单分散SiO2纳米颗粒复合凝胶电解质的应用

以单分散程度较高的SiO₂纳米颗粒(约130 nm)作为填料,聚偏氟乙烯-六氟丙烯(PVDF-HFP)作为聚合物基质,采用简便的物理共混法制备出了一种单分散SiO₂纳米颗粒复合凝胶聚合物电解质(MCGPEs)并将其应用于锂电池中。扫描电镜结果表明,SiO₂纳米颗粒在聚合物基体中分散均匀。与传统凝胶聚合物电解质(GPEs)和商业SiO₂颗粒复合凝胶电解质(CGPEs)相比,MCGPEs有着更高的电解液吸液能力和离子电导率,并且具备更强的锂离子迁移能力。此外,使用MCGPEs作为电解质的锂电池,在1.0C下历经300次循环后仍然保持了121.1 mAh·g^-1的较高比容量,表现出了优异的循环性能。同时,其倍率性能也十分优异,在10C倍率下获得了135 mAh·g^-1的比容量,远高于GPEs锂电池(76.2 mAh·g^-1)。     

静电纺丝纳米纤维基凝胶聚合物电解质的研究进展

凝胶聚合物电解质(GPEs)可以解决传统电池的漏液问题和低能量密度问题,提高电池的安全性能,使电池轻便化,薄型化和外形多样化。静电纺丝技术可以控制纤维的直径和孔隙率,平衡GPEs离子电导率和力学性能,实现两者的共同提高,引起众多学者的研究兴趣。重点对聚偏氟乙烯(PVDF)电纺膜基凝胶聚合物电解质和聚丙烯腈(PAN)电纺膜基凝胶聚合物电解质的制备工艺和性能的研究进展进行了介绍,并对静电纺丝纳米纤维基凝胶聚合物电解质存在的问题和研究方向进行了探讨。     

离子液体/凝胶聚合物电解质的制备及其与LiFePO_4的相容性

以1-甲基-3-乙基咪唑六氟磷酸盐(EMIPF6)、聚偏氟乙烯-六氟丙烯(P(VDF-HFP))和六氟磷酸锂(LiPF6)为原料,采用溶液浇铸法制备了离子液体/凝胶聚合物电解质(ILGPE).通过循环伏安(CV)、计时电流法、恒流充放电、电化学阻抗法(EIS)研究了该电解质的离子传输特性以及与锂离子电池正极材料LiFePO4的相容性.结果表明,离子液体/凝胶聚合物电解质的室温电导率为1.650×10-3S·cm-1,电化学稳定窗口达到5.0V.在充放电循环过程中,电极表面形成的钝化膜改善了锂离子脱、嵌可逆性和电极/电解质的界面性质.     

聚偏氟乙烯电纺膜及其电化学性能的研究

用电纺的方法制备了聚偏氟乙烯纳米纤维膜,它们具有多微孔结构,能够作为锂电池聚合物电解质.电纺中聚合物溶液的浓度对制备的电纺膜的结构形态有很大的影响,低浓度(10 wt%)时得到珠丝结构的膜,浓度15 wt%时则为纤维结构,而高浓度(18 wt%)时,电纺膜为交联的网状结构.用电纺法制备的聚偏氟乙烯纳米纤维微孔膜具有较高的孔隙率,而且它们与锂金属电极具有良好的界面稳定性;在25℃时吸液率最高可达340%,以这种膜制备的聚合物电解质室温电导率可达到1.57×10-3S.cm-1;由该电解质组装的扣式电池以0.5 mA.cm-2恒流充放电,25℃时50次循环后几乎无容量损失,具有良好的循环性能;即使60℃时,电池仍能保持良好的工作稳定性.     

TiO2/P(VdF-HFP)杂化纤维微孔膜的制备及其电化学性能

用电纺法制备了TiO₂/P(VdF-HFP)(聚偏氟乙烯-六氟丙烯共聚物)杂化纤维微孔膜, 用SEM观察了杂化纤维微孔膜的形貌, 并测算了这类由超细纤维相互搭接而形成的微孔膜的孔隙率. 这种微孔膜吸附LiPF₆/EC-DMC-EMC(碳酸乙烯酯-二甲基碳酸酯-碳酸甲乙酯)电解质溶液后得到凝胶聚合物电解质膜. 用电化学方法测试了聚合物电解质膜的离子电导率、锂离子迁移数等参数, 并研究了TiO₂纳米晶的掺入对聚合物电解质电化学性能的影响. 结果表明, TiO₂的掺入降低了P(VdF-HFP)聚合物基体的结晶度, 改善了凝胶聚合物电解质的低温电化学性能.     

以水作相分离造孔剂制备P(VDF-HFP)/PMMA聚合物电解质膜

介绍了一种以水代替常用的有机物质作为相分离造孔剂制备混合型聚合物电解质的新方法.所研究的混合型聚合物为聚(偏二氟乙烯-六氟丙烯)和聚甲基丙烯酸甲酯的混合物.扫描电镜SEM图表明这种混合型聚合物膜具有蜂窝状结构,有利于膜电导率的增加.利用FTIR,XRD和DSC等方法研究了混合型聚合物电解质中两种聚合物间的相互作用.用电化学交流阻抗方法测得在30℃下P(VDF-HFP)/PMMA摩尔比为1:1的混合型聚合物电解质的离子电导率为0.804×10^-3S/cm.对照其它方法,本方法具有制备容易、成本较低和有利于环境保护等优点.     

基于偏氟乙烯-六氟丙烯共聚物凝胶电解质的染料敏化太阳电池光电性能研究

采用偏氟乙烯-六氟丙烯共聚物[P(VDF-HFP)]胶凝3-甲氧基丙腈基液体电解质, 成功制备了凝胶电解质并组装成准固态染料敏化太阳电池. 差示扫描量热测试结果表明凝胶电解质的溶液-凝胶转变温度(TSG)为71 ℃. 利用电化学方法分析了凝胶电解质中 电对的表观扩散系数及电导率低于液体电解质的原因, 同时结合暗态伏安法考察了电池内部TiO2多孔薄膜电极/电解质界面处的暗反应, 分析了凝胶化对电池光伏性能的影响. 进一步老化实验结果表明凝胶电池的稳定性明显优于液体电池.     

偏氟乙烯-三氟乙烯共聚物的分子链结构与多晶型现象

偏氟乙烯-三氟乙烯共聚物(PVDF/TrFE)的合成及物性研究,是改善聚偏氟乙烯(PVDF)压电性的一种尝试。据文献报道,PVDF/TrFE 有明显的铁电性,以及强的压电性     

四甲基氢氧化铵改性聚偏氟乙烯接枝苯乙烯磺化膜的制备和性能

使用四甲基氢氧化铵(TMAH)甲醇溶液在液相中改性聚偏氟乙烯(PVDF),挥发溶剂得到改性聚偏氟乙烯膜(g-PVDF-M),再以过氧化苯甲酰(BPO)为引发剂,将苯乙烯接枝到g-PVDF-M膜中,磺化后制得改性聚偏氟乙烯接枝苯乙烯磺化(PVDF-g-PSSA)膜.利用傅里叶变换红外光谱(FTIR)和能谱仪的扫描电子显微镜分析了PVDF-g-PSSA膜(TMAH-25)的结构、形貌及硫元素分布情况.通过电化学工作站和气相色谱仪研究了TMAH在甲醇中的不同含量对PVDF-g-PSSA膜质子电导率和甲醇渗透率的影响.结果表明,TMAH使PVDF脱去HF生成碳碳双键,并且苯乙烯接枝到改性的聚偏氟乙烯膜中,磺化后S元素在PVDF-g-PSSA膜内部均匀分布;PVDF-g-PSSA膜的质子电导率和甲醇渗透率随TMAH在甲醇溶液中质量分数的增加而增大;TMAH的质量分数为25%时,PVDF-g-PSSA膜的电导率达1.28×10~(-2)S/cm,甲醇渗透率为4.58×10~(-7)cm~2/s.热重分析(TGA)表明,PVDF-g-PSSA膜的热稳性良好,耐热温度高达195℃,PVDF-g-PSSA膜作为电解质材料的直接甲醇燃料单电池(DMFC)功率密度达到16.45 mW/cm~2.     

凝固浴温度对PVDF-g-PNIPAAm温度敏感膜成膜过程与性能的影响

通过自由基共聚的方法制备了聚偏氟乙烯-g-聚(N-异丙基丙烯酰胺)(PVDF-g-PNIPAAm)共聚物,采用浸没沉淀相转化法制备了PVDF-g-PNIPAAm共聚膜.采用超声时域反射法研究了不同凝固浴温度下PVDF-g-PNIPAAm的成膜动力学,并研究了凝固浴温度对膜结构与性能的影响.结果表明,在不同凝固浴温度下,...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.