锂离子电池有机硅电解液

有机硅电解液具有优良的热稳定性、低可燃性、无毒性、高电导率和高分解电压等优点,近年来成为了锂离子电池新型电解液的研究热点。本文综述了有机硅电解液的研究进展,重点介绍了聚醚有机硅电解液的设计合成、物理化学性能、与电解质盐和电极材料的匹配性关系及其在电池中的性能表现;简述了有机硅功能化电解液添加剂的研究进展,如成膜添加剂、阻燃添加剂、吸酸吸水添加剂等;最后对有机硅电解液的进一步研究趋势和应用前景进行了展望。     

含有氟代溶剂或含氟添加剂的锂离子电解液

随着大型移动设备（如新能源汽车等）、储能电站及其他便携式充电设备的日益普及,锂离子电池正逐步占领化学电源市场的主导地位。电解液是锂离子电池的重要组成部分,对电池的许多性能如输出电压、能量密度、输出功率、寿命、温度适用范围和安全性能等具有重要的影响。氟具有很强的电负性和弱极性,氟代溶剂或含氟添加剂具有低熔点、高闪点和高氧化分解电压等优点。氟代溶剂与电极材料之间的润湿性也较好,在高电压电解液、高安全性电解液、宽温度窗口电解液以及其他特殊功能电解液的开发中具有深入的研究和广泛的应用。本文综述了近年来氟代溶剂或添加剂在锂离子电池电解液中的不同应用,分析阐述了其对电池性能提升的机理,总结了以氟代碳酸乙烯酯（FEC）为代表的氟代溶剂的合成方法,最后对用于锂离子电池电解液的氟代溶剂或含氟添加剂的研发方向和发展趋势进行了展望。     

锂离子电池高电压电解液

开发高电压正极材料是发展高能量密度锂离子电池的重要途径之一。常规电解液在高电压下容易与正极材料表面发生副反应,影响高电压正极材料性能的发挥,因此,高电压电解液引起了人们广泛的关注。本文主要从新型溶剂体系和常规碳酸酯溶剂体系两方面对锂离子电池高电压电解液进行综述与评价,提出了现有电解液的不足及面临的问题。从电解液溶剂分子设计理论入手,分析了砜类溶剂、腈基溶剂和离子液体等新型溶剂作为高压电解液溶剂的优缺点,同时探讨了不同种类添加剂在常规碳酸酯溶剂体系中的作用机理。此外,本文还介绍了理论计算方法在锂离子电池高电压电解液研究中的应用,并对其在设计新型高电压电解液中的应用前景进行了展望。     

锂离子电池高电压电解液的研究现状

目前提高锂离子电池能量密度的途径主要有提高锂离子电池的工作电压和应用高工作电压的正极材料,因此,锂离子电池高电压电解液的研究和开发势在必行。本文概述了锂离子电池电解液和高电压电解液的特点,介绍了前线轨道理论中的HOMO和LUMO对电解液设计的指导意义。尤其是结合日本知名企业和科研机构在高电压电解液方面的研究成果,阐述了两种实现电解质高电压化的途径,即提高溶剂本身的耐氧化性和使用添加剂,总结了氟代酯、氟化醚、硼酸酯、砜类和耐氧化添加剂等用于高电压电解液中的关键物质类型,并讨论了目前高电压电解液研究开发所带来的启示。     

锂离子电池电解液功能性添加剂设计及应用

为提高锂离子电池的电化学性能,开发适合不同电解液的功能性添加剂是重要手段之一。功能性添加剂可以在不增加电池成本的情况下,显著改变电池的电化学性能,如改善循环性能,提高可逆容量和电解液电导率。本文分别从溶剂和添加剂两方面进行系统分析,介绍了锂离子电池电解液功能性添加剂的现状与进展,并提出面临的问题。本文以功能性添加剂的不同官能团为出发点,分析其作用机理,并分类探讨了阻燃添加剂、高电压添加剂等的优缺点、应用和前景。最后对锂离子电池电解液的溶剂及其添加剂的发展进行了展望。     

锂离子电池高电压和耐燃电解液研究进展

电解液作为锂离子电池的重要组成部分,起着传输离子的作用,电解液的性质对电池的容量、循环性能及安全性能等影响巨大.近年来,随着高电压、高能量密度锂离子电池的开发应用,现有常规碳酸酯电解液存在正极稳定性差、闪点低、易燃烧等问题.因此,发展高电压耐燃电解液是应用高电压高容量正极材料、发展高电压高容量高安全性锂离子电池的迫切需要.主要综述了高电压电解液、耐燃性电解液及兼具抗氧化性和耐燃性的高浓度电解液的研究进展和现状.在此基础上,对锂离子电池新型电解液的发展方向进行了展望.     

锂离子电池安全性添加剂*

作为锂离子电池的一个重要组成部分,电解质对电池的性能有重要影响。有机电解液功能添加剂是近年来锂离子电池研究中的一个热点。本文介绍了锂离子电池有机电解液阻燃剂和过充电保护剂改善电池安全性的作用机理、特点以及它们的研究应用现状,并对各种添加剂的优缺点作了简要评价。     

高比能锂离子电池高电压电解液的设计

自便携式电子设备以及电动汽车问世后,锂离子电池储能设备已经难以满足当前的生活与生产需求.锂离子电池作为商业储能设备市场的主要占有者,正朝着更高的能量密度、更长久的使用寿命以及更高的安全性能等方向发展.虽然通过提高锂离子电池的截止电压可以达到提升电池重量密度和体积密度的效果,但电池体系在高电压下将非常不稳定,这将导致锂离子电池的循环性能迅速衰减.同时,大量的电解液分解产物的堆积,导致电池的界面阻抗上升.另一方面,气体的生成形成了电池的安全隐患.本文针对高电压电解液的溶剂设计和电解液添加剂设计两个方面,回顾了过去一段时间里高电压电解液的发展.根据当前的理论研究基础,提出了高比能锂离子电池电解液的设计重心和未来该领域的主要研究方向.     

量子化学方法在锂离子电池电解液研究中的应用

总结了近年来量子化学方法在锂离子电池电解液研究中的应用进展,阐述了量子化学方法在新型锂盐设计、功能添加剂作用机理分析和电极/电解液界面膜的形成过程研究中发挥的作用,对其用来设计锂离子电池电解液功能分子作出展望。     

高压锂离子电池电解液的研究进展

电极/电解液界面不稳定是高压锂离子电池发展的主要瓶颈.提高界面稳定性是高压锂离子电池得以应用的前提.本文综述了碳酸酯基电解液氧化分解反应机理、新型耐高压溶剂体系和新型成膜添加剂实验与理论的研究进展.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.