光纤放大器受激布里渊散射效应抑制

提出了一种多波长窄线宽光纤放大器,其种子光由多个单频激光耦合而成,所有单频激光波长几乎相等（波长间隔小于1 nm）,频率间隔大于两倍布里渊频移。建立了此类多波长窄线宽光纤放大器的完整理论模型,分析了放大器中受激布里渊散射（SBS）与种子数目的关系。搭建了双波长和三波长窄线宽光纤放大器,进行SBS阈值输出功率测定实验。实验结果与理论模拟结果基本一致,验证了理论模型的合理性;双波长和三波长放大可以有效抑制SBS效应,大幅提高放大器输出功率。     

相位调制信号对窄线宽光纤放大器线宽特性和受激布里渊散射阈值的影响

高功率窄线宽光纤放大器的输出功率主要受限于受激布里渊散射(SBS)效应,通过相位调制进行线宽展宽可以有效抑制SBS效应.基于窄线宽光纤放大器中的SBS动力学模型,研究了正弦信号、白噪声信号和伪随机编码信号(PRBS)对窄线宽光纤放大器光谱特性与SBS阈值的影响.研究发现,采用不同信号进行相位调制时,调制频率和调制深度等参数对调制后激光光谱的谱线间隔、谱线数目与光谱平整度的影响存在较大差异,进而影响放大器的线宽特性和SBS阈值.通过对比分析,给出了调制信号的类型选择和参数优化原则,能够为窄线宽光纤放大器的相位调制系统设计提供参考.     

大功率单频多芯光纤放大器中抑制受激布里渊散射的分析

针对多芯光纤完善了描述抽运光、信号光和Stokes信号的速率方程组.考虑了温差对受激布里渊散射的影响,利用有限元法求解温度分布方程组,分析了前向和后向抽运方式、对流系数、Stokes初始功率、光纤掺杂粒子密度和光纤长度对受激布里渊散射增益的影响.研究表明：后向抽运方式在抑制受激布里渊散射方面具有明显优势;减小对流系数有助于抑制受激布里渊散射;提高光纤掺杂密度能够加强抑制受激布里渊散射,同时也有助于提高光纤放大器的斜率效率.比较了在相同最佳光纤长度条件下,单芯和19芯光纤放大器的最高工作温度和受激布里渊散射 关键词： 光纤放大器 受激布里渊散射 大功率 有限元法     

基于受激布里渊散射的波长间隔可变多波长光纤激光器

提出了一个基于自激发受激布里渊散射的波长间隔可变多波长光纤激光器.利用单模光纤中自激发产生的非线性布里渊增益和掺铒光纤的线性增益组成混合增益光纤激光器,从而使光纤激光器在室温下产生稳定的多波长输出.改变双折射光纤环镜滤波器中保偏光纤的长度,可以实现波长间隔可变多波长激光产生,提高了多波长光纤激光器操作的灵活性和实用性.实验实现了波长间隔从0.8nm至0.076nm可变的多波长激光产生,波长数随波长间隔减小而增加,间隔为0.08nm的激光波长数达86.     

基于受激布里渊散射的波长间隔可变多波长光纤激光器

提出了一个基于自激发受激布里渊散射的波长间隔可变多波长光纤激光器.利用单模光纤中自激发产生的非线性布里渊增益和掺铒光纤的线性增益组成混合增益光纤激光器,从而使光纤激光器在室温下产生稳定的多波长输出.改变双折射光纤环镜滤波器中保偏光纤的长度,可以实现波长间隔可变多波长激光产生,提高了多波长光纤激光器操作的灵活性和实用性.实验实现了波长间隔从0.8 nm至0.076 nm可变的多波长激光产生,波长数随波长间隔减小而增加,间隔为0.08 nm的激光波长数达86.     

光纤放大器中的受激布里渊散射阈值

 从受激布里渊散射(SBS)耦合波理论出发,根据双包层光纤放大器中的受激布里渊散射阈值模型,理论仿真了信号带宽、纤芯直径、放大器增益对SBS阈值的影响,并从实验上研究了单频百纳秒脉冲信号在掺镱双包层光纤放大器中的受激布里渊散射现象。实验中输入脉冲信号重复频率1 Hz,脉宽200 ns,对不同的输入脉冲信号放大,前向放大脉冲在脉冲能量660 nJ、峰值功率3.3 W时出现畸变,产生后向SBS窄脉冲,达到了SBS阈值,实验计算的SBS阈值与理论分析结果基本一致。     

光纤放大器中的受激布里渊散射阈值

从受激布里渊散射(SBS)耦合波理论出发,根据双包层光纤放大器中的受激布里渊散射阈值模型,理论仿真了信号带宽、纤芯直径、放大器增益对SBS阈值的影响,并从实验上研究了单频百纳秒脉冲信号在掺镱双包层光纤放大器中的受激布里渊散射现象。实验中输入脉冲信号重复频率1 Hz,脉宽200 ns,对不同的输入脉冲信号放大,前向放大脉冲在脉冲能量660 nJ、峰值功率3.3 W时出现畸变,产生后向SBS窄脉冲,达到了SBS阈值,实验计算的SBS阈值与理论分析结果基本一致。     

掺饵石英光纤中的受激布里渊散射

本文报导用染料调Ｑ红宝石激光（波长λ＝６９４．３ｎｍ）泵浦掺Ｅｒ＾３＋石英光纤进行的受激布里渊散射（ＳＢＳ）实验研究，测量了受激布里渊散射频，计算出掺饵石英光纤的体压缩系数，探讨了掺饵光纤中的受激布里渊散射的应用前景。     

水中受激拉曼散射的能量增强及受激布里渊散射的光学抑制

为提高液体介质中受激拉曼散射的输出能量,提出了通过温度调控来抑制受激布里渊散射的方法,设计了532 nm多纵模宽带脉冲激光泵浦的受激拉曼散射发生系统,测量了不同温度下水中前向受激拉曼散射及后向受激布里渊散射的输出能量,分析了水温、泵浦激光线宽及热散焦效应对受激拉曼散射输出能量影响的物理机制.实验结果表明:通过降低水温可实现对受激布里渊散射过程的有效抑制,同时减小热散焦效应带来的光束畸变,从而有效提高受激拉曼散射的输出能量.研究结果对液体介质中的受激拉曼散射多波长转换具有重要意义.     

Suppression of stimulated Brillouin scattering in high-power single-frequency fiber amplifiers

The effect of temperature variation along a high-power fiber amplifier on the stimulated Brillouin scattering (SBS) threshold is considered theoretically. We show that for an end-pumped rare-earth-doped double-clad fiber the inhomogeneous distribution of temperature, which is caused by the absorption of pump radiation, may result in total suppression of SBS even for output powers well above 200 W.     

Low-power phase conjugation based on stimulated Brillouin scattering in fiber amplifiers

Phase-conjugating stimulated Brillouin scattering (SBS) mirrors are frequently used to improve the brightness of solid-state lasers. With a scheme for designing fiber amplifiers as SBS phase conjugators the power requirements can be decreased by orders of magnitude; yet only low coherence is required, and high fidelity is reached. A peak power of 5 W was demonstrated to be sufficient for optical SBS phase conjugation.     

Ge-codoped fibers for mitigating stimulated Brillouin scattering in high power fiber amplifiers

Rare-earth doped fibers for high power fiber amplifiers normally have a small refractive index difference between the core and inner cladding, but have a larger core diameter than conventional telecom fibers. We take advantage of this feature as well as the difference between the optical and acoustic waveguides and proposed several fiber designs to mitigate Stimulated Brillouin scattering (SBS) to produce higher output powers. The numerical modeling shows that an increase in SBS threshold by 3-6 dB can be achieved using Ge-codopant while maintaining diffraction limited beam quality. The key parameters that can affect the SBS performance are specified and optimal parameters for SBS suppression are obtained. The study also highlights the need to take into account the effects of minor refractive index profile variation in evaluating SBS performance.     

横向受激布里渊散射的抑制

从非线性光学的耦合波理论出发,结合流体力学的连续性方程,建立了光学元件中窄带泵浦的横向受激布里渊散射的二维理论模型,并在此基础上,利用数值模拟考察泵浦光带宽增加对受激散射过程的影响。研究表明:在一定的条件下,当泵浦光带宽略大于布里渊线宽时,受激散射过程的Stokes增益将显著降低;带宽越大,Stokes增益降低得越多;当带宽大于20GHz时,可以抑制横向受激布里渊散射带来的不良影响。另外,当带宽一定时,调制频率的改变也会影响受激散射过程,可以通过数值模拟确定最佳的调制频率。     

横向受激布里渊散射的抑制

 从非线性光学的耦合波理论出发，结合流体力学的连续性方程，建立了光学元件中窄带泵浦的横向受激布里渊散射的二维理论模型，并在此基础上，利用数值模拟考察泵浦光带宽增加对受激散射过程的影响。研究表明:在一定的条件下，当泵浦光带宽略大于布里渊线宽时，受激散射过程的Stokes增益将显著降低；带宽越大，Stokes增益降低得越多；当带宽大于20GHz时，可以抑制横向受激布里渊散射带来的不良影响。另外，当带宽一定时，调制频率的改变也会影响受激散射过程，可以通过数值模拟确定最佳的调制频率。     

Investigation on the suppression of stimulated Brillouin scattering in single-frequency Raman fiber amplifiers

High power operation of single-frequency Raman fiber amplifiers (SF-RFAs) is usually limited by the onset of stimulated Brillouin scattering (SBS). In this paper, we present our theoretical investigation on the suppression of SBS in SF-RFAs, based on the intensity equations combining SBS and stimulated Raman scattering (SRS). The effects of increasing the mode area of fiber and utilizing temperature and strain gradients along the fiber on the suppression of SBS are discussed. The simulation results suggest that it is not an advisable method to suppress SBS in SF-RFAs by increasing the mode area. Besides, although tensile strain and temperature gradients can suppress SBS in RFA singly, the conditions are too rigorous to realize. Based on the numerical simulation results, a feasible scheme for the suppression of SBS in RFA is proposed using the temperature gradients together with tensile strain gradients along the fiber length, resulting in an increase of ～3 times of amplifiers output power.     

Stimulated Brillouin scattering effect on gain saturation of distributed fiber Raman amplifiers

<正>Gain saturation is a significant phenomenon of fiber Raman amplifiers(FRAs).Gain figures versus signal power are well explained.For the small signal,the coupled ordinary differential equations are used,and for the large signal,the Raman gain coefficient is modified.It is shown that the saturation power of FRAs decreases with the pump power,and gain saturation is easier to occur in the forward pump scheme than in the backward pump scheme.These phenomena are well explained by the stimulated Brillouin scattering (SBS) effect.This research provides a guide to the fabrication of practical FRAs.