水中有机污染物前处理方法进展

综述了水样中有机污染物前处理方法的进展情况；重点介绍液-液萃取、固相萃取、液相微萃取、膜萃取和顶空处理技术5种前处理方法的一些基本情况及其优缺点。     

样品前处理技术在气相色谱分析中的应用进展

气相色谱法是当前应用最广泛的分析技术之一。使用气相色谱对复杂基体进行分析时的样品前处理步骤往往繁琐耗时,易引起误差,已成为制约分析效率和准确度提升的关键环节。本文综述了2009-2013年几种主要的样品前处理技术,包括吹扫捕集、固相萃取、固相微萃取、液相微萃取技术以及微波辅助萃取、超声波辅助萃取等场辅助萃取技术在气相色谱分析中的应用研究进展。     

共价有机骨架材料在样品前处理中的研究进展

共价有机骨架（COFs）是由有机单体通过共价键连接形成的二维或三维晶体多孔结构。作为一种新兴的晶体多孔材料,COFs已经在气体储存、催化、传感、药物输送等各个领域广泛应用。近年来,COFs材料由于密度低、表面积大、结构可控等优点,在分析化学方面显示出巨大的潜力。该文综述了多孔COFs及其复合材料在样品前处理中的研究应用,包括分散固相萃取、固相微萃取和磁性固相萃取等。     

亚胺类共价有机骨架材料在样品前处理中的应用

亚胺类共价有机骨架(I-COFs)是有机单体根据席夫碱(Schiff-base)反应原理缩合形成的一类新型多孔晶体有机材料.I-COFs具有骨架密度低、比表面积大、孔隙率高、单体种类丰富、孔径尺寸可控、结构可功能化、合成方法多样和物化稳定性好等优点.近年来,I-COFs已成为材料科学领域的研究前沿,并广泛用于气体吸附、...     

新型样品前处理材料在环境污染物分析检测中的研究进展

针对复杂样品的分析和痕量目标物的检测,样品前处理是必不可少的,高效的样品前处理技术不仅可以去除或减小样品基质干扰而且能够实现分析物的富集,提高分析检测的准确性和灵敏度.近年来,固相萃取、磁分散固相萃取、枪头固相萃取、搅拌棒萃取、固相微萃取等高效的样品前处理技术已在环境污染物分析检测中获得广泛关注,萃取效率主要取决于萃取...     

微孔有机网络材料的合成方法及其在样品前处理中的应用进展

样品前处理是色谱分析中必不可少的环节。固相萃取是一类应用广泛的前处理方法,吸附剂的优劣直接影响萃取过程对目标化合物的吸附和富集效率,并影响前处理及后续分析方法的灵敏度和选择性。因此吸附剂的选择和开发成为一个研究热点。微孔有机网络(microporous organic networks,MONs)是由芳香炔烃和芳香卤化物通过Sonogashira反应合成的一类新型共价有机材料,具有结构可修饰、比表面积大、孔隙率高、合成简单等优点。本文概述了MONs的合成和功能化修饰方法,着重介绍了该材料在样品前处理领域的应用新进展,并对其发展趋势进行了展望。在合成方法方面,MONs材料的制备从回流合成法、溶剂热合成法发展到室温合成法,合成条件趋向于更温和、更高效。在材料功能化修饰方面,引入大分子物质以及氨基、羟基、羧基等活性基团,能增加MONs材料的选择性和作用位点;将MONs与Fe₃O₄、SiO₂、MOFs结合,形成核壳结构MONs,在此基础上进行煅烧和刻蚀,可形成多孔碳结构或空心多层材料。上述功能化修饰的MONs及其复合材料和目标物...     

用于食品安全分析样品前处理的共价有机聚合物的制备及应用进展

食品安全关系身体健康和生命安全,是全球关注的热点之一。食品基质复杂,痕量有毒有害物质分析之前必须经过有效的前处理。目前发展的前处理技术如固相萃取、磁固相萃取、固相微萃取等,其关键是吸附介质。共价有机聚合物是一类通过共价键连接而成的有机多孔材料,具有质轻、稳定性好、比表面积大、结构可控、易于修饰等特性,是一类优异的新型吸附材料。该文综述了近年来共价有机聚合物(COPs)在食品安全分析前处理中的应用进展。共价有机聚合物及其功能化复合材料通过简单的装填、聚合反应或化学键合固定到小柱或毛细管柱中用作固相萃取的吸附介质;通过一锅法、原位还原法、原位生长法或共沉淀法生成具有磁性的固相萃取吸附介质;或者通过物理涂覆、化学键合、溶胶凝胶法及原位生长法制备固相微萃取纤维。基于以上高吸附容量共价有机聚合物的样品前处理技术,食品中农残兽残、添加剂、环境污染物及生物毒素等得到了有效富集。最后,展望了COPs在食品分析样品前处理应用中的发展方向:简单高效绿色制备方法的开发,功能化COPs的设计合成;萃取机理的研究;高通量、高灵敏度分析方法研究。这些研究将促进COPs在样品前处理领域获得更广泛的应用。     

微孔有机聚合物在样品前处理技术中应用的研究进展

微孔有机聚合物（microporous organic polymers,MOPs）是一类由轻元素组成的新型多孔材料,具有骨架密度低、比表面积大、孔尺寸可调控、表面可修饰、化学和物理性质稳定等优点。近年来,MOPs在样品前处理领域展现出巨大的应用潜力。本文综述了MOPs的结构类型及合成方法,以及MOPs在固相萃取、批处理吸附萃取、整体柱和传感膜等样品前处理技术中的应用。     

共价有机框架材料在固相萃取中的最新应用进展

固相萃取技术是一种快速简便的样品前处理技术,能够实现分析物的富集,提高分析检测的准确性和灵敏度,已被广泛应用于食品安全检测、环境污染物分析等领域。如何提高方法的灵敏度和选择性是样品前处理领域的不懈追求,其关键在于萃取材料的选择。共价有机框架(COFs)材料是一类晶态多孔聚合物,其首先经热力学控制的可逆聚合反应形成连锁单元,然后与具有一定对称性的有机小分子构筑单元连接而形成,已被广泛应用于气体吸附、催化、传感、药物输送等领域。COFs具有比表面积大、孔隙率高、稳定性好、可设计性强以及合成简单、选择性高等优点,在样品前处理领域中引起了广泛关注。目前,COFs作为一种新型固相萃取材料,已被应用于食品、环境、生物样品中不同类别污染物的萃取富集,如重金属离子、多环芳烃、苯酚、氯酚、氯苯、多溴联苯醚、雌激素、药物残留、农药残留等。采用不同单体合成的COFs对于不同类型分析物具有不同的富集效果,因此也可以通过对其进行修饰合成一种新型COFs,以达到对某种结构分析物的高效选择性富集。本文将介绍COFs的主要类型及合成方法,并重点介绍近3年来COFs作为固相萃取材料在食品、环境、生物领域方面的重要应用,...     

全二维气相色谱分析持久性有机污染物的应用进展

持久性有机污染物（POPs）组分复杂,在自然界中超痕量存在,其分离分析十分困难。全二维气相色谱（GC×GC）作为一种新型色谱技术,与传统的一维气相色谱相比,具有峰容量大、分辨率和灵敏度高等优势,越来越广泛地应用于环境有机污染物的分析。该文综述了近十年来全二维气相色谱在持久性有机污染物分析中的应用进展,主要包括全二维气相色谱在解决一些复杂POPs定性定量分析难题方面的应用,如二恶英、毒杀芬和短链氯化石蜡等;概述了全二维气相色谱对多种POPs同时定性定量分析的应用进展;讨论了全二维气相色谱在非目标有机污染物筛查分析中的应用,并对发展趋势及相关应用前景进行了总结展望。     

新型污染物的环境质谱技术研究进展

随着科学技术的飞速发展,质谱检测及其联用技术方法正以前所未有的速度、广度和深度全面渗透到环境分析化学中,其在环境监测中的使用已经或正在日常化.近年来,一些高分辨质谱及其与色谱等的联用技术在目标污染物和非目标污染物的同时甄别鉴定和分析中发挥了重要作用,其对于阐明污染物在环境的归趋具有重要意义.本文对质谱技术及其与气相色谱和液相色谱的联用技术在污染物尤其是新型污染物分析中的进展进行了总结,并对高分辨质谱技术的环境应用研究给于关注,对环境质谱技术的发展方向进行了展望.     

食品及环境样品中双酚类物质的前处理及检测方法研究进展

双酚类物质作为一种环境内分泌干扰物,广泛存在于食品包装材料及环境介质中,对生态环境造成污染,也对人体健康产生一定危害。双酚残留是目前重要的食品安全问题,检测食品和环境样品中的双酚类物质的含量对人体健康具有重要的意义。由于残留目标物浓度通常较低,且实际样品存在基质干扰,因此需经一定的样品前处理,并结合仪器分析方法,提高检测效率,增强分析灵敏度与可靠性。常用的前处理分析方法主要有液液萃取、微波辅助萃取、固相萃取、固相微萃取、基质分散固相萃取、QuEChERS等,常用仪器分析方法包括液相色谱法、气相色谱法、毛细管电泳法、酶联免疫吸附测定法、生物传感器法等。该文综述了食品及环境样品中双酚类物质的样品前处理及仪器分析方法,为双酚类化合物的残留监测提供了参考依据。     

Overview of nanosorbents used in solid phase extraction techniques for the monitoring of emerging organic contaminants in water and wastewater samples

In this article, we have critically overviewed some interesting articles published in 2015–2019 about the use of the nanosorbents for the extraction of emerging organic contaminants (EOCs) from various environmental samples. Properties, advantages, disadvantages, and the applicability of different categories of nanosorbents used for the extraction of EOCs are evaluated and discussed. The potential applications of these nanomaterials as adsorptive phase in solid-phase extraction (SPE) based techniques are reviewed.     

Analytical methods for the determination of emerging organic contaminants in the atmosphere

Concerns over the occurrence and transport of emerging organic contaminants (EOCs) from local sources to remote regions have resulted in wide developments in sampling strategy and analytical methodology for the determination of trace concentrations of EOCs in the atmosphere. This article discusses developments in the determination of EOCs in ambient air which includes polyfluorinated alkyl substances (PFASs), brominated-flame retardants (BFRs), synthesis musk fragrances, and alkylphenols (APs). References were mainly summarized from the past 5 years (2002 up to present) on new developments of sampling methods, extraction, separation/fractionation and/or applications of new technologies for sampling and determination.     

Recent advances in analytical methodologies based on mass spectrometry for the environmental analysis of halogenated organic contaminants

Halogenated organic contaminants, including legislated and potential persistent organic pollutants and their precursors, represent a major environmental concern due to their hazardous effects in humans and wildlife as well as their ability to bioaccumulate through the food chain, their high resistance to environmental degradation, and their long-range atmospheric transport potential. The monitoring of these compounds in the environment at ultra-trace concentration levels requires highly selective and sensitive analytical methodologies. The lack of reference step-by-step methods led to a high number of reliable determinations depending on analytes, the complexity of the sample, and available instrumentation. Thus, this review article is mainly focused on the last advances in the analytical methodologies for the determination of halogenated organic contaminants. Methodologies regarding sample treatment, chromatographic separation, and mass spectrometry analysis have been reviewed to finally highlight the future perspectives for the improvement of the analytical determinations of these compounds and the throughput of environmental control laboratories in this field.     

Analysis of emerging organic contaminants in environmental solid samples

Spreading sewage sludge on agricultural lands has been actively promoted by national authorities as an economic way of recycling. However, as by-product of wastewater treatment, sewage sludge may contain toxic substances, which could be incorporated into agricultural products or be distributed in the environment. Moreover, sediments can be contaminated by the discharge of wastewater effluents into rivers. This article reviews the determination of emerging contaminants (surfactants, flame retardants, pharmaceuticals and personal care products) in environmental solid samples (sludge, soil and sediment). Sample preparation, including extraction and clean-up, as well as the subsequent instrumental determination of contaminants are discussed. Recent applications of extraction techniques, such as Soxhlet extraction, ultrasound assisted extraction, pressurised liquid extraction, microwave assisted extraction and matrix solid-phase dispersion to the analysis of emerging contaminants in environmental solid samples are reviewed. Determination of these contaminants, generally carried out by gas chromatography and liquid chromatography coupled with different detectors, especially mass spectrometry for the identification and quantification of residues, is also summarised and discussed.      

Strategies for monitoring the emerging polar organic contaminants in water with emphasis on integrative passive sampling

Although polar organic contaminants (POCs) such as pharmaceuticals are considered as some of today's most emerging contaminants few of them are regulated or included in on-going monitoring programs. However, the growing concern among the public and researchers together with the new legislature within the European Union, the registration, evaluation and authorisation of chemicals (REACH) system will increase the future need of simple, low cost strategies for monitoring and risk assessment of POCs in aquatic environments. In this article, we overview the advantages and shortcomings of traditional and novel sampling techniques available for monitoring the emerging POCs in water. The benefits and drawbacks of using active and biological sampling were discussed and the principles of organic passive samplers (PS) presented. A detailed overview of type of polar organic PS available, and their classes of target compounds and field of applications were given, and the considerations involved in using them such as environmental effects and quality control were discussed. The usefulness of biological sampling of POCs in water was found to be limited. Polar organic PS was considered to be the only available, but nevertheless, an efficient alternative to active water sampling due to its simplicity, low cost, no need of power supply or maintenance, and the ability of collecting time-integrative samples with one sample collection. However, the polar organic PS need to be further developed before they can be used as standard in water quality monitoring programs.     

Organolead speciation in environmental samples: a review

The speciation of organolead in some environmental samples is reviewed. Sampling, storage and pretreatment methods for water, soil, sediment and air samples are discussed before an assessment of recent developments in analytical methods.     

基于色谱-质谱联用的新型有机污染物分析方法与技术

新型有机污染物是目前国内外关注的热点。在发现和分析新型有机污染物方面色谱-质谱联用技术发挥着至关重要的作用。本文对5类新型有机污染物(全氟化合物、药物、饮用水消毒副产物、农药转化产物和新农药、溴化阻燃剂)的主要色谱-质谱联用技术进行了介绍和评价,并对色谱-质谱联用的发展趋势进行了展望。     

Strategies for the microextraction of polar organic contaminants in water samples

In this paper the most recent developments in the microextraction of polar analytes from aqueous environmental samples are critically reviewed. The particularities of different microextraction approaches, mainly solid-phase microextraction (SPME), stir-bar-sorptive extraction (SBSE), and liquid-phase microextraction (LPME), and their suitability for use in combination with chromatographic or electrically driven separation techniques for determination of polar species are discussed. The compatibility of microextraction techniques, especially SPME, with different derivatisation strategies enabling GC determination of polar analytes and improving their extractability is revised. In addition to the use of derivatisation reactions, the possibility of enhancing the yield of solid-phase microextraction methods for polar analytes by using new coatings and/or larger amounts of sorbent is also considered. Finally, attention is also focussed on describing the versatility of LPME in its different possible formats and its ability to improve selectivity in the extraction of polar analytes with acid-base properties by using separation membranes and buffer solutions, instead of organic solvents, as the acceptor solution.