Analysis of baclofen by capillary electrophoresis with laser-induced fluorescence detection

A new analytical method for baclofen (4-amino-3-p-chlorophenylbutyric acid) based on capillary electrophoretic separation and laser-induced fluorescence detection has been developed. Naphthalene-2,3-dicarboxaldehyde was used for precolumn derivatization of the non-fluorescent drug. Optimal separation and detection were obtained with an electrophoretic buffer of 50 mM sodium borate (pH 9.5) and a He-Cd laser (excitation at 442 nm, emission at 500 nm). Linearity (r > or = 0.99) over three orders of magnitude was generally obtained and the concentration limit of detection was in the nanomolar level. Coupled with a simple cleanup procedure, the method was successfully applied to the analysis of baclofen in human plasma. Recovery of spiked baclofen in plasma was 98%. The relative standard deviation values on peak size and migration time were 7.9% and 0.4%, respectively. The limit of detection of baclofen in plasma was 10 ng/ml.     

Quantitative polymerase chain reaction using capillary electrophoresis with laser-induced fluorescence detection: Analysis of duck hepatitis B

We report an accurate and reproducible DNA quantitation method using the polymerase chain reaction (PCR). The amount of PCR product is monitored after each PCR cycle by capillary electrophoresis. To ensure accurate quantitation, a non-amplified internal standard is added to each PCR-amplified electrophoresis sample to correct for variations in injection volume. Quantitation of the sample is based on the number of cycles necessary to generate a predetermined amount of PCR product. Duck hepatitis B virus genome was used as a model in this study. The genome was quantified with a linear relationship between cycle number and logarithm of sample DNA for amounts of sample DNA between 30 and 3.1 x 10(8) copies ( r(2)>0.999). The relative standard deviation for the corrected capillary electrophoresis signal was 2.7%, while the relative standard deviation for the overall assay was 3.0%. Results from a single-blind study generated a relative error of 1.3%.     

Multiplexed microRNA detection by capillary electrophoresis with laser-induced fluorescence

In this study, we developed a novel assay that simultaneously detects multiple miRNAs (microRNAs) within a single capillary by combining a tandem adenosine-tailed DNA bridge-assisted splinted ligation with denaturing capillary gel electrophoresis with laser-induced fluorescence. This proposed method not only represents a significant improvement in resolution but also allows for the detection of multiple miRNAs within a single capillary based on the length differences of specified target bridge DNA. The assay's linear range covers three orders of magnitude (1.0 nM to 1.0 pM) with a limit of detection (S/N=3) as low as 190 fM (2.5 zmol). Five miRNAs of Epstein-Barr virus (EBV) were also detected in EBV-infected nasopharyngeal carcinoma cells, while they did not appear in non-virus infected cells. Moreover, the electropherogram indicated that the screening of isomiRs (isomer of miRNA) of BART2 by CE-LIF is feasible by our proposed method. The developed electrophoresis-based method for miRNA detection is fast, amplification-free, multiplexed and cost-effective, making it potentially applicable to large-scale screening of isomiRs.     

Determination of phycobiliproteins by capillary electrophoresis with laser-induced fluorescence detection

Phycobiliproteins are derived from the photosynthetic apparatus of cyanobacteria and eukaryotic algae. They are composed of a protein backbone to which linear tetrapyrrole chromophores are covalently bound. Furthermore, they are water-soluble highly fluorescent, and relatively stable at room temperature and neutral pH. For this reason, capillary electrophoresis-laser induced fluorescence (CE-LIF) seems the idea method for determination of these important proteins. The effects of buffer additives such as sodium dodecyl sulfate (SDS)and putrescine on the separation of the three major phycobiliprotein types, namely allophycocyanin, phycocyanin, and phycoerythrin, with excitation and emission maxima at 652/660, 615/647, and 565(494)/575 nm, respectively, are considered. Detection limits for these proteins by CE-LIF are some 60-500 times better than by absorbance detection. The development of a fast and sensitive CE-LIF assay such as this is of potential significance to our understand ing of chemical and biological oceanographic processes.     

Determination of nitrocellulose by capillary electrophoresis with laser-induced fluorescence detection

The industrial application of nitrocellulose depends on its nitrogen content. When nitrocellulose presents high nitrogen content is used in the manufacture of explosives whereas nitrocellulose with low nitrogen content is used to make a wide range of daily and non-explosive products (e.g. cigarettes, paints, lacquers). This fact makes really important to develop a method for the determination and discrimination of nitrocellulose samples. This work reports, for the first time, the qualitative determination of nitrocellulose previously derivatized with 8-aminopyrene-1,3,6-trisulfonic acid (APTS) by capillary electrophoresis (CE-LIF) with laser-induced fluorescence detection (CE-LIF). APTS-labeled nitrocellulose was determined in lowly and highly nitrated nitrocellulose samples present in collodions and smokeless gunpowders, respectively, after their pulverization in liquid nitrogen. The method described enables the visual discrimination of different nitrocelluloses on the basis of the different electrophoretic profiles obtained, and provides a useful tool to determine nitrocellulose. Additionally, the use of field-amplified sample injection (FASI) enabled enhanced sample detection, which made it possible to determine nitrocellulose contained in ∼15 μg of gunpowder.     

Multiplex polymerase chain reaction analysis of Glu-1 high-molecular-mass glutenin genes from wheat by capillary electrophoresis with laser-induced fluorescence detection

The unique bread-making properties of wheat are closely correlated with composition and quantity of high-molecular-mass (HMW) glutenin subunits encoded by the Glu-1 genes. We report the development of a multiplex polymerase chain reaction (PCR) method to identify bread wheat genotypes carrying HMW glutenin allele composition of Glu-1 complex loci (Glu-A1, Glu-B1 and Glu-D1) by capillary electrophoresis(CE) with laser-induced fluorescence (LIF) detection. Two triplex primer sets of HMW glutenin subunit genes were examined. An automated and rapid CE-LIF technique is helpful in the multiplex PCR optimization process. Two fluorescent intercalating dyes (EnhanCE, and YO-PRO-1) are compared for detection of DNA fragments. Amplified DNA fragments of HMW glutenin Glu-1 genes were well separated both by agarose slab-gel electrophoresis and CE, and revealed minor differences between the sequences of 1Ax2*, 1Axnull, 1Bx6, 1Bx7, 1Bx17 and 1Dx5 genes. Moreover, CE technique requires samples of smaller volumes in comparison to slab-gel electrophoresis, and data can be obtained in less than 20 min. There was a very high concordance in the assessment of the molecular size of PCR-generated DNA markers. Fast and accurate identification of molecular markers of Glu-1 genes by CE-LIF can be an efficient alternative to standard procedure separation for early selection of useful wheat genotypes with good bread-making quality.     

Direct immunoassay of estrone by capillary electrophoresis with laser-induced fluorescence detection

An immunoassay for estrone (E(1)) in women's serum, based on the competitive reaction between fluorescein-labeled complete antigen and E(1) with limited amount of anti-estrone monoclonal antibody is described. A thermally reversible hydrogel, poly-N-isopropylacrylamide (pNIPA), was added to the buffer to improve the reproducibility. With a laser-induced fluorescence (LIF) detector, the capillary electrophoretic immunoassay (CEIA) can be applied to determine E(1) at a concentration lower than 19.6 pg/mL. The E(1) levels in ten normal women's serum were measured at the range of 118.6-222.0 pg/mL.     

Determination of abscisic acid by capillary electrophoresis with laser-induced fluorescence detection

A novel method based on capillary electrophoresis coupled to laser-induced fluorescence detection (CE-LIF) was developed for the determination of abscisic acid (ABA), which is an essential phytohormone during plant growth and development. ABA was labeled with 8-aminopyrene-1,3,6-trisulfonate via reductive amination in presence of acetic acid and sodium cyanoborohydride. The derivatization yield was maximized by optimizing several derivatization parameters including derivatization reagent concentration, reaction temperature and time. The conjugate was separated and quantitated by CE-LIF. The linearity of ABA was determined in the range from 0.1 to 10 micromol l(-1) with a correlation of 0.9979. The derivatization limit of detection for ABA was found to be 56 fmol (corresponding to the concentration of 2.8 x 10(-8) mol l(-1)). The detection limit for ABA was 5.5 amol for an injection volume of 5 nl. As a preliminary application, the proposed method was successfully applied to determining trace amount of ABA in the crude extracts of tobacco without extra purification and enrichment procedure and showed a better selectivity and sensitivity than those conventional methods used in determination of ABA.     

Study of DNA-ellipticine interaction by capillary electrophoresis with laser-induced fluorescence detection

Ellipticine (5,11-dimethyl-6H-pyrido[4,3-b]carbazole), an alkaloid isolated from Apocynaceae plants, exhibits an antitumor activity, which is exceptionally high against several specific types of tumors. Ellipticine is also interesting as an anticancer drug as it has limited side effects and lacks of hematological toxicity. Various methods to study intercalating activity of this drug have been developed. However, to our best knowledge, capillary electrophoresis (CE) as a technique combining high separation resolution with various detection options has never been used for these purposes. In this study, a novel separation method based on CE with laser-induced fluorescence (CE-LIF) detection has been developed for the determination of ellipticine and for the monitoring of ellipticine-DNA interaction. Sodium acetate (50 mM, pH 4.5) was used as a background electrolyte and LIF detection at λ(ex) = 488 nm. The limit of detection for ellipticine was determined to be 5 × 10?? M. A total of 20% dimethyl sulfoxide was found optimal as sample solvent. Additionally, intercalation of ellipticine into the double-stranded DNA was investigated. Signal corresponding to ellipticine was decreasing and a new peak appeared and was growing. It can be concluded that CE-LIF is a method applicable to in vitro studies of ellipticine-DNA complexes.     

Measuring the activity of farnesyltransferase by capillary electrophoresis with laser-induced fluorescence detection

Enzymatic farnesylation of oncogenic forms of Ras proteins is the initial step in a series of posttranslational modifications essential for Ras activity. The modification is catalyzed by the enzyme, protein farnesyltransferase (PFTase), which transfers a farnesyl moiety from farnesyl diphosphate to the protein. We employed capillary electrophoresis (CE) with laser-induced fluorescence (LIF) detection to develop a rapid and sensitive method for the determination of PFTase activity in vitro. The limited substrate specificity of PFTase allowed us to use a fluorescently labeled pentapeptide instead of a Ras protein as a substrate for the enzyme; the product of the enzymatic reaction was the farnesylated pentapeptide. The product was separated from the substrate by CE and quantified with LIF detection. Under optimal conditions, the separation was achieved within 10 min with a resolution of 86. The mass and concentration limits of detection for the farnesylated product were 10(-19) mol and 0.28 nM, respectively. By measuring the rate of accumulation of the farnesylated product, we were able to determine the kinetic parameters of the enzymatic reaction. For yeast PFTase as an enzyme and difluorocarboxyfluorescein-labeled GCVIA peptide as a substrate, the values of k(cat) and K(M) were found to be (3.1 +/- 0.3)x10(-3) s(-1) and (12.0 +/- 1.2) nuM, respectively. Our results suggest that CE-LIF can be efficiently used for the determination of enzymatic activity of PFTase in vitro. After minor modifications, the developed method can be also applied to other reactions of enzymatic prenylation of proteins.     

Analysis of glycosaminoglycan monosaccharides by capillary electrophoresis using indirect laser-induced fluorescence detection

Two methods for monosaccharide analysis by capillary electrophoresis (CE) using counterelectroosmotic and coelectroosmotic modes with indirect laser-induced fluorescence detection were optimised and compared. A mixture of seven glycosaminoglycan-derived hexoses was separated in alkaline fluorescein-based electrolytes and detected in both counterelectroosmotic and coelectroosmotic conditions. The fluorescein concentration and pH of the background electrolyte, and the influence of the reversal of electroosmotic flow by addition of hexadimethrine bromide on the separation were studied. Coelectroosmotic CE conditions provided better resolution and limits of detection. A 10(-6) M fluorescein solution at pH 12.25 containing 0.0005% (w/v) hexadimethrine bromide was used as background electrolyte. Quality parameters such as run-to-run, day-to-day precision and limits of detection were calculated, and better figures of merit were obtained for the coelectrooosmotic conditions than for the counterelectroosmotic mode. The coelectroosmotic method was applied to the quantitation of the hexosamine contents in glycosaminoglycans after acid hydrolysis. The method proved to be suitable for the determination of dermatan sulfate in heparin down to 2% (w/w).     

Analysis of chitin oligosaccharides by capillary electrophoresis with laser-induced fluorescence

A method, using capillary electrophoresis (CE) with laser-induced fluorescence (LIF) detection for analyzing chitin oligosaccharides is described. Chitin oligosaccharides were derivatized with 9-aminopyrene-1,4,6-trisulfonate (APTS) via reductive amination at 37 degrees C for 16 h (optimized conditions). The APTS-chitin oligosaccharides were analyzed using either an acidic citric acid-phosphate buffer or an alkaline borate buffer. The effects of buffer types, buffer pH values, and buffer concentrations on the separation were examined. The analytes were successfully separated by using a pH 4.6 citric acid-phosphate within 19 min. The APTS-derivatized chitin monosaccharide (D-glucosamine) migrated first. The analytes were also completely separated by using a pH 9.0 borate buffer within 24 min. Moreover, the specificity of enzyme digestion on chitin polysaccharides using the optimized APTS labeling procedure and the CE-LIF method was demonstrated.     

Single-cell analysis by intracellular immuno-reaction and capillary electrophoresis with laser-induced fluorescence detection

A novel method for single-cell analysis was developed by combining electroporation for intracellular immuno-reaction and capillary electrophoresis (CE) with laser-induced fluorescence (LIF) detection. Human interferon-gamma (IFN-gamma) in natural killer (NK) cells was chosen as the test antigen. Two forms of IFN-gamma in single cells could be well separated and detected with a limit of detection of zeptomole. In this assay, the anti-IFN-gamma monoclonal antibody labeled with fluorescein isothiocyanate (Ab*) was introduced into NK cells by electrophoration for intracellular immuno-reaction. After completion of the intracellular immuno-reaction, the NK cells were chemically pre-perforated with digitonin to lyse easily. Then, one NK cell containing the complexes of IFN-gamma isoantigens with Ab* was electrokinetically injected into the capillary. The cell adsorbed on the tip of capillary was lysed by ultrasonication. Finally, the complexes of the different forms of IFN-gamma in the cell were separated and detected by CE-LIF detection.     

Analysis of calcineurin activity by capillary electrophoresis with laser-induced fluorescence detection using peptide substrate

Reversible protein phosphorylation and dephosphorylation are very important activities in understanding cellular signaling networks. In this paper we described a CE-LIF-based assay method of calcineurin (CN), a protein phosphatase important in cardiac hypertrophy, in which a fluorescence-labeled 19-amino acid phosphopeptide was used as a substrate. The substrate was converted to a dephosphorylated product by CN and both the substrate and product were detected by the LIF detector. This assay method was tested for various separation parameters as well as reaction parameters. It was found that 100 mM of a boric acid buffer with a pH of 9.00 produced optimum separation at 10 kV of applied voltage using a 47 cm capillary. After obtaining the suitable reaction conditions the method was used to detect and quantify the CN activity in HL-1 cell extracts where the picogram level of CN activity was obtained per microgram total protein. It was also observed that immunosuppressive drugs like okadaic acid and cyclosporine A inhibit in vitro CN activity.     

Indirect laser-induced fluorescence detection of diuretics separated by capillary electrophoresis

Indirect LIF detection was applied to the detection of four acidic diuretics separated by CZE. Semiconductor laser was employed to provide the stable excitation of 473 nm. With an optimized electrophoretic buffer system which contained 5 mM of triethylamine, 0.1 microM of fluorescein, and 5% of n-butanol, fast separation of four diuretics (ethacrynic acid, chlorthalidone, bendroflumethiazide, and bumetanide) can be performed within 3 min with the detection limits of 0.2-2 microg/mL. The impacts of buffer components including the concentrations of the electrolytes, fluorescence probe, and the organic additives were demonstrated. The method was applied for the detection of diuretics in urine. As an alternative way for the fast analysis of diuretics, this indirect detection method provided the technical support for future microchip performances, in which diuretics may be detected in the microchip by the common LIF detector without derivatization.     

Analysis of intracellular regulatory proteins by immunoaffinity capillary electrophoresis coupled with laser-induced fluorescence detection

Measurement of intracellular regulatory proteins is of great importance in many areas of biomedical research. In this communication we describe an antibody-based capillary electrophoresis system equipped with an on-line laser-induced fluorescence detector capable of measuring intracellular proteins in cultures as low as 100 cells. The system demonstrated a high degree of precision and accuracy, being capable of detecting the fluorochrome-labeled analytes of interest at concentration of approximately 0.5 pg. We have used this instrument to study concentrations of the intracellular regulatory proteins STAT-1 and STAT-3, following stimulation of lymphocyte cultures with the inflammatory cytokine, IL-6. Using a combination of four antibodies specific for either STAT-1 or STAT-3 in both their nonphosphorylated and phosphorylated forms, we were able to demonstrate the differential expression of these proteins over time.     

Determination of individual microsphere properties by capillary electrophoresis with laser-induced fluorescence detection

Capillary electrophoresis with postcolumn laser-induced fluorescence detection was used to individually detect 6.0, 1.0, 0.5, and 0.2 num diameter polystyrene microspheres and individually measure their electrophoretic mobility. The analysis of a nanoliter-size volume from a microsphere suspension results in an electropherogram characterized by several narrow spikes in a well-defined migration time window. Each spike is associated with one microsphere because, when one single microsphere is introduced into the capillary by micromanipulation, the electropherogram has only one spike in the same migration time window. The distributions of individual measurements resulting from an electropherogram were used to evaluate the reproducibility from run to run, observe the effect of sodium dodecyl sulfate (SDS) added to the running buffer, and to investigate the origin of electrophoretic dispersion. As expected from the interactions between microspheres and SDS, the addition of this surfactant to the running buffer narrowed the range and shifted the average electrophoretic mobility to more negative values. After evaluating common sources of broadening in capillary electrophoresis, electrophoretic dispersion was attributed to microsphere heterogeneity. Unlike electropherograms displaying Gaussian-like profiles, the two-dimensional representations of the individual measurements provide a new alternative to evaluate and study electrophoretic-related properties of microspheres.