory (DFT) calculations, the energies of these structural candidates have been investigated and compared with [60]fullerene. The structures with the larger tube diameters are computed to be more stable than C(60) , whereas the smaller diameter ones are less stable, but may still be within synthetic reach. Computational studies reveal that, on account of the stiffness of the structures, the vibrational frequencies of characteristic low-frequency modes decrease more slowly with increasing ring diameter than do the lowest optical excitation energies. It was found that this particular trend is true for the "breathing mode" vibrations when the diameter of the tubes is small, but not for more flexible toroidal nanotubes with larger diameters.     

Convergence of the binding energy of oxygen on Cu(100): A cautionary tale for computational chemists using periodic bound conditions

The convergence of the binding energy of oxygen on Cu(100) as a function of the k‐points, energy cutoff for the inclusion of plane waves, surface model, and oxygen coverage is studied. Overall the convergence is good, with an accuracy of 0.1 eV obtained for an affordable level of treatment. Published 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

碳纳米管与咪唑类离子液体相互作用机制的理论研究

离子液体(IL)与碳纳米管(CNT)形成的复合体系在许多重要领域有潜在的应用价值,然而人们对于其微观结构的理解尚不清晰,对IL与CNT相互作用机理的认识还存有争议.本文以(8,0)CNT与1-丁基-3-甲基咪唑六氟化磷IL为例研究了CNT与IL的相互作用,分别探讨了1-丁基-3-甲基咪唑阳离子([BMIM+])、六氟化...     

B和N原子掺杂超长(3,3)单壁碳纳米管的从头算研究

用从头算的周期边界条件方法,建立了(3,3)型超长单壁碳纳米管的新模型.使用B3LYP/3-21G方法计算了B和N掺杂纳米管的结构参数、掺杂能量、能带结构以及能隙.研究表明,B和N原子掺杂的(3,3)型单壁碳纳米管具有直接带隙半导体特征,其α轨道计算所得能隙值分别为1.797和2.041 eV.     

Hydrogen adsorption in carbon nanostructures: comparison of nanotubes, fibers, and coals

Single-walled carbon nanotubes (SWNT) were reported to have record high hydrogen storage capacities at room temperature, indicating an interaction between hydrogen and carbon matrix that is stronger than known before. Here we present a study of the interaction of hydrogen with activated charcoal, carbon nanofibers, and SWNT that disproves these earlier reports. The hydrogen storage capacity of these materials correlates with the surface area of the material, the activated charcoal having the largest. The SWNT appear to have a relatively low accessible surface area due to bundling of the tubes; the hydrogen does not enter the voids between the tubes in the bundles. Pressure-temperature curves were used to estimate the interaction potential, which was found to be 580+/-60 K. Hydrogen gas was adsorbed in amounts up to 2 wt % only at low temperatures. Molecular rotations observed with neutron scattering indicate that molecular hydrogen is present, and no significant difference was found between the hydrogen molecules adsorbed in the different investigated materials. Results from density functional calculations show molecular hydrogen bonding to an aromatic C[bond]C that is present in the materials investigated. The claims of high storage capacities of SWNT related to their characteristic morphology are unjustified.     

Improved interfacial properties of PI composites through graphene oxide and carbon nanotubes on carbon fiber surface

Carbon nanotubes (CNTs) have been identified as excellent nanoreinforcements for carbon fiber (CF)–reinforced polymers regarding a wide range of engineering applications. The outstanding properties of CNTs, such as their large surface area, high mechanical strength, and low manufacturing cost bring them to be distinguished nanoreinforcements for carbon fiber–reinforced polymers to form multifunctional and multiscale composites. Electrophoretic deposition of graphene oxide for CNTs onto the CF surface was conducted. The presence of graphene oxide–CNTs may effectively increase both the roughness and wettability of the CF surface, resulting in an improvement to the interfacial bonding strength between the CF and the polyimide (PI).     

Evaluation of density functional theory in the bond rupture of octane

Density functional methods at the 6-31G* level are applied to the rupture of n-octane into methyl–heptyl, ethyl–hexyl, propyl–pentyl, and butyl–butyl radical fragments. The energetics of the radicals at UMP3, UMP2/6-31G*//UHF/6-31G* (hereafter referred to as UMP), are compared to UB3LYP/6-31G* results (referred to as UB). Although the UMP approach matches additivity energies to within 5 kcal/mol, it fails to mimic the overall energetic trend. The UB energies agree with additivity estimates and trends to within 1–2 kcal/mol and radical entropies deviate by only 2 e.u. from available experimental data. © 1998 John Wiley & Sons, Inc. J Comput Chem 19: 154–167, 1998