Adhesion and proliferation of cells are often suppressed in rigid hydrogels as gel stiffness induces mechanical stress to embedded cells. Herein, the composite hydrogel systems to facilitate high cellular activities are described, while maintaining relatively high gel stiffness. This unusual property is obtained by harmonizing gelatin‐poly(ethylene glycol)‐tyramine (GPT, semisynthetic polymer) and gelatin‐hydroxyphenyl propionic acid conjugates (GH, natural polymer) into hydrogels. A minimum GH concentration of 50% is necessary for cells to be proliferative. GPT is utilized to improve biological stability (>1 week) and gelation time (<20 s) of the hydrogels. These results suggest that deficiency in cellular activity driven by gel stiffness could be overcome by finely tuning the material properties in the microenvironments.
A visible light and pH responsive anticancer drug delivery system based on polymer‐coated mesoporous silica nanoparticles (MSNs) has been developed. Perylene‐functionalized poly(dimethylaminoethyl methacrylates) sensitive to visible light and pH are electrostatically attached on the surface of MSNs to seal the nanopores. Stimulation of visible light and acid can unseal the nanopores to induce controlled drug release from the MSNs. More interestingly, the release can be enhanced under the combined stimulation of the dual‐stimuli. The synergistic effect of visible light and acid stimulation on the efficient release of anticancer drugs from the nanohybrids endows the system with great potential for cancer therapy.
Using different type of initiators, the antibacterial moieties are introduced at the chain end of poly(L,L‐lactide) (PLLA) and poly(D,D‐lactide) (PDLA), and the thermal properties are simultaneously improved using the stereocomplex approach. The physical interaction of polymers and antibacterial compounds is investigated. The double bonds at the chain end are utilized for the interaction of silver ion; however, the silver ions are not detected after stereocomplexation of PLLA and PDLA. On the other hand, catechin (CT) is selected as an initiator precursor of lactide polymerization, protecting the phenolic hydroxyl groups. The linear PLLA and PDLA are obtained by the initiator, resulting in CT conjugated PLAs at the chain end groups after deprotection of phenolic hydroxyl groups. The antibacterial properties are determined by proliferation tests of staphylococcus aureus. The results suggest that the antibacterial properties of CT modified PLAs are derived from the original CT parts.
Given alginate's contribution to Pseudomonas aeruginosa virulence, it has long been considered a promising target for interventional therapies, which have been performed by using the enzyme alginate lyase. In this work, instead of treating pre‐established mucoid biofilms, alginate lyase is immobilized onto a surface as a preventive measure against P. aeruginosa adhesion. A polydopamine dip‐coating strategy is employed for functionalization of polycarbonate surfaces. Enzyme immobilization is confirmed by surface characterization. Surfaces functionalized with alginate lyase exhibit anti‐adhesive properties, inhibiting the attachment of the mucoid strain. Moreover, surfaces modified with this enzyme also inhibit the adhesion of the tested non‐mucoid strain. Unexpectedly, treatment with heat‐inactivated enzyme also inhibits the attachment of mucoid and non‐mucoid P. aeruginosa strains. These findings suggest that the antibacterial performance of alginate lyase functional coatings is catalysis‐independent, highlighting the importance of further studies to better understand its mechanism of action against P. aeruginosa strains.
A series of pH‐triggered charge‐reversal polyurethane copolymers (PS‐PUs) containing methoxyl‐poly(ethylene glycol) (mPEG), carboxylic acid groups, and piperazine groups is presented in this work. The obtained PS‐PUs copolymers can form into stable micelles at pH 7.4, which response to a narrow pH change (5.5–7.5) and show a tunable pH‐triggered charge‐reversal property. Doxorubicin (DOX) is encapsulated into the PS‐PU micelles as a model drug. The drug release of DOX‐loaded PS‐PU micelles shows an obviously stepped‐up with reducing the pH. Meanwhile, it is found that the charge‐reversal property can improve the cellular uptake behavior and intracellular drug release in both HeLa cells and MCF‐7 cells. Additionally, the time‐dependent cytotoxicity of the DOX‐loaded PS‐PU micelles is confirmed by MTT assay. Attributed to the tunable charge‐reversal property through changing the molar ratio of piperazine/carboxyl, the PS‐PU micelles will be a potential candidate as an intelligent drug delivery system in future studies.
Three‐dimensional hydrogel supports for mesenchymal and neural stem cells (NSCs) are promising materials for tissue engineering applications such as spinal cord repair. This study involves the preparation and characterization of superporous scaffolds based on a copolymer of 2‐hydroxyethyl and 2‐aminoethyl methacrylate (HEMA and AEMA) crosslinked with ethylene dimethacrylate. Ammonium oxalate is chosen as a suitable porogen because it consists of needle‐like crystals, allowing their parallel arrangement in the polymerization mold. The amino group of AEMA is used to immobilize RGDS and SIKVAVS peptide sequences with an N‐γ‐maleimidobutyryloxy succinimide ester linker. The amount of the peptide on the scaffold is determined using 125I radiolabeled SIKVAVS. Both RGDS‐ and SIKVAVS‐modified poly(2‐hydroxyethyl methacrylate) scaffolds serve as supports for culturing human mesenchymal stem cells (MSCs) and human fetal NSCs. The RGDS sequence is found to be better for MSC and NSC proliferation and growth than SIKVAVS.
Photo‐crosslinking and self‐healing have received considerable attention for the design of intelligent materials. A novel photostimulated, self‐healing, and cytocompatible hydrogel system is reported. A coumarin methacrylate crosslinker is synthesized to modify the polyacrylamide‐based hydrogels. With the [2+2] cyclo‐addition of coumarin moieties, the hydrogels exhibit excellent self‐healing capacity when they are exposed to light with wavelengths at 280 and 365 nm, respectively. To enhance cell compatibility, a poly (amidoamine) crosslinker is also synthesized. Variations in light exposure times and irradiation wavelengths are found to alter the self‐healing property of the hydrogels. The hydrogels are shown to induce a regular cellular pattern. The hydrogels are used to regulate bone marrow stromal cells differentiation. The relative mRNA expressions are recorded to monitor the osteogenic differentiation of the cells.
A bioinspired adhesive material, polydopamine (pDA), was employed as an interfacial glue to stably immobilize human neural stem cells (hNSCs) on the external surface of biodegradable polycaprolactone (PCL) microspheres, thereby serving as versatile key systems that can be used for cell carriers. The pDA decoration on the PCL microspheres has been resulted in robust hNSC immobilization as well as proliferation on their curved surfaces. The pDA coating has transformed the hydrophobic PCL systems toward water‐friendly and sticky characteristics, thereby resulting in full dispersion in aqueous solution and stable adherence onto a wet biological surface. Adeno‐associated virus, a safe gene vector capable of effectively regulating cell behaviors, can be decorated on the PCL surfaces and delivered efficiently to hNSCs adhered to the microsphere exteriors. These distinctive multiple benefits of the sticky pDA microspheres can provide core technologies that can boost the therapeutic effects of cell therapy approaches.
Electrospun poly‐l ‐lactic acid (PLLA) nanofiber mats carrying surface amine groups, previously introduced by nitrogen atmospheric pressure nonequilibrium plasma, are embedded into aqueous solutions of oligomeric acrylamide‐end capped AGMA1, a biocompatible polyamidoamine with arg‐gly‐asp (RGD)‐reminiscent repeating units. The resultant mixture is finally cured giving PLLA‐AGMA1 hydrogel composites that absorb large amounts of water and, in the swollen state, are translucent, soft, and pliable, yet as strong as the parent PLLA mat. They do not split apart from each other when swollen in water and remain highly flexible and resistant, since the hydrogel portion is covalently grafted onto the PLLA nanofibers via the addition reaction of the surface amine groups to a part of the terminal acrylic double bonds of AGMA1 oligomers. Preliminary tested as scaffolds, the composites prove capable of maintaining short‐term undifferentiated cultures of human pluripotent stem cells in feeder‐free conditions.
In order to construct unique polypeptide architectures, a novel telechelic‐type initiator with two leucine ethyl ester units is designed for chemoenzymatic polymerization. Glycine or alanine ethyl ester is chemoenzymatically polymerized using papain in the presence of the initiator, and the propagation occurs at each leucine ethyl ester unit to produce the telechelic polypeptide. The formation of the telechelic polypeptides is confirmed by 1H NMR and MALDI‐TOF mass spectroscopies. It is revealed by AFM observation that long nanofibrils are formed from the telechelic polyalanine, whereas a conventional linear polyalanine with a similar degree of polymerization shows granule‐like structures. The telechelic polyglycine and polyalanine show the crystalline structures of Polyglycine II and antiparallel β‐sheet, respectively. It is demonstrated that this method to synthesize telechelic‐type polypeptides potentially opens up a pathway to construct novel hierarchical structures by self‐assembly.
Amphiphilic triblock copolymers mPEG‐b‐PMAC‐b‐PCL are synthesized using methoxyl poly(ethylene glycol), cyclic carbonic ester monomer including acryloyl group, and ε‐caprolactone. Copolymers are self‐assembled into core–shell micelles in aqueous solution. Thiolated hemoglobin (Hb) is conjugated with micelles sufficiently through thiol Michael addition reaction to form hemoglobin nanoparticles (HbNs) with 200 nm in diameter. The conjugation of Hb onto the micelle surface is further confirmed by X‐ray photoelectron spectroscopy. Feeding ratio of copolymer micelles to Hb at 1:3 would lead to the highest hemoglobin loading efficiency 36.7 wt%. The UV results demonstrate that the gas transporting capacity of HbNs is well remained after Hb is conjugated with polymeric micelles. Furthermore, the obtained HbNs have no obvious detrimental effects on blood components in vitro. This system may thus have great potential as one of the candidates to be developed as oxygen carriers and provide a reference for the modification of protein drugs.
For the design of a biohybrid structure as a ligand‐tailored drug delivery system (DDS), it is highly sophisticated to fabricate a DDS based on smoothly controllable conjugation steps. This article reports on the synthesis and the characterization of biohybrid conjugates based on noncovalent conjugation between a multivalent biotinylated and PEGylated poly(amido amine) (PAMAM) dendrimer and a tetrameric streptavidin‐small protein binding scaffold. This protein binding scaffold (SA‐ABDwt) possesses nM affinity toward human serum albumin (HSA). Thus, well‐defined biohybrid structures, finalized by binding of one or two HSA molecules, are available at each conjugation step in a controlled molar ratio. Overall, these biohybrid assemblies can be used for (i) a controlled modification of dendrimers with the HSA molecules to increase their blood‐circulation half‐life and passive accumulation in tumor; (ii) rendering dendrimers a specific affinity to various ligands based on mutated ABD domain, thus replacing tedious dendrimer–antibody covalent coupling and purification procedures.
A series of novel pH‐sensitive gene delivery vectors (POEI 1, 2, and 3) are synthesized through Michael addition from low molecular weight PEI (LMW PEI) via acid‐labile ortho ester linkage with terminal acrylates (OEAc) by various feed molar ratios. The obtained POEI 1 and POEI 2 can efficiently condense plasmid DNA into nanoparticles with size range of 200–300 nm and zeta‐potentials of about +15 mV while protecting DNA from enzymatic digestion compared with POEI 3. Significantly, ortho ester groups of POEI main‐chains can make an instantaneous degradation‐response to acidic endosomal pH (≈5.0), resulting in accelerated disruption of polyplexes and intracellular DNA release. MTT assay reveals that all POEIs exhibit much lower cytotoxicity in different cells than branched PEI (25 KDa). As expected, POEI 1 and POEI 2 perform improved gene transfection in vitro, suggesting that such polycations might be promising gene vectors based on overcoming toxicity‐efficiency contradiction.
A stable polymeric network that mimics the highly polyanionic extracellular cartilage matrix still remains a great challenge. The main aim of this study is to present the synthesis of dendritic polyglycerol sulfate (dPGS)‐based in situ forming hydrogels using strain promoted azide‐alkyne cycloaddition reactions. A real time rheological study has been used to characterize the hydrogel properties. The viability of encapsulated human chondrocytes in the different hydrogels are monitored using live‐dead staining. Furthermore, type I and II collagen gene have been analyzed. Hydrogels with elastic moduli ranging from 1 to 5 kPa have been prepared by varying the dPGS amount. The chondrocyte viability in dPGS hydrogels is found to be higher than in pure PEG and alginate‐based hydrogels after 21 d. The higher cell viability in the dPGS engineered hydrogels can be explained by the fact that dPGS can interact with different proteins responsible for cell growth and proliferation.
Here, postfunctionalization and bioapplication of a π‐conjugated polymer named 4‐[4H‐dithieno(3,2‐b:2′,3′‐d)pyrrol‐4‐yl]aniline (DTP‐aryl‐NH2) are reported, which is successfully synthesized via electropolymerization onto the glassy carbon electrode. Folic acid (FA) is used to modify the amino functional polymer via N‐(3‐dimethylaminopropyl)‐N′‐ethylcarbodiimide hydrochloride/N‐hydroxysuccinimide chemistry for the further steps. The selective adhesion of folate receptor positive cells on the surface is followed by the electrochemical methods. Cyclic voltammetry and electrochemical impedance spectroscopy have been used to characterize stepwise modification of the electroactive surface. After optimization studies such as scan rate during the polymer deposition, FA amount for the efficient surface targeting, incubation time with the cells etc., analytical characterization is carried out. The surface morphologies at each step are imaged by using fluorescence microscopy.
Targeting nanoparticles for drug delivery has great potential for improving efficacy and reducing side effects from systemic toxicity. New developments in the assembly of materials afford the opportunity to expose cryptic targeting domains in tissue‐specific microenvironments in which certain proteases are expressed. Here, recombinant proteins are designed to combine the responsiveness to environmental proteases with specific targeting. Materials made recombinantly allow complete control over amino acid sequence, in which each molecule is identically functionalized. Previously, oleosin, a naturally occurring plant protein that acts as a surfactant, has been engineered to self‐assemble into spherical micelles—a useful structure for drug delivery. To make oleosins that are locally activated to bind receptors, oleosin is genetically modified to incorporate the integrin‐binding motif RGDS just behind a domain cleavable by thrombin. The resulting modified oleosin self‐assembles into spherical micelles in aqueous environments, with the RGDS motif protected by the thrombin‐cleavable domain. Upon the addition of thrombin, the RGDS is exposed and the binding of the spherical micelles to breast cancer cells is increased fourfold.
Chondrocyte‐seeded, photo‐cross‐linked hydrogels prepared from solutions containing 50% mass fractions of methacrylated glycol chitosan or methacrylated hyaluronic acid (MHA) with methacrylated chondroitin sulfate (MCS) are cultured in vitro under static conditions over 35 d to assess their suitability for load‐bearing soft tissue repair. The photo‐cross‐linked hydrogels have initial equilibrium moduli between 100 and 300 kPa, but only the MHAMCS hydrogels retain an approximately constant modulus (264 ± 5 kPa) throughout the culture period. Visually, the seeded chondrocytes in the MHAMCS hydrogels are well distributed with an apparent constant viability in culture. Multicellular aggregates are surrounded by cartilaginous matrix, which contain aggrecan and collagen II. Thus, co‐cross‐linked MCS and MHA hydrogels may be suited for use in an articular cartilage or nucleus pulposus repair applications.
Glycodendrimers based on aromatic cores have an amphiphilic character and have been reported to generate supramolecuar assemblies in water. A new group of glycodendrimers with an aromatic rod‐like core were recently described as potent antagonists of DC‐SIGN‐mediated viral infections. A full characterization of the aggregation properties of these materials is presented here. The results show that these compounds exist mostly as monomers in water solution, in dynamic equilibrium with small aggregates (dimers or trimers). Larger aggregates observed by dynamic light scattering and transmission Electron Microscopy for some of the dendrimers are found to be portions of materials not fully solubilized and can be removed either by optimizing the dissolution protocol or by centrifugation of the samples.
A new synthetic method for the production of artificial magnetosomes, i.e., lipid‐coated vesicles containing magnetic nanoparticles, is demonstrated. Magnetosomes have considerable potential in biomedical and other nanotechnological applications but current production methods rely upon magnetotactic bacteria which limits the range of sizes and shapes that can be generated as well as the obtainable yield. Here, electrohydrodynamic atomization is utilized to form nanoscale liposomes of tunable size followed by electroporation to transport iron into the nanoliposome core resulting in magnetite crystallization. Using a combination of electron and fluorescence microscopy, dynamic light scattering, Raman spectroscopy, and magnetic susceptibility measurements, it is shown that single crystals of single‐phase magnetite can be precipitated within each liposome, forming a near‐monodisperse population of magnetic nanoparticles. For the specific conditions used in this study the mean particle size is 58 nm (±8 nm) but the system offers a high degree of flexibility in terms of both the size and composition of the final product.
Successful application of gene silencing approaches critically depends on systems that are able to safely and efficiently deliver genetic material such as small interfering RNA (siRNA). Due to their beneficial well‐defined dendritic nanostructure, self‐assembling dendrimers are emerging as promising nanovectors for siRNA delivery. However, these kinds of vectors are plagued with stability issues, especially when considered for in vivo applications. Therefore, in the present study, disulfide‐based temporarily fixed micelles are developed that can degrade upon reductive conditions, and thus lead to efficient cargo release. In detail, lipoic acid‐derived crosslinked micelles are synthesized based on small polymerizable dendritic amphiphiles. Particularly, one candidate out of this series is able to efficiently release siRNA due to its redox‐responsive biodegradable profile when exposed to simulated intracellular environments. As a result, the reduction‐triggered disassembly leads to potent gene silencing. In contrast, noncrosslinkable, structurally related constructs fails under the tested assay conditions, thereby confirming the applied rational design approach and demonstrating its large potential for future in vivo applications.
下载免费PDF全文