Rhenium complexes with 2-(diphenylphosphinomethyl)aniline: formation of a cyclic, trinuclear oxorhenium(V) core

Reactions of 2-(diphenylphosphinomethyl)aniline, H(2)L(2), with (NBu(4))[ReOCl(4)] yield different oxo rhenium(V) complexes depending on the conditions applied. This comprises monomeric compounds such as [ReOCl(3)(H(2)L(2))] (1), [ReOCl(2)(OMe)(H(2)L(2))] (2), or [ReO(2)(H(2)L(2))(2)]Cl (5) as well as the dimeric μ-oxo complex [{ReOCl(2)(H(2)L(2))}(2)]O] (3) and the oxo-bridged trimer [{ReOCl(H(2)L(2))}O](3) (4). The latter compound represents the first example of a hitherto unknown trinuclear, cyclic oxo(V) core. [{ReOCl(H(2)L(2))}O](3) contains a tensed 6-membered metallacycle, which readily undergoes rearrangements and reactions with additional ligands. Compounds of the compositions 5 and [ReO(2)(H(2)L(2))(H(2)L(1))]Cl (6) were isolated either from the decomposition of 4 in CH(2)Cl(2)/n-pentane or from reactions with 2-(diphenylphosphino)aniline, H(2)L(1).     

Rhenium and technetium complexes with N,N-dialkyl-N'-benzoylthioureas

N,N-Dialkyl-N'-benzoylthioureas, HR(1)R(2)btu, react under single deprotonation and form air-stable chelate complexes with common rhenium or technetium complexes such as (NBu(4))[MOCl(4)] (M = Re, Tc) or [ReOCl(3)(PPh(3))(2)]. Compositions and molecular structures of the products are strongly dependent on the precursors used and the reaction conditions applied. Reactions with [ReOCl(3)(PPh(3))(2)] in CH(2)Cl(2) give complexes of the general formula [ReOCl(2)(R(1)R(2)btu)(PPh(3))] (3), with the benzoyl oxygen atom of the chelating benzoylthiourea being trans to the oxo ligand, and/or Re(III) complexes of the composition [ReCl(2)(R(1)R(2)btu)(PPh(3))(2)] (4) with the PPh(3) ligands in trans positions to each other. In polar solvents such as MeOH, EtOH or acetone, corresponding reactions without addition of a supporting base only result in intractable brown solutions, from which no crystalline complexes could be isolated. The addition of NEt(3), however, allows the isolation of the bis-chelates [ReOCl(R(1)R(2)btu)(2)] (1) in good yields. In this type of complex, one of the chelating R(1)R(2)btu- ligands coordinates equatorially, while the second occupies the position trans to the oxo ligand with its oxygen atom. The latter compounds can also be prepared from (NBu(4))[ReOCl(4)] in MeOH when no base is added, while the addition of NEt(3) results in the formation of [ReO(OMe)(R(1)R(2)btu)(2)] (5) complexes with the methoxo ligand trans to O(2-). Compounds of the type 5 can alternatively be prepared by heating 1 in MeOH with addition of NEt(3). A reversible conversion of 5 into oxo-bridged dimers of the composition [{ReO(R(1)R(1)btu)(2)}(2)O] (6) is observed in water-containing solvents. Starting from (NBu(4))[TcOCl(4)], a series of technetium complexes of the type [TcOCl(R(1)R(2)btu)(2)] (2) could be prepared. The structures of such compounds are similar to those of the rhenium analogues 1. Reduction of 2 with PPh(3) in CH(2)Cl(2) gives Tc(III) complexes of the composition [TcCl(R(1)R(2)btu)(2)(PPh(3))] (7) having the chloro and PPh(3) ligands in cis positions. When this reaction is performed in the presence of excess chelating ligand, the Tc(III) tris-chelates [Tc(R(1)R(2)btu)(3)] (8) are formed.     

Iron(II) complexes with tetradentate bis(aminophenolate) ligands: synthesis and characterization, solution behavior, and reactivity with O(2)

Tetradentate bis(aminophenolate) ligands H(2)salan(X) and H(2)bapen(X) (where X refers to the para-phenolate substituent = H, Me, F, Cl) react with [Fe{N(SiMe(3))(2)}(2)] to form iron(II) complexes, which in the presence of suitable donor ligands L (L = pyridine or THF) can be isolated as the complexes [Fe(salan(X))(L)(2)] and [Fe(bapen(X))(L)(2)]. In the absence of donor ligands, either mononuclear complexes, for example, [Fe(salan(tBu,tBu))], or dinuclear complexes of the type [Fe(salan(X))](2) are obtained. The dynamic coordination behavior in solution of the complexes [Fe(salan(F))(L)(2)] and [Fe(bapen(F))(L)(2)] has been investigated by VT (1)H and (19)F NMR spectroscopy, which has revealed equilibria between isomers with different ligand coordination topologies cis-α, cis-β and trans. Exposure of the iron(II) salan(X) complexes to O(2) results in the formation of oxo-bridged iron(III) complexes of the type [{Fe(salan(X))}(2)(μ-O)] or [{Fe(salan(X))(L)}(2)(μ-O)]. The lack of catalytic activity of the iron(II) salan and bapen complexes in the oxidation of cyclohexane with H(2)O(2) as the oxidant is attributed to the rapid formation of stable and catalytically inactive oxo-bridged iron(III) complexes.     

Rhenium complexes of tris(pyrazolyl)methanes and sulfonate derivative

The trioxo [ReO(3){SO(3)C(pz)(3)}] (1) (pz = pyrazolyl) and oxo [ReOCl{SO(3)C(pz)(3)}(PPh(3))]Cl (2) compounds with tris(pyrazolyl)methanesulfonate were obtained by treatment of Re(2)O(7) or [ReOCl(3)(PPh(3))(2)], respectively, with Li[SO(3)C(pz)(3)], whereas [ReCl(3){HC(pz)(3)}] (3), [ReCl(3){HC(3,5-Me(2)pz)(3)}] (4) and [ReCl(4){eta(2)-HC(pz)(3)}] (5) were prepared by reaction of [ReOCl(3)(PPh(3))(2)] (3,4) or [ReCl(4)(NCMe)(2)] (5) with hydrotris(pyrazolyl)methane HC(pz)(3) (3,5) or hydrotris(3,5-dimethyl-1-pyrazolyl)methane HC(3,5-Me(2)pz)(3) (4). [ReO{SO(3)C(pz)(3)}{OC(CH(3))(2)pz}][ReO(4)] 6, with a chelated pyrazolyl-alkoxide, was derived from an unprecedented ketone-pyrazolyl coupling on reaction of crude 1 with acetone. The compounds have been characterized by elemental analyses, IR and NMR spectroscopies, FAB-MS spectrometry and cyclic voltammetry and, in the case of 5 and 6, also by single-crystal X-ray diffraction. The electrochemical E(L) Lever parameter has been estimated, for the first time, for the SO(3)C(pz)(3)(-) and oxo ligands allowing the measurement of their electron-donor character and comparison with other ligands. Compounds 1, 2 and 6 appear to be the first tris(pyrazolyl)methanesulfonate complexes of rhenium to be reported.     

Rhenium(V) oxo complexes with N-heterocyclic carbenes

Air-stable rhenium(V) oxo complexes are formed when [ReOCl(3)(PPh(3))(2)] is treated with N-heterocyclic carbenes of the 1,3-dialkyl-4,5-dimethylimidazol-2-ylidene type, L(R) (R = Me, Et, i-Pr). Complexes of the compositions [ReO(2)(L(R))(4)](+), [ReOCl(L(R))(4)](2+), or [ReO(OMe)(L(R))(4)](2+) can be isolated depending on the alkyl substituents at the nitrogen atoms of the ligands and the reaction conditions applied. Despite the steric overcrowding of the equatorial coordination spheres of the metal atoms by each of the four carbene ligands, stable complexes with six-coordinate rhenium atoms are obtained. Steric demands of the alkyl groups allow control of the stability of the mono-oxo intermediates. Air-stable cationic complexes of the compositions [ReOCl(L(Me))(4)](2+), [ReOCl(L(Et))(4)](2+), and [ReO(OMe)(L(Me))(4)](2+) have been isolated, whereas reactions of [ReOCl(3)(PPh(3))(2)] or other rhenium(V) precursors with the more bulky 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene (L(i)(-)(Pr)) directly yield the dioxo complex [ReO(2)(L(i)(-)(Pr))(4)](+). X-ray structures of [ReO(2)(L(i)(-)(Pr))(4)][ReO(4)], [ReO(2)(L(i)(-)(Pr))(4)][PF(6)], [ReO(2)(L(Me))(4)][ReO(4)](0.45)[PF(6)](0.55), [ReO(MeOH)(L(Me))(4)][PF(6)](2), and [ReOCl(L(Et))(4)][PF(6)](2) show that the equatorial coordination spheres of the rhenium atoms are essentially planar irrespective of the steric demands of the individual carbene ligands.     

Synthesis, structure, and reactivity of ruthenium carboxylato and 2-oxocarboxylato complexes bearing the bis(3,5-dimethylpyrazol-1-yl)acetato ligand

A series of ruthenium(II) acetonitrile, pyridine (py), carbonyl, SO2, and nitrosyl complexes [Ru(bdmpza)(O2CR)(L)(PPh3)] (L = NCMe, py, CO, SO2) and [Ru(bdmpza)(O2CR)(L)(PPh3)]BF4 (L = NO) containing the bis(3,5-dimethylpyrazol-1-yl)acetato (bdmpza) ligand, a N,N,O heteroscorpionate ligand, have been prepared. Starting from ruthenium chlorido, carboxylato, or 2-oxocarboxylato complexes, a variety of acetonitrile complexes [Ru(bdmpza)Cl(NCMe)(PPh3)] (4) and [Ru(bdmpza)(O2CR)(NCMe)(PPh3)] (R = Me (5a), R = Ph (5b)), as well as the pyridine complexes [Ru(bdmpza)Cl(PPh3)(py)] (6) and [Ru(bdmpza)(O2CR)(PPh3)(py)] (R = Me (7a), R = Ph (7b), R = (CO)Me (8a), R = (CO)Et (8b), R = (CO)Ph) (8c)), have been synthesized. Treatment of various carboxylato complexes [Ru(bdmpza)(O2CR)(PPh3)2] (R = Me (2a), Ph (2b)) with CO afforded carbonyl complexes [Ru(bdmpza)(O2CR)(CO)(PPh3)] (9a, 9b). In the same way, the corresponding sulfur dioxide complexes [Ru(bdmpza)(O2CMe)(PPh3)(SO2)] (10a) and [Ru(bdmpza)(O2CPh)(PPh3)(SO2)] (10b) were formed in a reaction of the carboxylato complexes with gaseous SO2. None of the 2-oxocarboxylato complexes [Ru(bdmpza)(O2C(CO)R)(PPh3)2] (R = Me (3a), Et (3b), Ph (3c)) showed any reactivity toward CO or SO2, whereas the nitrosyl complex cations [Ru(bdmpza)(O2CMe)(NO)(PPh3)](+) (11) and [Ru(bdmpza)(O2C(CO)Ph)(NO)(PPh3)](+) (12) were formed in a reaction of the acetato 2a or the benzoylformato complex 3c with an excess of nitric oxide. Similar cationic carboxylato nitrosyl complexes [Ru(bdmpza)(O2CR)(NO)(PPh3)]BF4 (R = Me (13a), R = Ph (13b)) and 2-oxocarboxylato nitrosyl complexes [Ru(bdmpza)(O2C(CO)R)(NO)(PPh3)]BF4 (R = Me (14a), R = Et (14b), R = Ph (14c)) are also accessible via a reaction with NO[BF4]. X-ray crystal structures of the chlorido acetonitrile complex [Ru(bdmpza)Cl(NCMe)(PPh3)] (4), the pyridine complexes [Ru(bdmpza)(O2CMe)(PPh3)(py)] (7a) and [Ru(bdmpza)(O2CC(O)Et)(PPh3)(py)] (8b), the carbonyl complex [Ru(bdmpza)(O2CPh)(CO)(PPh3)] (9b), the sulfur dioxide complex [Ru(bdmpza)(O2CPh)(PPh3)(SO2)] (10b), as well as the nitrosyl complex [Ru(bdmpza)(O2C(CO)Me)(NO)(PPh3)]BF4 (14a), are reported. The molecular structure of the sulfur dioxide complex [Ru(bdmpza)(O2CPh)(PPh3)(SO2)] (10b) revealed a rather unusual intramolecular SO2-O2CPh Lewis acid-base adduct.     

Rhenium(V) and technetium(V) complexes with phosphoraneimine and phosphoraneiminato ligands

Air-stable rhenium(V) nitrido complexes are formed when [ReOCl3(PPh3)2], [NBu4][ReOCl4], or [NBu4][ReNCl4] are treated with an excess of silylated phosphoraneiminates of the composition Me3SiNPPh3 or Ph2P(NSiMe3)CH2PPh2 in CH2Cl2. Complexes of the compositions [ReNCl(Ph2PCH2PPh2NH)2]Cl (1), [ReN(OSiMe3)(Ph2PCH2PPh2NH)2]Cl (2) or [ReNCl2(PPh3)2] (3) were isolated and structurally characterized. The latter compound was also produced during a reaction of the rhenium(III) precursor [ReCl3(PPh3)2(CH3CN)] and Me3SiNPPh3. Nitrogen transfer from the phosphorus to the rhenium atoms and the formation of nitrido ligands were observed in all examples. All products of reactions with an excess of the potentially chelating phosphoraneiminate Me3SiNP(Ph2)CH2PPh2 contain neutral Ph2PCH2PPh2NH ligands. The required protons are supplied by a metal-induced decomposition of the solvent dichloromethane. The Re-N(imine) bond lengths (2.055-2.110 A) indicate single bonds, whereas the N-P bond with lengths between 1.596 A and 1.611 A reflect considerable double bond character. An oxorhenium(V) phosphoraneiminato complex, the dimeric compound [ReOCl2(mu-N-Ph2PCH2PPh2N)]2 (4), is formed during the reaction of [NBu4][ReOCl4] with an equivalent amount of Ph2P(NSiMe3)CH2PPh in dry acetonitrile. The blue neutral complex with two bridging phosphoraneiminato units is stable as a solid and in dry solvents. It decomposes in solution, when traces of water are present. The rhenium-nitrogen distances of 2.028(3) and 2.082(3) A are in the typical range of bridging phosphoraneiminates and an almost symmetric bonding mode. Technetium complexes with phosphoraneimine ligands were isolated from reactions of [NBu4][TcOCl4] with Me3SiNPPh3, and [NBu4][TcNCl4] with Me3SiNP(Ph2)CH2PPh2. Nitrogen transfer and the formation of a five-coordinate nitrido species, [TcNCl2(HNPPh3)2] (5), was observed in the case of the oxo precursor, whereas reduction of the technetium(VI) starting material and the formation of the neutral technetium(V) complex [TcNCl2(Ph2PCH2PPh2NH)] (6) or [TcNCl(Ph2PCH2PPh2NH)2]Cl (7) was observed in the latter case. Both technetium complexes are air stable and X-ray structure determinations show bonding modes of the phosphoraneimines similar to those in the rhenium complexes.     

Complexation of the triply-bonded dirhenium(II) complex Re(2)Cl(4)(mu-dppm)(2) (dppm = Ph(2)PCH(2)PPh(2)) by up to three acetylene molecules

The triply bonded dirhenium(II) synthons Re(2)X(4)(mu-dppm)(2) (X = Cl, Br; dppm = Ph(2)PCH(2)PPh(2)) react with acetylene at room temperature in CH(2)Cl(2) and acetone to afford the bis(acetylene) complexes Re(2)X(4)(mu-dppm)(2)(mu:eta(2),eta(2)-HCCH)(eta(2)-HCCH) (X = Cl (3), Br(4)). Compound 3 has been derivatized by reaction with RNC ligands in the presence of TlPF(6) to give unsymmetrical complexes of the type [Re(2)Cl(3)(mu-dppm)(2)(mu:eta(2),eta(2)-HCCH)(eta(2)-HCCH)(CNR)]PF(6) (R = Xyl (5), Mes (6), t-Bu (7)), in which the RCN ligand has displaced the chloride ligand cis to the eta(2)-HCCH ligand. The reaction of 3 with an additional 1 equiv of acetylene in the presence of TlPF(6) gives the symmetrical all-cis isomer of [Re(2)Cl(3)(mu-dppm)(2)(mu:eta(2),eta(2)-HCCH)(eta(2)-HCCH)(2)]PF(6) (8). The two terminal eta(2)-HCCH ligands in 8 are very labile and can be displaced by CO and XylNC to give the complexes [Re(2)Cl(3)(mu-dppm)(2)(mu:eta(2),eta(2)-HCCH)(L)(2)]Y (L = CO when Y = PF(6) (9); L = CO when Y = (PF(6))(0.5)/(H(2)PO(4))(0.5) (10); L = XylNC when Y = PF(6) (11)). These substitution reactions proceed with retention of the all-cis stereochemistry. Single-crystal X-ray structure determinations have been carried out on complexes 3, 5, 8, 10, and 11. In no instance have we found that the acetylene ligands undergo reductive coupling reactions.     

Laser photolysis studies of the reaction of chromium(III) octaethylporphyrin complex with triphenylphosphine and triphenylphosphine oxide

The photoreaction of the chromium(III) octaethylpoprhyrin complex, [Cr(OEP)(Cl)(L)] (L = H2O, Py, OPPh3), in dichloromethane was studied using laser flash photolysis technique. Laser irradiation causes the generation of a coordinately unsaturated intermediate [Cr(OEP)(Cl)], which reacts with ligands in solution to give the parent complex, [Cr(OEP)(Cl)(L)], or a transient species, [Cr(OEP)(Cl)(H2O)], when L = Py or OPPh3. Once produced [Cr(OEP)(Cl)(H2O)] eventually exchanges the axial H2O ligand with L to regenerate [Cr(OEP)(Cl)(L)]. The kinetics of the axial ligand substitution reaction was followed spectrophotometrically, and the ligand-concentration dependence of the ligand exchange rate revealed that the reaction occurs via a limited dissociative mechanism. The photoreaction of [Cr(OEP)(Cl)(OPPh3)] containing excess PPh3 in the bulk solution leads to the unfavorable coordination of the PPh3 molecule to the chromium ion to give a transient complex, [Cr(OEP)(Cl)(PPh3)]. The dynamic and thermodynamic properties of [Cr(OEP)(Cl)(PPh3)] in solution are discussed on the basis of the kinetic parameters of the dissociation and association reactions of the PPh3 ligand together with the steric aspect of the molecular structure of the related complexes.     

Syntheses and structures of copper(I) complexes based on Cu(n)X(n) (X = Br and I; n = 1, 2 and 4) units and bis(pyridyl) ligands with longer flexible spacer

Self-assembly of four bis(pyridyl) ligands with longer flexible spacer: 1,4-bis(3-pyridylaminomethyl)benzene (L1), 1,4-bis(2-pyridylaminomethyl)benzene (L2), 1,3-bis(3-pyridylaminomethyl)benzene (L3) and 1,3-bis(2-pyridylaminomethyl)benzene (L4), and CuX (X = Br and I) leads to the formation of eight [Cu(n)X(n)]-based (X = Br and I; n = 1, 2, and 4) complexes, [Cu(2)I(2)L1(PPh(3))(4)] (1), [Cu(4)Cl(2)Br(2)(L4)(2)(PPh(3))(6)]·(CH(3)CN)(2) (2), [Cu(2)I(2)(L3)(2)] (3), {[Cu(2)Br(2)L2(PPh(3))(2)]·(CH(2)Cl(2))(2)}(n) (4), [CuIL1](n)·nCH(2)Cl(2) (5), [CuIL1](n) (6), [CuIL4](n) (7) and [Cu(2)I(2)L4](n) (8), which have been synthesized and characterized by elemental analysis, IR, TG, powder and single-crystal X-ray diffraction. Structural analyses show that the eight complexes possess an increasing dimensionality from 0D (1-3) to 1D (4) to 2D (5-8), in which 1 and 2 contain a CuX unit, 2-7 contain a Cu(2)X(2) unit and 8 contains a Cu(4)X(4) unit. Such evolvement indicates that the conformation of flexible bis(pyridyl) ligands and the participation of triphenylphosphine (PPh(3)) as a second ligand take an essential role in the framework formation of the Cu(i) complexes. Moreover, a pair of symmetry-related L3 ligands in complex 3 coordinate to the rhomboid Cu(2)I(2) dimer to form "handcuff-shaped" dinuclear structures, which are further joined together through intermolecular N-HI hydrogen bonds to furnish a 2D (4,4) layer. Although complexes 5 and 6 exhibit a similar 2D (4,4) layer constructed from L1 ligand bridging [Cu(2)I(2)](n) units, the different packing fashion of the layers leads to the formation of 3D porous frameworks of 5 and dense 3D frameworks of 6. The "twisted-boat" conformation of the Cu(4)I(4) tetramer unit in complex 8 has not been reported so far.     

Rhenium(V) oxo complexes with acetylacetone derived Schiff bases: structure and catalytic epoxidation

Substitution reactions of rhenium(V) oxo precursors [ReOCl3(PPh3)2] or [NBu4][ReOCl4] with the bidentate acetylacetone-derived ketoamine ligands APOH = 4-anilino-3-penten-2-one, DPOH = 4-[2,6-dimethylanilino]-3-penten-2-one, and MTPOH = 4-[2-(methylthio)anilino]-3-penten-2-one gave the complexes [ReO(APO)Cl2(PPh3)] (1), [ReO(DPO)Cl2(PPh3)] (2), and [NBu4][ReOLCl3] (3, L = APO; 4, L = DPO; 5, L = MTPO), respectively. All complexes exhibit only one ketoamino chelate, independent of the amount of ligand added to the rhenium precursors. The complexes were characterized by 1H and 13C NMR spectroscopy. X-ray crystal structures of the complexes 1, 2, 4, and 5, including that of MTPOH, were determined, revealing the trans position of the two oxygen atoms and the trans-Cl,Cl conformation in 1 and 2, in contrast to most other rhenium complexes of this type where the cis-Cl,Cl conformation is observed. Coordination of the potentially tridentate ligand MTPOH in 5 is bidentate with a dangling thioether substituent. Compound 2 shows catalytic activity in the oxidation of cis-cyclooctene with tert-butylhydroperoxide.     

Rhenium and technetium complexes with tridentate N-[(N',N'-dialkylamino)(thiocarbonyl)]-N'-substituted benzamidine ligands

N-[(Dialkylamino)(thiocarbonyl)]benzimidoyl chlorides react with functionalized amines such as 2-aminophenol, 2-methylaminopyridine, and 2-aminobenzoic acid in clean and high-yield procedures with the formation of the novel tridentate N-[(N', N'-dialkylamino)(thiocarbonyl)]- N'-substituted benzamidine ligands H2L1, HL2, and H2L3. By starting from (NBu4)[MOCl4] (M = Re, Tc) or [ReOCl3(PPh3)2] and H2L1, a series of oxorhenium(V) and oxotechnetium(V) complexes of the composition [MOCl(L1)] were synthesized and characterized by spectroscopic methods and X-ray crystallography. The monomeric, five-coordinate compounds are air-stable and bind (L1)(2-) tridentate in the equatorial coordination sphere. Dimeric products of the compositions [(ReOCl(L2))2O] and [ReOCl(L3)]2 were isolated during reactions with HL2 and H2L3. While dimerization in [(ReOCl(L2))2O] is established via an oxo bridge, the metal atoms in [ReOCl(L3)]2 are connected by the carboxylic group of the ligand, and the product represents the first example of a high-oxidation state rhenium complex displaying such a bonding feature.     

Preparation and characterization of oxorhenium(V) complexes with 2,2'-biimidazole: the strong affinity of coordinated biimidazole for chloride ions via N-H...Cl- hydrogen bonding

N,N'-Dimethylbiimidazole and bipyridine (N-N) react with ReOCl3(OPPh3)(Me2S) to give mer-ReOCl3(N-N) compounds. Nonmethylated biimidazole forms a trans-O,O [ReOCl2(OPPh3)(biimH2)]+ cation, which is tightly associated with the Cl- counterion via N-H...Cl- hydrogen bonding. Hydrolysis of ReOCl3(biimMe2) in wet acetone (5% water) leads to the linear oxo-bridged dinuclear species [(OReCl2(biimMe2)2(mu-O)] containing chelated biimMe2. Acetone solutions containing only 1% water yield the bent oxo-bridged dinuclear species [(OReCl2)2(mu-O)(mu-biimMe2)2], where each Re center retains the ReO2Cl2N2 coordination but the biimMe2 ligands are bridging. The linear oxo-bridged [(OReCl2(biimH2)2(mu-O)] complex obtained with nonmethylated biimidazole includes two Cl- ions held via N-H...Cl- hydrogen bonds, leading to a dianionic [(OReCl2(biimH2...Cl)2(mu-O)]2- unit in the crystals of the PPh4+ salt. The compounds are characterized by IR and NMR spectroscopies, and the structures of [ReOCl2(OPPh3)(biimH2)]Cl, [(OReCl2(biimH2)2(mu-O)](PPh4Cl)(2).2H2O, and [(OReCl2)2(mu-O)(mu-biimMe2)2].acetone are determined by X-ray diffraction.     

Re(V) and Re(III) complexes with sal2phen and triphenylphosphine: rearrangement, oxidation and reduction

Reactions of Re(V), tetradentate Schiff base complexes with tertiary phosphines have previously yielded both rearranged Re(V) and reduced Re(III) complexes. To further understand this chemistry, the rigid diiminediphenol (N(2)O(2)) Schiff base ligand sal(2)phen (N,N'-o-phenylenebis(salicylaldimine)) was reacted with (n-Bu(4)N)[ReOCl(4)] to yield trans-[ReOCl(sal(2)phen)] (1). On reaction with triphenylphosphine (PPh(3)), a rearranged Re(V) product cis-[ReO(PPh(3))(sal(2)phen*)]PF(6) (2), in which one of the imines was reduced to an amine during the reaction, and the reduced Re(III) products trans-[ReCl(PPh(3))(sal(2)phen)] (4) and trans-[Re(PPh(3))(2)(sal(2)phen)](+) (5) were isolated. Reaction of sal(2)phen with [ReCl(3)(PPh(3))(2)(CH(3)CN)] resulted in the isolation of [ReCl(2)(PPh(3))(2)(salphen)] (3). The compounds were characterized using standard spectroscopic methods, elemental analyses and single crystal X-ray crystallography.     

Iridium(III) complexes formed by O-H and/Or C-H activation of 2-(arylazo)phenols

Reaction of 2-(arylazo)phenols with [Ir(PPh(3))(3)Cl] in refluxing ethanol in the presence of a base (NEt(3)) affords complexes of three different types, viz. [Ir(PPh(3))(2)(NO-R)(H)Cl] (R = OCH(3), CH(3), H, Cl and NO(2)), [Ir(PPh(3))(2)(NO-R)(H)(2)] and [Ir(PPh(3))(2)(CNO-R)(H)]. Structures of the [Ir(PPh(3))(2)(NO-Cl)(H)Cl], [Ir(PPh(3))(2)(NO-Cl)(H)(2)] and [Ir(PPh(3))(2)(CNO-Cl)(H)] complexes have been determined by X-ray crystallography. In the [Ir(PPh(3))(2)(NO-R)(H)Cl] and [Ir(PPh(3))(2)(NO-R)(H)(2)] complexes, the 2-(arylazo)phenolate ligands are coordinated to the metal center as monoanionic bidentate N,O-donors, whereas in the [Ir(PPh(3))(2)(CNO-R)(H)] complexes, they are coordinated to iridium as dianionic tridentate C,N,O-donors. In all three products formed in ethanol, the two PPh(3) ligands are trans. Reaction of 2-(arylazo)phenols with [Ir(PPh(3))(3)Cl] in refluxing toluene in the presence of NEt(3) affords complexes of two types, viz. [Ir(PPh(3))(2)(CNO-R)(H)] and [Ir(PPh(3))(2)(CNO-R)Cl]. Structure of the [Ir(PPh(3))(2)(CNO-Cl)Cl] complex has been determined by X-ray crystallography, and the 2-(arylazo)phenolate ligand is coordinated to the metal center as a dianionic tridentate C,N,O-donor and the two PPh(3) ligands are cis. All of the iridium(III) complexes show intense MLCT transitions in the visible region. Cyclic voltammetry shows an Ir(III)-Ir(IV) oxidation on the positive side of SCE and an Ir(III)-Ir(II) reduction on the negative side for all of the products.     

Ruthenium(II) complexes containing the pentadentate SNNNS chelating ligand 2,6–diacetylpyridine bis(4–(p-tolyl)thiosemicarbazone). Synthesis,reactivity and electrochemistry

Ruthenium(II) heptacoordinate complexes containing the pentadentate SNNNS chelating ligand 2,6–diacetylpyridine bis(4–(p-tolyl)thiosemicarbazone) (L1H2) have been prepared. The compounds were of the type Ru(L1H2)X2 [X=Cl (1);Br (2); SCN (3)],[Ru(L1H2)- (Y)Cl]Cl [Y=imidazole (4); pyridine-N-oxide (5)] and [Ru(L1H2)(PPh3)X]Y, [X=Cl (6), (7);Br (8); Y=ClO4/ PF6]. The complexes were characterised by i.r., u.v.–vis. and n.m.r. spectroscopy and their electrochemical behaviour was examined by cyclic voltammetry. They exhibit a reversible to quasi-reversible RuII/RuIII couple in MeCN solution at a glassy carbon working electrode using an Ag/AgCl electrode as the reference. This revised version was published online in June 2006 with corrections to the Cover Date.     

Transition metal complexes bearing a 2,2-bis(3,5-dimethylpyrazol-1-yl)propionate ligand: one methyl more matters

The new N,N,O ligand 2,2-bis(3,5-dimethylpyrazol-1-yl)propionic acid (2,2-Hbdmpzp) (2) and its transition metal complexes [Mn(2,2-bdmpzp)(CO)(3)] (3), [Re(2,2-bdmpzp)(CO)(3)] (4), [Cu(2,2-bdmpzp)(2)] (5), and [Ru(2,2-bdmpzp)Cl(L)(PPh(3))] [L = PPh(3) (6), N(2) (7), CO (8a/b), SO(2) (9a/b)] have been synthesized, characterized and compared to analogous complexes bearing a bis(3,5-dimethylpyrazol-1-yl)acetic acid. It was found that the additional methyl group has a remarkable influence on the stability and reactivity of transition metal complexes.     

Synthesis, reactivity, spectroscopic characterization, X-ray structures, PGSE, and NOE NMR studies of (eta5-C5Me5)-rhodium and -iridium derivatives containing bis(pyrazolyl)alkane ligands

Rhodium(III) and iridium(III) complexes containing bis(pyrazolyl)methane ligands (pz = pyrazole, L' in general; specifically, L1 = H2C(pz)2, L2 = H2C(pzMe2)2, L3 = H2C(pz4Me)2, L4 = Me2C(pz)2), have been prepared in a study exploring the reactivity of these ligands toward [Cp*MCl(mu-Cl)]2 dimers (M = Rh, Ir; Cp* = pentamethylcyclopentadienyl). When the reaction was carried out in acetone solution, complexes of the type [Cp*M(L')Cl]Cl were obtained. However, when L1 and L2 ligands have been employed with excess [Cp*MCl(mu-Cl)]2, the formation of [Cp*M(L')Cl][Cp*MCl3] species has been observed. PGSE NMR measurements have been carried out for these complexes, in which the counterion is a cyclopentadienyl metal complex, in CD2Cl2 as a function of the concentration. The hydrodynamic radius (rH) and, consequently, the hydrodynamic volume (VH) of all the species have been determined from the measured translational self-diffusion coefficients (Dt), indicating the predominance of ion pairs in solution. NOE measurements and X-ray single-crystal studies suggest that the [Cp*MCl3]- approaches the cation, orienting the three Cl-legs of the "piano-stool" toward the CH2 moieties of the bis(pyrazolyl)methane ligands. The reaction of 1 equiv of [Cp*M(L')Cl]Cl or [Cp*M(L')Cl][Cp*MCl3] with 1 equiv of AgX (X = ClO4 or CF3SO3) in CH2Cl2 allows the generation of [Cp*M(L')Cl]X, whereas the reaction of 1 equiv of [Cp*M(L')Cl] with 2 equiv of AgX yields the dicationic complexes [Cp*M(L')(H2O)][X]2, where single water molecules are directly bonded to the metal atoms. The solid-state structures of a number of complexes were confirmed by X-ray crystallographic studies. The reaction of [Cp*Ir(L')(H2O)][X]2 with ammonium formate in water or acetone solution allows the generation of the hydride species [Cp*Ir(L')H][X].     

The first acetimine gold(I) and gold(III) complexes and the first acetonine complexes

Ketimino(phosphino)gold(I) complexes of the type [Au[NR=C(Me)R']L]X (X = ClO4, R = H, L = PPh3, R'=Me (la), Et (2a); L=PAr3 (Ar=C6H4OMe-4), R'=Me (1b), Et (2b); L=PPh3, R=R'=Me (3); X= CF3SO3 (OTf), L=PPh3, R=R'=Me (3'); R=Ar, R'=Me (4)) have been prepared from [Au(acac)L] (acac = acetyl acetonate) and ammonium salts [RNH3]X dissolved in the appropriate ketone MeC(O)R'. Complexes [Au(NH=CMe2)2]X (X = C1O4 (6), OTf (6')) were obtained from solutions of [Au(NH3)2]X in acetone. The reaction of 6 with PPN[AuCl2] or with PhICl2 gave [AuCl(NH=CMe2)] (7) or [AuCI2(NH=CMe2)2]ClO4 (8), respectively. Complex 7 was oxidized with PhICl2 to give [AuCl3(NH=CMe2)] (9). The reaction of [AuCl(tht)] (tht = tetrahydrothiophene), NaClO4, and ammonia in acetone gave [Au(acetonine)2]ClO4 (10) (acetonine = 2,2,4,4,6-pentamethyl-2,3,4,5-tetrahydropyrimidine) which reacted with PPh3 or with PPN[AuCl2] to give [Au(PPh3)(acetonine)]ClO4 (11) or [AuCl(acetonine)] (12), respectively. Complex 11 reacts with [Au(PPh3)(Me2CO)]ClO4 to give [(AuPPh3)2(mu-acetonine)](ClO4)2 (13). The reaction of AgClO4 with acetonine gave [Ag(acetonine)(OClO3)] (14). The crystal structures of [Au(NH2Ar)(PPh3)]OTf (5), 6' and 10 have been determined.     

Homobinuclear cyanide-bridged linkage isomers containing the redox-active unit [(micro-XY)Ru(CO)2L(o-O2C6Cl4)] (XY=CN or NC)

The salts [NEt4][Ru(CN)(CO)2L(o-O2C6Cl4)] {L=PPh3 or P(OPh)3}, which undergo one-electron oxidation at the catecholate ligand to give neutral semiquinone complexes [Ru(CN)(CO)2L(o-O2C6Cl4)], react with the dimers [{Ru(CO)2L(micro-o-O2C6Cl4)}2] {L=PPh3 or P(OPh)3} to give [NEt4][(o-O2C6Cl4)L(OC)2Ru(micro-CN)Ru(CO)2L'(o-O2C6Cl4)] {L or L'=PPh3 or P(OPh)3}. The cyanide-bridged binuclear anions are, in turn, reversibly oxidised to isolable neutral and cationic complexes [(o-O2C6Cl4)L(OC)2Ru(micro-CN)Ru(CO)2L'(o-O2C6Cl4)] and [(o-O2C6Cl4)L(OC)2Ru(micro-CN)Ru(CO)2L'(o-O2C6Cl4)]+ which contain one and two semiquinone ligands respectively. Structural studies on the redox pair [(o-O2C6Cl4)(Ph3P)(OC)2Ru(micro-CN)Ru(CO)2(PPh3)(o-O2C6Cl4)]- and [(o-O2C6Cl4)(Ph3P)(OC)2Ru(micro-CN)Ru(CO)2(PPh3)(o-O2C6Cl4)] confirm that the C-bound Ru(CO)2(o-O2C6Cl4) fragment is oxidised first. Uniquely, [(o-O2C6Cl4){(PhO)3P}(OC)2Ru(micro-CN)Ru(CO)2(PPh3)(o-O2C6Cl4)]- is oxidised first at the N-bound fragment, indicating that it is possible to control the site of electron transfer by tuning the co-ligands. Crystallisation of [(o-O2C6Cl4)(Ph3P)(OC)2Ru(micro-CN)Ru(CO)2{P(OPh)3}(o-O2C6Cl4)] resulted in the formation of an isomer in which the P(OPh)3 ligand is cis to the cyanide bridge, contrasting with the trans arrangement of the X-Ru-L fragment in all other complexes of the type RuX(CO)2L(o-O2C6Cl4).