This study reports a series of novel amino acid based dual‐responsive hydrogels. Prepared by a facile one‐pot 1‐ethyl‐3‐(3‐dimethylaminopropyl)carbodiimide (EDC) coupling reaction, the solid content, structure, and mechanical behavior of hydrogels could be easily adjusted by changing the concentrations of the polymers and the crosslinkers. With pH‐responsive anionic pseudo‐peptides as backbones and disulfide‐containing l ‐cystine dimethyl ester as crosslinkers, these hydrogels are able to collapse and form relatively compact structure at an acidic pH, while swelled and partly dissociated at a neutral pH. Further addition of dithiothreitol (DTT) facilitated complete degradation of hydrogels. The high loading efficiency, rapid but complete triggered‐release, and good biocompatibility make these hydrogels promising candidates for oral delivery.
Poly (ethylene glycol) (PEG) based hydrogels have been widely used in many biomedical applications such as regenerative medicine due to their good biocompatibility and negligible immunogenicity. However, bioactivation of PEG hydrogels, such as conjugation of bioactive biomolecules, is usually necessary for cell‐related applications. Such biofunctionalization of PEG hydrogels generally involves complicated and time‐consuming bioconjugation procedures. Herein, we describe the facile preparation of bioactive nanocomposite PEG hydrogel crosslinked by the novel multifunctional nanocrosslinkers, namely polydopamine‐coated layered double hydroxides (PD‐LDHs). The catechol‐rich PD‐LDH nanosheets not only act as effective nanocrosslinkers reinforcing the mechanical strength of the hydrogel, but also afford the hydrogels with robust bioactivity and bioadhesion via the cortical‐mediated couplings. The obtained nanocomposite PEG hydrogels with the multifunctional PD‐LDH crosslinking domains show tunable mechanical properties, self‐healing ability, and bioadhesion to biological tissues. Furthermore, these hydrogels also promote the sequestration of proteins and support the osteogenic differentiation of human mesenchymal stem cells without any further bio‐functionalization. Such facile preparation of bioactive and bioadhesive PEG hydrogels have rarely been achieved and may open up a new avenue for the design of nanocomposite PEG hydrogels for biomedical applications.
Adhesion and proliferation of cells are often suppressed in rigid hydrogels as gel stiffness induces mechanical stress to embedded cells. Herein, the composite hydrogel systems to facilitate high cellular activities are described, while maintaining relatively high gel stiffness. This unusual property is obtained by harmonizing gelatin‐poly(ethylene glycol)‐tyramine (GPT, semisynthetic polymer) and gelatin‐hydroxyphenyl propionic acid conjugates (GH, natural polymer) into hydrogels. A minimum GH concentration of 50% is necessary for cells to be proliferative. GPT is utilized to improve biological stability (>1 week) and gelation time (<20 s) of the hydrogels. These results suggest that deficiency in cellular activity driven by gel stiffness could be overcome by finely tuning the material properties in the microenvironments.
A stable polymeric network that mimics the highly polyanionic extracellular cartilage matrix still remains a great challenge. The main aim of this study is to present the synthesis of dendritic polyglycerol sulfate (dPGS)‐based in situ forming hydrogels using strain promoted azide‐alkyne cycloaddition reactions. A real time rheological study has been used to characterize the hydrogel properties. The viability of encapsulated human chondrocytes in the different hydrogels are monitored using live‐dead staining. Furthermore, type I and II collagen gene have been analyzed. Hydrogels with elastic moduli ranging from 1 to 5 kPa have been prepared by varying the dPGS amount. The chondrocyte viability in dPGS hydrogels is found to be higher than in pure PEG and alginate‐based hydrogels after 21 d. The higher cell viability in the dPGS engineered hydrogels can be explained by the fact that dPGS can interact with different proteins responsible for cell growth and proliferation.
Chondrocyte‐seeded, photo‐cross‐linked hydrogels prepared from solutions containing 50% mass fractions of methacrylated glycol chitosan or methacrylated hyaluronic acid (MHA) with methacrylated chondroitin sulfate (MCS) are cultured in vitro under static conditions over 35 d to assess their suitability for load‐bearing soft tissue repair. The photo‐cross‐linked hydrogels have initial equilibrium moduli between 100 and 300 kPa, but only the MHAMCS hydrogels retain an approximately constant modulus (264 ± 5 kPa) throughout the culture period. Visually, the seeded chondrocytes in the MHAMCS hydrogels are well distributed with an apparent constant viability in culture. Multicellular aggregates are surrounded by cartilaginous matrix, which contain aggrecan and collagen II. Thus, co‐cross‐linked MCS and MHA hydrogels may be suited for use in an articular cartilage or nucleus pulposus repair applications.
Polyelectrolyte block copolymer micelles assembled thin film is switched in response to local photocatalytic reactions on titanium dioxide, resulting in a layer of variable height, stiffness in response to visible light irradiation. Preosteoblasts migrate toward stiffer side of the substrates.
The aim of this study is to design a polymeric nanogel system with tailorable degradation behavior. To this end, hydroxyethyl methacrylate‐oligoglycolates‐derivatized poly(hydroxypropyl methacrylamide) (pHPMAm‐Gly‐HEMA) and hydroxyethyl methacrylamide‐oligoglycolates‐derivatized poly(hydroxyethyl methacrylamide) (pHEMAm‐Gly‐HEMAm) are synthesized and characterized. pHEMAm‐Gly‐HEMAm shows faster hydrolysis rates of both carbonate and glycolate esters than the same ester groups of pHPMAm‐Gly‐HEMA. pHEMAm‐Gly‐HEMAm nanogels have tailorable degradation kinetics from 24 h to more than 4 d by varying their crosslink densities. It is shown that the release of a loaded macromolecular model drug is controlled by degradation of nanogels. The nanogels show similar cytocompatibility as PLGA nanoparticles and are therefore considered to be attractive systems for drug delivery.
A visible light and pH responsive anticancer drug delivery system based on polymer‐coated mesoporous silica nanoparticles (MSNs) has been developed. Perylene‐functionalized poly(dimethylaminoethyl methacrylates) sensitive to visible light and pH are electrostatically attached on the surface of MSNs to seal the nanopores. Stimulation of visible light and acid can unseal the nanopores to induce controlled drug release from the MSNs. More interestingly, the release can be enhanced under the combined stimulation of the dual‐stimuli. The synergistic effect of visible light and acid stimulation on the efficient release of anticancer drugs from the nanohybrids endows the system with great potential for cancer therapy.
Reactive oxygen species (ROS) play important roles in cell signaling pathways, while increased production of ROS may disrupt cellular homeostasis, giving rise to oxidative stress and a series of diseases. Utilizing these cell‐generated species as triggers for selective tuning polymer structures and properties represents a promising methodology for disease diagnosis and treatment. Recently, significant progress has been made in fabricating biomaterials including nanoparticles and macroscopic networks to interact with this dynamic physiological condition. These ROS‐responsive platforms have shown potential in a range of biomedical applications, such as cancer targeted drug delivery systems, cell therapy platforms for inflammation related disease, and so on.
Horseradish peroxidase (HRP) and hydrogen peroxide (H2O2)‐mediated crosslinking reaction has become an attractive method to create in situ forming hydrogels. While the crosslinking system has been widely utilized, there are certain issues require improvement to extend their biomedical applications, including creation of stiff hydrogels without compromising cytocompatibility due to initially high concentrations of H2O2. A gelatin‐based hydrogels formed through a dual enzyme‐mediated crosslinking reaction using HRP and glucose oxidase (GOx) as an H2O2‐generating enzyme to gradually supply a radical source in HRP‐mediated crosslinking reaction is reported. The physicochemical properties can be controlled by varying enzyme concentrations. Furthermore the hydrogel matrices provide 3D microenvironments for supporting the growth and spreading of human dermal fibroblasts with minimized cytotoxicity, despite the cells being encapsulated within stiff hydrogels. These hydrogels formed with HRP/GOx have great potential as artificial microenvironments for a wide range of biomedical applications.
Furoxans, or 1,2,5‐oxadiazole‐N‐oxides, are a class of nitric oxide (NO)‐donating compounds that release NO in response to thiol‐containing molecules. In this study, polymeric micelles bearing furoxan moieties are prepared from an amphiphilic block copolymer consisting of a hydrophobic furoxan‐bearing block and a hydrophilic poly(N‐acryloylmorpholine) block. The block copolymer is prepared using a combination of the reversible addition–fragmentation chain transfer polymerization and the copper‐catalyzed Huisgen cycloaddition techniques. The block copolymers form spherical micelles with a diameter of 50 nm by self‐assembly in water. The micelles release NO in response to cysteine and show improved stability against hydrolytic decomposition. Furthermore, the micelles show a synergistic anti‐proliferative effect with ibuprofen in human colon cancer cells.
In order to construct unique polypeptide architectures, a novel telechelic‐type initiator with two leucine ethyl ester units is designed for chemoenzymatic polymerization. Glycine or alanine ethyl ester is chemoenzymatically polymerized using papain in the presence of the initiator, and the propagation occurs at each leucine ethyl ester unit to produce the telechelic polypeptide. The formation of the telechelic polypeptides is confirmed by 1H NMR and MALDI‐TOF mass spectroscopies. It is revealed by AFM observation that long nanofibrils are formed from the telechelic polyalanine, whereas a conventional linear polyalanine with a similar degree of polymerization shows granule‐like structures. The telechelic polyglycine and polyalanine show the crystalline structures of Polyglycine II and antiparallel β‐sheet, respectively. It is demonstrated that this method to synthesize telechelic‐type polypeptides potentially opens up a pathway to construct novel hierarchical structures by self‐assembly.
A polyzwitterion is synthesized by regioselective functionalization of cellulose possessing a uniform charge distribution. The positively charged ammonium group is present at position 6, while the negative charge of carboxylate is located at positions 2 and 3 of the repeating unit. The molecular structure of the biopolymer derivative is proved by NMR spectroscopy. This cellulose‐based zwitterion is applied to several support materials by spin‐coating and characterized by means of atomic force microscope, contact angle measurements, ellipsometry, and X‐ray photoelectron spectroscopy. The coatings possess antimicrobial activity depending on the support materials (glass, titanium, tissue culture poly(styrene)) as revealed by confocal laser scanning microscopy and live/dead staining.
Targeting nanoparticles for drug delivery has great potential for improving efficacy and reducing side effects from systemic toxicity. New developments in the assembly of materials afford the opportunity to expose cryptic targeting domains in tissue‐specific microenvironments in which certain proteases are expressed. Here, recombinant proteins are designed to combine the responsiveness to environmental proteases with specific targeting. Materials made recombinantly allow complete control over amino acid sequence, in which each molecule is identically functionalized. Previously, oleosin, a naturally occurring plant protein that acts as a surfactant, has been engineered to self‐assemble into spherical micelles—a useful structure for drug delivery. To make oleosins that are locally activated to bind receptors, oleosin is genetically modified to incorporate the integrin‐binding motif RGDS just behind a domain cleavable by thrombin. The resulting modified oleosin self‐assembles into spherical micelles in aqueous environments, with the RGDS motif protected by the thrombin‐cleavable domain. Upon the addition of thrombin, the RGDS is exposed and the binding of the spherical micelles to breast cancer cells is increased fourfold.
As a biomaterial, it is well established that gelatin exhibits low cytotoxicity and can promote cellular growth. However, to circumvent the potential toxicity of chemical crosslinkers, reagent‐free crosslinking methods such as electron irradiation are highly desirable. While high energy irradiation has been shown to exhibit precise control over the degree of crosslinking, these hydrogels have not been thoroughly investigated for biocompatibility and degradability. Here, NIH 3T3 murine fibroblasts are seeded onto irradiated gelatin hydrogels to examine the hydrogel's influence on cellular viability and morphology. The average projected area of cells seeded onto the hydrogels increases with irradiation dose, which correlates with an increase in the hydrogel's shear modulus up to 10 kPa. Cells on these hydrogels are highly viable and exhibits normal cell cycles, particularly when compared to those grown on glutaraldehyde crosslinked gelatin hydrogels. However, proliferation is reduced on both types of crosslinked samples. To mimic the response of the hydrogels in physiological conditions, degradability is monitored in simulated body fluid to reveal strongly dose‐dependent degradation times. Overall, given the low cytotoxicity, influence on cellular morphology and variability in degradation times of the electron irradiated gelatin hydrogels, there is significant potential for application in areas ranging from regenerative medicine to mechanobiology.
Healing of tendon ruptures represents a major challenge in musculoskeletal injuries and combinations of biomaterials with biological factors are suggested as viable option for improved healing. The standard approach of repair by conventional suture leads to incomplete healing or rerupture. Here, a new elastic type of DegraPol® (DP), a polyester urethane, is explored as a delivery device for platelet‐derived growth factor—BB (PDGF‐BB) to promote tendon healing. Using emulsion electrospinning as an easy method for incorporation of biomolecules within polymers, DegraPol® supports loading and release of PDGF‐BB. Morphological, mechanical and delivery device properties of the bioactive DP scaffolds, as well as differences arising due to different electrospinning parameters are studied. Emulsion electrospun DP scaffolds result in thinner fibers than pure DP scaffolds and experience decreased strain at break [%], but high enough for successful surgeon handling. PDGF‐BB is released in a sustained manner from emulsion electrospun DP, but not completely, with still large amount of it being inside the polymeric fibers after 30 d. In vitro studies show that the bioactive scaffolds promote tenocyte proliferation in serum free and serum+ conditions, demonstrating the potential of this surgeon‐friendly bioactive delivery device to be used for tendon repair.
A bioinspired adhesive material, polydopamine (pDA), was employed as an interfacial glue to stably immobilize human neural stem cells (hNSCs) on the external surface of biodegradable polycaprolactone (PCL) microspheres, thereby serving as versatile key systems that can be used for cell carriers. The pDA decoration on the PCL microspheres has been resulted in robust hNSC immobilization as well as proliferation on their curved surfaces. The pDA coating has transformed the hydrophobic PCL systems toward water‐friendly and sticky characteristics, thereby resulting in full dispersion in aqueous solution and stable adherence onto a wet biological surface. Adeno‐associated virus, a safe gene vector capable of effectively regulating cell behaviors, can be decorated on the PCL surfaces and delivered efficiently to hNSCs adhered to the microsphere exteriors. These distinctive multiple benefits of the sticky pDA microspheres can provide core technologies that can boost the therapeutic effects of cell therapy approaches.
An efficiently siRNA transporting nanocarrier still remains to be developed. In this study, utilizing the dual stimulus of acid tumor extracellular environment and redox effect of glutathione in the cytosol, a new siRNA transporting system combining triple effects of folate targeting, acid sensitive polymer micelles, and bio‐reducible disulfide bond linked siRNA‐cell penetrating peptides (CPPs) conjugate is developed to suppress c‐myc gene expression of breast cancer (MCF‐7 cells) both in vitro and in vivo. Subsequent research demonstrates that the vesicle has particle size of about 100 nm and siRNA entrapment efficiency of approximately 80%. In vitro studies verified over 90% of encapsulated siRNA‐CPPs can be released and the vesicle shows higher cellular uptake in response to the tumorous zone. Determination of gene expression at both mRNA and protein levels indicates the constructed vesicle exhibited enhanced cancer cell apoptosis and improved therapeutic efficacy in vitro and in vivo.
Amphiphilic triblock copolymers mPEG‐b‐PMAC‐b‐PCL are synthesized using methoxyl poly(ethylene glycol), cyclic carbonic ester monomer including acryloyl group, and ε‐caprolactone. Copolymers are self‐assembled into core–shell micelles in aqueous solution. Thiolated hemoglobin (Hb) is conjugated with micelles sufficiently through thiol Michael addition reaction to form hemoglobin nanoparticles (HbNs) with 200 nm in diameter. The conjugation of Hb onto the micelle surface is further confirmed by X‐ray photoelectron spectroscopy. Feeding ratio of copolymer micelles to Hb at 1:3 would lead to the highest hemoglobin loading efficiency 36.7 wt%. The UV results demonstrate that the gas transporting capacity of HbNs is well remained after Hb is conjugated with polymeric micelles. Furthermore, the obtained HbNs have no obvious detrimental effects on blood components in vitro. This system may thus have great potential as one of the candidates to be developed as oxygen carriers and provide a reference for the modification of protein drugs.
Electrically conductive biomaterials that can efficiently deliver electrical signals to cells or improve electrical communication among cells have received considerable attention for potential tissue engineering applications. Conductive hydrogels are desirable particularly for neural applications, as they can provide electrical signals and soft microenvironments that can mimic native nerve tissues. In this study, conductive and soft polypyrrole/alginate (PPy/Alg) hydrogels are developed by chemically polymerizing PPy within ionically cross‐linked alginate hydrogel networks. The synthesized hydrogels exhibit a Young's modulus of 20–200 kPa. Electrical conductance of the PPy/Alg hydrogels could be enhanced by more than one order of magnitude compared to that of pristine alginate hydrogels. In vitro studies with human bone marrow‐derived mesenchymal stem cells (hMSCs) reveal that cell adhesion and growth are promoted on the PPy/Alg hydrogels. Additionally, the PPy/Alg hydrogels support and greatly enhance the expression of neural differentiation markers (i.e., Tuj1 and MAP2) of hMSCs compared to tissue culture plate controls. Subcutaneous implantation of the hydrogels for eight weeks induces mild inflammatory reactions. These soft and conductive hydrogels will serve as a useful platform to study the effects of electrical and mechanical signals on stem cells and/or neural cells and to develop multifunctional neural tissue engineering scaffolds.
下载免费PDF全文