水下隔声结构设计及评价方法

为使用混响法快捷地测量水下结构物的辐射噪声,需基于港口或海岸建造海上混响水池。针对内外都是水情况下的海上混响水池壁面隔声问题,设计了一种带梁空气夹层板水下隔声结构,通过仿真比较了不同参数的空气夹层板的隔声性能。为评价声波无规入射情况下水下大尺寸隔声结构隔声性能,提出了一种混响评价方法,通过隔声实验比较了混响法与脉冲法的不同。结果表明：带梁空气夹层板的水下隔声性能优异,声波无规入射情况下,面板厚度0.015 m、空气层厚度0.020 m的带梁空气夹层板在2～10 kHz频段插入损失大于20 dB;混响法可以有效评价大尺寸水下隔声结构的平均隔声性能,其反映的声波无规入射的平均隔声性能更接近于实际应用情况。     

四边简支含多孔材料双层板隔声特性

有限大含多孔材料和空气层复合板结构隔声特性的研究尚不充分。该文旨在研究四边简支边界条件下复合板结构隔声特性。首先基于流体饱和多孔弹性介质的声传播理论计算了声波在多孔介质中的传播波数；继而采用四边简支边界条件下板结构的模态函数，利用模态叠加法和伽辽金法推导了复合板结构隔声系数理论模型，并数值求解复合板隔声量。将理论模型得到的四边简支复合板隔声量与实验结果对比，验证了理论模型的正确性。最后，详细讨论了边界条件、板结构尺寸和多孔材料厚度等主要参数对隔声特性的影响。结果表明：四边简支复合结构隔声特性曲线上“谷值”出现得较少，并且简支复合板隔声特性的第一个“吻合频率”比固支支撑复合板更靠近低频，当频率超过3000 Hz以后，简支和固支边界条件复合板结构隔声特性趋于一致。     

提高轻板隔墙的隔声性能

影响轻板隔墙隔声性能的因素是多方面的.本文着重研究了降低龙骨的传声、附加构造的作用以及墙板的选择等方面.文中通过理论分析和实验比较,说明这些措施对提高轻板隔墙的隔声性能是有效而可行的.     

基于深度学习的低频宽带隔声器件设计*

在实际应用中，通常需要将多个声人工结构单元进行组合来实现低频宽带的隔声降噪。这种组合结构往往参数较多，传统的设计方法很难对其进行高效的自动化设计。本文在集总参数模型的基础上，提出了一种基于深度学习的低频宽带隔声器件设计方法，并基于该方法完成了由9个二阶亥姆霍兹共鸣器单元组合而成的低频宽带隔声装置的设计。仿真结果表明，该隔声装置在158 Hz~522 Hz范围内均具有良好的隔声效果，从而验证了所提出方法的有效性。与传统方法相比，本文所提出的设计方法不仅减少了对设计者专业知识和设计经验的依赖，而且具有更高的设计效率，更强的通用性，未来有望进一步推广至其他声人工结构的设计领域。     

水下目标弹性声散射信号分离

水下目标弹性声散射与其他声散射成分在时域和频域上均存在混叠, 现有信号处理方法受分辨力限制无法在混叠状态下识别目标弹性声散射特征. 针对这个问题, 提出了一种目标弹性声散射信号分离方法. 以目标回波亮点模型为基础, 分析了线性调频信号入射时目标声散射成分的信号特性, 提出了一种目标声散射成分向单频信号的映射方法, 并理论推导出了目标声散射结构与映射结果之间的线性对应关系, 实现了通过窄带滤波分离出目标弹性声散射成分. 仿真与消声水池实验数据处理结果表明, 该方法基本可以完全分离出目标回波信号中的弹性声散射成分, 分离出的弹性声散射具有与理论一致的信号特征, 验证了该分离方法的有效性.     

水下弹性微穿孔吸声结构吸声系数研究

利用模态叠加法建立了水介质微穿孔板的数学模型,基于声电类比法得到其等效电路模型。研究了弹性微穿孔板和弹性背腔对垂直入射吸声系数的影响。与空气介质中的微穿孔板不同,水下微穿孔板因结构阻抗不足,难以取得满意的吸声效果,为此提出了增强型微穿孔吸声结构,并在水介质阻抗管内对理论结果予以验证。结果表明,随着增强型弹性微穿孔板弯曲刚度的增大,其在[20,2000]Hz范围内的平均吸声系数得到提高,逐步趋近于刚性微穿孔板的结果,弹性背板使微穿孔吸声结构的吸声峰向低频移动,低频吸声效果得到提高。     

微穿孔板吸声结构水下应用研究

马大猷教授提出的微穿孔板吸声结构在空气噪声降低和隔离方面得到了广泛的应用,但未见水下应用的相关研究和报道。本文将空气中微穿孔板理论应用到水中,得到了水下微穿孔板吸声结构的吸声公式。通过理论分析,得出了微穿孔板结构直接应用于水中无法获得宽频吸收的结论。提出了通过匹配液将微穿孔板间接应用到水下的设想。设计了单层板和双层板吸声结构,并对它们的吸声特性进行了理论分析与仿真。结果表明,本文设计的微穿孔板吸声结构在水中能够获得优于空气中的宽频带吸声效果。实验测量了自制的微穿孔板吸声结构,吸声系数的测量值与理论曲线基本吻合,从而验证了理论分析的正确性。     

轻质金属三明治板的隔声性能研究

基于金属三明治板的周期特性,建立了其夹芯层等效弹簧和扭簧组合模型。利用所建立的模型和空间谐波展开法,首先研究了中间为空气腔的双层板的隔声性能,理论结果与实验结果取得较好的一致,验证了模型的合理性;并进一步研究了中间层为瓦楞加筋三明治板的隔声性能。结果表明,声波入射角以及瓦楞加筋板与平板的夹角对其隔声性能影响显著,适当改变瓦楞加筋板与平板的夹角可以有效避开结构的隔声低谷;三明治板对垂直入射声波的隔声效果最好。     

含玻璃微球的黏弹性复合材料覆盖层的水下吸声性能分析

水下吸声覆盖层对潜艇的隐身具有重要的意义, 因此得到了广泛的关注. 本文对含有玻璃微球的黏弹性复合材料覆盖层的水下吸声性能进行了理论分析. 采用等效参数法计算了玻璃微球的体积含量对复合材料的力学和声学性能的影响. 应用声波在多层介质中传播的一维模型, 计算了不同玻璃微球体积含量的单层复合材料覆盖层的吸声性能.结果表明, 增加玻璃微球的体积含量可以提高覆盖层的低频吸声性能, 但是其高频吸声性能降低.采用遗传算法对玻璃微球在覆盖层厚度方向上的体积含量分布进行优化. 优化的多层结构可以在一定的频带内改善覆盖层的表面与水的声阻抗匹配, 在保证覆盖层的高频吸声系数大于某一限值(0.7)的前提下, 提高其低频吸声性能.另外, 多层优化结构覆盖层不含宏观的空腔结构, 不影响覆盖层的耐压性能.其结构简单, 对制备工艺的要求不高.因此, 本文形成的理论方法适用于水下吸声覆盖层的设计. 关键词： 水下吸声 黏弹性复合材料 玻璃微球 遗传算法     

弹性支撑双稳压电悬臂梁振动响应及能量采集研究

在分析了常规刚性支撑非线性能量采集系统的研究基础上,提出外部磁铁弹性支撑的结构设想,保证系统在低强度激励条件下也能处于双稳态振荡,提高机电能量转换效率.研究表明,对于强度变化的随机激励历程,弹性支撑非线性能量采集系统不需要实时调整磁铁间距,能够更好地迎合强度时刻变化的随机激励源,实现高效的机电能量转换.     

非对称夹芯板隔声量的解析计算模型及影响因素

提出了一种计算上下面板非对称的三明治夹芯板隔声性能的方法。通过对非对称夹芯梁表观抗弯曲刚度的计算,得到对应夹芯板随频率变化的表观抗弯刚度,代入4阶的控制方程,应用模态展开法可以方便地计算简支非对称夹芯板的隔声量。对4种定制的3层非对称碳纤维夹芯板进行了理论计算和实验测试对比,在频率范围100~3150 Hz内,计权隔声量误差在3 dB以内。着重分析了面板对称性、芯层剪切模量对隔声性能的影响,发现在夹芯板面密度一定时,芯层剪切模量对夹芯板的隔声性能影响最为显著。当芯层剪切模量较小时,上下面板非对称分布导致吻合频率显著降低,对夹芯板的整体隔声亦不利。     

墙体设置接线盒隔声性能影响的实验室研究

在轻质墙体(轻钢龙骨类板墙)及重质墙体(240 mm砖墙)上设置不同数量的接线盒前后,对墙体的空气声隔声性能的影响进行了实验室试验。并对试验结论进行了分析,得出了不同类型墙体设置接线盒后,对墙体空气声隔声性能的影响因素及处理方法。     

Development of multiple drywall with high sound insulation performance

Experimental studies for the development of multiple drywalls with a high sound insulation performance are performed. Firstly, a means of preventing the sound insulation deterioration due to the coincidence effect at high frequencies is investigated by layering two plasterboards with different physical characteristics. Based on the results, a double drywall with a sound insulation performance of R_w = 61 is developed. Further more, a double drywall of R_w = 64 , a triple drywall of R_w = 86 and a quadruple drywall of R_w = 90 are developed.     

Justification of standardized level differences in rating of airborne sound insulation between dwellings

It has long been recognized that single-number quantities R′_w, D_nT,w or D_n,w result in different conclusions in objective rating of airborne sound insulation between dwellings. The difference between the values of these single-number quantities (SNQ), however, does not prove which of them describes the sound transmission between rooms most correctly. The main object of this article was to study which SNQ correspond best with transmitted living sound levels in buildings when reverberation time, volume of receiving room and sound insulation are taken into account. Data of 100 field measurements of airborne sound insulation were collected as well as 207 reverberation times of furnished rooms. The transmitted sound levels of living sounds were evaluated on the basis of known living sound spectra and measured level differences D. The results show that the SNQs standardized to reference reverberation time of 0.5 s lead in all cases to best correlation between the SNQs and the sound levels of transmitted living sounds. It was also checked whether the rating by D_nT,w would lead to higher transmitted sound levels of living sounds in larger rooms, but this was not detected. The use of D_nT,w makes rooms of different volumes equal in regard to required sound insulation between them. It is thus justified to replace R′_w with D_nT,w as the SNQ for rating the airborne sound insulation. Widening the frequency range down to 50 Hz or up to 5000 Hz did not give noteworthy improvement in the correlation.     

The use of in-situ test method EN 1793-6 for measuring the airborne sound insulation of noise barriers

The in situ measurement of the airborne sound insulation, as outlined in EN 1793-6:2012, is becoming a common means of quantifying the performance of road traffic noise reducing devices. Newly installed products can be tested to reveal any construction defects and periodic testing can help to identify long term weaknesses in a design. The method permits measurements to be conducted in the presence of background noise from traffic, through the use of impulse response measurement techniques, and is sensitive to sound leakage. Factors influencing the measured airborne sound insulation are discussed, with reference to measurements conducted on a range of traffic noise barriers located around Auckland, New Zealand. These include the influence of sound leakage in the form of hidden defects and visible air gaps, signal-to-noise ratio, and noise barrier height. The measurement results are found to be influenced by the presence of hidden defects and small air gaps, with larger air gaps making the choice of measurement position critical. A signal-to-noise ratio calculation method is proposed, and is used to show how the calculated airborne sound insulation varies with signal-to-noise ratio. It is shown that the measurement results are influenced by barrier height, through the need for reduced length Adrienne temporal windows to remove the diffraction components, prohibiting the direct comparison of results from noise barriers with differing heights.     

用于三层有源隔声结构误差传感的压电传感薄膜阵列及其优化设计

基于平面声源的三层有源隔声结构系统易于实现且具有良好的低频隔声性能,实现该系统需解决的关键问题是误差信号的检测.本文将压电传感薄膜聚偏氟乙烯(polyvinylidene fluoride, PVDF)阵列检测简支梁辐射模态的理论拓展到二维结构, 并应用到三层隔声结构实现误差传感的优化设计.根据三层结构中特殊的能量传输规律, 对误差传感方案中目标函数的选取、PVDF数目确定以及传感系统优化等问题进行深入分析.研究表明, 由于辐射板能量主要集中在有限个振动模态上, 只需将少数经固定系数加权的PVDF薄膜输出电流求和即可获得前三阶辐射模态幅值.辐射模态幅值的检测值与理论值符合良好, 保证传感精度的同时有效简化了系统. 关键词： 三层有源隔声结构 误差传感策略 压电传感薄膜阵列 辐射模态     

Impact sound insulation and viscoelastic properties of underlay manufactured from recycled carpet waste

This paper reports an investigation of the impact sound insulation performance of a range of materials made from recycled carpet tiles and provides a comparison with the performance of some commercially available acoustic underlays. The impact testing is carried out using a specially designed rig. It is demonstrated that good quality acoustic materials can be successfully manufactured from a granulated mix of industrial carpet waste. The effects of the grain to fibre (G:F) mass ratio, binder concentration and particle size distribution on the acoustic performance is investigated. It is shown that the optimum G:F ratio should be close to the mass ratio of the backing material to the pile material in many types of commercial carpet tiles (60:40). Sieving the granular waste and producing samples containing a single class of particle size does not enhance the impact sound insulation performance. These are important findings, which should ensure an efficient, cost-effective, full-scale manufacturing process. A formulation has been developed which yields samples with optimum impact sound insulation capability. This optimised sample compares favourably with the commercial underlays tested on the impact rig. The dynamic mechanical properties of the developed underlays have also been investigated to provide a better understanding of their influence on the impact sound insulation.     

住宅建筑中相邻房间的侧向传声预测

侧向传声作为建筑中声传递的组成部分,对住宅的整体隔声效果具有重要的影响,通过将建筑中相邻房间的各建筑构件划分为若干子系统,应用统计能量分析(Statistical Energy Analysis,SEA)理论,从系统的声功率平衡的角度建立侧向传声的预测模型,在描述各路径的传声规律的同时确定主要传声路径。研究结果表明:当外围护结构为重质结构,且为匀质单一材料构造时,(1)在低频处,全程通过两相邻房间的侧墙或楼板的非通过隔墙的侧向路径成为主要侧向传声路径;(2)在中高频,各侧向路径的声压级差趋于一致,此时的建筑隔声性能取决于通过隔墙的直接路径上的声传递;(3)采用重质隔墙可以缩小侧向传声影响的频率范围。本研究为改善住宅的声环境质量及建筑隔声设计提供了理论依据。     

实验室隔声测量中试件洞填隙墙传声影响的检验

文章探讨了实验室建筑构件隔声测量中填隙墙传声影响的检验与修正方法。通过实验分析,给出了三种可用于不同隔声量构件的门、窗和玻璃试件隔声测量的填隙墙构造方式。