Elastic properties of GexAsySe100−x−y glasses

The elastic properties of Ge_xAs_ySe_100−x−y (0x30; 10y40) glasses have been studied. The results were analyzed in terms of the dependence on the theoretical mean coordination number (mean number of covalent bonds per atom) m (m=2+(2x+y)×0.01). Three ranges of m (2.1m2.51, 2.51<m2.78, 2.78<m3) were revealed, where different dependencies of elastic moduli (Young’s modulus, shear modulus) and Poisson’s ratio of glasses on m were observed.     

XPS and electroluminescence studies on SrS1−xSex and ZnS1−xSex thin films deposited by atomic layer deposition technique

SrS_1−xSe_x and ZnS_1−xSe_x thin films were deposited by the atomic layer deposition (ALD) technique using elemental selenium as the Se source, thus avoiding use of H₂Se or organometallic selenium compounds. X-ray diffraction (XRD) analysis showed that the films were solid solutions and X-ray photoelectron spectroscopy (XPS) data showed that the surface of both ZnS_1−xSe_x and SrS_1−xSe_x were covered with an oxide and carbon-containing contaminants from exposure to air. The oxidation of SrS_1−xSe_x extended into the film and peak shifts from sulfate were found on the surface. Luminance measurements showed that emission intensity of the ZnS_1−xSe_x:Mn alternating current thin film electroluminescent (ACTFEL) devices at fixed voltage was almost the same as that of the ZnS:Mn device, while emission intensity of the SrS_1−xSe_x:Ce devices decreased markedly as compared to the SrS:Ce device. Emission colors of the devices were altered only slightly due to selenium addition.     

Photoluminescence excitation spectroscopy of GaP1−xNx alloys: conduction-band-edge formation by nitrogen incorporation

We have investigated the conduction-band-edge formation in GaP_1−xN_x alloys by nitrogen incorporation into GaP using photoluminescence excitation (PLE) spectroscopy. The PLE spectra of GaP_1−xN_x alloys with various nitrogen concentrations show that the absorption edge shifts to lower energies with increasing nitrogen concentration. From the nitrogen concentration dependence of the absorption edge energy we found that the conduction-band-edge formation in GaP_1−xN_x alloys originates from the formation of the A line.     

Phonon behavior and interfacial stress in the strained (InAs)m/(GaAs)n ultrathin superlattices

Phonon behavior in the strained (InAs)_m/(GaAs)_n ultrathin superlattices grown by molecular beam epitaxy has been investigated by means of Raman scattering spectroscopy. The phonon frequency in the GaAs layers shifts toward lower energy with increasing InAs layer thickness under fixed thickness of GaAs layers. The frequency in the InAs layers does not change significantly, as deduced from the behavior of the InAs-like mode in In_xGa_1−xAs alloys. These observed results are phenomenologically discussed on the basis of the combined effect of phonon confinement in the respective layer and stress at the alternating interfaces. Furthermore, a large softening of the phonon confined in the GaAs layers decreases the frequency gap, resulting in traveling of the optical phonons confined in both layers. The strain at the interfaces is estimated by an empirical method, i.e., by comparing the frequency in the superlattice and in the alloy of equivalent composition. In the In_xGa_1−xAs alloys, the composition dependence of the mode frequency is considered as being due to the local strain. The group III elements are considered to be in the local strain state from an extended X-ray absorption fine structure (EXAFS) analysis.     

Cd1−xZnxTe: Growth and characterization of crystals for X-ray and gamma-ray detectors

The choice a suitable crystal growth method and a reasonable x value is of profound importance in the preparation of high quality Cd_1−xZn_xTe crystals for x-ray and gamma-ray detectors. The present paper reviews the evolution and development of Cd_1−xZn_xTe crystal growth for x-ray and gamma-ray detectors. At the same time, emphasis is put upon finding the relationship between the x value and the quality of the Cd_1−xZn_xTe. Three sets of Cd_1−xZn_xTe ingots with different x values, specifically 0.10, 0.15, and 0.20 were grown by the vertical Bridgman method (VBM) and characterized. Their x specification was then correlated with their dislocation densities, Te precipitates, inclusions, IR transmission, resistivities, and impurity concentrations, respectively. It was found that VBM Cd_0.85Zn_0.15Te as grown in this paper possessed the best choice of qualities with respect to defects and impurities.     

Compositional dependence of the optical gap in Ge1−xSx, Ge40−xSbxS60 and (As2S3)x(Sb2S3)1−x non-crystalline systems

An attempt is made to calculate the compositional dependence of the optical gap (E_g) in Ge_1−xS_x, Ge_40−xSb_xS₆₀ and (As₂S₃)_x(Sb₂S₃)_1−x non-crystalline systems in an alloy-like approach. From the comparison of both the experimental dependence of E_g and the calculated ones using the Shimakawa relation [E_{g AB} = YE_{g A} + (1−Y)E_{g B}] it is assumed that this equation is useful for such systems or parts of the systems which behave like almost ideal solutions.     

Atomic structure of Al55(Cr1−xMnx)15Si30 metallic glasses observed by neutron diffraction

An atomic structure of Al₅₅(Cr_1−xMn_x)₁₅Si₃₀ (x = 0, 0.49,1) metallic glasses was studied by neutron diffraction. An advantage of the neutron diffraction technique was fully exploited by utilizing the negative scattering length of Mn to form a neutron zero scattering ‘alloy’ for the component Cr_0.51Mn_0.49 in this quaternary Al---(Cr, Mn)---Si alloy. This allows the atomic distribution of the resulting quasibinary Al---Si metallic glass to be derived directly. Moreover, the (Al, Si)---TM (TM = Mn, Cr) and TM---TM pair correlations were also extracted by taking appropriate linear combinations of the atomic structures for the Al₅₅(Cr_1−xMn_x)₁₅Si₃₀ (x = 0, 0.49, 1) metallic glasses. A sharp first peak in the (Al,Si) ---TM pair correlations thus obtained led to the conclusion that a strong attractive interaction exists between (Al, Si) and TM atoms and, hence, that the presence of the TM atoms is responsible for the formation of an amorphous phase.     

Growth of Cu(AlxGa1−x)SSe pentenary alloy crystals by iodine chemical vapor transport method

Single crystals of Cu(Al_xGa_1−x)SSe pentenary alloys were successfully grown by the vapor transport technique using iodine as a transport agent. Systematic measurements of the basic crystal properties were carried out using powder X-ray, photoluminescence (PL), photoreflectance (PR), and Van der Pauw methods. Dependence of the lattice constants, exciton transition energies, and PL peak energies on Al composition, x, were examined in detail. The lattice constants obeyed Vegard's law. A quadratic dependence of exciton transition energies on x was found. The broadening parameters in the PR spectrum increase monotonically with increasing x, the results showing that the crystal quality degrades with increasing x. Exciton-related PL peaks were found for 0 ≤ x ≤ 0.77 at 77 K.     

Non-linear As(P) incorporation in GaAs1−yPy on GaAs and InAs1−yPy on InP

We find anion incorporation into both GaAs_1−yP_y on GaAs and InAs_1−yP_y on InP during gas source molecular beam epitaxy (GSMBE) is not linearly related to the hydride gas fluxes within our reactor. The deviation from an ideal model, i.e., y = ƒ_P/(ƒ_P+ƒ_As), where As(P) is the flux of AsH₃ (PH₃), can be as large as a factor of two. GaAsP exhibits the largest degree of nonlinearity and incorporation is found to depend quadratically on the fluxes over a wide range of flux ratio. Significant deviations are also found for InAsP; however, anion incorporation can be modeled with y = ƒ_P/(ƒ_P+βƒ_As).     

Photocurrent measurements on GaAs1−xNx epilayers grown by metalorganic chemical vapor deposition

GaAs_1−xN_x epilayers were grown on a GaAs(0 0 1) substrate by metalorganic chemical vapor deposition. Composition was determined by high resolution X-ray diffraction. Band gap was measured from 77 to 400 K by using photocurrent measurements. The photocurrent spectra show clear near-band-edge peak and their peak energies drastically decrease with increasing nitrogen composition due to band gap bowing in the GaAs_1−xN_x epilayers. Those red shifts were particularly notable for low nitrogen compositions. However, the shifts tended to saturate when the nitrogen composition become higher than 0.98%. When the nitrogen composition is in the range 1.68–3.11%, the measured temperature dependence of the energy band gap was nicely fitted. However, the properties for the nitrogen composition range 0.31–0.98% could not be fitted with a single fitting model. This result indicates that the bowing parameter reaches 25.39 eV for low nitrogen incorporation (x=0.31%), and decreases with increasing nitrogen composition.     

Electrical resistivity of amorphous Fe90-xCoxZr10 alloys: Weak localization and spin fluctuation effects

The results of electrical resistivity () measurements performed on amorphous Fe_90-xCo_xZr₁₀ alloys in the temperature range 77 K to 350 K are presented and discussed in the light of existing theoretical models. Besides unambiguously identifying weak localization, electron-phonon scattering, electron-magnon scattering and scattering of conduction electrons from spin fluctuations as main mechanisms governing the temperature dependence of within the temperature range covered in this work, the present results demonstrate that inelastic scattering of electrons from longitudinal phonons provides the most effective dephasing mechanism. Weak localization effects basically account for the negative temperature coefficient of observed for temperatures below the minimum and the inelastic scattering time or dephasing time increases rapidly with Co concentration. Spin fluctuation effects show up clearly for temperatures in the vicinity of the Curie temperature through a contribution to (T) which varies with temperature as . That spin fluctuations get suppressed by Co substitution is strongly indicated by a continuous decline of the coefficient of the term with increasing Co concentration.     

Elastic constant anomaly in Fe80−xMoxB20 metallic glasses

The extensional sound velocities V_E of Fe_80−xMo_xB₂₀(x = 6, 7, 8) metallic glasses have been measured between 100 and 600 K in a saturating magnetic field. Young's modulus (E = _E², = density) shows anomalous temperature dependence at and below the magnetic transition temperature of each glass studied. These anomalies are interpreted as arising from the change of long-range spin coupling energy at the Curie temperature in a molecular field approximation. Comparison is made with similar effects in other crystalline and non-crystalline magnetic materials.     

The polycarbosilane-to-SixC1−x conversion studied by inelastic neutron scattering and infrared absorption

Polycarbosilane (PC) is a precursor which is converted to Si_xC_1−x fibers by pyrolysis in an inert gas atmosphere. The changes in the atomic vibrational spectrum during the conversion process from PC to Si_xC_1−x have been examined by means of inelastic neutron scattering (INS) and infrared absorption (IR). The existence of transverse-optical(TO)- and longitudinal-optical(LO)-like phonon modes due to amorphous SiC clusters was established in the original and pyrolyzed PC by INS measurements. After pyrolyzing at 700–800°C, these modes appear distinctly around 730 and 930 cm⁻¹, respectively, in the INS spectra. Pyrolysis at 1000°C makes these TO- and LO-like phonon modes sharper.     

Electronic traps in mixed Si1−xGexO2 films

Thermally stimulated luminescence (TSL) and infrared (IR) spectroscopy were measured in plasma grown Si_1−xGe_xO₂ (x=0, 0.08, 0.15, 0.25, 0.5) with different thicknesses (12–40 nm). A comparison with the TSL properties of thermally grown SiO₂ and GeO₂ was also performed. A main IR absorption structure was detected, due to the superposition of the peaks related to the asymmetric O stretching modes of (i) Si–O–Si (at ≈1060 cm⁻¹) and (ii) Si–O–Ge (at 1001 cm⁻¹). Another peak at ≈860 cm⁻¹ was observed only for Ge concentrations, x>0.15, corresponding to the asymmetric O stretching mode in Ge–O–Ge bonds. A TSL peak was observed at 70°C, and a smaller structure at around 200°C. The 70°C peak was more intense in all Ge rich layers than in plasma grown SiO₂. Based on the thickness dependence of the signal intensity we propose that at Ge concentrations 0.25x0.5 TSL active defects are localised at interfacial regions (oxide/semiconductor, Ge poor/Ge rich internal interface, oxide external surface/atmosphere). Based on similarities between TSL glow curves in plasma grown Si_1−xGe_xO₂, thermally grown GeO₂ and SiO₂ we propose that oxygen vacancy related defects are trapping states in Si_1−xGe_xO₂ and GeO₂.     

X-ray scattering studies of the short and medium range ordering in AsxTe1−x glasses

The structures of As_xTe_1−x(x = 0.2, 0.4, and 0.5) glasses are studied using the differential X-ray anomalous scattering technique. The partial distribution functions have also been obtained for the stoichiometric As₂Te₃ glass, giving information on the medium range ordering. All the glasses show chemical disorder to differing extents, the As₂Te₃ glass being the most disordered. The Te coordination number undergoes a change at x=0.4 where it is 2.5 compared with 2 for AsTe. This change indicates the existence of about 50% of threefold Te sites in the stoichiometric glass, as well as in the Te-rich glasses. Some of the physical properties of the glasses may be explained based on these results.     

Compositional control of CdxZn1−xSe grown by photoassisted organometallic vapor phase epitaxy

The photoassisted OMVPE growth technique is important for the fabrication of blue/green laser diodes based on Cd_xZn_1−xSe quantum wells. Low temperature growth with photoassistance is key to the fabrication of these devices, however, the compositional control of Cd_xZn_1−xSe becomes increasingly difficult as the growth temperature is reduced. We have studied the compositional control of Cd_xZn_1−xSe using the sources DMCd, DMZn, and DMSe, with irradiation from a Hg arc lamp. We studied the dependence of the composition on the growth temperature, irradiation intensity, and source mass flows. The composition x increases with increasing temperature and decreases with increasing irradiation intensity. The solid-phase composition is a non-linear function of the gas-phase composition X. The slope of this characteristic, dx/dX, should be minimized for good compositional control. At 475°C without photoassistance, dx/dX is 1.75 near a composition of 20%, as determined from the data of Parbrook et al. Decreasing the temperature increases dx/dX. At 370°C with 12 mW/cm², dx/dX ≈ 13 and at 350°C with 58 mW/cm² dx/dX ≈ 60. We have investigated this behavior at 370°C with 12 mW/cm² irradiation by studying both the composition and the growth rate as a function of the gas-phase composition. The growth rate is non-monotonic, and is minimum for a gas-phase composition of 0.20. The behavior is quite complex, and is not fully understood at the present time. Nonetheless, our results indicate that the Cd-bearing precursor is adsorbed much more strongly than the Zn-bearing precursor. In addition to this, the introduction of the DMCd strongly inhibits the growth of ZnSe. We have achieved sufficiently good compositional control at 370°C and 12 mW/cm² to grow ZnSe/Cd_xZn_1−xSe/ZnSe multiple quantum well structures. More work is necessary in order to clarify the roles of irradiation intensity and VI/II ratio so that good compositional control can be achieved at lower growth temperatures.     

Boron-doped a-SiOx:H films prepared by photo-CVD technique

The optoelectronic and structural properties of p-type a-SiO_x:H films have been studied. The deposition parameters e.g. chamber pressure and diborane to silane ratio are optimized to get a film with dark conductivity (σ_d) 7.9×10⁻⁶ S cm⁻¹ and photoconductivity 9.3×10⁻⁶ S cm⁻¹ for an optical gap (E₀₄) of 1.94 eV. The decrease of optical gap accompanied by the increase of conductivity is due to less oxygen incorporation in the film, which is substantiated by the decrease of the intensity of SiO absorption spectra. The properties are very much effected by the chamber pressure and diborane to silane ratio.     

High carbon doping of Ga1−xInxAs (x≈0.01) grown by molecular beam epitaxy

We have grown layers of Ga_1−xIn_xAs:C (x ≈ 0.01) on (100) GaAs by molecular beam epitaxy. As C source a graphite filament was used. Structures coherent with the substrate were obtained by adjusting properly the In and C concentrations. With simultaneous incorporation of In and C the strain is compensated and, consequently, the defect density is reduced. A maximum hole concentration value of p = 6×10¹⁹ cm⁻³ was achieved, which is twice higher than the saturation value of C doping of GaAs produced under the same conditions. There is evidence that this value is not in the saturation limit. The product of the hole density times the mobility increases, so the resistance decreases with higher C doping. Raman spectra show that the C_As peak broadens and shifts to lower frequencies for increasing concentration of indium. In H-passivated samples, Raman spectroscopy shows that C_As is surrounded by Ga atoms only. Indium atoms are thus present only in the second group III shell.     

MBE growth of cubic AlyGa1−yN/GaN heterostructures—structural, vibrational and optical properties

Cubic Al_yGa_1−yN/GaN heterostructures on GaAs(0 0 1) substrates were grown by radio-frequency plasma-assisted molecular beam epitaxy. High resolution X-ray diffraction, micro-Raman, spectroscopic ellipsometry, and cathodoluminescence measurements were used to characterize the structural, optical and vibrational properties of the Al_yGa_1−yN epilayers. The AlN mole fraction y of the alloy was varied between 0.07<y<0.20. X-ray diffraction reciprocal space maps demonstrate the good crystal quality of the cubic Al_yGa_1−yN films. The measured Raman shift of the phonon modes of the Al_yGa_1−yN alloy was in excellent agreement with theoretical calculations. Both SE and CL of the Al_yGa_1−yN epilayer showed a linear increase of the band gap with increasing Al-content.     

Anomalous behavior of excess energy curves of InxGa1−xN grown on GaN and InN

We worked out the excess energies for bulk In_xGa_1−xN and In_xGa_1−xN thin films on GaN and InN in order to investigate their thermodynamic stabilities. It has been found that the excess energy maximum shifted toward x0.80 for InGaN/GaN and x0.10 for InGaN/InN due to the lattice constraint in contrast with x0.50 for bulk. Moreover, it has been revealed that the excess energy for InGaN/GaN is larger than that for bulk at x>0.65. This suggests that In-rich films are less stable on GaN than bulk state. These results indicate that the lattice constraint has a significant influence on thermodynamic stabilities of thin films.