Molecular dynamics simulations of the melting of aluminum nanoparticles

Molecular dynamics simulations are performed to determine the melting points of aluminum nanoparticles of 55-1000 atoms with the Streitz-Mintmire [Phys. Rev. B 1994, 50, 11996] variable-charge electrostatic plus potential. The melting of the nanoparticles is characterized by studying the temperature dependence of the potential energy and Lindemann index. Nanoparticles with less than 850 atoms show bistability between the solid and liquid phases over temperature ranges below the point of complete melting. The potential energy of a nanoparticle in the bistable region alternates between values corresponding to the solid and liquid phases. This bistability is characteristic of dynamic coexistence melting. At higher temperatures, only the liquid state is stable. Nanoparticles with more than 850 atoms undergo a sharp solid-liquid-phase transition characteristic of the bulk solid phase. The variation of the melting point with the effective nanoparticle radius is also determined.     

Molecular dynamics simulations of multilayer films of polyelectrolytes and nanoparticles

We performed molecular dynamics simulations of multilayer assemblies of flexible polyelectrolytes and nanoparticles. The film was constructed by sequential adsorption of oppositely charged polymers and nanoparticles in layer-by-layer fashion from dilute solutions. We have studied multilayer films assembled from oppositely charged polyelectrolytes, oppositely charged nanoparticles, and mixed films containing both nanoparticles and polyelectrolytes. For all studied systems, the multilayer assembly proceeds through surface overcharging after completion of each deposition step. There is almost linear growth in the surface coverage and film thickness. The multilayer films assembled from nanoparticles show better layer stratification but at the same time have higher film roughness than those assembled from flexible polyelectrolytes.     

Molecular dynamics and thermodynamic simulations of segregation phenomena in binary metal nanoparticles

Journal of Thermal Analysis and Calorimetry - An approach combining atomistic molecular dynamics (MD) and thermodynamic simulations has been applied to predict the distribution of components in...     

Molecular dynamics simulations of halide glasses

Summary Halide glasses have been extensively studied in recent years because of their potential application as infrared transmitting fibre optic materials. They are believed to be more ionic than glasses based on silica and should therefore be more amenable to molecular dynamics simulation using simple two-body potentials. Here the main features of structural models derived using such techniques are described and compared with available structural data. Possible future applications of this approach are outlined.     

Molecular dynamics simulations of peptide-surface interactions

Proteins, which are bioactive molecules, adsorb on implants placed in the body through complex and poorly understood mechanisms and directly influence biocompatibility. Molecular dynamics modeling using empirical force fields provides one of the most direct methods of theoretically analyzing the behavior of complex molecular systems and is well-suited for the simulation of protein adsorption behavior. To accurately simulate protein adsorption behavior, a force field must correctly represent the thermodynamic driving forces that govern peptide residue-surface interactions. However, since existing force fields were developed without specific consideration of protein-surface interactions, they may not accurately represent this type of molecular behavior. To address this concern, we developed a host-guest peptide adsorption model in the form of a G(4)-X-G(4) peptide (G is glycine, X is a variable residue) to enable determination of the contributions to adsorption free energy of different X residues when adsorbed to functionalized Au-alkanethiol self-assembled monolayers (SAMs). We have previously reported experimental results using surface plasmon resonance (SPR) spectroscopy to measure the free energy of peptide adsorption for this peptide model with X = G and K (lysine) on OH and COOH functionalized SAMs. The objectives of the present research were the development and assessment of methods to calculate adsorption free energy using molecular dynamics simulations with the GROMACS force field for these same peptide adsorption systems, with an oligoethylene oxide (OEG) functionalized SAM surface also being considered. By comparing simulation results to the experimental results, the accuracy of the selected force field to represent the behavior of these molecular systems can be evaluated. From our simulations, the G(4)-G-G(4) and G(4)-K-G(4) peptides showed minimal to no adsorption to the OH SAM surfaces and the G(4)-K-G(4) showed strong adsorption to the COOH SAM surface, which is in agreement with our SPR experiments. Contrary to our experimental results, however, the simulations predicted a relatively strong adsorption of G(4)-G-G(4) peptide to the COOH SAM surface. In addition, both peptides were unexpectedly predicted to adsorb to the OEG surface. These findings demonstrate the need for GROMACS force field parameters to be rebalanced for the simulation of peptide adsorption behavior on SAM surfaces. The developed methods provide a direct means of assessing, modifying, and validating force field performance for the simulation of peptide and protein adsorption to surfaces, without which little confidence can be placed in the simulation results that are generated with these types of systems.     

Molecular dynamics simulations of lipid bilayers

Computer simulation methods are becoming increasingly widespread as tools for studying the structure and dynamics of lipid bilayer membranes. The length scale and time scale accessible to atomic-level molecular dynamics simulations are rapidly increasing, providing insight into the relatively slow motions of molecular reorientation and translation and demonstrating that effects due to the finite size of the simulation cell can influence simulation results. Additionally, significant advances have been made in the complexity of membrane systems studied, including bilayers with cholesterol, small solute molecules, and lipid-protein and lipid-DNA complexes. Especially promising is the progress that continues to be made in the comparison of simulation results with experiment, both to validate the simulation algorithms and to aid in the interpretation of existing experimental data.     

Molecular dynamics simulations of biotin carboxylase

Biotin carboxylase catalyzes the ATP-dependent carboxylation of biotin and is one component of the multienzyme complex acetyl-CoA carboxylase that catalyzes the first committed step in fatty acid synthesis in all organisms. Biotin carboxylase from Escherichia coli, whose crystal structures with and without ATP bound have been determined, has served as a model system for this component of the acetyl-CoA carboxylase complex. The two crystal structures revealed a large conformational change of one domain relative to the other domains when ATP is bound. Unfortunately, the crystal structure with ATP bound was obtained with an inactive site-directed mutant of the enzyme. As a consequence the structure with ATP bound lacked key structural information such as for the Mg2+ ions and contained altered conformations of key active-site residues. Therefore, nanosecond molecular dynamics studies of the wild-type biotin carboxylase were undertaken to supplant and amend the results of the crystal structures. Specifically, the protein-metal interactions of the two catalytically critical Mg2+ ions bound in the active site are presented along with a reevaluation of the conformations of active-site residues bound to ATP. In addition, the regions of the polypeptide chain that serve as hinges for the large conformational change were identified. The results of the hinge analysis complemented a covariance analysis that identified the individual structural elements of biotin carboxylase that change their conformation in response to ATP binding.     

Molecular dynamics simulations of polyelectrolyte adsorption

We have performed molecular dynamics simulations of polyelectrolyte adsorption at oppositely charged surfaces from dilute polyelectrolyte solutions. In our simulations, polyelectrolytes were modeled by chains of charged Lennard-Jones particles with explicit counterions. We have studied the effects of the surface charge density, surface charge distribution, solvent quality for the polymer backbone, strength of the short-range interactions between polymers and substrates on the polymer surface coverage, and the thickness of the adsorbed layer. The polymer surface coverage monotonically increases with increasing surface charge density for almost all studied systems except for the system of hydrophilic polyelectrolytes adsorbing at hydrophilic surfaces. In this case the polymer surface coverage saturates at high surface charge densities. This is due to additional monomer-monomer repulsion between adsorbed polymer chains, which becomes important in dense polymeric layers. These interactions also preclude surface overcharging by hydrophilic polyelectrolytes at high surface charge densities. The thickness of the adsorbed layer shows monotonic dependence on the surface charge density for the systems of hydrophobic polyelectrolytes for both hydrophobic and hydrophilic surfaces. Thickness is a decreasing function of the surface charge density in the case of hydrophilic surfaces while it increases with the surface charge density for hydrophobic substrates. Qualitatively different behavior is observed for the thickness of the adsorbed layer of hydrophilic polyelectrolytes at hydrophilic surfaces. In this case, thickness first decreases with increasing surface charge density, then it begins to increase.     

Molecular dynamics simulations of cardiolipin bilayers

Cardiolipin is a key lipid component in the inner mitochondrial membrane, where the lipid is involved in energy production, cristae structure, and mechanisms in the apoptotic pathway. In this article we used molecular dynamics computer simulations to investigate cardiolipin and its effect on the structure of lipid bilayers. Three cardiolipin/POPC bilayers with different lipid compositions were simulated: 100, 9.2, and 0% cardiolipin. We found strong association of sodium counterions to the carbonyl groups of both lipid types, leaving in the case of 9.2% cardiolipin virtually no ions in the aqueous compartment. Although binding occurred primarily at the carbonyl position, there was a preference to bind to the carbonyl groups of cardiolipin. Ion binding and the small headgroup of cardiolipin gave a strong ordering of the hydrocarbon chains. We found significant effects in the water dipole orientation and water dipole potential which can compensate for the electrostatic repulsion that otherwise should force charged lipids apart. Several parameters relevant for the molecular structure of cardiolipin were calculated and compared with results from analyses of coarse-grained simulations and available X-ray structural data.     

Molecular dynamics simulations of the temperature‐dependent behavior of aluminum,copper, and platinum

We have investigated a molecular dynamics procedure for simulating the temperature‐dependent behavior of three face‐centered‐cubic metals: aluminum, copper, and platinum. A potential due to Cai and Ye, which includes both pairwise additive and multibody terms, was used in conjunction with the CHARMM code. The properties calculated were the interaction energy per atom, the radial distribution function, the mean‐square fluctuation in atomic positions, the coefficient of thermal expansion, the isothermal compressibility, and the heat capacities at constant pressure and volume. These properties were evaluated at 100° intervals from 300 to 1100 K for copper and platinum and from 300 to 800 K for aluminum, at pressures of 1 and 10,000 atm. Overall, the results were quite satisfactory. Except in one instance, the qualitative variations with temperature were reproduced reasonably well, and there was frequently also good quantitative agreement, especially at the lower temperatures. In general, the poorest results were obtained for aluminum. Some possible reasons for this are discussed. © 2000 John Wiley & Sons, Inc. Int J Quant Chem 76: 670–676, 2000     

Molecular dynamics simulations of nanoparticles in dense isotropic nematogens: the role of matrix-induced long-range repulsive interactions

We have carried out molecular dynamics simulation studies of binary mixtures of spherical nanoparticles (NPs) in a matrix of dense isotropic rod-shaped nematogens, with the size of the nematogen length being similar to that of the NP diameter. NPs at even low concentrations were found to shift the isotropic-nematic (I-N) transition significantly to higher pressure at a given temperature, indicative of long-range perturbation of the nematogenic matrix by the NPs. The NPs were found to be dispersed in the dense isotropic nematogenic matrix over a wide range of NP concentrations due to long-range (compared with the molecular size of the nematogens) repulsion caused by NP-induced local order fluctuations and reduced local orientational correlation in the isotropic nematogenic matrix, in contrast to the phase separation predicted and observed in other studies where the particles were much larger or smaller than the nematogens. Furthermore, since the repulsion observed in the NP-nematogen mixtures is only microscopically long range (on the order of about ten molecular lengths of the nematogens), globally ordered clustering observed in mixtures of colloidal particles in nematic matrices resulting from macroscopically long-range interaction is not observed in our simulations.     

Molecular dynamics simulations of lithium alkyl carbonates

A quantum chemistry-based many-body polarizable force field has been developed for two model solid-electrolyte interphase (SEI) components: dilithium ethylene dicarbonate (Li(2)EDC) and lithium methyl carbonate (LiMC). Molecular dynamics (MD) simulations of amorphous Li(2)EDC and LiMC were performed at temperatures from 393 to 600 K. Simulations reveal that Li(+) is coordinated by approximately 4.6 oxygen atoms from -COO(-) groups coming from different alkyl carbonate molecules. Charge transport in Li(2)EDC was found to be almost entirely due to Li(+). The temperature dependence of the ionic conductivity of the SEI model compounds Li(2)EDC and LiMC was found to be significantly stronger than that of liquid electrolytes (e.g., ethylene carbonate + LiTFSI), yielding extrapolated conductivities of the Li(2)EDC on order of 10(-10) S/cm at -30 degrees C.     

Molecular dynamics simulations of peptide carboxylate hydration

Aqueous solvation of carboxylate groups, as present in the glycine zwitterion and the dipeptide aspartylalanine, is studied employing a force-field that includes distributed multipole electrostatics and induction contributions (Amoebapro: P. Ren and J. W. Ponder, J. Comput. Chem., 2002, 23, 1497; P. Ren and J. W. Ponder, J. Phys. Chem. B, 2003, 107, 5933; J. W. Ponder and D. A. Case, Adv. Protein Chem., 2003, 66, 27). Radial and orientation distribution functions, as well as hydration numbers, are calculated and compared with existing simulation data derived from Car-Parrinello molecular dynamics (CPMD), and also distributed-charge force-fields. Connections are also made with experimental data for solvation of carboxylates in water. Our findings show that Amoebapro yields carboxylate solvation properties in very good agreement with CPMD results, significantly closer agreement than can be obtained from traditional force-fields. We also demonstrate that the influence of solvation on the conformation of the dipeptide is markedly different using Amoebapro compared with the other force-fields.     

Molecular dynamics simulations of supramolecular polymer rheology

Using equilibrium and nonequilibrium molecular dynamics simulations, we studied the equilibrium and rheological properties of dilute and semidilute solutions of head-to-tail associating polymers. In our simulation model, a spontaneous complementary reversible association between the donor and the acceptor groups at the ends of oligomers was achieved by introducing a combination of truncated pseudo-Coulombic attractive potential and Lennard Jones repulsive potential between donor, acceptor, and neighboring groups. We have calculated the equilibrium properties of supramolecular polymers, such as the ring/chain equilibrium, average molecular weight, and molecular weight distribution of self-assembled chains and rings, which all agree well with previous analytical and computer modeling results. We have investigated shear thinning of solutions of 8- and 20-bead associating oligomers with different association energies at different temperatures and oligomer volume fractions. All reduced viscosity data for a given oligomer length can be collapsed into one master curve, exhibiting two power-law regions of shear-thinning behavior with an exponent of -0.55 at intermediate ranges of the reduced shear rate β and -0.8 (or -0.9) at larger shear rates. The equilibrium viscosity of supramolecular solutions with different oligomer lengths and associating energies is found to obey a power-law scaling dependence on oligomer volume fraction with an exponent of 1.5, in agreement with the experimental observations for several dilute or semidilute solutions of supramolecular polymers. This implies that dilute and semidilute supramolecular polymer solutions exhibit high polydispersity but may not be sufficiently entangled to follow the reptation mechanism of relaxation.     

Molecular dynamics simulations of local field factors

In the present work, the authors evaluate a scheme based on molecular dynamics to derive local field factors. These are given without any assumption of a cavity by fitting the Langevin functions to the order parameters obtained from the molecular dynamics simulations. The local field factors so obtained, with the detailed chromophore-solvent interactions and solvent structures taken into account, are much smaller than those calculated from the conventional Onsager and Lorentz models. A numerical demonstration is given for two typical organic chromophore molecules, p-nitroaniline and p-nitro-N,N-dimethylaniline dissolved in chloroform.     

Molecular dynamics simulations of the melting of 1,3,3-trinitroazetidine

Physical properties of condensed-phase 1,3,3-trinitroazetidine (TNAZ) have been computed with molecular dynamics (MD) and a nonreactive, fully flexible force field formulated by combining the intramolecular interactions obtained from the Generalized AMBER Force Field and the rigid-molecule force field developed by Sorescu-Rice-Thompson [J. Phys. Chem. B 1997, 101, 798] (AMBER-SRT). The results are compared with MD calculations, using the AMBER force field. The predicted densities of crystalline TNAZ from both force fields are about 10% lower than the experimental value. The calculated thermodynamic melting point at 1 atm from the AMBER-SRT force field is 390 K, in good agreement with the measured value of 374 K, while the AMBER force field predicts a thermodynamic melting point of 462 K. The lattice parameters and the molecular and crystal structures calculated with the AMBER-SRT force field are in excellent agreement with experiment. Simulations with the AMBER-SRT force field were also used to generate the isotherm of TNAZ up to 4 GPa and the bulk modulus and its pressure derivative.     

Characterization of titanium dioxide nanoparticles using molecular dynamics simulations

Molecular dynamics simulations of titanium dioxide nanoparticles in the three commonly occurring phases (anatase, brookite, and rutile) are reported. The structural properties inferred by simulated X-ray diffraction patterns of the nanoparticles were investigated. The titanium-oxygen bond length as a function of size, phase, and temperature was determined and was found to be dependent on the coordination environment of the titanium and independent of phase and size. The equilibrium Ti-O bond length is 1.86 A for a four-coordinated titanium ion, 1.92 A for a five-coordinated titanium ion, and 1.94 A for an octahedral titanium ion. Smaller nanoparticles are characterized by a higher fraction of titanium ions that are four and five coordinated, due to the larger surface area-to-volume ratios. The surface energies for anatase, rutile, and brookite particles were reported. The surface energy of the nanoparticle increases and approaches a constant value as the particle gets bigger. The surface energies of small rutile particles are higher than that for anatase particles of a similar size, consistent with anatase being the more stable phase of nanocrystalline titanium dioxide.     

Molecular dynamics simulations of surface-initiated melting of nitromethane

The melting of nitromethane initiated at solid-vacuum interfaces has been investigated using molecular dynamics nvt simulations with a realistic force field [D. C. Sorescu et al., J. Phys. Chem. B 104, 8406 (2000)]. The calculated melting point (251+/-5 K) is in good agreement with experiment (244.73 K) and values obtained previously (approximately 255.5 and 266.5+/-8 K) using other simulation methods [P. M. Agrawal et al., J. Chem. Phys. 119, 9617 (2003)]. Analyses of the molecular orientations and diffusion during the simulations as functions of the distance from the exposed surfaces show that the melting is a direct crystal-to-liquid transition, in which the molecules first gain rotational freedom, then mobility. There is a slight dependence of the melting temperature on the exposed crystallographic face.